eccd15aad7
The frontend attachment code didn't handle cases where the frontend partially failed to attach. For instance, when the demod was attached successfully but the tuner driver wasn't compiled or fails to init for some reason. In these cases we try to clean up the partial attachment and fail instead of proceeding with a broken frontend. If frontend registration fails, clean up with dvb_frontend_detach() rather than just calling the frontend's main release method. The former does some additional stuff, like release an attached tuner and take care of putting symbols when dynamic binding is used. In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that gets set before skystar2_rev23_attach() is called. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
775 lines
18 KiB
C
775 lines
18 KiB
C
/*
|
|
* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
|
|
* flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling
|
|
* see flexcop.c for copyright information
|
|
*/
|
|
#include <media/tuner.h>
|
|
#include "flexcop.h"
|
|
#include "mt312.h"
|
|
#include "stv0299.h"
|
|
#include "s5h1420.h"
|
|
#include "itd1000.h"
|
|
#include "cx24113.h"
|
|
#include "cx24123.h"
|
|
#include "isl6421.h"
|
|
#include "mt352.h"
|
|
#include "bcm3510.h"
|
|
#include "nxt200x.h"
|
|
#include "dvb-pll.h"
|
|
#include "lgdt330x.h"
|
|
#include "tuner-simple.h"
|
|
#include "stv0297.h"
|
|
|
|
/* lnb control */
|
|
#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
|
|
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
|
|
{
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
flexcop_ibi_value v;
|
|
deb_tuner("polarity/voltage = %u\n", voltage);
|
|
|
|
v = fc->read_ibi_reg(fc, misc_204);
|
|
switch (voltage) {
|
|
case SEC_VOLTAGE_OFF:
|
|
v.misc_204.ACPI1_sig = 1;
|
|
break;
|
|
case SEC_VOLTAGE_13:
|
|
v.misc_204.ACPI1_sig = 0;
|
|
v.misc_204.LNB_L_H_sig = 0;
|
|
break;
|
|
case SEC_VOLTAGE_18:
|
|
v.misc_204.ACPI1_sig = 0;
|
|
v.misc_204.LNB_L_H_sig = 1;
|
|
break;
|
|
default:
|
|
err("unknown SEC_VOLTAGE value");
|
|
return -EINVAL;
|
|
}
|
|
return fc->write_ibi_reg(fc, misc_204, v);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
|
|
|| defined(CONFIG_DVB_MT312_MODULE)
|
|
static int flexcop_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
if (fc->fe_sleep)
|
|
return fc->fe_sleep(fe);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* SkyStar2 DVB-S rev 2.3 */
|
|
#if defined(CONFIG_DVB_MT312_MODULE)
|
|
static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
|
|
{
|
|
/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
flexcop_ibi_value v;
|
|
u16 ax;
|
|
v.raw = 0;
|
|
deb_tuner("tone = %u\n",tone);
|
|
|
|
switch (tone) {
|
|
case SEC_TONE_ON:
|
|
ax = 0x01ff;
|
|
break;
|
|
case SEC_TONE_OFF:
|
|
ax = 0;
|
|
break;
|
|
default:
|
|
err("unknown SEC_TONE value");
|
|
return -EINVAL;
|
|
}
|
|
|
|
v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
|
|
v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
|
|
v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
|
|
return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
|
|
}
|
|
|
|
static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
|
|
{
|
|
flexcop_set_tone(fe, SEC_TONE_ON);
|
|
udelay(data ? 500 : 1000);
|
|
flexcop_set_tone(fe, SEC_TONE_OFF);
|
|
udelay(data ? 1000 : 500);
|
|
}
|
