linux/drivers/video/mb862xx/mb862xx_reg.h
Anatolij Gustschin f64d8a5fde video: mb862xxfb: add support for L1 displaying
Allow displaying L1 video data on top of the primary L0 layer.
The L1 layer position and dimensions can be configured and the
layer enabled/disabled by using the appropriate L1 controls
added by this patch.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-05-24 16:28:52 +02:00

188 lines
5.4 KiB
C

/*
* Fujitsu MB862xx Graphics Controller Registers/Bits
*/
#ifndef _MB862XX_REG_H
#define _MB862XX_REG_H
#define MB862XX_MMIO_BASE 0x01fc0000
#define MB862XX_MMIO_HIGH_BASE 0x03fc0000
#define MB862XX_I2C_BASE 0x0000c000
#define MB862XX_DISP_BASE 0x00010000
#define MB862XX_CAP_BASE 0x00018000
#define MB862XX_DRAW_BASE 0x00030000
#define MB862XX_GEO_BASE 0x00038000
#define MB862XX_PIO_BASE 0x00038000
#define MB862XX_MMIO_SIZE 0x40000
/* Host interface/pio registers */
#define GC_IST 0x00000020
#define GC_IMASK 0x00000024
#define GC_SRST 0x0000002c
#define GC_CCF 0x00000038
#define GC_RSW 0x0000005c
#define GC_CID 0x000000f0
#define GC_REVISION 0x00000084
#define GC_CCF_CGE_100 0x00000000
#define GC_CCF_CGE_133 0x00040000
#define GC_CCF_CGE_166 0x00080000
#define GC_CCF_COT_100 0x00000000
#define GC_CCF_COT_133 0x00010000
#define GC_CID_CNAME_MSK 0x0000ff00
#define GC_CID_VERSION_MSK 0x000000ff
/* define enabled interrupts hereby */
#define GC_INT_EN 0x00000000
/* Memory interface mode register */
#define GC_MMR 0x0000fffc
/* Display Controller registers */
#define GC_DCM0 0x00000000
#define GC_HTP 0x00000004
#define GC_HDB_HDP 0x00000008
#define GC_VSW_HSW_HSP 0x0000000c
#define GC_VTR 0x00000010
#define GC_VDP_VSP 0x00000014
#define GC_WY_WX 0x00000018
#define GC_WH_WW 0x0000001c
#define GC_L0M 0x00000020
#define GC_L0OA0 0x00000024
#define GC_L0DA0 0x00000028
#define GC_L0DY_L0DX 0x0000002c
#define GC_L1M 0x00000030
#define GC_L1DA 0x00000034
#define GC_DCM1 0x00000100
#define GC_L0EM 0x00000110
#define GC_L0WY_L0WX 0x00000114
#define GC_L0WH_L0WW 0x00000118
#define GC_L1EM 0x00000120
#define GC_L1WY_L1WX 0x00000124
#define GC_L1WH_L1WW 0x00000128
#define GC_DLS 0x00000180
#define GC_DCM2 0x00000104
#define GC_DCM3 0x00000108
#define GC_CPM_CUTC 0x000000a0
#define GC_CUOA0 0x000000a4
#define GC_CUY0_CUX0 0x000000a8
#define GC_CUOA1 0x000000ac
#define GC_CUY1_CUX1 0x000000b0
#define GC_L0PAL0 0x00000400
#define GC_CPM_CEN0 0x00100000
#define GC_CPM_CEN1 0x00200000
#define GC_DCM1_DEN 0x80000000
#define GC_DCM1_L1E 0x00020000
#define GC_L1M_16 0x80000000
#define GC_L1M_YC 0x40000000
#define GC_L1M_CS 0x20000000
#define GC_DCM01_ESY 0x00000004
#define GC_DCM01_SC 0x00003f00
#define GC_DCM01_RESV 0x00004000
#define GC_DCM01_CKS 0x00008000
#define GC_DCM01_L0E 0x00010000
#define GC_DCM01_DEN 0x80000000
#define GC_L0M_L0C_8 0x00000000
#define GC_L0M_L0C_16 0x80000000
#define GC_L0EM_L0EC_24 0x40000000
