q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/arch/arm/mach-orion/addr-map.c
Lennert Buytenhek 7f74c2c7f7 [ARM] Orion: distinguish between physical and virtual addresses 
Hack up the Orion port to distinguish between virtual and physical
addresses of register windows.  This will allow moving virtual
mappings higher up in the address space, to free up more kernel
virtual address space.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-02-08 11:52:23 -05:00

484 lines
13 KiB
C
Raw Blame History

/*
* arch/arm/mach-orion/addr-map.c
*
* Address map functions for Marvell Orion System On Chip
*
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include "common.h"
/*
* The Orion has fully programable address map. There's a separate address
* map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
* Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
* address decode windows that allow it to access any of the Orion resources.
*
* CPU address decoding --
* Linux assumes that it is the boot loader that already setup the access to
* DDR and internal registers.
* Setup access to PCI and PCI-E IO/MEM space is issued by core.c.
* Setup access to various devices located on the device bus interface (e.g.
* flashes, RTC, etc) should be issued by machine-setup.c according to
* specific board population (by using orion_setup_cpu_win()).
*
* Non-CPU Masters address decoding --
* Unlike the CPU, we setup the access from Orion's master interfaces to DDR
* banks only (the typical use case).
* Setup access for each master to DDR is issued by common.c.
*
* Note: although orion_setbits() and orion_clrbits() are not atomic
* no locking is necessary here since code in this file is only called
* at boot time when there is no concurrency issues.
*/
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DDR 0
#define TARGET_PCI 3
#define TARGET_PCIE 4
#define TARGET_DEV_BUS 1
#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
((n) == 1) ? 0xd : \
((n) == 2) ? 0xb : \
((n) == 3) ? 0x7 : 0xf)
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCI_MEM 0x59
#define ATTR_PCI_IO 0x51
#define ATTR_DEV_CS0 0x1e
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
#define WIN_EN 1
/*
* Helpers to get DDR banks info
*/
#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8))
#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8))
#define DDR_MAX_CS 4
#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
#define DDR_BANK_EN 1
/*
* CPU Address Decode Windows registers
*/
#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4))
#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4))
#define CPU_MAX_WIN 8
/*
* Use this CPU address decode windows allocation
*/
#define CPU_WIN_PCIE_IO 0
#define CPU_WIN_PCI_IO 1
#define CPU_WIN_PCIE_MEM 2
#define CPU_WIN_PCI_MEM 3
#define CPU_WIN_DEV_BOOT 4
#define CPU_WIN_DEV_CS0 5
#define CPU_WIN_DEV_CS1 6
#define CPU_WIN_DEV_CS2 7
/*
* PCIE Address Decode Windows registers
*/
#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8))
#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8))
#define PCIE_WIN_CTRL(n) ORION_PCIE_REG(0x1820 + ((n) << 4))
#define PCIE_WIN_BASE(n) ORION_PCIE_REG(0x1824 + ((n) << 4))
#define PCIE_WIN_REMAP(n) ORION_PCIE_REG(0x182c + ((n) << 4))
#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0)
#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0)
#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4)
#define PCIE_MAX_BARS 3
#define PCIE_MAX_WINS 5
/*
* Use PCIE BAR '1' for all DDR banks
*/
#define PCIE_DRAM_BAR 1
/*
* PCI Address Decode Windows registers
*/
#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \
((n) == 1) ? ORION_PCI_REG(0xd08) : \
((n) == 2) ? ORION_PCI_REG(0xc0c) : \
((n) == 3) ? ORION_PCI_REG(0xd0c) : 0)
#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \
((n) == 1) ? ORION_PCI_REG(0xd48) : \
((n) == 2) ? ORION_PCI_REG(0xc4c) : \
((n) == 3) ? ORION_PCI_REG(0xd4c) : 0)
#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c)
#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4))
#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4))
#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4))
#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c)
/*
* PCI configuration heleprs for BAR settings
*/
#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1)
#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10)
#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14)
/*
* Gigabit Ethernet Address Decode Windows registers
*/
#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8))
#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8))