|
|
|
static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
|
|
{
|
|
int i, par = 1, d;
|
|
for (i = 7; i >= 0; i--) {
|
|
d = (data >> i) & 1;
|
|
par ^= d;
|
|
flexcop_diseqc_send_bit(fe, d);
|
|
}
|
|
flexcop_diseqc_send_bit(fe, par);
|
|
}
|
|
|
|
static int flexcop_send_diseqc_msg(struct dvb_frontend *fe,
|
|
int len, u8 *msg, unsigned long burst)
|
|
{
|
|
int i;
|
|
|
|
flexcop_set_tone(fe, SEC_TONE_OFF);
|
|
mdelay(16);
|
|
|
|
for (i = 0; i < len; i++)
|
|
flexcop_diseqc_send_byte(fe,msg[i]);
|
|
mdelay(16);
|
|
|
|
if (burst != -1) {
|
|
if (burst)
|
|
flexcop_diseqc_send_byte(fe, 0xff);
|
|
else {
|
|
flexcop_set_tone(fe, SEC_TONE_ON);
|
|
mdelay(12);
|
|
udelay(500);
|
|
flexcop_set_tone(fe, SEC_TONE_OFF);
|
|
}
|
|
msleep(20);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe,
|
|
struct dvb_diseqc_master_cmd *cmd)
|
|
{
|
|
return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
|
|
}
|
|
|
|
static int flexcop_diseqc_send_burst(struct dvb_frontend *fe,
|
|
fe_sec_mini_cmd_t minicmd)
|
|
{
|
|
return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
|
|
}
|
|
|
|
static struct mt312_config skystar23_samsung_tbdu18132_config = {
|
|
.demod_address = 0x0e,
|
|
};
|
|
|
|
static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *params)
|
|
{
|
|
u8 buf[4];
|
|
u32 div;
|
|
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf,
|
|
.len = sizeof(buf) };
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
div = (params->frequency + (125/2)) / 125;
|
|
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = (div >> 0) & 0xff;
|
|
buf[2] = 0x84 | ((div >> 10) & 0x60);
|
|
buf[3] = 0x80;
|
|
|
|
if (params->frequency < 1550000)
|
|
buf[3] |= 0x02;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static int skystar2_rev23_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
|
|
if (fc->fe != NULL) {
|
|
struct dvb_frontend_ops *ops = &fc->fe->ops;
|
|
ops->tuner_ops.set_params =
|
|
skystar23_samsung_tbdu18132_tuner_set_params;
|
|
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
|
|
ops->diseqc_send_burst = flexcop_diseqc_send_burst;
|
|
ops->set_tone = flexcop_set_tone;
|
|
ops->set_voltage = flexcop_set_voltage;
|
|
fc->fe_sleep = ops->sleep;
|
|
ops->sleep = flexcop_sleep;
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* SkyStar2 DVB-S rev 2.6 */
|
|
#if defined(CONFIG_DVB_STV0299_MODULE)
|
|
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
|
|
u32 srate, u32 ratio)
|
|
{
|
|
u8 aclk = 0;
|
|
u8 bclk = 0;
|
|
|
|
if (srate < 1500000) {
|
|
aclk = 0xb7; bclk = 0x47;
|
|
} else if (srate < 3000000) {
|
|
aclk = 0xb7; bclk = 0x4b;
|
|
} else if (srate < 7000000) {
|
|
aclk = 0xb7; bclk = 0x4f;
|
|
} else if (srate < 14000000) {
|
|
aclk = 0xb7; bclk = 0x53;
|
|
} else if (srate < 30000000) {
|
|
aclk = 0xb6; bclk = 0x53;
|
|
} else if (srate < 45000000) {
|
|
aclk = 0xb4; bclk = 0x51;
|
|
}
|
|
|
|
stv0299_writereg(fe, 0x13, aclk);
|
|
stv0299_writereg(fe, 0x14, bclk);
|
|
stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
|
|
stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
|
|
stv0299_writereg(fe, 0x21, ratio & 0xf0);
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *params)
|
|
{
|
|
u8 buf[4];
|
|
u32 div;
|
|
struct i2c_msg msg = {
|
|
.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
div = params->frequency / 125;
