q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/usb/gadget/langwell_udc.c
Alexey Dobriyan 405f55712d headers: smp_lock.h redux 
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00

3372 lines
80 KiB
C
Raw Blame History

/*
* Intel Langwell USB Device Controller driver
* Copyright (C) 2008-2009, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
/* #undef DEBUG */
/* #undef VERBOSE */
#if defined(CONFIG_USB_LANGWELL_OTG)
#define OTG_TRANSCEIVER
#endif
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/pm.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
#include "langwell_udc.h"
#define DRIVER_DESC "Intel Langwell USB Device Controller driver"
#define DRIVER_VERSION "16 May 2009"
static const char driver_name[] = "langwell_udc";
static const char driver_desc[] = DRIVER_DESC;
/* controller device global variable */
static struct langwell_udc *the_controller;
/* for endpoint 0 operations */
static const struct usb_endpoint_descriptor
langwell_ep0_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0,
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
.wMaxPacketSize = EP0_MAX_PKT_SIZE,
};
/*-------------------------------------------------------------------------*/
/* debugging */
#ifdef DEBUG
#define DBG(dev, fmt, args...) \
pr_debug("%s %s: " fmt , driver_name, \
pci_name(dev->pdev), ## args)
#else
#define DBG(dev, fmt, args...) \
do { } while (0)
#endif /* DEBUG */
#ifdef VERBOSE
#define VDBG DBG
#else
#define VDBG(dev, fmt, args...) \
do { } while (0)
#endif /* VERBOSE */
#define ERROR(dev, fmt, args...) \
pr_err("%s %s: " fmt , driver_name, \
pci_name(dev->pdev), ## args)
#define WARNING(dev, fmt, args...) \
pr_warning("%s %s: " fmt , driver_name, \
pci_name(dev->pdev), ## args)
#define INFO(dev, fmt, args...) \
pr_info("%s %s: " fmt , driver_name, \
pci_name(dev->pdev), ## args)
#ifdef VERBOSE
static inline void print_all_registers(struct langwell_udc *dev)
{
int i;
/* Capability Registers */
printk(KERN_DEBUG "Capability Registers (offset: "
"0x%04x, length: 0x%08x)\n",
CAP_REG_OFFSET,
(u32)sizeof(struct langwell_cap_regs));
printk(KERN_DEBUG "caplength=0x%02x\n",
readb(&dev->cap_regs->caplength));
printk(KERN_DEBUG "hciversion=0x%04x\n",
readw(&dev->cap_regs->hciversion));
printk(KERN_DEBUG "hcsparams=0x%08x\n",
readl(&dev->cap_regs->hcsparams));
printk(KERN_DEBUG "hccparams=0x%08x\n",
readl(&dev->cap_regs->hccparams));
printk(KERN_DEBUG "dciversion=0x%04x\n",
readw(&dev->cap_regs->dciversion));
printk(KERN_DEBUG "dccparams=0x%08x\n",
readl(&dev->cap_regs->dccparams));
/* Operational Registers */
printk(KERN_DEBUG "Operational Registers (offset: "
"0x%04x, length: 0x%08x)\n",
OP_REG_OFFSET,
(u32)sizeof(struct langwell_op_regs));
printk(KERN_DEBUG "extsts=0x%08x\n",
readl(&dev->op_regs->extsts));
printk(KERN_DEBUG "extintr=0x%08x\n",
readl(&dev->op_regs->extintr));
printk(KERN_DEBUG "usbcmd=0x%08x\n",
readl(&dev->op_regs->usbcmd));
printk(KERN_DEBUG "usbsts=0x%08x\n",
readl(&dev->op_regs->usbsts));
printk(KERN_DEBUG "usbintr=0x%08x\n",
readl(&dev->op_regs->usbintr));
printk(KERN_DEBUG "frindex=0x%08x\n",
readl(&dev->op_regs->frindex));
printk(KERN_DEBUG "ctrldssegment=0x%08x\n",
readl(&dev->op_regs->ctrldssegment));
printk(KERN_DEBUG "deviceaddr=0x%08x\n",
readl(&dev->op_regs->deviceaddr));
printk(KERN_DEBUG "endpointlistaddr=0x%08x\n",
readl(&dev->op_regs->endpointlistaddr));
printk(KERN_DEBUG "ttctrl=0x%08x\n",
readl(&dev->op_regs->ttctrl));
printk(KERN_DEBUG "burstsize=0x%08x\n",
readl(&dev->op_regs->burstsize));
printk(KERN_DEBUG "txfilltuning=0x%08x\n",
readl(&dev->op_regs->txfilltuning));
printk(KERN_DEBUG "txttfilltuning=0x%08x\n",
readl(&dev->op_regs->txttfilltuning));
printk(KERN_DEBUG "ic_usb=0x%08x\n",
readl(&dev->op_regs->ic_usb));
printk(KERN_DEBUG "ulpi_viewport=0x%08x\n",
readl(&dev->op_regs->ulpi_viewport));
printk(KERN_DEBUG "configflag=0x%08x\n",
readl(&dev->op_regs->configflag));
printk(KERN_DEBUG "portsc1=0x%08x\n",
readl(&dev->op_regs->portsc1));
printk(KERN_DEBUG "devlc=0x%08x\n",
readl(&dev->op_regs->devlc));
printk(KERN_DEBUG "otgsc=0x%08x\n",
readl(&dev->op_regs->otgsc));
printk(KERN_DEBUG "usbmode=0x%08x\n",
readl(&dev->op_regs->usbmode));
printk(KERN_DEBUG "endptnak=0x%08x\n",
readl(&dev->op_regs->endptnak));
printk(KERN_DEBUG "endptnaken=0x%08x\n",
readl(&dev->op_regs->endptnaken));
printk(KERN_DEBUG "endptsetupstat=0x%08x\n",
readl(&dev->op_regs->endptsetupstat));
printk(KERN_DEBUG "endptprime=0x%08x\n",
readl(&dev->op_regs->endptprime));
printk(KERN_DEBUG "endptflush=0x%08x\n",
readl(&dev->op_regs->endptflush));
printk(KERN_DEBUG "endptstat=0x%08x\n",
readl(&dev->op_regs->endptstat));
printk(KERN_DEBUG "endptcomplete=0x%08x\n",
readl(&dev->op_regs->endptcomplete));
for (i = 0; i < dev->ep_max / 2; i++) {
printk(KERN_DEBUG "endptctrl[%d]=0x%08x\n",
i, readl(&dev->op_regs->endptctrl[i]));
}
}
#endif /* VERBOSE */
/*-------------------------------------------------------------------------*/
#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out")
#define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
USB_DIR_IN) : ((ep)->desc->bEndpointAddress \
& USB_DIR_IN) == USB_DIR_IN)
#ifdef DEBUG
static char *type_string(u8 bmAttributes)
{
switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_BULK:
return "bulk";
case USB_ENDPOINT_XFER_ISOC:
return "iso";
case USB_ENDPOINT_XFER_INT:
return "int";
};
return "control";
}
#endif
/* configure endpoint control registers */
static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
unsigned char is_in, unsigned char ep_type)
{
struct langwell_udc *dev;
u32 endptctrl;
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
if (is_in) { /* TX */
if (ep_num)
endptctrl |= EPCTRL_TXR;
endptctrl |= EPCTRL_TXE;
endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
} else { /* RX */
if (ep_num)
endptctrl |= EPCTRL_RXR;
endptctrl |= EPCTRL_RXE;
endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
}
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
VDBG(dev, "<--- %s()\n", __func__);
}
/* reset ep0 dQH and endptctrl */
static void ep0_reset(struct langwell_udc *dev)
{
struct langwell_ep *ep;
int i;
VDBG(dev, "---> %s()\n", __func__);
/* ep0 in and out */
for (i = 0; i < 2; i++) {
ep = &dev->ep[i];
ep->dev = dev;
/* ep0 dQH */
ep->dqh = &dev->ep_dqh[i];
/* configure ep0 endpoint capabilities in dQH */
ep->dqh->dqh_ios = 1;
ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
/* FIXME: enable ep0-in HW zero length termination select */
if (is_in(ep))
ep->dqh->dqh_zlt = 0;
ep->dqh->dqh_mult = 0;
/* configure ep0 control registers */
ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
}
VDBG(dev, "<--- %s()\n", __func__);
return;
}
/*-------------------------------------------------------------------------*/
/* endpoints operations */
/* configure endpoint, making it usable */
static int langwell_ep_enable(struct usb_ep *_ep,
const struct usb_endpoint_descriptor *desc)
{
struct langwell_udc *dev;
struct langwell_ep *ep;
u16 max = 0;
unsigned long flags;
int retval = 0;
unsigned char zlt, ios = 0, mult = 0;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
if (!_ep || !desc || ep->desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
max = le16_to_cpu(desc->wMaxPacketSize);
/*
* disable HW zero length termination select
* driver handles zero length packet through req->req.zero
*/
zlt = 1;
/*
* sanity check type, direction, address, and then
* initialize the endpoint capabilities fields in dQH
*/
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_CONTROL:
ios = 1;
break;
case USB_ENDPOINT_XFER_BULK:
if ((dev->gadget.speed == USB_SPEED_HIGH
&& max != 512)
|| (dev->gadget.speed == USB_SPEED_FULL
&& max > 64)) {
goto done;
}
break;
case USB_ENDPOINT_XFER_INT:
if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
goto done;
switch (dev->gadget.speed) {
case USB_SPEED_HIGH:
if (max <= 1024)
break;
case USB_SPEED_FULL:
if (max <= 64)
break;
default:
if (max <= 8)
break;
goto done;
}
break;
case USB_ENDPOINT_XFER_ISOC:
if (strstr(ep->ep.name, "-bulk")
|| strstr(ep->ep.name, "-int"))
goto done;
switch (dev->gadget.speed) {
case USB_SPEED_HIGH:
if (max <= 1024)
break;
case USB_SPEED_FULL:
if (max <= 1023)
break;
default:
goto done;
}
/*
* FIXME:
* calculate transactions needed for high bandwidth iso
*/
mult = (unsigned char)(1 + ((max >> 11) & 0x03));
max = max & 0x8ff; /* bit 0~10 */
/* 3 transactions at most */
if (mult > 3)
goto done;
break;
default:
goto done;
}
spin_lock_irqsave(&dev->lock, flags);
/* configure endpoint capabilities in dQH */
ep->dqh->dqh_ios = ios;
ep->dqh->dqh_mpl = cpu_to_le16(max);
ep->dqh->dqh_zlt = zlt;
ep->dqh->dqh_mult = mult;
ep->ep.maxpacket = max;
ep->desc = desc;
ep->stopped = 0;
ep->ep_num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
/* ep_type */
ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
/* configure endpoint control registers */
ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
DBG(dev, "enabled %s (ep%d%s-%s), max %04x\n",
_ep->name,
ep->ep_num,
DIR_STRING(desc->bEndpointAddress),
type_string(desc->bmAttributes),
max);
spin_unlock_irqrestore(&dev->lock, flags);
done:
VDBG(dev, "<--- %s()\n", __func__);
return retval;
}
/*-------------------------------------------------------------------------*/
/* retire a request */
static void done(struct langwell_ep *ep, struct langwell_request *req,
int status)
{
struct langwell_udc *dev = ep->dev;
unsigned stopped = ep->stopped;
struct langwell_dtd *curr_dtd, *next_dtd;
int i;
VDBG(dev, "---> %s()\n", __func__);
/* remove the req from ep->queue */
list_del_init(&req->queue);
if (req->req.status == -EINPROGRESS)
req->req.status = status;
else
status = req->req.status;
/* free dTD for the request */
next_dtd = req->head;
for (i = 0; i < req->dtd_count; i++) {
curr_dtd = next_dtd;
if (i != req->dtd_count - 1)
next_dtd = curr_dtd->next_dtd_virt;
dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
}
if (req->mapped) {
dma_unmap_single(&dev->pdev->dev, req->req.dma, req->req.length,
is_in(ep) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
req->req.dma = DMA_ADDR_INVALID;
req->mapped = 0;
} else
dma_sync_single_for_cpu(&dev->pdev->dev, req->req.dma,
req->req.length,
