5a0e3ad6af
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
227 lines
5.5 KiB
C
227 lines
5.5 KiB
C
/*
|
|
* A low-level PATA driver to handle a Compact Flash connected on the
|
|
* Mikrotik's RouterBoard 532 board.
|
|
*
|
|
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
|
|
* Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
|
|
*
|
|
* This file was based on: drivers/ata/pata_ixp4xx_cf.c
|
|
* Copyright (C) 2006-07 Tower Technologies
|
|
* Author: Alessandro Zummo <a.zummo@towertech.it>
|
|
*
|
|
* Also was based on the driver for Linux 2.4.xx published by Mikrotik for
|
|
* their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
|
|
* seems not to have a license.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/gfp.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/libata.h>
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <asm/gpio.h>
|
|
|
|
#define DRV_NAME "pata-rb532-cf"
|
|
#define DRV_VERSION "0.1.0"
|
|
#define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash"
|
|
|
|
#define RB500_CF_MAXPORTS 1
|
|
#define RB500_CF_IO_DELAY 400
|
|
|
|
#define RB500_CF_REG_BASE 0x0800
|
|
#define RB500_CF_REG_ERR 0x080D
|
|
#define RB500_CF_REG_CTRL 0x080E
|
|
/* 32bit buffered data register offset */
|
|
#define RB500_CF_REG_DBUF32 0x0C00
|
|
|
|
struct rb532_cf_info {
|
|
void __iomem *iobase;
|
|
unsigned int gpio_line;
|
|
unsigned int irq;
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *ah = dev_instance;
|
|
struct rb532_cf_info *info = ah->private_data;
|
|
|
|
if (gpio_get_value(info->gpio_line)) {
|
|
set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
|
|
ata_sff_interrupt(info->irq, dev_instance);
|
|
} else {
|
|
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct ata_port_operations rb532_pata_port_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
.sff_data_xfer = ata_sff_data_xfer32,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
static struct scsi_host_template rb532_pata_sht = {
|
|
ATA_PIO_SHT(DRV_NAME),
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
static void rb532_pata_setup_ports(struct ata_host *ah)
|
|
{
|
|
struct rb532_cf_info *info = ah->private_data;
|
|
struct ata_port *ap;
|
|
|
|
ap = ah->ports[0];
|
|
|
|
ap->ops = &rb532_pata_port_ops;
|
|
ap->pio_mask = ATA_PIO4;
|
|
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
|
|
|
|
ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
|
|
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
|
|
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
|
|
|
|
ata_sff_std_ports(&ap->ioaddr);
|
|
|
|
ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
|
|
ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
|
|
}
|
|
|
|
static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
|
|
{
|
|
int irq;
|
|
int gpio;
|
|
struct resource *res;
|
|
struct ata_host *ah;
|
|
struct rb532_cf_info *info;
|
|
int ret;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "no IOMEM resource found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(&pdev->dev, "no IRQ resource found\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
gpio = irq_to_gpio(irq);
|
|
if (gpio < 0) {
|
|
dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
|
|
return -ENOENT;
|
|
}
|
|
|
|
ret = gpio_request(gpio, DRV_NAME);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "GPIO request failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/* allocate host */
|
|
ah = ata_host_alloc(&pdev->dev, RB500_CF_MAXPORTS);
|
|
if (!ah)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, ah);
|
|
|
|
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
ah->private_data = info;
|
|
info->gpio_line = gpio;
|
|
info->irq = irq;
|
|
|
|
info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (!info->iobase)
|
|
return -ENOMEM;
|
|
|
|
ret = gpio_direction_input(gpio);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
|
|
ret);
|
|
goto err_free_gpio;
|
|
}
|
|
|
|
rb532_pata_setup_ports(ah);
|
|
|
|
ret = ata_host_activate(ah, irq, rb532_pata_irq_handler,
|
|
IRQF_TRIGGER_LOW, &rb532_pata_sht);
|
|
if (ret)
|
|
goto err_free_gpio;
|
|
|
|
return 0;
|
|
|
|
err_free_gpio:
|
|
gpio_free(gpio);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int rb532_pata_driver_remove(struct platform_device *pdev)
|
|
{
|
|
struct ata_host *ah = platform_get_drvdata(pdev);
|
|
struct rb532_cf_info *info = ah->private_data;
|
|
|
|
ata_host_detach(ah);
|
|
gpio_free(info->gpio_line);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|
|
|
|
static struct platform_driver rb532_pata_platform_driver = {
|
|
.probe = rb532_pata_driver_probe,
|
|
.remove = __devexit_p(rb532_pata_driver_remove),
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
#define DRV_INFO DRV_DESC " version " DRV_VERSION
|
|
|
|
static int __init rb532_pata_module_init(void)
|
|
{
|
|
printk(KERN_INFO DRV_INFO "\n");
|
|
|
|
return platform_driver_register(&rb532_pata_platform_driver);
|
|
}
|
|
|
|
static void __exit rb532_pata_module_exit(void)
|
|
{
|
|
platform_driver_unregister(&rb532_pata_platform_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
|
|
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
|
|
MODULE_DESCRIPTION(DRV_DESC);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(rb532_pata_module_init);
|
|
module_exit(rb532_pata_module_exit);
|