linux/drivers/ide/opti621.c
Andi Kleen e6b53703b9 sections: fix section conflicts in drivers/ide
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:04:41 +09:00

178 lines
4.5 KiB
C

/*
* Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
*/
/*
* Authors:
* Jaromir Koutek <miri@punknet.cz>,
* Jan Harkes <jaharkes@cwi.nl>,
* Mark Lord <mlord@pobox.com>
* Some parts of code are from ali14xx.c and from rz1000.c.
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <asm/io.h>
#define DRV_NAME "opti621"
#define READ_REG 0 /* index of Read cycle timing register */
#define WRITE_REG 1 /* index of Write cycle timing register */
#define CNTRL_REG 3 /* index of Control register */
#define STRAP_REG 5 /* index of Strap register */
#define MISC_REG 6 /* index of Miscellaneous register */
static int reg_base;
static DEFINE_SPINLOCK(opti621_lock);
/* Write value to register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
* This is from setupvic.exe program.
*/
static void write_reg(u8 value, int reg)
{
inw(reg_base + 1);
inw(reg_base + 1);
outb(3, reg_base + 2);
outb(value, reg_base + reg);
outb(0x83, reg_base + 2);
}
/* Read value from register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
* This is from setupvic.exe program.
*/
static u8 read_reg(int reg)
{
u8 ret = 0;
inw(reg_base + 1);
inw(reg_base + 1);
outb(3, reg_base + 2);
ret = inb(reg_base + reg);
outb(0x83, reg_base + 2);
return ret;
}
static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
ide_drive_t *pair = ide_get_pair_dev(drive);
unsigned long flags;
unsigned long mode = drive->pio_mode, pair_mode;
const u8 pio = mode - XFER_PIO_0;
u8 tim, misc, addr_pio = pio, clk;
/* DRDY is default 2 (by OPTi Databook) */
static const u8 addr_timings[2][5] = {
{ 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
{ 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
};
static const u8 data_rec_timings[2][5] = {
{ 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
{ 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
};
ide_set_drivedata(drive, (void *)mode);
if (pair) {
pair_mode = (unsigned long)ide_get_drivedata(pair);
if (pair_mode && pair_mode < mode)
addr_pio = pair_mode - XFER_PIO_0;
}
spin_lock_irqsave(&opti621_lock, flags);
reg_base = hwif->io_ports.data_addr;
/* allow Register-B */
outb(0xc0, reg_base + CNTRL_REG);
/* hmm, setupvic.exe does this ;-) */
outb(0xff, reg_base + 5);
/* if reads 0xff, adapter not exist? */
(void)inb(reg_base + CNTRL_REG);
/* if reads 0xc0, no interface exist? */
read_reg(CNTRL_REG);
/* check CLK speed */
clk = read_reg(STRAP_REG) & 1;
printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
tim = data_rec_timings[clk][pio];
misc = addr_timings[clk][addr_pio];
/* select Index-0/1 for Register-A/B */
write_reg(drive->dn & 1, MISC_REG);
/* set read cycle timings */
write_reg(tim, READ_REG);
/* set write cycle timings */
write_reg(tim, WRITE_REG);
/* use Register-A for drive 0 */
/* use Register-B for drive 1 */
write_reg(0x85, CNTRL_REG);
/* set address setup, DRDY timings, */
/* and read prefetch for both drives */
write_reg(misc, MISC_REG);
spin_unlock_irqrestore(&opti621_lock, flags);
}
static const struct ide_port_ops opti621_port_ops = {
.set_pio_mode = opti621_set_pio_mode,
};
static const struct ide_port_info opti621_chipset __devinitconst = {
.name = DRV_NAME,
.enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
.port_ops = &opti621_port_ops,
.host_flags = IDE_HFLAG_NO_DMA,
.pio_mask = ATA_PIO4,
};
static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &opti621_chipset, NULL);
}
static const struct pci_device_id opti621_pci_tbl[] = {
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
static struct pci_driver opti621_pci_driver = {
.name = "Opti621_IDE",
.id_table = opti621_pci_tbl,
.probe = opti621_init_one,
.remove = ide_pci_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
static int __init opti621_ide_init(void)
{
return ide_pci_register_driver(&opti621_pci_driver);
}
static void __exit opti621_ide_exit(void)
{
pci_unregister_driver(&opti621_pci_driver);
}
module_init(opti621_ide_init);
module_exit(opti621_ide_exit);
MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord");
MODULE_DESCRIPTION("PCI driver module for Opti621 IDE");
MODULE_LICENSE("GPL");