linux/arch/v850/kernel/v850e_intc.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

104 lines
3.3 KiB
C

/*
* arch/v850/kernel/v850e_intc.c -- V850E interrupt controller (INTC)
*
* Copyright (C) 2001,02,03 NEC Electronics Corporation
* Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
* Written by Miles Bader <miles@gnu.org>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/v850e_intc.h>
static void irq_nop (unsigned irq) { }
static unsigned v850e_intc_irq_startup (unsigned irq)
{
v850e_intc_clear_pending_irq (irq);
v850e_intc_enable_irq (irq);
return 0;
}
static void v850e_intc_end_irq (unsigned irq)
{
unsigned long psw, temp;
/* Clear the highest-level bit in the In-service priority register
(ISPR), to allow this interrupt (or another of the same or
lesser priority) to happen again.
The `reti' instruction normally does this automatically when the
PSW bits EP and NP are zero, but we can't always rely on reti
being used consistently to return after an interrupt (another
process can be scheduled, for instance, which can delay the
associated reti for a long time, or this process may be being
single-stepped, which uses the `dbret' instruction to return
from the kernel).
We also set the PSW EP bit, which prevents reti from also
trying to modify the ISPR itself. */
/* Get PSW and disable interrupts. */
asm volatile ("stsr psw, %0; di" : "=r" (psw));
/* We don't want to do anything for NMIs (they don't use the ISPR). */
if (! (psw & 0xC0)) {
/* Transition to `trap' state, so that an eventual real
reti instruction won't modify the ISPR. */
psw |= 0x40;
/* Fake an interrupt return, which automatically clears the
appropriate bit in the ISPR. */
asm volatile ("mov hilo(1f), %0;"
"ldsr %0, eipc; ldsr %1, eipsw;"
"reti;"
"1:"
: "=&r" (temp) : "r" (psw));
}
}
/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
INITS (which is terminated by an entry with the name field == 0). */
void __init v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
struct hw_interrupt_type *hw_irq_types)
{
struct v850e_intc_irq_init *init;
for (init = inits; init->name; init++) {
unsigned i;
struct hw_interrupt_type *hwit = hw_irq_types++;
hwit->typename = init->name;
hwit->startup = v850e_intc_irq_startup;
hwit->shutdown = v850e_intc_disable_irq;
hwit->enable = v850e_intc_enable_irq;
hwit->disable = v850e_intc_disable_irq;
hwit->ack = irq_nop;
hwit->end = v850e_intc_end_irq;
/* Initialize kernel IRQ infrastructure for this interrupt. */
init_irq_handlers(init->base, init->num, init->interval, hwit);
/* Set the interrupt priorities. */
for (i = 0; i < init->num; i++) {
unsigned irq = init->base + i * init->interval;
/* If the interrupt is currently enabled (all
interrupts are initially disabled), then
assume whoever enabled it has set things up
properly, and avoid messing with it. */
if (! v850e_intc_irq_enabled (irq))
/* This write also (1) disables the
interrupt, and (2) clears any pending
interrupts. */
V850E_INTC_IC (irq)
= (V850E_INTC_IC_PR (init->priority)
| V850E_INTC_IC_MK);
}
}
}