is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
if (status != -ESHUTDOWN)
DBG(dev, "complete %s, req %p, stat %d, len %u/%u\n",
ep->ep.name, &req->req, status,
req->req.actual, req->req.length);
/* don't modify queue heads during completion callback */
ep->stopped = 1;
spin_unlock(&dev->lock);
/* complete routine from gadget driver */
if (req->req.complete)
req->req.complete(&ep->ep, &req->req);
spin_lock(&dev->lock);
ep->stopped = stopped;
VDBG(dev, "<--- %s()\n", __func__);
}
static void langwell_ep_fifo_flush(struct usb_ep *_ep);
/* delete all endpoint requests, called with spinlock held */
static void nuke(struct langwell_ep *ep, int status)
{
/* called with spinlock held */
ep->stopped = 1;
/* endpoint fifo flush */
if (&ep->ep && ep->desc)
langwell_ep_fifo_flush(&ep->ep);
while (!list_empty(&ep->queue)) {
struct langwell_request *req = NULL;
req = list_entry(ep->queue.next, struct langwell_request,
queue);
done(ep, req, status);
}
}
/*-------------------------------------------------------------------------*/
/* endpoint is no longer usable */
static int langwell_ep_disable(struct usb_ep *_ep)
{
struct langwell_ep *ep;
unsigned long flags;
struct langwell_udc *dev;
int ep_num;
u32 endptctrl;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
if (!_ep || !ep->desc)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
/* disable endpoint control register */
ep_num = ep->ep_num;
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
if (is_in(ep))
endptctrl &= ~EPCTRL_TXE;
else
endptctrl &= ~EPCTRL_RXE;
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
/* nuke all pending requests (does flush) */
nuke(ep, -ESHUTDOWN);
ep->desc = NULL;
ep->stopped = 1;
spin_unlock_irqrestore(&dev->lock, flags);
DBG(dev, "disabled %s\n", _ep->name);
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* allocate a request object to use with this endpoint */
static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
gfp_t gfp_flags)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
struct langwell_request *req = NULL;
if (!_ep)
return NULL;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return NULL;
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD(&req->queue);
VDBG(dev, "alloc request for %s\n", _ep->name);
VDBG(dev, "<--- %s()\n", __func__);
return &req->req;
}
/* free a request object */
static void langwell_free_request(struct usb_ep *_ep,
struct usb_request *_req)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
struct langwell_request *req = NULL;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
if (!_ep || !_req)
return;
req = container_of(_req, struct langwell_request, req);
WARN_ON(!list_empty(&req->queue));
if (_req)
kfree(req);
VDBG(dev, "free request for %s\n", _ep->name);
VDBG(dev, "<--- %s()\n", __func__);
}
/*-------------------------------------------------------------------------*/
/* queue dTD and PRIME endpoint */
static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
{
u32 bit_mask, usbcmd, endptstat, dtd_dma;
u8 dtd_status;
int i;
struct langwell_dqh *dqh;
struct langwell_udc *dev;
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
i = ep->ep_num * 2 + is_in(ep);
dqh = &dev->ep_dqh[i];
if (ep->ep_num)
VDBG(dev, "%s\n", ep->name);
else
/* ep0 */
VDBG(dev, "%s-%s\n", ep->name, is_in(ep) ? "in" : "out");
VDBG(dev, "ep_dqh[%d] addr: 0x%08x\n", i, (u32)&(dev->ep_dqh[i]));
bit_mask = is_in(ep) ?
(1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
VDBG(dev, "bit_mask = 0x%08x\n", bit_mask);
/* check if the pipe is empty */
if (!(list_empty(&ep->queue))) {
/* add dTD to the end of linked list */
struct langwell_request *lastreq;
lastreq = list_entry(ep->queue.prev,
struct langwell_request, queue);
lastreq->tail->dtd_next =
cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
/* read prime bit, if 1 goto out */
if (readl(&dev->op_regs->endptprime) & bit_mask)
goto out;
do {
/* set ATDTW bit in USBCMD */
usbcmd = readl(&dev->op_regs->usbcmd);
writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
/* read correct status bit */
endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
} while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
/* write ATDTW bit to 0 */
usbcmd = readl(&dev->op_regs->usbcmd);
writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
if (endptstat)
goto out;
}
/* write dQH next pointer and terminate bit to 0 */
dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
dqh->dtd_next = cpu_to_le32(dtd_dma);
/* clear active and halt bit */
dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
dqh->dtd_status &= dtd_status;
VDBG(dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
/* write 1 to endptprime register to PRIME endpoint */
bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
VDBG(dev, "endprime bit_mask = 0x%08x\n", bit_mask);
writel(bit_mask, &dev->op_regs->endptprime);
out:
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* fill in the dTD structure to build a transfer descriptor */
static struct langwell_dtd *build_dtd(struct langwell_request *req,
unsigned *length, dma_addr_t *dma, int *is_last)
{
u32 buf_ptr;
struct langwell_dtd *dtd;
struct langwell_udc *dev;
int i;
dev = req->ep->dev;
VDBG(dev, "---> %s()\n", __func__);
/* the maximum transfer length, up to 16k bytes */
*length = min(req->req.length - req->req.actual,
(unsigned)DTD_MAX_TRANSFER_LENGTH);
/* create dTD dma_pool resource */
dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
if (dtd == NULL)
return dtd;
dtd->dtd_dma = *dma;
/* initialize buffer page pointers */
buf_ptr = (u32)(req->req.dma + req->req.actual);
for (i = 0; i < 5; i++)
dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
req->req.actual += *length;
/* fill in total bytes with transfer size */
dtd->dtd_total = cpu_to_le16(*length);
VDBG(dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
/* set is_last flag if req->req.zero is set or not */
if (req->req.zero) {
if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
*is_last = 1;
else
*is_last = 0;
} else if (req->req.length == req->req.actual) {
*is_last = 1;
} else
*is_last = 0;
if (*is_last == 0)
VDBG(dev, "multi-dtd request!\n");
/* set interrupt on complete bit for the last dTD */
if (*is_last && !req->req.no_interrupt)
dtd->dtd_ioc = 1;
/* set multiplier override 0 for non-ISO and non-TX endpoint */
dtd->dtd_multo = 0;
/* set the active bit of status field to 1 */
dtd->dtd_status = DTD_STS_ACTIVE;
VDBG(dev, "dtd->dtd_status = 0x%02x\n", dtd->dtd_status);
VDBG(dev, "length = %d, dma addr= 0x%08x\n", *length, (int)*dma);
VDBG(dev, "<--- %s()\n", __func__);
return dtd;
}
/* generate dTD linked list for a request */
static int req_to_dtd(struct langwell_request *req)
{
unsigned count;
int is_last, is_first = 1;
struct langwell_dtd *dtd, *last_dtd = NULL;
struct langwell_udc *dev;
dma_addr_t dma;
dev = req->ep->dev;
VDBG(dev, "---> %s()\n", __func__);
do {
dtd = build_dtd(req, &count, &dma, &is_last);
if (dtd == NULL)
return -ENOMEM;
if (is_first) {
is_first = 0;
req->head = dtd;
} else {
last_dtd->dtd_next = cpu_to_le32(dma);
last_dtd->next_dtd_virt = dtd;
}
last_dtd = dtd;
req->dtd_count++;
} while (!is_last);
/* set terminate bit to 1 for the last dTD */
dtd->dtd_next = DTD_TERM;
req->tail = dtd;
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/*-------------------------------------------------------------------------*/
/* queue (submits) an I/O requests to an endpoint */
static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
gfp_t gfp_flags)
{
struct langwell_request *req;
struct langwell_ep *ep;
struct langwell_udc *dev;
unsigned long flags;
int is_iso = 0, zlflag = 0;
/* always require a cpu-view buffer */
req = container_of(_req, struct langwell_request, req);
ep = container_of(_ep, struct langwell_ep, ep);
if (!_req || !_req->complete || !_req->buf
|| !list_empty(&req->queue)) {
return -EINVAL;
}
if (unlikely(!_ep || !ep->desc))
return -EINVAL;
dev = ep->dev;
req->ep = ep;
VDBG(dev, "---> %s()\n", __func__);
if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
if (req->req.length > ep->ep.maxpacket)
return -EMSGSIZE;
is_iso = 1;
}
if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
return -ESHUTDOWN;
/* set up dma mapping in case the caller didn't */
if (_req->dma == DMA_ADDR_INVALID) {
/* WORKAROUND: WARN_ON(size == 0) */
if (_req->length == 0) {
VDBG(dev, "req->length: 0->1\n");
zlflag = 1;
_req->length++;
}
_req->dma = dma_map_single(&dev->pdev->dev,
_req->buf, _req->length,
is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
if (zlflag && (_req->length == 1)) {
VDBG(dev, "req->length: 1->0\n");
zlflag = 0;
_req->length = 0;
}
req->mapped = 1;
VDBG(dev, "req->mapped = 1\n");
} else {
dma_sync_single_for_device(&dev->pdev->dev,
_req->dma, _req->length,
is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
req->mapped = 0;
VDBG(dev, "req->mapped = 0\n");
}
DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
_ep->name,
_req, _req->length, _req->buf, _req->dma);
_req->status = -EINPROGRESS;
_req->actual = 0;
req->dtd_count = 0;
spin_lock_irqsave(&dev->lock, flags);
/* build and put dTDs to endpoint queue */
if (!req_to_dtd(req)) {
queue_dtd(ep, req);
} else {
spin_unlock_irqrestore(&dev->lock, flags);
return -ENOMEM;
}
/* update ep0 state */
if (ep->ep_num == 0)
dev->ep0_state = DATA_STATE_XMIT;
if (likely(req != NULL)) {
list_add_tail(&req->queue, &ep->queue);
VDBG(dev, "list_add_tail() \n");
}
spin_unlock_irqrestore(&dev->lock, flags);
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* dequeue (cancels, unlinks) an I/O request from an endpoint */
static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
struct langwell_request *req;
unsigned long flags;
int stopped, ep_num, retval = 0;
u32 endptctrl;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
if (!_ep || !ep->desc || !_req)
return -EINVAL;
if (!dev->driver)
return -ESHUTDOWN;
spin_lock_irqsave(&dev->lock, flags);
stopped = ep->stopped;
/* quiesce dma while we patch the queue */
ep->stopped = 1;
ep_num = ep->ep_num;
/* disable endpoint control register */
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
if (is_in(ep))
endptctrl &= ~EPCTRL_TXE;
else
endptctrl &= ~EPCTRL_RXE;
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