#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4))
#define ETH_WIN_EN ORION_ETH_REG(0x290)
#define ETH_WIN_PROT ORION_ETH_REG(0x294)
#define ETH_MAX_WIN 6
#define ETH_MAX_REMAP_WIN 4
/*
* USB Address Decode Windows registers
*/
#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \
: ORION_USB1_REG(0x320 + ((w) << 4)))
#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \
: ORION_USB1_REG(0x324 + ((w) << 4)))
#define USB_MAX_WIN 4
/*
* SATA Address Decode Windows registers
*/
#define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10))
#define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10))
#define SATA_MAX_WIN 4
static int __init orion_cpu_win_can_remap(u32 win)
{
u32 dev, rev;
orion_pcie_id(&dev, &rev);
if ((dev == MV88F5281_DEV_ID && win < 4)
|| (dev == MV88F5182_DEV_ID && win < 2)
|| (dev == MV88F5181_DEV_ID && win < 2))
return 1;
return 0;
}
void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap)
{
u32 win, attr, ctrl;
switch (target) {
case ORION_PCIE_IO:
target = TARGET_PCIE;
attr = ATTR_PCIE_IO;
win = CPU_WIN_PCIE_IO;
break;
case ORION_PCI_IO:
target = TARGET_PCI;
attr = ATTR_PCI_IO;
win = CPU_WIN_PCI_IO;
break;
case ORION_PCIE_MEM:
target = TARGET_PCIE;
attr = ATTR_PCIE_MEM;
win = CPU_WIN_PCIE_MEM;
break;
case ORION_PCI_MEM:
target = TARGET_PCI;
attr = ATTR_PCI_MEM;
win = CPU_WIN_PCI_MEM;
break;
case ORION_DEV_BOOT:
target = TARGET_DEV_BUS;
attr = ATTR_DEV_BOOT;
win = CPU_WIN_DEV_BOOT;
break;
case ORION_DEV0:
target = TARGET_DEV_BUS;
attr = ATTR_DEV_CS0;
win = CPU_WIN_DEV_CS0;
break;
case ORION_DEV1:
target = TARGET_DEV_BUS;
attr = ATTR_DEV_CS1;
win = CPU_WIN_DEV_CS1;
break;
case ORION_DEV2:
target = TARGET_DEV_BUS;
attr = ATTR_DEV_CS2;
win = CPU_WIN_DEV_CS2;
break;
case ORION_DDR:
case ORION_REGS:
/*
* Must be mapped by bootloader.
*/
default:
target = attr = win = -1;
BUG();
}
base &= 0xffff0000;
ctrl = (((size - 1) & 0xffff0000) | (attr << 8) |
(target << 4) | WIN_EN);
orion_write(CPU_WIN_BASE(win), base);
orion_write(CPU_WIN_CTRL(win), ctrl);
if (orion_cpu_win_can_remap(win)) {
if (remap >= 0) {
orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
orion_write(CPU_WIN_REMAP_HI(win), 0);
} else {
orion_write(CPU_WIN_REMAP_LO(win), base);
orion_write(CPU_WIN_REMAP_HI(win), 0);
}
}
}
void __init orion_setup_cpu_wins(void)
{
int i;
/*
* First, disable and clear windows
*/
for (i = 0; i < CPU_MAX_WIN; i++) {
orion_write(CPU_WIN_BASE(i), 0);
orion_write(CPU_WIN_CTRL(i), 0);
if (orion_cpu_win_can_remap(i)) {
orion_write(CPU_WIN_REMAP_LO(i), 0);
orion_write(CPU_WIN_REMAP_HI(i), 0);
}
}
/*
* Setup windows for PCI+PCIe IO+MEM space.
*/
orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE,
ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE);
orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE,
ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE);
orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE,
ORION_PCIE_MEM_SIZE, -1);
orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE,
ORION_PCI_MEM_SIZE, -1);
}
/*
* Setup PCIE BARs and Address Decode Wins:
* BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
* WIN[0-3] -> DRAM bank[0-3]
*/
void __init orion_setup_pcie_wins(void)
{
u32 base, size, i;
/*
* First, disable and clear BARs and windows
*/
for (i = 1; i < PCIE_MAX_BARS; i++) {
orion_write(PCIE_BAR_CTRL(i), 0);
orion_write(PCIE_BAR_LO(i), 0);
orion_write(PCIE_BAR_HI(i), 0);
}
for (i = 0; i < PCIE_MAX_WINS; i++) {
orion_write(PCIE_WIN_CTRL(i), 0);
orion_write(PCIE_WIN_BASE(i), 0);
orion_write(PCIE_WIN_REMAP(i), 0);
}
/*
* Setup windows for DDR banks. Count total DDR size on the fly.
*/
base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0)));
size = 0;
for (i = 0; i < DDR_MAX_CS; i++) {
u32 bank_base, bank_size;
bank_size = orion_read(DDR_SIZE_CS(i));
bank_base = orion_read(DDR_BASE_CS(i));
if (bank_size & DDR_BANK_EN) {
bank_size = DDR_REG_TO_SIZE(bank_size);
bank_base = DDR_REG_TO_BASE(bank_base);
orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000);
orion_write(PCIE_WIN_REMAP(i), 0);
orion_write(PCIE_WIN_CTRL(i),
((bank_size-1) & 0xffff0000) |
(ATTR_DDR_CS(i) << 8) |
(TARGET_DDR << 4) |
(PCIE_DRAM_BAR << 1) | WIN_EN);
size += bank_size;
}
}
/*
* Setup BAR[1] to all DRAM banks
*/
orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000);
orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0);
orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR),
((size - 1) & 0xffff0000) | WIN_EN);
}
void __init orion_setup_pci_wins(void)
{
u32 base, size, i;
/*
* First, disable windows
*/
orion_write(PCI_BAR_ENABLE, 0xffffffff);
/*
* Setup windows for DDR banks.