|
|
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = div & 0xff;
|
|
buf[2] = 0x84; /* 0xC4 */
|
|
buf[3] = 0x08;
|
|
|
|
if (params->frequency < 1500000)
|
|
buf[3] |= 0x10;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static u8 samsung_tbmu24112_inittab[] = {
|
|
0x01, 0x15,
|
|
0x02, 0x30,
|
|
0x03, 0x00,
|
|
0x04, 0x7D,
|
|
0x05, 0x35,
|
|
0x06, 0x02,
|
|
0x07, 0x00,
|
|
0x08, 0xC3,
|
|
0x0C, 0x00,
|
|
0x0D, 0x81,
|
|
0x0E, 0x23,
|
|
0x0F, 0x12,
|
|
0x10, 0x7E,
|
|
0x11, 0x84,
|
|
0x12, 0xB9,
|
|
0x13, 0x88,
|
|
0x14, 0x89,
|
|
0x15, 0xC9,
|
|
0x16, 0x00,
|
|
0x17, 0x5C,
|
|
0x18, 0x00,
|
|
0x19, 0x00,
|
|
0x1A, 0x00,
|
|
0x1C, 0x00,
|
|
0x1D, 0x00,
|
|
0x1E, 0x00,
|
|
0x1F, 0x3A,
|
|
0x20, 0x2E,
|
|
0x21, 0x80,
|
|
0x22, 0xFF,
|
|
0x23, 0xC1,
|
|
0x28, 0x00,
|
|
0x29, 0x1E,
|
|
0x2A, 0x14,
|
|
0x2B, 0x0F,
|
|
0x2C, 0x09,
|
|
0x2D, 0x05,
|
|
0x31, 0x1F,
|
|
0x32, 0x19,
|
|
0x33, 0xFE,
|
|
0x34, 0x93,
|
|
0xff, 0xff,
|
|
};
|
|
|
|
static struct stv0299_config samsung_tbmu24112_config = {
|
|
.demod_address = 0x68,
|
|
.inittab = samsung_tbmu24112_inittab,
|
|
.mclk = 88000000UL,
|
|
.invert = 0,
|
|
.skip_reinit = 0,
|
|
.lock_output = STV0299_LOCKOUTPUT_LK,
|
|
.volt13_op0_op1 = STV0299_VOLT13_OP1,
|
|
.min_delay_ms = 100,
|
|
.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
|
|
};
|
|
|
|
static int skystar2_rev26_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
|
|
if (fc->fe != NULL) {
|
|
struct dvb_frontend_ops *ops = &fc->fe->ops;
|
|
ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
|
|
ops->set_voltage = flexcop_set_voltage;
|
|
fc->fe_sleep = ops->sleep;
|
|
ops->sleep = flexcop_sleep;
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* SkyStar2 DVB-S rev 2.7 */
|
|
#if defined(CONFIG_DVB_S5H1420_MODULE)
|
|
static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
|
|
.demod_address = 0x53,
|
|
.invert = 1,
|
|
.repeated_start_workaround = 1,
|
|
.serial_mpeg = 1,
|
|
};
|
|
|
|
static struct itd1000_config skystar2_rev2_7_itd1000_config = {
|
|
.i2c_address = 0x61,
|
|
};
|
|
|
|
static int skystar2_rev27_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
flexcop_ibi_value r108;
|
|
struct i2c_adapter *i2c_tuner;
|
|
|
|
/* enable no_base_addr - no repeated start when reading */
|
|
fc->fc_i2c_adap[0].no_base_addr = 1;
|
|
fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config,
|
|
i2c);
|
|
if (!fc->fe)
|
|
goto fail;
|
|
|
|
i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
|
|
if (!i2c_tuner)
|
|
goto fail;
|
|
|
|
fc->fe_sleep = fc->fe->ops.sleep;
|
|
fc->fe->ops.sleep = flexcop_sleep;
|
|
|
|
/* enable no_base_addr - no repeated start when reading */
|
|
fc->fc_i2c_adap[2].no_base_addr = 1;
|
|
if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
|
|
0x08, 1, 1)) {
|
|
err("ISL6421 could NOT be attached");
|
|
goto fail_isl;
|
|
}
|
|
info("ISL6421 successfully attached");
|
|
|
|
/* the ITD1000 requires a lower i2c clock - is it a problem ? */
|
|
r108.raw = 0x00000506;
|
|
fc->write_ibi_reg(fc, tw_sm_c_108, r108);
|
|
if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
|
|
&skystar2_rev2_7_itd1000_config)) {
|
|
err("ITD1000 could NOT be attached");
|
|
/* Should i2c clock be restored? */
|
|
goto fail_isl;
|
|
}
|
|
info("ITD1000 successfully attached");
|
|
|
|
return 1;
|
|
|
|
fail_isl:
|
|