/* make sure it's still queued on this endpoint */
list_for_each_entry(req, &ep->queue, queue) {
if (&req->req == _req)
break;
}
if (&req->req != _req) {
retval = -EINVAL;
goto done;
}
/* queue head may be partially complete. */
if (ep->queue.next == &req->queue) {
DBG(dev, "unlink (%s) dma\n", _ep->name);
_req->status = -ECONNRESET;
langwell_ep_fifo_flush(&ep->ep);
/* not the last request in endpoint queue */
if (likely(ep->queue.next == &req->queue)) {
struct langwell_dqh *dqh;
struct langwell_request *next_req;
dqh = ep->dqh;
next_req = list_entry(req->queue.next,
struct langwell_request, queue);
/* point the dQH to the first dTD of next request */
writel((u32) next_req->head, &dqh->dqh_current);
}
} else {
struct langwell_request *prev_req;
prev_req = list_entry(req->queue.prev,
struct langwell_request, queue);
writel(readl(&req->tail->dtd_next),
&prev_req->tail->dtd_next);
}
done(ep, req, -ECONNRESET);
done:
/* enable endpoint again */
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
if (is_in(ep))
endptctrl |= EPCTRL_TXE;
else
endptctrl |= EPCTRL_RXE;
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
ep->stopped = stopped;
spin_unlock_irqrestore(&dev->lock, flags);
VDBG(dev, "<--- %s()\n", __func__);
return retval;
}
/*-------------------------------------------------------------------------*/
/* endpoint set/clear halt */
static void ep_set_halt(struct langwell_ep *ep, int value)
{
u32 endptctrl = 0;
int ep_num;
struct langwell_udc *dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
ep_num = ep->ep_num;
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
/* value: 1 - set halt, 0 - clear halt */
if (value) {
/* set the stall bit */
if (is_in(ep))
endptctrl |= EPCTRL_TXS;
else
endptctrl |= EPCTRL_RXS;
} else {
/* clear the stall bit and reset data toggle */
if (is_in(ep)) {
endptctrl &= ~EPCTRL_TXS;
endptctrl |= EPCTRL_TXR;
} else {
endptctrl &= ~EPCTRL_RXS;
endptctrl |= EPCTRL_RXR;
}
}
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
VDBG(dev, "<--- %s()\n", __func__);
}
/* set the endpoint halt feature */
static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
unsigned long flags;
int retval = 0;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
if (!_ep || !ep->desc)
return -EINVAL;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
if (ep->desc && (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_ISOC)
return -EOPNOTSUPP;
spin_lock_irqsave(&dev->lock, flags);
/*
* attempt to halt IN ep will fail if any transfer requests
* are still queue
*/
if (!list_empty(&ep->queue) && is_in(ep) && value) {
/* IN endpoint FIFO holds bytes */
DBG(dev, "%s FIFO holds bytes\n", _ep->name);
retval = -EAGAIN;
goto done;
}
/* endpoint set/clear halt */
if (ep->ep_num) {
ep_set_halt(ep, value);
} else { /* endpoint 0 */
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
}
done:
spin_unlock_irqrestore(&dev->lock, flags);
DBG(dev, "%s %s halt\n", _ep->name, value ? "set" : "clear");
VDBG(dev, "<--- %s()\n", __func__);
return retval;
}
/* set the halt feature and ignores clear requests */
static int langwell_ep_set_wedge(struct usb_ep *_ep)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
if (!_ep || !ep->desc)
return -EINVAL;
VDBG(dev, "<--- %s()\n", __func__);
return usb_ep_set_halt(_ep);
}
/* flush contents of a fifo */
static void langwell_ep_fifo_flush(struct usb_ep *_ep)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
u32 flush_bit;
unsigned long timeout;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
VDBG(dev, "---> %s()\n", __func__);
if (!_ep || !ep->desc) {
VDBG(dev, "ep or ep->desc is NULL\n");
VDBG(dev, "<--- %s()\n", __func__);
return;
}
VDBG(dev, "%s-%s fifo flush\n", _ep->name, is_in(ep) ? "in" : "out");
/* flush endpoint buffer */
if (ep->ep_num == 0)
flush_bit = (1 << 16) | 1;
else if (is_in(ep))
flush_bit = 1 << (ep->ep_num + 16); /* TX */
else
flush_bit = 1 << ep->ep_num; /* RX */
/* wait until flush complete */
timeout = jiffies + FLUSH_TIMEOUT;
do {
writel(flush_bit, &dev->op_regs->endptflush);
while (readl(&dev->op_regs->endptflush)) {
if (time_after(jiffies, timeout)) {
ERROR(dev, "ep flush timeout\n");
goto done;
}
cpu_relax();
}
} while (readl(&dev->op_regs->endptstat) & flush_bit);
done:
VDBG(dev, "<--- %s()\n", __func__);
}
/* endpoints operations structure */
static const struct usb_ep_ops langwell_ep_ops = {
/* configure endpoint, making it usable */
.enable = langwell_ep_enable,
/* endpoint is no longer usable */
.disable = langwell_ep_disable,
/* allocate a request object to use with this endpoint */
.alloc_request = langwell_alloc_request,
/* free a request object */
.free_request = langwell_free_request,
/* queue (submits) an I/O requests to an endpoint */
.queue = langwell_ep_queue,
/* dequeue (cancels, unlinks) an I/O request from an endpoint */
.dequeue = langwell_ep_dequeue,
/* set the endpoint halt feature */
.set_halt = langwell_ep_set_halt,
/* set the halt feature and ignores clear requests */
.set_wedge = langwell_ep_set_wedge,
/* flush contents of a fifo */
.fifo_flush = langwell_ep_fifo_flush,
};
/*-------------------------------------------------------------------------*/
/* device controller usb_gadget_ops structure */
/* returns the current frame number */
static int langwell_get_frame(struct usb_gadget *_gadget)
{
struct langwell_udc *dev;
u16 retval;
if (!_gadget)
return -ENODEV;
dev = container_of(_gadget, struct langwell_udc, gadget);
VDBG(dev, "---> %s()\n", __func__);
retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
VDBG(dev, "<--- %s()\n", __func__);
return retval;
}
/* tries to wake up the host connected to this gadget */
static int langwell_wakeup(struct usb_gadget *_gadget)
{
struct langwell_udc *dev;
u32 portsc1, devlc;
unsigned long flags;
if (!_gadget)
return 0;
dev = container_of(_gadget, struct langwell_udc, gadget);
VDBG(dev, "---> %s()\n", __func__);
/* Remote Wakeup feature not enabled by host */
if (!dev->remote_wakeup)
return -ENOTSUPP;
spin_lock_irqsave(&dev->lock, flags);
portsc1 = readl(&dev->op_regs->portsc1);
if (!(portsc1 & PORTS_SUSP)) {
spin_unlock_irqrestore(&dev->lock, flags);
return 0;
}
/* LPM L1 to L0, remote wakeup */
if (dev->lpm && dev->lpm_state == LPM_L1) {
portsc1 |= PORTS_SLP;
writel(portsc1, &dev->op_regs->portsc1);
}
/* force port resume */
if (dev->usb_state == USB_STATE_SUSPENDED) {
portsc1 |= PORTS_FPR;
writel(portsc1, &dev->op_regs->portsc1);
}
/* exit PHY low power suspend */
devlc = readl(&dev->op_regs->devlc);
VDBG(dev, "devlc = 0x%08x\n", devlc);
devlc &= ~LPM_PHCD;
writel(devlc, &dev->op_regs->devlc);
spin_unlock_irqrestore(&dev->lock, flags);
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* notify controller that VBUS is powered or not */
static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
{
struct langwell_udc *dev;
unsigned long flags;
u32 usbcmd;
if (!_gadget)
return -ENODEV;
dev = container_of(_gadget, struct langwell_udc, gadget);
VDBG(dev, "---> %s()\n", __func__);
spin_lock_irqsave(&dev->lock, flags);
VDBG(dev, "VBUS status: %s\n", is_active ? "on" : "off");
dev->vbus_active = (is_active != 0);
if (dev->driver && dev->softconnected && dev->vbus_active) {
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd |= CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
} else {
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd &= ~CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
}
spin_unlock_irqrestore(&dev->lock, flags);
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* constrain controller's VBUS power usage */
static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
{
struct langwell_udc *dev;
if (!_gadget)
return -ENODEV;
dev = container_of(_gadget, struct langwell_udc, gadget);
VDBG(dev, "---> %s()\n", __func__);
if (dev->transceiver) {
VDBG(dev, "otg_set_power\n");
VDBG(dev, "<--- %s()\n", __func__);
return otg_set_power(dev->transceiver, mA);
}
VDBG(dev, "<--- %s()\n", __func__);
return -ENOTSUPP;
}
/* D+ pullup, software-controlled connect/disconnect to USB host */
static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
{
struct langwell_udc *dev;
u32 usbcmd;
unsigned long flags;
if (!_gadget)
return -ENODEV;
dev = container_of(_gadget, struct langwell_udc, gadget);
VDBG(dev, "---> %s()\n", __func__);
spin_lock_irqsave(&dev->lock, flags);
dev->softconnected = (is_on != 0);
if (dev->driver && dev->softconnected && dev->vbus_active) {
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd |= CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
} else {
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd &= ~CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
}
spin_unlock_irqrestore(&dev->lock, flags);
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* device controller usb_gadget_ops structure */
static const struct usb_gadget_ops langwell_ops = {
/* returns the current frame number */
.get_frame = langwell_get_frame,
/* tries to wake up the host connected to this gadget */
.wakeup = langwell_wakeup,
/* set the device selfpowered feature, always selfpowered */
/* .set_selfpowered = langwell_set_selfpowered, */
/* notify controller that VBUS is powered or not */
.vbus_session = langwell_vbus_session,
/* constrain controller's VBUS power usage */
.vbus_draw = langwell_vbus_draw,
/* D+ pullup, software-controlled connect/disconnect to USB host */
.pullup = langwell_pullup,
};
/*-------------------------------------------------------------------------*/
/* device controller operations */
/* reset device controller */
static int langwell_udc_reset(struct langwell_udc *dev)
{
u32 usbcmd, usbmode, devlc, endpointlistaddr;
unsigned long timeout;
if (!dev)
return -EINVAL;
DBG(dev, "---> %s()\n", __func__);
/* set controller to stop state */
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd &= ~CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
/* reset device controller */
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd |= CMD_RST;
writel(usbcmd, &dev->op_regs->usbcmd);
/* wait for reset to complete */
timeout = jiffies + RESET_TIMEOUT;
while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
if (time_after(jiffies, timeout)) {
ERROR(dev, "device reset timeout\n");
return -ETIMEDOUT;
