linux/arch/arm/mach-omap1/board-h2.c

470 lines
11 KiB
C

/*
* linux/arch/arm/mach-omap1/board-h2.c
*
* Board specific inits for OMAP-1610 H2
*
* Copyright (C) 2001 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
*
* Copyright (C) 2002 MontaVista Software, Inc.
*
* Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
* Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
*
* H2 specific changes and cleanup
* Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/flash.h>
#include "board-h2.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_3),
KEY(0, 3, KEY_F10),
KEY(0, 4, KEY_F5),
KEY(0, 5, KEY_9),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_2),
KEY(1, 3, KEY_F9),
KEY(1, 4, KEY_F7),
KEY(1, 5, KEY_0),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_6),
KEY(2, 2, KEY_1),
KEY(2, 3, KEY_F2),
KEY(2, 4, KEY_F6),
KEY(2, 5, KEY_HOME),
KEY(3, 0, KEY_8),
KEY(3, 1, KEY_5),
KEY(3, 2, KEY_F12),
KEY(3, 3, KEY_F3),
KEY(3, 4, KEY_F8),
KEY(3, 5, KEY_END),
KEY(4, 0, KEY_7),
KEY(4, 1, KEY_4),
KEY(4, 2, KEY_F11),
KEY(4, 3, KEY_F1),
KEY(4, 4, KEY_F4),
KEY(4, 5, KEY_ESC),
KEY(5, 0, KEY_F13),
KEY(5, 1, KEY_F14),
KEY(5, 2, KEY_F15),
KEY(5, 3, KEY_F16),
KEY(5, 4, KEY_SLEEP),
0
};
static struct mtd_partition h2_nor_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data h2_nor_data = {
.width = 2,
.set_vpp = omap1_set_vpp,
.parts = h2_nor_partitions,
.nr_parts = ARRAY_SIZE(h2_nor_partitions),
};
static struct resource h2_nor_resource = {
/* This is on CS3, wherever it's mapped */
.flags = IORESOURCE_MEM,
};
static struct platform_device h2_nor_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &h2_nor_data,
},
.num_resources = 1,
.resource = &h2_nor_resource,
};
static struct mtd_partition h2_nand_partitions[] = {
#if 0
/* REVISIT: enable these partitions if you make NAND BOOT
* work on your H2 (rev C or newer); published versions of
* x-load only support P2 and H3.
*/
{
.name = "xloader",
.offset = 0,
.size = 64 * 1024,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "bootloader",
.offset = MTDPART_OFS_APPEND,
.size = 256 * 1024,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = 192 * 1024,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 2 * SZ_1M,
},
#endif
{
.name = "filesystem",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
};
static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
unsigned long mask;
if (cmd == NAND_CMD_NONE)
return;
mask = (ctrl & NAND_CLE) ? 0x02 : 0;
if (ctrl & NAND_ALE)
mask |= 0x04;
writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
}
#define H2_NAND_RB_GPIO_PIN 62
static int h2_nand_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(H2_NAND_RB_GPIO_PIN);
}
static const char *h2_part_probes[] = { "cmdlinepart", NULL };
struct platform_nand_data h2_nand_platdata = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.nr_partitions = ARRAY_SIZE(h2_nand_partitions),
.partitions = h2_nand_partitions,
.options = NAND_SAMSUNG_LP_OPTIONS,
.part_probe_types = h2_part_probes,
},
.ctrl = {
.cmd_ctrl = h2_nand_cmd_ctl,
.dev_ready = h2_nand_dev_ready,
},
};
static struct resource h2_nand_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device h2_nand_device = {
.name = "gen_nand",
.id = 0,
.dev = {
.platform_data = &h2_nand_platdata,
},
.num_resources = 1,
.resource = &h2_nand_resource,
};
static struct smc91x_platdata h2_smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct resource h2_smc91x_resources[] = {
[0] = {
.start = OMAP1610_ETHR_START, /* Physical */
.end = OMAP1610_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
static struct platform_device h2_smc91x_device = {
.name = "smc91x",
.id = 0,
.dev = {
.platform_data = &h2_smc91x_info,
},
.num_resources = ARRAY_SIZE(h2_smc91x_resources),
.resource = h2_smc91x_resources,
};
static struct resource h2_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data h2_kp_data = {
.rows = 8,
.cols = 8,
.keymap = h2_keymap,
.keymapsize = ARRAY_SIZE(h2_keymap),
.rep = 1,
.delay = 9,
.dbounce = 1,
};
static struct platform_device h2_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &h2_kp_data,
},
.num_resources = ARRAY_SIZE(h2_kp_resources),
.resource = h2_kp_resources,
};
#define H2_IRDA_FIRSEL_GPIO_PIN 17
static struct omap_irda_config h2_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
.rx_channel = OMAP_DMA_UART3_RX,
.tx_channel = OMAP_DMA_UART3_TX,
.dest_start = UART3_THR,
.src_start = UART3_RHR,
.tx_trigger = 0,
.rx_trigger = 0,
};
static struct resource h2_irda_resources[] = {
[0] = {
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
static u64 irda_dmamask = 0xffffffff;
static struct platform_device h2_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h2_irda_data,
.dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h2_irda_resources),
.resource = h2_irda_resources,
};
static struct platform_device h2_lcd_device = {
.name = "lcd_h2",
.id = -1,
};
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
&h2_lcd_device,
};
static void __init h2_init_smc91x(void)
{
if (gpio_request(0, "SMC91x irq") < 0) {
printk("Error requesting gpio 0 for smc91x irq\n");
return;
}
}
static int tps_setup(struct i2c_client *client, void *context)
{
tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
return 0;
}
static struct tps65010_board tps_board = {
.base = H2_TPS_GPIO_BASE,
.outmask = 0x0f,
.setup = tps_setup,
};
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
.irq = OMAP_GPIO_IRQ(58),
.platform_data = &tps_board,
}, {
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.irq = OMAP_GPIO_IRQ(2),
},
};
static void __init h2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h2_init_smc91x();
}
static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
#ifdef CONFIG_USB_GADGET_OMAP
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
.hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
#endif
.pins[1] = 3,
};
static struct omap_lcd_config h2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_LCD, &h2_lcd_config },
};
static void __init h2_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
* notice whether a NAND chip is enabled at probe time.
*
* FIXME revC boards (and H3) support NAND-boot, with a dip switch to
* put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try
* detecting that in code here, to avoid probing every possible flash
* configuration...
*/
h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
h2_nor_resource.end += SZ_32M - 1;
h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
h2_nand_resource.end += SZ_4K - 1;
if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
gpio_direction_input(H2_NAND_RB_GPIO_PIN);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
/* MMC: card detect and WP */
/* omap_cfg_reg(U19_ARMIO1); */ /* CD */
omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
/* Mux pins for keypad */
omap_cfg_reg(F18_1610_KBC0);
omap_cfg_reg(D20_1610_KBC1);
omap_cfg_reg(D19_1610_KBC2);
omap_cfg_reg(E18_1610_KBC3);
omap_cfg_reg(C21_1610_KBC4);
omap_cfg_reg(G18_1610_KBR0);
omap_cfg_reg(F19_1610_KBR1);
omap_cfg_reg(H14_1610_KBR2);
omap_cfg_reg(E20_1610_KBR3);
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
omap1_usb_init(&h2_usb_config);
h2_mmc_init();
}
static void __init h2_map_io(void)
{
omap1_map_common_io();
}
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = h2_map_io,
.reserve = omap_reserve,
.init_irq = h2_init_irq,
.init_machine = h2_init,
.timer = &omap_timer,
MACHINE_END