*/
for (i = 0; i < DDR_MAX_CS; i++) {
base = orion_read(DDR_BASE_CS(i));
size = orion_read(DDR_SIZE_CS(i));
if (size & DDR_BANK_EN) {
u32 bus, dev, func, reg, val;
size = DDR_REG_TO_SIZE(size);
base = DDR_REG_TO_BASE(base);
bus = orion_pci_local_bus_nr();
dev = orion_pci_local_dev_nr();
func = PCI_CONF_FUNC_BAR_CS(i);
reg = PCI_CONF_REG_BAR_LO_CS(i);
orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val);
orion_pci_hw_wr_conf(bus, dev, func, reg, 4,
(base & 0xfffff000) | (val & 0xfff));
reg = PCI_CONF_REG_BAR_HI_CS(i);
orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0);
orion_write(PCI_BAR_SIZE_DDR_CS(i),
(size - 1) & 0xfffff000);
orion_write(PCI_BAR_REMAP_DDR_CS(i),
base & 0xfffff000);
orion_clrbits(PCI_BAR_ENABLE, (1 << i));
}
}
/*
* Disable automatic update of address remaping when writing to BARs
*/
orion_setbits(PCI_ADDR_DECODE_CTRL, 1);
}
void __init orion_setup_usb_wins(void)
{
int i;
u32 usb_if, dev, rev;
u32 max_usb_if = 1;
orion_pcie_id(&dev, &rev);
if (dev == MV88F5182_DEV_ID)
max_usb_if = 2;
for (usb_if = 0; usb_if < max_usb_if; usb_if++) {
/*
* First, disable and clear windows
*/
for (i = 0; i < USB_MAX_WIN; i++) {
orion_write(USB_WIN_BASE(usb_if, i), 0);
orion_write(USB_WIN_CTRL(usb_if, i), 0);
}
/*
* Setup windows for DDR banks.
*/
for (i = 0; i < DDR_MAX_CS; i++) {
u32 base, size;
size = orion_read(DDR_SIZE_CS(i));
base = orion_read(DDR_BASE_CS(i));
if (size & DDR_BANK_EN) {
base = DDR_REG_TO_BASE(base);
size = DDR_REG_TO_SIZE(size);
orion_write(USB_WIN_CTRL(usb_if, i),
((size-1) & 0xffff0000) |
(ATTR_DDR_CS(i) << 8) |
(TARGET_DDR << 4) | WIN_EN);
orion_write(USB_WIN_BASE(usb_if, i),
base & 0xffff0000);
}
}
}
}
void __init orion_setup_eth_wins(void)
{
int i;
/*
* First, disable and clear windows
*/
for (i = 0; i < ETH_MAX_WIN; i++) {
orion_write(ETH_WIN_BASE(i), 0);
orion_write(ETH_WIN_SIZE(i), 0);
orion_setbits(ETH_WIN_EN, 1 << i);
orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
if (i < ETH_MAX_REMAP_WIN)
orion_write(ETH_WIN_REMAP(i), 0);
}
/*
* Setup windows for DDR banks.
*/
for (i = 0; i < DDR_MAX_CS; i++) {
u32 base, size;
size = orion_read(DDR_SIZE_CS(i));
base = orion_read(DDR_BASE_CS(i));
if (size & DDR_BANK_EN) {
base = DDR_REG_TO_BASE(base);
size = DDR_REG_TO_SIZE(size);
orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
(ATTR_DDR_CS(i) << 8) |
TARGET_DDR);
orion_clrbits(ETH_WIN_EN, 1 << i);
orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
}
}
}
void __init orion_setup_sata_wins(void)
{
int i;
/*
* First, disable and clear windows
*/
for (i = 0; i < SATA_MAX_WIN; i++) {
orion_write(SATA_WIN_BASE(i), 0);
orion_write(SATA_WIN_CTRL(i), 0);
}
/*
* Setup windows for DDR banks.
*/
for (i = 0; i < DDR_MAX_CS; i++) {
u32 base, size;
size = orion_read(DDR_SIZE_CS(i));
base = orion_read(DDR_BASE_CS(i));
if (size & DDR_BANK_EN) {
base = DDR_REG_TO_BASE(base);
size = DDR_REG_TO_SIZE(size);
orion_write(SATA_WIN_CTRL(i),
((size-1) & 0xffff0000) |
(ATTR_DDR_CS(i) << 8) |
(TARGET_DDR << 4) | WIN_EN);
orion_write(SATA_WIN_BASE(i),
base & 0xffff0000);
}
}
}
Reference in a new issue View git blame Copy permalink