}
cpu_relax();
}
/* set controller to device mode */
usbmode = readl(&dev->op_regs->usbmode);
usbmode |= MODE_DEVICE;
/* turn setup lockout off, require setup tripwire in usbcmd */
usbmode |= MODE_SLOM;
writel(usbmode, &dev->op_regs->usbmode);
usbmode = readl(&dev->op_regs->usbmode);
VDBG(dev, "usbmode=0x%08x\n", usbmode);
/* Write-Clear setup status */
writel(0, &dev->op_regs->usbsts);
/* if support USB LPM, ACK all LPM token */
if (dev->lpm) {
devlc = readl(&dev->op_regs->devlc);
devlc &= ~LPM_STL; /* don't STALL LPM token */
devlc &= ~LPM_NYT_ACK; /* ACK LPM token */
writel(devlc, &dev->op_regs->devlc);
}
/* fill endpointlistaddr register */
endpointlistaddr = dev->ep_dqh_dma;
endpointlistaddr &= ENDPOINTLISTADDR_MASK;
writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
VDBG(dev, "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
dev->ep_dqh, endpointlistaddr,
readl(&dev->op_regs->endpointlistaddr));
DBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* reinitialize device controller endpoints */
static int eps_reinit(struct langwell_udc *dev)
{
struct langwell_ep *ep;
char name[14];
int i;
VDBG(dev, "---> %s()\n", __func__);
/* initialize ep0 */
ep = &dev->ep[0];
ep->dev = dev;
strncpy(ep->name, "ep0", sizeof(ep->name));
ep->ep.name = ep->name;
ep->ep.ops = &langwell_ep_ops;
ep->stopped = 0;
ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
ep->ep_num = 0;
ep->desc = &langwell_ep0_desc;
INIT_LIST_HEAD(&ep->queue);
ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
/* initialize other endpoints */
for (i = 2; i < dev->ep_max; i++) {
ep = &dev->ep[i];
if (i % 2)
snprintf(name, sizeof(name), "ep%din", i / 2);
else
snprintf(name, sizeof(name), "ep%dout", i / 2);
ep->dev = dev;
strncpy(ep->name, name, sizeof(ep->name));
ep->ep.name = ep->name;
ep->ep.ops = &langwell_ep_ops;
ep->stopped = 0;
ep->ep.maxpacket = (unsigned short) ~0;
ep->ep_num = i / 2;
INIT_LIST_HEAD(&ep->queue);
list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
ep->dqh = &dev->ep_dqh[i];
}
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* enable interrupt and set controller to run state */
static void langwell_udc_start(struct langwell_udc *dev)
{
u32 usbintr, usbcmd;
DBG(dev, "---> %s()\n", __func__);
/* enable interrupts */
usbintr = INTR_ULPIE /* ULPI */
| INTR_SLE /* suspend */
/* | INTR_SRE SOF received */
| INTR_URE /* USB reset */
| INTR_AAE /* async advance */
| INTR_SEE /* system error */
| INTR_FRE /* frame list rollover */
| INTR_PCE /* port change detect */
| INTR_UEE /* USB error interrupt */
| INTR_UE; /* USB interrupt */
writel(usbintr, &dev->op_regs->usbintr);
/* clear stopped bit */
dev->stopped = 0;
/* set controller to run */
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd |= CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
DBG(dev, "<--- %s()\n", __func__);
return;
}
/* disable interrupt and set controller to stop state */
static void langwell_udc_stop(struct langwell_udc *dev)
{
u32 usbcmd;
DBG(dev, "---> %s()\n", __func__);
/* disable all interrupts */
writel(0, &dev->op_regs->usbintr);
/* set stopped bit */
dev->stopped = 1;
/* set controller to stop state */
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd &= ~CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
DBG(dev, "<--- %s()\n", __func__);
return;
}
/* stop all USB activities */
static void stop_activity(struct langwell_udc *dev,
struct usb_gadget_driver *driver)
{
struct langwell_ep *ep;
DBG(dev, "---> %s()\n", __func__);
nuke(&dev->ep[0], -ESHUTDOWN);
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
nuke(ep, -ESHUTDOWN);
}
/* report disconnect; the driver is already quiesced */
if (driver) {
spin_unlock(&dev->lock);
driver->disconnect(&dev->gadget);
spin_lock(&dev->lock);
}
DBG(dev, "<--- %s()\n", __func__);
}
/*-------------------------------------------------------------------------*/
/* device "function" sysfs attribute file */
static ssize_t show_function(struct device *_dev,
struct device_attribute *attr, char *buf)
{
struct langwell_udc *dev = the_controller;
if (!dev->driver || !dev->driver->function
|| strlen(dev->driver->function) > PAGE_SIZE)
return 0;
return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
}
static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
/* device "langwell_udc" sysfs attribute file */
static ssize_t show_langwell_udc(struct device *_dev,
struct device_attribute *attr, char *buf)
{
struct langwell_udc *dev = the_controller;
struct langwell_request *req;
struct langwell_ep *ep = NULL;
char *next;
unsigned size;
unsigned t;
unsigned i;
unsigned long flags;
u32 tmp_reg;
next = buf;
size = PAGE_SIZE;
spin_lock_irqsave(&dev->lock, flags);
/* driver basic information */
t = scnprintf(next, size,
DRIVER_DESC "\n"
"%s version: %s\n"
"Gadget driver: %s\n\n",
driver_name, DRIVER_VERSION,
dev->driver ? dev->driver->driver.name : "(none)");
size -= t;
next += t;
/* device registers */
tmp_reg = readl(&dev->op_regs->usbcmd);
t = scnprintf(next, size,
"USBCMD reg:\n"
"SetupTW: %d\n"
"Run/Stop: %s\n\n",
(tmp_reg & CMD_SUTW) ? 1 : 0,
(tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->usbsts);
t = scnprintf(next, size,
"USB Status Reg:\n"
"Device Suspend: %d\n"
"Reset Received: %d\n"
"System Error: %s\n"
"USB Error Interrupt: %s\n\n",
(tmp_reg & STS_SLI) ? 1 : 0,
(tmp_reg & STS_URI) ? 1 : 0,
(tmp_reg & STS_SEI) ? "Error" : "No error",
(tmp_reg & STS_UEI) ? "Error detected" : "No error");
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->usbintr);
t = scnprintf(next, size,
"USB Intrrupt Enable Reg:\n"
"Sleep Enable: %d\n"
"SOF Received Enable: %d\n"
"Reset Enable: %d\n"
"System Error Enable: %d\n"
"Port Change Dectected Enable: %d\n"
"USB Error Intr Enable: %d\n"
"USB Intr Enable: %d\n\n",
(tmp_reg & INTR_SLE) ? 1 : 0,
(tmp_reg & INTR_SRE) ? 1 : 0,
(tmp_reg & INTR_URE) ? 1 : 0,
(tmp_reg & INTR_SEE) ? 1 : 0,
(tmp_reg & INTR_PCE) ? 1 : 0,
(tmp_reg & INTR_UEE) ? 1 : 0,
(tmp_reg & INTR_UE) ? 1 : 0);
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->frindex);
t = scnprintf(next, size,
"USB Frame Index Reg:\n"
"Frame Number is 0x%08x\n\n",
(tmp_reg & FRINDEX_MASK));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->deviceaddr);
t = scnprintf(next, size,
"USB Device Address Reg:\n"
"Device Addr is 0x%x\n\n",
USBADR(tmp_reg));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->endpointlistaddr);
t = scnprintf(next, size,
"USB Endpoint List Address Reg:\n"
"Endpoint List Pointer is 0x%x\n\n",
EPBASE(tmp_reg));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->portsc1);
t = scnprintf(next, size,
"USB Port Status & Control Reg:\n"
"Port Reset: %s\n"
"Port Suspend Mode: %s\n"
"Over-current Change: %s\n"
"Port Enable/Disable Change: %s\n"
"Port Enabled/Disabled: %s\n"
"Current Connect Status: %s\n\n",
(tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
(tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
(tmp_reg & PORTS_OCC) ? "Detected" : "No",
(tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
(tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
(tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached");
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->devlc);
t = scnprintf(next, size,
"Device LPM Control Reg:\n"
"Parallel Transceiver : %d\n"
"Serial Transceiver : %d\n"
"Port Speed: %s\n"
"Port Force Full Speed Connenct: %s\n"
"PHY Low Power Suspend Clock Disable: %s\n"
"BmAttributes: %d\n\n",
LPM_PTS(tmp_reg),
(tmp_reg & LPM_STS) ? 1 : 0,
({
char *s;
switch (LPM_PSPD(tmp_reg)) {
case LPM_SPEED_FULL:
s = "Full Speed"; break;
case LPM_SPEED_LOW:
s = "Low Speed"; break;
case LPM_SPEED_HIGH:
s = "High Speed"; break;
default:
s = "Unknown Speed"; break;
}
s;
}),
(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
LPM_BA(tmp_reg));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->usbmode);
t = scnprintf(next, size,
"USB Mode Reg:\n"
"Controller Mode is : %s\n\n", ({
char *s;
switch (MODE_CM(tmp_reg)) {
case MODE_IDLE:
s = "Idle"; break;
case MODE_DEVICE:
s = "Device Controller"; break;
case MODE_HOST:
s = "Host Controller"; break;
default:
s = "None"; break;
}
s;
}));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->endptsetupstat);
t = scnprintf(next, size,
"Endpoint Setup Status Reg:\n"
"SETUP on ep 0x%04x\n\n",
tmp_reg & SETUPSTAT_MASK);
size -= t;
next += t;
for (i = 0; i < dev->ep_max / 2; i++) {
tmp_reg = readl(&dev->op_regs->endptctrl[i]);
t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
i, tmp_reg);
size -= t;
next += t;
}
tmp_reg = readl(&dev->op_regs->endptprime);
t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
size -= t;
next += t;
/* langwell_udc, langwell_ep, langwell_request structure information */
ep = &dev->ep[0];
t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
ep->ep.name, ep->ep.maxpacket, ep->ep_num);
size -= t;
next += t;
if (list_empty(&ep->queue)) {
t = scnprintf(next, size, "its req queue is empty\n\n");
size -= t;
next += t;
} else {
list_for_each_entry(req, &ep->queue, queue) {
t = scnprintf(next, size,
"req %p actual 0x%x length 0x%x buf %p\n",
&req->req, req->req.actual,
req->req.length, req->req.buf);
size -= t;
next += t;
}
}
/* other gadget->eplist ep */
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
if (ep->desc) {
t = scnprintf(next, size,
"\n%s MaxPacketSize: 0x%x, "
"ep_num: %d\n",
ep->ep.name, ep->ep.maxpacket,
ep->ep_num);
size -= t;
next += t;
if (list_empty(&ep->queue)) {
t = scnprintf(next, size,
"its req queue is empty\n\n");
size -= t;
next += t;
} else {
list_for_each_entry(req, &ep->queue, queue) {
t = scnprintf(next, size,
"req %p actual 0x%x length "
"0x%x buf %p\n",
&req->req, req->req.actual,
req->req.length, req->req.buf);
size -= t;
next += t;
}
}
}
}
spin_unlock_irqrestore(&dev->lock, flags);
return PAGE_SIZE - size;
}
static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
/*-------------------------------------------------------------------------*/
/*
* when a driver is successfully registered, it will receive
* control requests including set_configuration(), which enables
* non-control requests. then usb traffic follows until a
* disconnect is reported. then a host may connect again, or
* the driver might get unbound.