fc->fc_i2c_adap[2].no_base_addr = 0;
|
|
fail:
|
|
/* for the next devices we need it again */
|
|
fc->fc_i2c_adap[0].no_base_addr = 0;
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* SkyStar2 rev 2.8 */
|
|
#if defined(CONFIG_DVB_CX24123_MODULE)
|
|
static struct cx24123_config skystar2_rev2_8_cx24123_config = {
|
|
.demod_address = 0x55,
|
|
.dont_use_pll = 1,
|
|
.agc_callback = cx24113_agc_callback,
|
|
};
|
|
|
|
static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
|
|
.i2c_addr = 0x54,
|
|
.xtal_khz = 10111,
|
|
};
|
|
|
|
static int skystar2_rev28_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
struct i2c_adapter *i2c_tuner;
|
|
|
|
fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config,
|
|
i2c);
|
|
if (!fc->fe)
|
|
return 0;
|
|
|
|
i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);;
|
|
if (!i2c_tuner)
|
|
return 0;
|
|
|
|
if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config,
|
|
i2c_tuner)) {
|
|
err("CX24113 could NOT be attached");
|
|
return 0;
|
|
}
|
|
info("CX24113 successfully attached");
|
|
|
|
fc->fc_i2c_adap[2].no_base_addr = 1;
|
|
if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
|
|
0x08, 0, 0)) {
|
|
err("ISL6421 could NOT be attached");
|
|
fc->fc_i2c_adap[2].no_base_addr = 0;
|
|
return 0;
|
|
}
|
|
info("ISL6421 successfully attached");
|
|
/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
|
|
* IR-receiver (PIC16F818) - but the card has no input for that ??? */
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
/* AirStar DVB-T */
|
|
#if defined(CONFIG_DVB_MT352_MODULE)
|
|
static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
|
|
{
|
|
static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
|
|
static u8 mt352_reset[] = { 0x50, 0x80 };
|
|
static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
|
|
static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 };
|
|
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
|
|
|
|
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
|
|
udelay(2000);
|
|
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
|
|
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
|
|
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
|
|
mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
|
|
{
|
|
u32 div;
|
|
unsigned char bs = 0;
|
|
|
|
if (buf_len < 5)
|
|
return -EINVAL;
|
|
|
|
#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
|
|
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
|
|
if (params->frequency >= 48000000 && params->frequency <= 154000000) \
|
|
bs = 0x09;
|
|
if (params->frequency >= 161000000 && params->frequency <= 439000000) \
|
|
bs = 0x0a;
|
|
if (params->frequency >= 447000000 && params->frequency <= 863000000) \
|
|
bs = 0x08;
|
|
|
|
pllbuf[0] = 0x61;
|
|
pllbuf[1] = div >> 8;
|
|
pllbuf[2] = div & 0xff;
|
|
pllbuf[3] = 0xcc;
|
|
pllbuf[4] = bs;
|
|
return 5;
|
|
}
|
|
|
|
static struct mt352_config samsung_tdtc9251dh0_config = {
|
|
.demod_address = 0x0f,
|
|
.demod_init = samsung_tdtc9251dh0_demod_init,
|
|
};
|
|
|
|
static int airstar_dvbt_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
|
|
if (fc->fe != NULL) {
|
|
fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* AirStar ATSC 1st generation */
|
|
#if defined(CONFIG_DVB_BCM3510_MODULE)
|
|
static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
