linux/lib/dynamic_queue_limits.c
Tom Herbert 75957ba36c dql: Dynamic queue limits
Implementation of dynamic queue limits (dql).  This is a libary which
allows a queue limit to be dynamically managed.  The goal of dql is
to set the queue limit, number of objects to the queue, to be minimized
without allowing the queue to be starved.

dql would be used with a queue which has these properties:

1) Objects are queued up to some limit which can be expressed as a
   count of objects.
2) Periodically a completion process executes which retires consumed
   objects.
3) Starvation occurs when limit has been reached, all queued data has
   actually been consumed but completion processing has not yet run,
   so queuing new data is blocked.
4) Minimizing the amount of queued data is desirable.

A canonical example of such a queue would be a NIC HW transmit queue.

The queue limit is dynamic, it will increase or decrease over time
depending on the workload.  The queue limit is recalculated each time
completion processing is done.  Increases occur when the queue is
starved and can exponentially increase over successive intervals.
Decreases occur when more data is being maintained in the queue than
needed to prevent starvation.  The number of extra objects, or "slack",
is measured over successive intervals, and to avoid hysteresis the
limit is only reduced by the miminum slack seen over a configurable
time period.

dql API provides routines to manage the queue:
- dql_init is called to intialize the dql structure
- dql_reset is called to reset dynamic values
- dql_queued called when objects are being enqueued
- dql_avail returns availability in the queue
- dql_completed is called when objects have be consumed in the queue

Configuration consists of:
- max_limit, maximum limit
- min_limit, minimum limit
- slack_hold_time, time to measure instances of slack before reducing
  queue limit

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:19 -05:00

133 lines
4.2 KiB
C

/*
* Dynamic byte queue limits. See include/linux/dynamic_queue_limits.h
*
* Copyright (c) 2011, Tom Herbert <therbert@google.com>
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/ctype.h>
#include <linux/kernel.h>
#include <linux/dynamic_queue_limits.h>
#define POSDIFF(A, B) ((A) > (B) ? (A) - (B) : 0)
/* Records completed count and recalculates the queue limit */
void dql_completed(struct dql *dql, unsigned int count)
{
unsigned int inprogress, prev_inprogress, limit;
unsigned int ovlimit, all_prev_completed, completed;
/* Can't complete more than what's in queue */
BUG_ON(count > dql->num_queued - dql->num_completed);
completed = dql->num_completed + count;
limit = dql->limit;
ovlimit = POSDIFF(dql->num_queued - dql->num_completed, limit);
inprogress = dql->num_queued - completed;
prev_inprogress = dql->prev_num_queued - dql->num_completed;
all_prev_completed = POSDIFF(completed, dql->prev_num_queued);
if ((ovlimit && !inprogress) ||
(dql->prev_ovlimit && all_prev_completed)) {
/*
* Queue considered starved if:
* - The queue was over-limit in the last interval,
* and there is no more data in the queue.
* OR
* - The queue was over-limit in the previous interval and
* when enqueuing it was possible that all queued data
* had been consumed. This covers the case when queue
* may have becomes starved between completion processing
* running and next time enqueue was scheduled.
*
* When queue is starved increase the limit by the amount
* of bytes both sent and completed in the last interval,
* plus any previous over-limit.
*/
limit += POSDIFF(completed, dql->prev_num_queued) +
dql->prev_ovlimit;
dql->slack_start_time = jiffies;
dql->lowest_slack = UINT_MAX;
} else if (inprogress && prev_inprogress && !all_prev_completed) {
/*
* Queue was not starved, check if the limit can be decreased.
* A decrease is only considered if the queue has been busy in
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
* the the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
*/
unsigned int slack, slack_last_objs;
/*
* Slack is the maximum of
* - The queue limit plus previous over-limit minus twice
* the number of objects completed. Note that two times
* number of completed bytes is a basis for an upper bound
* of the limit.
* - Portion of objects in the last queuing operation that
* was not part of non-zero previous over-limit. That is
* "round down" by non-overlimit portion of the last
* queueing operation.
*/
slack = POSDIFF(limit + dql->prev_ovlimit,
2 * (completed - dql->num_completed));
slack_last_objs = dql->prev_ovlimit ?
POSDIFF(dql->prev_last_obj_cnt, dql->prev_ovlimit) : 0;
slack = max(slack, slack_last_objs);
if (slack < dql->lowest_slack)
dql->lowest_slack = slack;
if (time_after(jiffies,
dql->slack_start_time + dql->slack_hold_time)) {
limit = POSDIFF(limit, dql->lowest_slack);
dql->slack_start_time = jiffies;
dql->lowest_slack = UINT_MAX;
}
}
/* Enforce bounds on limit */
limit = clamp(limit, dql->min_limit, dql->max_limit);
if (limit != dql->limit) {
dql->limit = limit;
ovlimit = 0;
}
dql->adj_limit = limit + completed;
dql->prev_ovlimit = ovlimit;
dql->prev_last_obj_cnt = dql->last_obj_cnt;
dql->num_completed = completed;
dql->prev_num_queued = dql->num_queued;
}
EXPORT_SYMBOL(dql_completed);
void dql_reset(struct dql *dql)
{
/* Reset all dynamic values */
dql->limit = 0;
dql->num_queued = 0;
dql->num_completed = 0;
dql->last_obj_cnt = 0;
dql->prev_num_queued = 0;
dql->prev_last_obj_cnt = 0;
dql->prev_ovlimit = 0;
dql->lowest_slack = UINT_MAX;
dql->slack_start_time = jiffies;
}
EXPORT_SYMBOL(dql_reset);
int dql_init(struct dql *dql, unsigned hold_time)
{
dql->max_limit = DQL_MAX_LIMIT;
dql->min_limit = 0;
dql->slack_hold_time = hold_time;
dql_reset(dql);
return 0;
}
EXPORT_SYMBOL(dql_init);