*/
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
{
struct langwell_udc *dev = the_controller;
unsigned long flags;
int retval;
if (!dev)
return -ENODEV;
DBG(dev, "---> %s()\n", __func__);
if (dev->driver)
return -EBUSY;
spin_lock_irqsave(&dev->lock, flags);
/* hook up the driver ... */
driver->driver.bus = NULL;
dev->driver = driver;
dev->gadget.dev.driver = &driver->driver;
spin_unlock_irqrestore(&dev->lock, flags);
retval = driver->bind(&dev->gadget);
if (retval) {
DBG(dev, "bind to driver %s --> %d\n",
driver->driver.name, retval);
dev->driver = NULL;
dev->gadget.dev.driver = NULL;
return retval;
}
retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
if (retval)
goto err_unbind;
dev->usb_state = USB_STATE_ATTACHED;
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
/* enable interrupt and set controller to run state */
if (dev->got_irq)
langwell_udc_start(dev);
VDBG(dev, "After langwell_udc_start(), print all registers:\n");
#ifdef VERBOSE
print_all_registers(dev);
#endif
INFO(dev, "register driver: %s\n", driver->driver.name);
VDBG(dev, "<--- %s()\n", __func__);
return 0;
err_unbind:
driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
DBG(dev, "<--- %s()\n", __func__);
return retval;
}
EXPORT_SYMBOL(usb_gadget_register_driver);
/* unregister gadget driver */
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
struct langwell_udc *dev = the_controller;
unsigned long flags;
if (!dev)
return -ENODEV;
DBG(dev, "---> %s()\n", __func__);
if (unlikely(!driver || !driver->bind || !driver->unbind))
return -EINVAL;
/* unbind OTG transceiver */
if (dev->transceiver)
(void)otg_set_peripheral(dev->transceiver, 0);
/* disable interrupt and set controller to stop state */
langwell_udc_stop(dev);
dev->usb_state = USB_STATE_ATTACHED;
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
spin_lock_irqsave(&dev->lock, flags);
/* stop all usb activities */
dev->gadget.speed = USB_SPEED_UNKNOWN;
stop_activity(dev, driver);
spin_unlock_irqrestore(&dev->lock, flags);
/* unbind gadget driver */
driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
device_remove_file(&dev->pdev->dev, &dev_attr_function);
INFO(dev, "unregistered driver '%s'\n", driver->driver.name);
DBG(dev, "<--- %s()\n", __func__);
return 0;
}
EXPORT_SYMBOL(usb_gadget_unregister_driver);
/*-------------------------------------------------------------------------*/
/*
* setup tripwire is used as a semaphore to ensure that the setup data
* payload is extracted from a dQH without being corrupted
*/
static void setup_tripwire(struct langwell_udc *dev)
{
u32 usbcmd,
endptsetupstat;
unsigned long timeout;
struct langwell_dqh *dqh;
VDBG(dev, "---> %s()\n", __func__);
/* ep0 OUT dQH */
dqh = &dev->ep_dqh[EP_DIR_OUT];
/* Write-Clear endptsetupstat */
endptsetupstat = readl(&dev->op_regs->endptsetupstat);
writel(endptsetupstat, &dev->op_regs->endptsetupstat);
/* wait until endptsetupstat is cleared */
timeout = jiffies + SETUPSTAT_TIMEOUT;
while (readl(&dev->op_regs->endptsetupstat)) {
if (time_after(jiffies, timeout)) {
ERROR(dev, "setup_tripwire timeout\n");
break;
}
cpu_relax();
}
/* while a hazard exists when setup packet arrives */
do {
/* set setup tripwire bit */
usbcmd = readl(&dev->op_regs->usbcmd);
writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
/* copy the setup packet to local buffer */
memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
} while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
/* Write-Clear setup tripwire bit */
usbcmd = readl(&dev->op_regs->usbcmd);
writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
VDBG(dev, "<--- %s()\n", __func__);
}
/* protocol ep0 stall, will automatically be cleared on new transaction */
static void ep0_stall(struct langwell_udc *dev)
{
u32 endptctrl;
VDBG(dev, "---> %s()\n", __func__);
/* set TX and RX to stall */
endptctrl = readl(&dev->op_regs->endptctrl[0]);
endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
writel(endptctrl, &dev->op_regs->endptctrl[0]);
/* update ep0 state */
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
VDBG(dev, "<--- %s()\n", __func__);
}
/* PRIME a status phase for ep0 */
static int prime_status_phase(struct langwell_udc *dev, int dir)
{
struct langwell_request *req;
struct langwell_ep *ep;
int status = 0;
VDBG(dev, "---> %s()\n", __func__);
if (dir == EP_DIR_IN)
dev->ep0_dir = USB_DIR_IN;
else
dev->ep0_dir = USB_DIR_OUT;
ep = &dev->ep[0];
dev->ep0_state = WAIT_FOR_OUT_STATUS;
req = dev->status_req;
req->ep = ep;
req->req.length = 0;
req->req.status = -EINPROGRESS;
req->req.actual = 0;
req->req.complete = NULL;
req->dtd_count = 0;
if (!req_to_dtd(req))
status = queue_dtd(ep, req);
else
return -ENOMEM;
if (status)
ERROR(dev, "can't queue ep0 status request\n");
list_add_tail(&req->queue, &ep->queue);
VDBG(dev, "<--- %s()\n", __func__);
return status;
}
/* SET_ADDRESS request routine */
static void set_address(struct langwell_udc *dev, u16 value,
u16 index, u16 length)
{
VDBG(dev, "---> %s()\n", __func__);
/* save the new address to device struct */
dev->dev_addr = (u8) value;
VDBG(dev, "dev->dev_addr = %d\n", dev->dev_addr);
/* update usb state */
dev->usb_state = USB_STATE_ADDRESS;
/* STATUS phase */
if (prime_status_phase(dev, EP_DIR_IN))
ep0_stall(dev);
VDBG(dev, "<--- %s()\n", __func__);
}
/* return endpoint by windex */
static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
u16 wIndex)
{
struct langwell_ep *ep;
VDBG(dev, "---> %s()\n", __func__);
if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
return &dev->ep[0];
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
u8 bEndpointAddress;
if (!ep->desc)
continue;
bEndpointAddress = ep->desc->bEndpointAddress;
if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
continue;
if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
== (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
return ep;
}
VDBG(dev, "<--- %s()\n", __func__);
return NULL;
}
/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
static int ep_is_stall(struct langwell_ep *ep)
{
struct langwell_udc *dev = ep->dev;
u32 endptctrl;
int retval;
VDBG(dev, "---> %s()\n", __func__);
endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
if (is_in(ep))
retval = endptctrl & EPCTRL_TXS ? 1 : 0;
else
retval = endptctrl & EPCTRL_RXS ? 1 : 0;
VDBG(dev, "<--- %s()\n", __func__);
return retval;
}
/* GET_STATUS request routine */
static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
u16 index, u16 length)
{
struct langwell_request *req;
struct langwell_ep *ep;
u16 status_data = 0; /* 16 bits cpu view status data */
int status = 0;
VDBG(dev, "---> %s()\n", __func__);
ep = &dev->ep[0];
if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
/* get device status */
status_data = 1 << USB_DEVICE_SELF_POWERED;
status_data |= dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
/* get interface status */
status_data = 0;
} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
/* get endpoint status */
struct langwell_ep *epn;
epn = get_ep_by_windex(dev, index);
/* stall if endpoint doesn't exist */
if (!epn)
goto stall;
status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
}
dev->ep0_dir = USB_DIR_IN;
/* borrow the per device status_req */
req = dev->status_req;
/* fill in the reqest structure */
*((u16 *) req->req.buf) = cpu_to_le16(status_data);
req->ep = ep;
req->req.length = 2;
req->req.status = -EINPROGRESS;
req->req.actual = 0;
req->req.complete = NULL;
req->dtd_count = 0;
/* prime the data phase */
if (!req_to_dtd(req))
status = queue_dtd(ep, req);
else /* no mem */
goto stall;
if (status) {
ERROR(dev, "response error on GET_STATUS request\n");
goto stall;
}
list_add_tail(&req->queue, &ep->queue);
dev->ep0_state = DATA_STATE_XMIT;
VDBG(dev, "<--- %s()\n", __func__);
return;
stall:
ep0_stall(dev);
VDBG(dev, "<--- %s()\n", __func__);
}
/* setup packet interrupt handler */
static void handle_setup_packet(struct langwell_udc *dev,
struct usb_ctrlrequest *setup)
{
u16 wValue = le16_to_cpu(setup->wValue);
u16 wIndex = le16_to_cpu(setup->wIndex);
u16 wLength = le16_to_cpu(setup->wLength);
VDBG(dev, "---> %s()\n", __func__);
/* ep0 fifo flush */
nuke(&dev->ep[0], -ESHUTDOWN);
DBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
setup->bRequestType, setup->bRequest,
wValue, wIndex, wLength);
/* RNDIS gadget delegate */
if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
/* USB_CDC_SEND_ENCAPSULATED_COMMAND */
goto delegate;
}
/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
goto delegate;
}
/* We process some stardard setup requests here */