|
|
const struct firmware **fw, char* name)
|
|
{
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
return request_firmware(fw, name, fc->dev);
|
|
}
|
|
|
|
static struct bcm3510_config air2pc_atsc_first_gen_config = {
|
|
.demod_address = 0x0f,
|
|
.request_firmware = flexcop_fe_request_firmware,
|
|
};
|
|
|
|
static int airstar_atsc1_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
|
|
return fc->fe != NULL;
|
|
}
|
|
#endif
|
|
|
|
/* AirStar ATSC 2nd generation */
|
|
#if defined(CONFIG_DVB_NXT200X_MODULE)
|
|
static struct nxt200x_config samsung_tbmv_config = {
|
|
.demod_address = 0x0a,
|
|
};
|
|
|
|
static int airstar_atsc2_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
|
|
if (!fc->fe)
|
|
return 0;
|
|
|
|
return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
|
|
DVB_PLL_SAMSUNG_TBMV);
|
|
}
|
|
#endif
|
|
|
|
/* AirStar ATSC 3rd generation */
|
|
#if defined(CONFIG_DVB_LGDT330X_MODULE)
|
|
static struct lgdt330x_config air2pc_atsc_hd5000_config = {
|
|
.demod_address = 0x59,
|
|
.demod_chip = LGDT3303,
|
|
.serial_mpeg = 0x04,
|
|
.clock_polarity_flip = 1,
|
|
};
|
|
|
|
static int airstar_atsc3_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
|
|
if (!fc->fe)
|
|
return 0;
|
|
|
|
return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
|
|
TUNER_LG_TDVS_H06XF);
|
|
}
|
|
#endif
|
|
|
|
/* CableStar2 DVB-C */
|
|
#if defined(CONFIG_DVB_STV0297_MODULE)
|
|
static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
u8 buf[4];
|
|
u16 div;
|
|
int ret;
|
|
|
|
/* 62.5 kHz * 10 */
|
|
#define REF_FREQ 625
|
|
#define FREQ_OFFSET 36125
|
|
|
|
div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ;
|
|
/* 4 MHz = 4000 KHz */
|
|
|
|
buf[0] = (u8)( div >> 8) & 0x7f;
|
|
buf[1] = (u8) div & 0xff;
|
|
|
|
/* F(osc) = N * Reference Freq. (62.5 kHz)
|
|
* byte 2 : 0 N14 N13 N12 N11 N10 N9 N8
|
|
* byte 3 : N7 N6 N5 N4 N3 N2 N1 N0
|
|
* byte 4 : 1 * * AGD R3 R2 R1 R0
|
|
* byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1
|
|
* AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
|
|
buf[2] = 0x95;
|
|
|
|
/* Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5
|
|
* 47 - 153 0 * 0 0 0 0 0 1 0x01
|
|
* 153 - 430 0 * 0 0 0 0 1 0 0x02
|
|
* 430 - 822 0 * 0 0 1 0 0 0 0x08
|
|
* 822 - 862 1 * 0 0 1 0 0 0 0x88 */
|
|
|
|
if (fep->frequency <= 153000000) buf[3] = 0x01;
|
|
else if (fep->frequency <= 430000000) buf[3] = 0x02;
|
|
else if (fep->frequency <= 822000000) buf[3] = 0x08;
|
|
else buf[3] = 0x88;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency,
|
|
buf[0], buf[1], buf[2], buf[3]);
|
|
ret = fc->i2c_request(&fc->fc_i2c_adap[2],
|
|
FC_WRITE, 0x61, buf[0], &buf[1], 3);
|
|
deb_tuner("tuner write returned: %d\n",ret);
|
|
return ret;
|
|
}
|
|
|
|
static u8 alps_tdee4_stv0297_inittab[] = {
|
|
0x80, 0x01,
|
|
0x80, 0x00,
|
|
0x81, 0x01,
|
|
0x81, 0x00,
|
|
0x00, 0x48,
|
|
0x01, 0x58,
|
|
0x03, 0x00,
|
|
0x04, 0x00,
|
|
0x07, 0x00,
|
|
0x08, 0x00,
|
|
0x30, 0xff,
|
|
0x31, 0x9d,
|
|
0x32, 0xff,
|
|
0x33, 0x00,
|
|
0x34, 0x29,
|
|
0x35, 0x55,
|
|
0x36, 0x80,
|
|
0x37, 0x6e,
|
|
0x38, 0x9c,
|
|
0x40, 0x1a,
|
|
0x41, 0xfe,
|
|
0x42, 0x33,
|
|
0x43, 0x00,
|
|
0x44, 0xff,
|
|
0x45, 0x00,
|
|
0x46, 0x00,
|
|
0x49, 0x04,
|
|
0x4a, 0x51,
|
|
0x4b, 0xf8,
|
|
0x52, 0x30,
|
|
0x53, 0x06,
|
|
0x59, 0x06,
|
|
0x5a, 0x5e,
|
|
0x5b, 0x04,
|
|