#define GC_L0M_L0W_UNIT 64
#define GC_L1EM_DM 0x02000000
#define GC_DISP_REFCLK_400 400
/* I2C */
#define GC_I2C_BSR 0x00000000 /* BSR */
#define GC_I2C_BCR 0x00000004 /* BCR */
#define GC_I2C_CCR 0x00000008 /* CCR */
#define GC_I2C_ADR 0x0000000C /* ADR */
#define GC_I2C_DAR 0x00000010 /* DAR */
#define I2C_DISABLE 0x00000000
#define I2C_STOP 0x00000000
#define I2C_START 0x00000010
#define I2C_REPEATED_START 0x00000030
#define I2C_CLOCK_AND_ENABLE 0x0000003f
#define I2C_READY 0x01
#define I2C_INT 0x01
#define I2C_INTE 0x02
#define I2C_ACK 0x08
#define I2C_BER 0x80
#define I2C_BEIE 0x40
#define I2C_TRX 0x80
#define I2C_LRB 0x10
/* Capture registers and bits */
#define GC_CAP_VCM 0x00000000
#define GC_CAP_CSC 0x00000004
#define GC_CAP_VCS 0x00000008
#define GC_CAP_CBM 0x00000010
#define GC_CAP_CBOA 0x00000014
#define GC_CAP_CBLA 0x00000018
#define GC_CAP_IMG_START 0x0000001C
#define GC_CAP_IMG_END 0x00000020
#define GC_CAP_CMSS 0x00000048
#define GC_CAP_CMDS 0x0000004C
#define GC_VCM_VIE 0x80000000
#define GC_VCM_CM 0x03000000
#define GC_VCM_VS_PAL 0x00000002
#define GC_CBM_OO 0x80000000
#define GC_CBM_HRV 0x00000010
#define GC_CBM_CBST 0x00000001
/* Carmine specific */
#define MB86297_DRAW_BASE 0x00020000
#define MB86297_DISP0_BASE 0x00100000
#define MB86297_DISP1_BASE 0x00140000
#define MB86297_WRBACK_BASE 0x00180000
#define MB86297_CAP0_BASE 0x00200000
#define MB86297_CAP1_BASE 0x00280000
#define MB86297_DRAMCTRL_BASE 0x00300000
#define MB86297_CTRL_BASE 0x00400000
#define MB86297_I2C_BASE 0x00500000
#define GC_CTRL_STATUS 0x00000000
#define GC_CTRL_INT_MASK 0x00000004
#define GC_CTRL_CLK_ENABLE 0x0000000c
#define GC_CTRL_SOFT_RST 0x00000010
#define GC_CTRL_CLK_EN_DRAM 0x00000001
#define GC_CTRL_CLK_EN_2D3D 0x00000002
#define GC_CTRL_CLK_EN_DISP0 0x00000020
#define GC_CTRL_CLK_EN_DISP1 0x00000040
#define GC_2D3D_REV 0x000004b4
#define GC_RE_REVISION 0x24240200
/* define enabled interrupts hereby */
#define GC_CARMINE_INT_EN 0x00000004
/* DRAM controller */
#define GC_DCTL_MODE_ADD 0x00000000
#define GC_DCTL_SETTIME1_EMODE 0x00000004
#define GC_DCTL_REFRESH_SETTIME2 0x00000008
#define GC_DCTL_RSV0_STATES 0x0000000C
#define GC_DCTL_RSV2_RSV1 0x00000010
#define GC_DCTL_DDRIF2_DDRIF1 0x00000014
#define GC_DCTL_IOCONT1_IOCONT0 0x00000024
#define GC_DCTL_STATES_MSK 0x0000000f
#define GC_DCTL_INIT_WAIT_CNT 3000
#define GC_DCTL_INIT_WAIT_INTERVAL 1
/* DRAM ctrl values for Carmine PCI Eval. board */
#define GC_EVB_DCTL_MODE_ADD 0x012105c3
#define GC_EVB_DCTL_MODE_ADD_AFT_RST 0x002105c3
#define GC_EVB_DCTL_SETTIME1_EMODE 0x47498000
#define GC_EVB_DCTL_REFRESH_SETTIME2 0x00422a22
#define GC_EVB_DCTL_RSV0_STATES 0x00200003
#define GC_EVB_DCTL_RSV0_STATES_AFT_RST 0x00200002
#define GC_EVB_DCTL_RSV2_RSV1 0x0000000f
#define GC_EVB_DCTL_DDRIF2_DDRIF1 0x00556646
#define GC_EVB_DCTL_IOCONT1_IOCONT0 0x05550555
#define GC_DISP_REFCLK_533 533
#endif