switch (setup->bRequest) {
case USB_REQ_GET_STATUS:
DBG(dev, "SETUP: USB_REQ_GET_STATUS\n");
/* get status, DATA and STATUS phase */
if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
!= (USB_DIR_IN | USB_TYPE_STANDARD))
break;
get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
goto end;
case USB_REQ_SET_ADDRESS:
DBG(dev, "SETUP: USB_REQ_SET_ADDRESS\n");
/* STATUS phase */
if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
| USB_RECIP_DEVICE))
break;
set_address(dev, wValue, wIndex, wLength);
goto end;
case USB_REQ_CLEAR_FEATURE:
case USB_REQ_SET_FEATURE:
/* STATUS phase */
{
int rc = -EOPNOTSUPP;
if (setup->bRequest == USB_REQ_SET_FEATURE)
DBG(dev, "SETUP: USB_REQ_SET_FEATURE\n");
else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
DBG(dev, "SETUP: USB_REQ_CLEAR_FEATURE\n");
if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
== (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
struct langwell_ep *epn;
epn = get_ep_by_windex(dev, wIndex);
/* stall if endpoint doesn't exist */
if (!epn) {
ep0_stall(dev);
goto end;
}
if (wValue != 0 || wLength != 0
|| epn->ep_num > dev->ep_max)
break;
spin_unlock(&dev->lock);
rc = langwell_ep_set_halt(&epn->ep,
(setup->bRequest == USB_REQ_SET_FEATURE)
? 1 : 0);
spin_lock(&dev->lock);
} else if ((setup->bRequestType & (USB_RECIP_MASK
| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
| USB_TYPE_STANDARD)) {
if (!gadget_is_otg(&dev->gadget))
break;
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
dev->gadget.b_hnp_enable = 1;
#ifdef OTG_TRANSCEIVER
if (!dev->lotg->otg.default_a)
dev->lotg->hsm.b_hnp_enable = 1;
#endif
} else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
dev->gadget.a_hnp_support = 1;
else if (setup->bRequest ==
USB_DEVICE_A_ALT_HNP_SUPPORT)
dev->gadget.a_alt_hnp_support = 1;
else
break;
rc = 0;
} else
break;
if (rc == 0) {
if (prime_status_phase(dev, EP_DIR_IN))
ep0_stall(dev);
}
goto end;
}
case USB_REQ_GET_DESCRIPTOR:
DBG(dev, "SETUP: USB_REQ_GET_DESCRIPTOR\n");
goto delegate;
case USB_REQ_SET_DESCRIPTOR:
DBG(dev, "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
goto delegate;
case USB_REQ_GET_CONFIGURATION:
DBG(dev, "SETUP: USB_REQ_GET_CONFIGURATION\n");
goto delegate;
case USB_REQ_SET_CONFIGURATION:
DBG(dev, "SETUP: USB_REQ_SET_CONFIGURATION\n");
goto delegate;
case USB_REQ_GET_INTERFACE:
DBG(dev, "SETUP: USB_REQ_GET_INTERFACE\n");
goto delegate;
case USB_REQ_SET_INTERFACE:
DBG(dev, "SETUP: USB_REQ_SET_INTERFACE\n");
goto delegate;
case USB_REQ_SYNCH_FRAME:
DBG(dev, "SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
goto delegate;
default:
/* delegate USB standard requests to the gadget driver */
goto delegate;
delegate:
/* USB requests handled by gadget */
if (wLength) {
/* DATA phase from gadget, STATUS phase from udc */
dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
? USB_DIR_IN : USB_DIR_OUT;
VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
dev->ep0_dir, wLength);
spin_unlock(&dev->lock);
if (dev->driver->setup(&dev->gadget,
&dev->local_setup_buff) < 0)
ep0_stall(dev);
spin_lock(&dev->lock);
dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
? DATA_STATE_XMIT : DATA_STATE_RECV;
} else {
/* no DATA phase, IN STATUS phase from gadget */
dev->ep0_dir = USB_DIR_IN;
VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
dev->ep0_dir, wLength);
spin_unlock(&dev->lock);
if (dev->driver->setup(&dev->gadget,
&dev->local_setup_buff) < 0)
ep0_stall(dev);
spin_lock(&dev->lock);
dev->ep0_state = WAIT_FOR_OUT_STATUS;
}
break;
}
end:
VDBG(dev, "<--- %s()\n", __func__);
return;
}
/* transfer completion, process endpoint request and free the completed dTDs
* for this request
*/
static int process_ep_req(struct langwell_udc *dev, int index,
struct langwell_request *curr_req)
{
struct langwell_dtd *curr_dtd;
struct langwell_dqh *curr_dqh;
int td_complete, actual, remaining_length;
int i, dir;
u8 dtd_status = 0;
int retval = 0;
curr_dqh = &dev->ep_dqh[index];
dir = index % 2;
curr_dtd = curr_req->head;
td_complete = 0;
actual = curr_req->req.length;
VDBG(dev, "---> %s()\n", __func__);
for (i = 0; i < curr_req->dtd_count; i++) {
remaining_length = le16_to_cpu(curr_dtd->dtd_total);
actual -= remaining_length;
/* command execution states by dTD */
dtd_status = curr_dtd->dtd_status;
if (!dtd_status) {
/* transfers completed successfully */
if (!remaining_length) {
td_complete++;
VDBG(dev, "dTD transmitted successfully\n");
} else {
if (dir) {
VDBG(dev, "TX dTD remains data\n");
retval = -EPROTO;
break;
} else {
td_complete++;
break;
}
}
} else {
/* transfers completed with errors */
if (dtd_status & DTD_STS_ACTIVE) {
DBG(dev, "request not completed\n");
retval = 1;
return retval;
} else if (dtd_status & DTD_STS_HALTED) {
ERROR(dev, "dTD error %08x dQH[%d]\n",
dtd_status, index);
/* clear the errors and halt condition */
curr_dqh->dtd_status = 0;
retval = -EPIPE;
break;
} else if (dtd_status & DTD_STS_DBE) {
DBG(dev, "data buffer (overflow) error\n");
retval = -EPROTO;
break;
} else if (dtd_status & DTD_STS_TRE) {
DBG(dev, "transaction(ISO) error\n");
retval = -EILSEQ;
break;
} else
ERROR(dev, "unknown error (0x%x)!\n",
dtd_status);
}
if (i != curr_req->dtd_count - 1)
curr_dtd = (struct langwell_dtd *)
curr_dtd->next_dtd_virt;
}
if (retval)
return retval;
curr_req->req.actual = actual;
VDBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* complete DATA or STATUS phase of ep0 prime status phase if needed */
static void ep0_req_complete(struct langwell_udc *dev,
struct langwell_ep *ep0, struct langwell_request *req)
{
u32 new_addr;
VDBG(dev, "---> %s()\n", __func__);
if (dev->usb_state == USB_STATE_ADDRESS) {
/* set the new address */
new_addr = (u32)dev->dev_addr;
writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
VDBG(dev, "new_addr = %d\n", new_addr);
}
done(ep0, req, 0);
switch (dev->ep0_state) {
case DATA_STATE_XMIT:
/* receive status phase */
if (prime_status_phase(dev, EP_DIR_OUT))
ep0_stall(dev);
break;
case DATA_STATE_RECV:
/* send status phase */
if (prime_status_phase(dev, EP_DIR_IN))
ep0_stall(dev);
break;
case WAIT_FOR_OUT_STATUS:
dev->ep0_state = WAIT_FOR_SETUP;
break;
case WAIT_FOR_SETUP:
ERROR(dev, "unexpect ep0 packets\n");
break;
default:
ep0_stall(dev);
break;
}
VDBG(dev, "<--- %s()\n", __func__);
}
/* USB transfer completion interrupt */
static void handle_trans_complete(struct langwell_udc *dev)
{
u32 complete_bits;
int i, ep_num, dir, bit_mask, status;
struct langwell_ep *epn;
struct langwell_request *curr_req, *temp_req;
VDBG(dev, "---> %s()\n", __func__);
complete_bits = readl(&dev->op_regs->endptcomplete);
VDBG(dev, "endptcomplete register: 0x%08x\n", complete_bits);
/* Write-Clear the bits in endptcomplete register */
writel(complete_bits, &dev->op_regs->endptcomplete);
if (!complete_bits) {
DBG(dev, "complete_bits = 0\n");
goto done;
}
for (i = 0; i < dev->ep_max; i++) {
ep_num = i / 2;
dir = i % 2;
bit_mask = 1 << (ep_num + 16 * dir);
if (!(complete_bits & bit_mask))
continue;
/* ep0 */
if (i == 1)
epn = &dev->ep[0];
else
epn = &dev->ep[i];
if (epn->name == NULL) {
WARNING(dev, "invalid endpoint\n");
continue;
}
if (i < 2)
/* ep0 in and out */
DBG(dev, "%s-%s transfer completed\n",
epn->name,
is_in(epn) ? "in" : "out");
else
DBG(dev, "%s transfer completed\n", epn->name);
/* process the req queue until an uncomplete request */
list_for_each_entry_safe(curr_req, temp_req,
&epn->queue, queue) {
status = process_ep_req(dev, i, curr_req);
VDBG(dev, "%s req status: %d\n", epn->name, status);
if (status)
break;
/* write back status to req */
curr_req->req.status = status;
/* ep0 request completion */
if (ep_num == 0) {
ep0_req_complete(dev, epn, curr_req);
break;
} else {
done(epn, curr_req, status);
}
}
}
done:
VDBG(dev, "<--- %s()\n", __func__);
return;
}
/* port change detect interrupt handler */
static void handle_port_change(struct langwell_udc *dev)
{
u32 portsc1, devlc;
u32 speed;
VDBG(dev, "---> %s()\n", __func__);
if (dev->bus_reset)
dev->bus_reset = 0;
portsc1 = readl(&dev->op_regs->portsc1);
devlc = readl(&dev->op_regs->devlc);
VDBG(dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
portsc1, devlc);
/* bus reset is finished */
if (!(portsc1 & PORTS_PR)) {
/* get the speed */
speed = LPM_PSPD(devlc);
switch (speed) {
case LPM_SPEED_HIGH:
dev->gadget.speed = USB_SPEED_HIGH;
break;
case LPM_SPEED_FULL:
dev->gadget.speed = USB_SPEED_FULL;
break;
case LPM_SPEED_LOW:
dev->gadget.speed = USB_SPEED_LOW;
break;
default:
dev->gadget.speed = USB_SPEED_UNKNOWN;
break;
}