0x61, 0x49,
|
|
0x62, 0x0a,
|
|
0x70, 0xff,
|
|
0x71, 0x04,
|
|
0x72, 0x00,
|
|
0x73, 0x00,
|
|
0x74, 0x0c,
|
|
0x80, 0x20,
|
|
0x81, 0x00,
|
|
0x82, 0x30,
|
|
0x83, 0x00,
|
|
0x84, 0x04,
|
|
0x85, 0x22,
|
|
0x86, 0x08,
|
|
0x87, 0x1b,
|
|
0x88, 0x00,
|
|
0x89, 0x00,
|
|
0x90, 0x00,
|
|
0x91, 0x04,
|
|
0xa0, 0x86,
|
|
0xa1, 0x00,
|
|
0xa2, 0x00,
|
|
0xb0, 0x91,
|
|
0xb1, 0x0b,
|
|
0xc0, 0x5b,
|
|
0xc1, 0x10,
|
|
0xc2, 0x12,
|
|
0xd0, 0x02,
|
|
0xd1, 0x00,
|
|
0xd2, 0x00,
|
|
0xd3, 0x00,
|
|
0xd4, 0x02,
|
|
0xd5, 0x00,
|
|
0xde, 0x00,
|
|
0xdf, 0x01,
|
|
0xff, 0xff,
|
|
};
|
|
|
|
static struct stv0297_config alps_tdee4_stv0297_config = {
|
|
.demod_address = 0x1c,
|
|
.inittab = alps_tdee4_stv0297_inittab,
|
|
};
|
|
|
|
static int cablestar2_attach(struct flexcop_device *fc,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
fc->fc_i2c_adap[0].no_base_addr = 1;
|
|
fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
|
|
if (!fc->fe) {
|
|
/* Reset for next frontend to try */
|
|
fc->fc_i2c_adap[0].no_base_addr = 0;
|
|
return 0;
|
|
}
|
|
fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
static struct {
|
|
flexcop_device_type_t type;
|
|
int (*attach)(struct flexcop_device *, struct i2c_adapter *);
|
|
} flexcop_frontends[] = {
|
|
#if defined(CONFIG_DVB_S5H1420_MODULE)
|
|
{ FC_SKY_REV27, skystar2_rev27_attach },
|
|
#endif
|
|
#if defined(CONFIG_DVB_CX24123_MODULE)
|
|
{ FC_SKY_REV28, skystar2_rev28_attach },
|
|
#endif
|
|
#if defined(CONFIG_DVB_STV0299_MODULE)
|
|
{ FC_SKY_REV26, skystar2_rev26_attach },
|
|
#endif
|
|
#if defined(CONFIG_DVB_MT352_MODULE)
|
|
{ FC_AIR_DVBT, airstar_dvbt_attach },
|
|
#endif
|
|
#if defined(CONFIG_DVB_NXT200X_MODULE)
|
|
{ FC_AIR_ATSC2, airstar_atsc2_attach },
|
|
#endif
|
|
#if defined(CONFIG_DVB_LGDT330X_MODULE)
|
|
{ FC_AIR_ATSC3, airstar_atsc3_attach },
|
|
#endif
|
|
#if defined(CONFIG_DVB_BCM3510_MODULE)
|
|
{ FC_AIR_ATSC1, airstar_atsc1_attach },
|
|
#endif
|
|
#if defined(CONFIG_DVB_STV0297_MODULE)
|
|
{ FC_CABLE, cablestar2_attach },
|
|
#endif
|
|
#if defined(CONFIG_DVB_MT312_MODULE)
|
|
{ FC_SKY_REV23, skystar2_rev23_attach },
|
|
#endif
|
|
};
|
|
|
|
/* try to figure out the frontend */
|
|
int flexcop_frontend_init(struct flexcop_device *fc)
|
|
{
|
|
int i;
|
|
for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
|
|
/* type needs to be set before, because of some workarounds
|
|
* done based on the probed card type */
|
|
fc->dev_type = flexcop_frontends[i].type;
|
|
if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap))
|
|
goto fe_found;
|
|
/* Clean up partially attached frontend */
|
|
if (fc->fe) {
|
|
dvb_frontend_detach(fc->fe);
|
|
fc->fe = NULL;
|
|
}
|
|
}
|
|
fc->dev_type = FC_UNK;
|
|
err("no frontend driver found for this B2C2/FlexCop adapter");
|
|
return -ENODEV;
|
|
|
|
fe_found:
|
|
info("found '%s' .", fc->fe->ops.info.name);
|
|
if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
|
|
err("frontend registration failed!");
|
|
dvb_frontend_detach(fc->fe);
|
|
fc->fe = NULL;
|
|
return -EINVAL;
|
|
}
|
|
fc->init_state |= FC_STATE_FE_INIT;
|
|
return 0;
|
|
}
|
|
|
|
void flexcop_frontend_exit(struct flexcop_device *fc)
|
|
{
|
|
if (fc->init_state & FC_STATE_FE_INIT) {
|
|
dvb_unregister_frontend(fc->fe);
|
|
dvb_frontend_detach(fc->fe);
|
|
}
|
|
fc->init_state &= ~FC_STATE_FE_INIT;
|
|
}
|