linux/drivers/mtd/maps/scx200_docflash.c
Adrian Bunk 59018b6d2a MTD/JFFS2: remove CVS keywords
Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includes code that printed them to the user.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:50:17 +01:00

236 lines
5.7 KiB
C

/* linux/drivers/mtd/maps/scx200_docflash.c
Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
National Semiconductor SCx200 flash mapped with DOCCS
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/pci.h>
#include <linux/scx200.h>
#define NAME "scx200_docflash"
MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>");
MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver");
MODULE_LICENSE("GPL");
static int probe = 0; /* Don't autoprobe */
static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */
static unsigned width = 8; /* Default to 8 bits wide */
static char *flashtype = "cfi_probe";
module_param(probe, int, 0);
MODULE_PARM_DESC(probe, "Probe for a BIOS mapping");
module_param(size, int, 0);
MODULE_PARM_DESC(size, "Size of the flash mapping");
module_param(width, int, 0);
MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)");
module_param(flashtype, charp, 0);
MODULE_PARM_DESC(flashtype, "Type of MTD probe to do");
static struct resource docmem = {
.flags = IORESOURCE_MEM,
.name = "NatSemi SCx200 DOCCS Flash",
};
static struct mtd_info *mymtd;
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition partition_info[] = {
{
.name = "DOCCS Boot kernel",
.offset = 0,
.size = 0xc0000
},
{
.name = "DOCCS Low BIOS",
.offset = 0xc0000,
.size = 0x40000
},
{
.name = "DOCCS File system",
.offset = 0x100000,
.size = ~0 /* calculate from flash size */
},
{
.name = "DOCCS High BIOS",
.offset = ~0, /* calculate from flash size */
.size = 0x80000
},
};
#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
#endif
static struct map_info scx200_docflash_map = {
.name = "NatSemi SCx200 DOCCS Flash",
};
static int __init init_scx200_docflash(void)
{
unsigned u;
unsigned base;
unsigned ctrl;
unsigned pmr;
struct pci_dev *bridge;
printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
if ((bridge = pci_get_device(PCI_VENDOR_ID_NS,
PCI_DEVICE_ID_NS_SCx200_BRIDGE,
NULL)) == NULL)
return -ENODEV;
/* check that we have found the configuration block */
if (!scx200_cb_present()) {
pci_dev_put(bridge);
return -ENODEV;
}
if (probe) {
/* Try to use the present flash mapping if any */
pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base);
pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl);
pci_dev_put(bridge);
pmr = inl(scx200_cb_base + SCx200_PMR);
if (base == 0
|| (ctrl & 0x07000000) != 0x07000000
|| (ctrl & 0x0007ffff) == 0)
return -ENODEV;
size = ((ctrl&0x1fff)<<13) + (1<<13);
for (u = size; u > 1; u >>= 1)
;
if (u != 1)
return -ENODEV;
if (pmr & (1<<6))
width = 16;
else
width = 8;
docmem.start = base;
docmem.end = base + size;
if (request_resource(&iomem_resource, &docmem)) {
printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
return -ENOMEM;
}
} else {
pci_dev_put(bridge);
for (u = size; u > 1; u >>= 1)
;
if (u != 1) {
printk(KERN_ERR NAME ": invalid size for flash mapping\n");
return -EINVAL;
}
if (width != 8 && width != 16) {
printk(KERN_ERR NAME ": invalid bus width for flash mapping\n");
return -EINVAL;
}
if (allocate_resource(&iomem_resource, &docmem,
size,
0xc0000000, 0xffffffff,
size, NULL, NULL)) {
printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
return -ENOMEM;
}
ctrl = 0x07000000 | ((size-1) >> 13);
printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl);
pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start);
pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl);
pmr = inl(scx200_cb_base + SCx200_PMR);
if (width == 8) {
pmr &= ~(1<<6);
} else {
pmr |= (1<<6);
}
outl(pmr, scx200_cb_base + SCx200_PMR);
}
printk(KERN_INFO NAME ": DOCCS mapped at 0x%llx-0x%llx, width %d\n",
(unsigned long long)docmem.start,
(unsigned long long)docmem.end, width);
scx200_docflash_map.size = size;
if (width == 8)
scx200_docflash_map.bankwidth = 1;
else
scx200_docflash_map.bankwidth = 2;
simple_map_init(&scx200_docflash_map);
scx200_docflash_map.phys = docmem.start;
scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size);
if (!scx200_docflash_map.virt) {
printk(KERN_ERR NAME ": failed to ioremap the flash\n");
release_resource(&docmem);
return -EIO;
}
mymtd = do_map_probe(flashtype, &scx200_docflash_map);
if (!mymtd) {
printk(KERN_ERR NAME ": unable to detect flash\n");
iounmap(scx200_docflash_map.virt);
release_resource(&docmem);
return -ENXIO;
}
if (size < mymtd->size)
printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n");
mymtd->owner = THIS_MODULE;
#ifdef CONFIG_MTD_PARTITIONS
partition_info[3].offset = mymtd->size-partition_info[3].size;
partition_info[2].size = partition_info[3].offset-partition_info[2].offset;
add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
#else
add_mtd_device(mymtd);
#endif
return 0;
}
static void __exit cleanup_scx200_docflash(void)
{
if (mymtd) {
#ifdef CONFIG_MTD_PARTITIONS
del_mtd_partitions(mymtd);
#else
del_mtd_device(mymtd);
#endif
map_destroy(mymtd);
}
if (scx200_docflash_map.virt) {
iounmap(scx200_docflash_map.virt);
release_resource(&docmem);
}
}
module_init(init_scx200_docflash);
module_exit(cleanup_scx200_docflash);
/*
Local variables:
compile-command: "make -k -C ../../.. SUBDIRS=drivers/mtd/maps modules"
c-basic-offset: 8
End:
*/