VDBG(dev, "speed = %d, dev->gadget.speed = %d\n",
speed, dev->gadget.speed);
}
/* LPM L0 to L1 */
if (dev->lpm && dev->lpm_state == LPM_L0)
if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
INFO(dev, "LPM L0 to L1\n");
dev->lpm_state = LPM_L1;
}
/* LPM L1 to L0, force resume or remote wakeup finished */
if (dev->lpm && dev->lpm_state == LPM_L1)
if (!(portsc1 & PORTS_SUSP)) {
if (portsc1 & PORTS_SLP)
INFO(dev, "LPM L1 to L0, force resume\n");
else
INFO(dev, "LPM L1 to L0, remote wakeup\n");
dev->lpm_state = LPM_L0;
}
/* update USB state */
if (!dev->resume_state)
dev->usb_state = USB_STATE_DEFAULT;
VDBG(dev, "<--- %s()\n", __func__);
}
/* USB reset interrupt handler */
static void handle_usb_reset(struct langwell_udc *dev)
{
u32 deviceaddr,
endptsetupstat,
endptcomplete;
unsigned long timeout;
VDBG(dev, "---> %s()\n", __func__);
/* Write-Clear the device address */
deviceaddr = readl(&dev->op_regs->deviceaddr);
writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
dev->dev_addr = 0;
/* clear usb state */
dev->resume_state = 0;
/* LPM L1 to L0, reset */
if (dev->lpm)
dev->lpm_state = LPM_L0;
dev->ep0_dir = USB_DIR_OUT;
dev->ep0_state = WAIT_FOR_SETUP;
dev->remote_wakeup = 0; /* default to 0 on reset */
dev->gadget.b_hnp_enable = 0;
dev->gadget.a_hnp_support = 0;
dev->gadget.a_alt_hnp_support = 0;
/* Write-Clear all the setup token semaphores */
endptsetupstat = readl(&dev->op_regs->endptsetupstat);
writel(endptsetupstat, &dev->op_regs->endptsetupstat);
/* Write-Clear all the endpoint complete status bits */
endptcomplete = readl(&dev->op_regs->endptcomplete);
writel(endptcomplete, &dev->op_regs->endptcomplete);
/* wait until all endptprime bits cleared */
timeout = jiffies + PRIME_TIMEOUT;
while (readl(&dev->op_regs->endptprime)) {
if (time_after(jiffies, timeout)) {
ERROR(dev, "USB reset timeout\n");
break;
}
cpu_relax();
}
/* write 1s to endptflush register to clear any primed buffers */
writel((u32) ~0, &dev->op_regs->endptflush);
if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
VDBG(dev, "USB bus reset\n");
/* bus is reseting */
dev->bus_reset = 1;
/* reset all the queues, stop all USB activities */
stop_activity(dev, dev->driver);
dev->usb_state = USB_STATE_DEFAULT;
} else {
VDBG(dev, "device controller reset\n");
/* controller reset */
langwell_udc_reset(dev);
/* reset all the queues, stop all USB activities */
stop_activity(dev, dev->driver);
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
/* enable interrupt and set controller to run state */
langwell_udc_start(dev);
dev->usb_state = USB_STATE_ATTACHED;
}
#ifdef OTG_TRANSCEIVER
/* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
if (!dev->lotg->otg.default_a)
dev->lotg->hsm.b_hnp_enable = 0;
#endif
VDBG(dev, "<--- %s()\n", __func__);
}
/* USB bus suspend/resume interrupt */
static void handle_bus_suspend(struct langwell_udc *dev)
{
u32 devlc;
DBG(dev, "---> %s()\n", __func__);
dev->resume_state = dev->usb_state;
dev->usb_state = USB_STATE_SUSPENDED;
#ifdef OTG_TRANSCEIVER
if (dev->lotg->otg.default_a) {
if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
dev->lotg->hsm.b_bus_suspend = 1;
/* notify transceiver the state changes */
if (spin_trylock(&dev->lotg->wq_lock)) {
langwell_update_transceiver();
spin_unlock(&dev->lotg->wq_lock);
}
}
dev->lotg->hsm.b_bus_suspend_vld++;
} else {
if (!dev->lotg->hsm.a_bus_suspend) {
dev->lotg->hsm.a_bus_suspend = 1;
/* notify transceiver the state changes */
if (spin_trylock(&dev->lotg->wq_lock)) {
langwell_update_transceiver();
spin_unlock(&dev->lotg->wq_lock);
}
}
}
#endif
/* report suspend to the driver */
if (dev->driver) {
if (dev->driver->suspend) {
spin_unlock(&dev->lock);
dev->driver->suspend(&dev->gadget);
spin_lock(&dev->lock);
DBG(dev, "suspend %s\n", dev->driver->driver.name);
}
}
/* enter PHY low power suspend */
devlc = readl(&dev->op_regs->devlc);
VDBG(dev, "devlc = 0x%08x\n", devlc);
devlc |= LPM_PHCD;
writel(devlc, &dev->op_regs->devlc);
DBG(dev, "<--- %s()\n", __func__);
}
static void handle_bus_resume(struct langwell_udc *dev)
{
u32 devlc;
DBG(dev, "---> %s()\n", __func__);
dev->usb_state = dev->resume_state;
dev->resume_state = 0;
/* exit PHY low power suspend */
devlc = readl(&dev->op_regs->devlc);
VDBG(dev, "devlc = 0x%08x\n", devlc);
devlc &= ~LPM_PHCD;
writel(devlc, &dev->op_regs->devlc);
#ifdef OTG_TRANSCEIVER
if (dev->lotg->otg.default_a == 0)
dev->lotg->hsm.a_bus_suspend = 0;
#endif
/* report resume to the driver */
if (dev->driver) {
if (dev->driver->resume) {
spin_unlock(&dev->lock);
dev->driver->resume(&dev->gadget);
spin_lock(&dev->lock);
DBG(dev, "resume %s\n", dev->driver->driver.name);
}
}
DBG(dev, "<--- %s()\n", __func__);
}
/* USB device controller interrupt handler */
static irqreturn_t langwell_irq(int irq, void *_dev)
{
struct langwell_udc *dev = _dev;
u32 usbsts,
usbintr,
irq_sts,
portsc1;
VDBG(dev, "---> %s()\n", __func__);
if (dev->stopped) {
VDBG(dev, "handle IRQ_NONE\n");
VDBG(dev, "<--- %s()\n", __func__);
return IRQ_NONE;
}
spin_lock(&dev->lock);
/* USB status */
usbsts = readl(&dev->op_regs->usbsts);
/* USB interrupt enable */
usbintr = readl(&dev->op_regs->usbintr);
irq_sts = usbsts & usbintr;
VDBG(dev, "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
usbsts, usbintr, irq_sts);
if (!irq_sts) {
VDBG(dev, "handle IRQ_NONE\n");
VDBG(dev, "<--- %s()\n", __func__);
spin_unlock(&dev->lock);
return IRQ_NONE;
}
/* Write-Clear interrupt status bits */
writel(irq_sts, &dev->op_regs->usbsts);
/* resume from suspend */
portsc1 = readl(&dev->op_regs->portsc1);
if (dev->usb_state == USB_STATE_SUSPENDED)
if (!(portsc1 & PORTS_SUSP))
handle_bus_resume(dev);
/* USB interrupt */
if (irq_sts & STS_UI) {
VDBG(dev, "USB interrupt\n");
/* setup packet received from ep0 */
if (readl(&dev->op_regs->endptsetupstat)
& EP0SETUPSTAT_MASK) {
VDBG(dev, "USB SETUP packet received interrupt\n");
/* setup tripwire semaphone */
setup_tripwire(dev);
handle_setup_packet(dev, &dev->local_setup_buff);
}
/* USB transfer completion */
if (readl(&dev->op_regs->endptcomplete)) {
VDBG(dev, "USB transfer completion interrupt\n");
handle_trans_complete(dev);
}
}
/* SOF received interrupt (for ISO transfer) */
if (irq_sts & STS_SRI) {
/* FIXME */
/* VDBG(dev, "SOF received interrupt\n"); */
}
/* port change detect interrupt */
if (irq_sts & STS_PCI) {
VDBG(dev, "port change detect interrupt\n");
handle_port_change(dev);
}
/* suspend interrrupt */
if (irq_sts & STS_SLI) {
VDBG(dev, "suspend interrupt\n");
handle_bus_suspend(dev);
}
/* USB reset interrupt */
if (irq_sts & STS_URI) {
VDBG(dev, "USB reset interrupt\n");
handle_usb_reset(dev);
}
/* USB error or system error interrupt */
if (irq_sts & (STS_UEI | STS_SEI)) {
/* FIXME */
WARNING(dev, "error IRQ, irq_sts: %x\n", irq_sts);
}
spin_unlock(&dev->lock);
VDBG(dev, "<--- %s()\n", __func__);
return IRQ_HANDLED;
}
/*-------------------------------------------------------------------------*/
/* release device structure */
static void gadget_release(struct device *_dev)
{
struct langwell_udc *dev = the_controller;
DBG(dev, "---> %s()\n", __func__);
complete(dev->done);
DBG(dev, "<--- %s()\n", __func__);
kfree(dev);
}
/* tear down the binding between this driver and the pci device */
static void langwell_udc_remove(struct pci_dev *pdev)
{
struct langwell_udc *dev = the_controller;
DECLARE_COMPLETION(done);
BUG_ON(dev->driver);
DBG(dev, "---> %s()\n", __func__);
dev->done = &done;
/* free memory allocated in probe */
if (dev->dtd_pool)
dma_pool_destroy(dev->dtd_pool);
if (dev->status_req) {
kfree(dev->status_req->req.buf);
kfree(dev->status_req);
}
if (dev->ep_dqh)
dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
dev->ep_dqh, dev->ep_dqh_dma);
kfree(dev->ep);
/* diable IRQ handler */
if (dev->got_irq)
free_irq(pdev->irq, dev);
#ifndef OTG_TRANSCEIVER
if (dev->cap_regs)
iounmap(dev->cap_regs);
if (dev->region)
release_mem_region(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
if (dev->enabled)
pci_disable_device(pdev);
#else
if (dev->transceiver) {
otg_put_transceiver(dev->transceiver);
dev->transceiver = NULL;
dev->lotg = NULL;
}
#endif
dev->cap_regs = NULL;
INFO(dev, "unbind\n");
DBG(dev, "<--- %s()\n", __func__);
device_unregister(&dev->gadget.dev);
device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
#ifndef OTG_TRANSCEIVER
pci_set_drvdata(pdev, NULL);
#endif
/* free dev, wait for the release() finished */
wait_for_completion(&done);
the_controller = NULL;
}
/*
* wrap this driver around the specified device, but
* don't respond over USB until a gadget driver binds to us.
