David Brownell 82c54f864f [AVR32] ngw100 i2c-gpio tweaks ... Make the NGW100 bitbang i2c use open drain signaling. Also, speed it up, so it's closer to 100 kHz ... the code paths seem to be long enough that the udelay isn't dominating bit times. The peak bit rate I observed was around 125 kHz, but that's with large delays (usually before ACK/NAK) which hold the overall rate down to around 80 kHz (call it 100 usec/byte on average). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>		2007-10-11 13:32:55 +02:00
..
boards	[AVR32] ngw100 i2c-gpio tweaks	2007-10-11 13:32:55 +02:00
boot	[PATCH] AVR32: Minor Makefile cleanup	2006-10-25 20:26:32 -07:00
configs	leds: leds-gpio for ngw100	2007-07-16 01:15:51 +01:00
kernel	[AVR32] Remove unneeded 8K alignment of .text section	2007-10-11 12:16:57 +02:00
lib	[AVR32] Remove last remains of libgcc	2007-02-09 15:01:59 +01:00
mach-at32ap	[AVR32] SMC configuration in clock cycles	2007-10-11 13:32:49 +02:00
mm	[AVR32] Drop support for redundant "keepinitrd" boot-time parm.	2007-10-11 12:16:57 +02:00
Kconfig	[AVR32] Make STK1000 mux settings configurable	2007-07-18 20:45:51 +02:00
Kconfig.debug	[PATCH] avr32 architecture	2006-09-26 08:48:54 -07:00
Makefile	[AVR32] Use correct config symbol when setting cpuflags	2007-05-09 08:48:38 +02:00