*/
static int langwell_udc_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct langwell_udc *dev;
#ifndef OTG_TRANSCEIVER
unsigned long resource, len;
#endif
void __iomem *base = NULL;
size_t size;
int retval;
if (the_controller) {
dev_warn(&pdev->dev, "ignoring\n");
return -EBUSY;
}
/* alloc, and start init */
dev = kzalloc(sizeof *dev, GFP_KERNEL);
if (dev == NULL) {
retval = -ENOMEM;
goto error;
}
/* initialize device spinlock */
spin_lock_init(&dev->lock);
dev->pdev = pdev;
DBG(dev, "---> %s()\n", __func__);
#ifdef OTG_TRANSCEIVER
/* PCI device is already enabled by otg_transceiver driver */
dev->enabled = 1;
/* mem region and register base */
dev->region = 1;
dev->transceiver = otg_get_transceiver();
dev->lotg = otg_to_langwell(dev->transceiver);
base = dev->lotg->regs;
#else
pci_set_drvdata(pdev, dev);
/* now all the pci goodies ... */
if (pci_enable_device(pdev) < 0) {
retval = -ENODEV;
goto error;
}
dev->enabled = 1;
/* control register: BAR 0 */
resource = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
if (!request_mem_region(resource, len, driver_name)) {
ERROR(dev, "controller already in use\n");
retval = -EBUSY;
goto error;
}
dev->region = 1;
base = ioremap_nocache(resource, len);
#endif
if (base == NULL) {
ERROR(dev, "can't map memory\n");
retval = -EFAULT;
goto error;
}
dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
VDBG(dev, "dev->cap_regs: %p\n", dev->cap_regs);
dev->op_regs = (struct langwell_op_regs __iomem *)
(base + OP_REG_OFFSET);
VDBG(dev, "dev->op_regs: %p\n", dev->op_regs);
/* irq setup after old hardware is cleaned up */
if (!pdev->irq) {
ERROR(dev, "No IRQ. Check PCI setup!\n");
retval = -ENODEV;
goto error;
}
#ifndef OTG_TRANSCEIVER
INFO(dev, "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
pdev->irq, resource, len, base);
/* enables bus-mastering for device dev */
pci_set_master(pdev);
if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
driver_name, dev) != 0) {
ERROR(dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
goto error;
}
dev->got_irq = 1;
#endif
/* set stopped bit */
dev->stopped = 1;
/* capabilities and endpoint number */
dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
dev->dciversion = readw(&dev->cap_regs->dciversion);
dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
VDBG(dev, "dev->lpm: %d\n", dev->lpm);
VDBG(dev, "dev->dciversion: 0x%04x\n", dev->dciversion);
VDBG(dev, "dccparams: 0x%08x\n", readl(&dev->cap_regs->dccparams));
VDBG(dev, "dev->devcap: %d\n", dev->devcap);
if (!dev->devcap) {
ERROR(dev, "can't support device mode\n");
retval = -ENODEV;
goto error;
}
/* a pair of endpoints (out/in) for each address */
dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
VDBG(dev, "dev->ep_max: %d\n", dev->ep_max);
/* allocate endpoints memory */
dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
GFP_KERNEL);
if (!dev->ep) {
ERROR(dev, "allocate endpoints memory failed\n");
retval = -ENOMEM;
goto error;
}
/* allocate device dQH memory */
size = dev->ep_max * sizeof(struct langwell_dqh);
VDBG(dev, "orig size = %d\n", size);
if (size < DQH_ALIGNMENT)
size = DQH_ALIGNMENT;
else if ((size % DQH_ALIGNMENT) != 0) {
size += DQH_ALIGNMENT + 1;
size &= ~(DQH_ALIGNMENT - 1);
}
dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
&dev->ep_dqh_dma, GFP_KERNEL);
if (!dev->ep_dqh) {
ERROR(dev, "allocate dQH memory failed\n");
retval = -ENOMEM;
goto error;
}
dev->ep_dqh_size = size;
VDBG(dev, "ep_dqh_size = %d\n", dev->ep_dqh_size);
/* initialize ep0 status request structure */
dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
if (!dev->status_req) {
ERROR(dev, "allocate status_req memory failed\n");
retval = -ENOMEM;
goto error;
}
INIT_LIST_HEAD(&dev->status_req->queue);
/* allocate a small amount of memory to get valid address */
dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
dev->resume_state = USB_STATE_NOTATTACHED;
dev->usb_state = USB_STATE_POWERED;
dev->ep0_dir = USB_DIR_OUT;
dev->remote_wakeup = 0; /* default to 0 on reset */
#ifndef OTG_TRANSCEIVER
/* reset device controller */
langwell_udc_reset(dev);
#endif
/* initialize gadget structure */
dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */
INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
dev->gadget.is_dualspeed = 1; /* support dual speed */
#ifdef OTG_TRANSCEIVER
dev->gadget.is_otg = 1; /* support otg mode */
#endif
/* the "gadget" abstracts/virtualizes the controller */
dev_set_name(&dev->gadget.dev, "gadget");
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
dev->gadget.dev.release = gadget_release;
dev->gadget.name = driver_name; /* gadget name */
/* controller endpoints reinit */
eps_reinit(dev);
#ifndef OTG_TRANSCEIVER
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
#endif
/* create dTD dma_pool resource */
dev->dtd_pool = dma_pool_create("langwell_dtd",
&dev->pdev->dev,
sizeof(struct langwell_dtd),
DTD_ALIGNMENT,
DMA_BOUNDARY);
if (!dev->dtd_pool) {
retval = -ENOMEM;
goto error;
}
/* done */
INFO(dev, "%s\n", driver_desc);
INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
INFO(dev, "Driver version: " DRIVER_VERSION "\n");
INFO(dev, "Support (max) %d endpoints\n", dev->ep_max);
INFO(dev, "Device interface version: 0x%04x\n", dev->dciversion);
INFO(dev, "Controller mode: %s\n", dev->devcap ? "Device" : "Host");
INFO(dev, "Support USB LPM: %s\n", dev->lpm ? "Yes" : "No");
VDBG(dev, "After langwell_udc_probe(), print all registers:\n");
#ifdef VERBOSE
print_all_registers(dev);
#endif
the_controller = dev;
retval = device_register(&dev->gadget.dev);
if (retval)
goto error;
retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
if (retval)
goto error;
VDBG(dev, "<--- %s()\n", __func__);
return 0;
error:
if (dev) {
DBG(dev, "<--- %s()\n", __func__);
langwell_udc_remove(pdev);
}
return retval;
}
/* device controller suspend */
static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct langwell_udc *dev = the_controller;
u32 devlc;
DBG(dev, "---> %s()\n", __func__);
/* disable interrupt and set controller to stop state */
langwell_udc_stop(dev);
/* diable IRQ handler */
if (dev->got_irq)
free_irq(pdev->irq, dev);
dev->got_irq = 0;
/* save PCI state */
pci_save_state(pdev);
/* set device power state */
pci_set_power_state(pdev, PCI_D3hot);
/* enter PHY low power suspend */
devlc = readl(&dev->op_regs->devlc);
VDBG(dev, "devlc = 0x%08x\n", devlc);
devlc |= LPM_PHCD;
writel(devlc, &dev->op_regs->devlc);
DBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* device controller resume */
static int langwell_udc_resume(struct pci_dev *pdev)
{
struct langwell_udc *dev = the_controller;
u32 devlc;
DBG(dev, "---> %s()\n", __func__);
/* exit PHY low power suspend */
devlc = readl(&dev->op_regs->devlc);
VDBG(dev, "devlc = 0x%08x\n", devlc);
devlc &= ~LPM_PHCD;
writel(devlc, &dev->op_regs->devlc);
/* set device D0 power state */
pci_set_power_state(pdev, PCI_D0);
/* restore PCI state */
pci_restore_state(pdev);
/* enable IRQ handler */
if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED, driver_name, dev)
!= 0) {
ERROR(dev, "request interrupt %d failed\n", pdev->irq);
return -1;
}
dev->got_irq = 1;
/* reset and start controller to run state */
if (dev->stopped) {
/* reset device controller */
langwell_udc_reset(dev);
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
/* start device if gadget is loaded */
if (dev->driver)
langwell_udc_start(dev);
}
/* reset USB status */
dev->usb_state = USB_STATE_ATTACHED;
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
DBG(dev, "<--- %s()\n", __func__);
return 0;
}
/* pci driver shutdown */
static void langwell_udc_shutdown(struct pci_dev *pdev)
{
struct langwell_udc *dev = the_controller;
u32 usbmode;
DBG(dev, "---> %s()\n", __func__);
/* reset controller mode to IDLE */
usbmode = readl(&dev->op_regs->usbmode);
DBG(dev, "usbmode = 0x%08x\n", usbmode);
usbmode &= (~3 | MODE_IDLE);
writel(usbmode, &dev->op_regs->usbmode);
DBG(dev, "<--- %s()\n", __func__);
}
/*-------------------------------------------------------------------------*/
static const struct pci_device_id pci_ids[] = { {
.class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
.class_mask = ~0,
.vendor = 0x8086,
.device = 0x0811,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);
static struct pci_driver langwell_pci_driver = {
.name = (char *) driver_name,
.id_table = pci_ids,
.probe = langwell_udc_probe,
.remove = langwell_udc_remove,
/* device controller suspend/resume */
.suspend = langwell_udc_suspend,
.resume = langwell_udc_resume,
.shutdown = langwell_udc_shutdown,
};
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
static int __init init(void)
{
#ifdef OTG_TRANSCEIVER
return langwell_register_peripheral(&langwell_pci_driver);
#else
return pci_register_driver(&langwell_pci_driver);
#endif
}
module_init(init);
static void __exit cleanup(void)
{
#ifdef OTG_TRANSCEIVER
return langwell_unregister_peripheral(&langwell_pci_driver);
#else
pci_unregister_driver(&langwell_pci_driver);
#endif
}
module_exit(cleanup);
Reference in a new issue View git blame Copy permalink