linux/drivers/power/power_supply_sysfs.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

308 lines
7.9 KiB
C

/*
* Sysfs interface for the universal power supply monitor class
*
* Copyright © 2007 David Woodhouse <dwmw2@infradead.org>
* Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
* Copyright © 2004 Szabolcs Gyurko
* Copyright © 2003 Ian Molton <spyro@f2s.com>
*
* Modified: 2004, Oct Szabolcs Gyurko
*
* You may use this code as per GPL version 2
*/
#include <linux/ctype.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
#include "power_supply.h"
/*
* This is because the name "current" breaks the device attr macro.
* The "current" word resolves to "(get_current())" so instead of
* "current" "(get_current())" appears in the sysfs.
*
* The source of this definition is the device.h which calls __ATTR
* macro in sysfs.h which calls the __stringify macro.
*
* Only modification that the name is not tried to be resolved
* (as a macro let's say).
*/
#define POWER_SUPPLY_ATTR(_name) \
{ \
.attr = { .name = #_name, .mode = 0444 }, \
.show = power_supply_show_property, \
.store = NULL, \
}
static struct device_attribute power_supply_attrs[];
static ssize_t power_supply_show_property(struct device *dev,
struct device_attribute *attr,
char *buf) {
static char *status_text[] = {
"Unknown", "Charging", "Discharging", "Not charging", "Full"
};
static char *charge_type[] = {
"Unknown", "N/A", "Trickle", "Fast"
};
static char *health_text[] = {
"Unknown", "Good", "Overheat", "Dead", "Over voltage",
"Unspecified failure", "Cold",
};
static char *technology_text[] = {
"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
"LiMn"
};
static char *capacity_level_text[] = {
"Unknown", "Critical", "Low", "Normal", "High", "Full"
};
ssize_t ret;
struct power_supply *psy = dev_get_drvdata(dev);
const ptrdiff_t off = attr - power_supply_attrs;
union power_supply_propval value;
ret = psy->get_property(psy, off, &value);
if (ret < 0) {
if (ret == -ENODATA)
dev_dbg(dev, "driver has no data for `%s' property\n",
attr->attr.name);
else if (ret != -ENODEV)
dev_err(dev, "driver failed to report `%s' property\n",
attr->attr.name);
return ret;
}
if (off == POWER_SUPPLY_PROP_STATUS)
return sprintf(buf, "%s\n", status_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_CHARGE_TYPE)
return sprintf(buf, "%s\n", charge_type[value.intval]);
else if (off == POWER_SUPPLY_PROP_HEALTH)
return sprintf(buf, "%s\n", health_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_TECHNOLOGY)
return sprintf(buf, "%s\n", technology_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL)
return sprintf(buf, "%s\n", capacity_level_text[value.intval]);
else if (off >= POWER_SUPPLY_PROP_MODEL_NAME)
return sprintf(buf, "%s\n", value.strval);
return sprintf(buf, "%d\n", value.intval);
}
/* Must be in the same order as POWER_SUPPLY_PROP_* */
static struct device_attribute power_supply_attrs[] = {
/* Properties of type `int' */
POWER_SUPPLY_ATTR(status),
POWER_SUPPLY_ATTR(charge_type),
POWER_SUPPLY_ATTR(health),
POWER_SUPPLY_ATTR(present),
POWER_SUPPLY_ATTR(online),
POWER_SUPPLY_ATTR(technology),
POWER_SUPPLY_ATTR(cycle_count),
POWER_SUPPLY_ATTR(voltage_max),
POWER_SUPPLY_ATTR(voltage_min),
POWER_SUPPLY_ATTR(voltage_max_design),
POWER_SUPPLY_ATTR(voltage_min_design),
POWER_SUPPLY_ATTR(voltage_now),
POWER_SUPPLY_ATTR(voltage_avg),
POWER_SUPPLY_ATTR(current_now),
POWER_SUPPLY_ATTR(current_avg),
POWER_SUPPLY_ATTR(power_now),
POWER_SUPPLY_ATTR(power_avg),
POWER_SUPPLY_ATTR(charge_full_design),
POWER_SUPPLY_ATTR(charge_empty_design),
POWER_SUPPLY_ATTR(charge_full),
POWER_SUPPLY_ATTR(charge_empty),
POWER_SUPPLY_ATTR(charge_now),
POWER_SUPPLY_ATTR(charge_avg),
POWER_SUPPLY_ATTR(charge_counter),
POWER_SUPPLY_ATTR(energy_full_design),
POWER_SUPPLY_ATTR(energy_empty_design),
POWER_SUPPLY_ATTR(energy_full),
POWER_SUPPLY_ATTR(energy_empty),
POWER_SUPPLY_ATTR(energy_now),
POWER_SUPPLY_ATTR(energy_avg),
POWER_SUPPLY_ATTR(capacity),
POWER_SUPPLY_ATTR(capacity_level),
POWER_SUPPLY_ATTR(temp),
POWER_SUPPLY_ATTR(temp_ambient),
POWER_SUPPLY_ATTR(time_to_empty_now),
POWER_SUPPLY_ATTR(time_to_empty_avg),
POWER_SUPPLY_ATTR(time_to_full_now),
POWER_SUPPLY_ATTR(time_to_full_avg),
/* Properties of type `const char *' */
POWER_SUPPLY_ATTR(model_name),
POWER_SUPPLY_ATTR(manufacturer),
POWER_SUPPLY_ATTR(serial_number),
};
static ssize_t power_supply_show_static_attrs(struct device *dev,
struct device_attribute *attr,
char *buf) {
static char *type_text[] = { "Battery", "UPS", "Mains", "USB" };
struct power_supply *psy = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", type_text[psy->type]);
}
static struct device_attribute power_supply_static_attrs[] = {
__ATTR(type, 0444, power_supply_show_static_attrs, NULL),
};
int power_supply_create_attrs(struct power_supply *psy)
{
int rc = 0;
int i, j;
for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++) {
rc = device_create_file(psy->dev,
&power_supply_static_attrs[i]);
if (rc)
goto statics_failed;
}
for (j = 0; j < psy->num_properties; j++) {
rc = device_create_file(psy->dev,
&power_supply_attrs[psy->properties[j]]);
if (rc)
goto dynamics_failed;
}
goto succeed;
dynamics_failed:
while (j--)
device_remove_file(psy->dev,
&power_supply_attrs[psy->properties[j]]);
statics_failed:
while (i--)
device_remove_file(psy->dev, &power_supply_static_attrs[i]);
succeed:
return rc;
}
void power_supply_remove_attrs(struct power_supply *psy)
{
int i;
for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++)
device_remove_file(psy->dev, &power_supply_static_attrs[i]);
for (i = 0; i < psy->num_properties; i++)
device_remove_file(psy->dev,
&power_supply_attrs[psy->properties[i]]);
}
static char *kstruprdup(const char *str, gfp_t gfp)
{
char *ret, *ustr;
ustr = ret = kmalloc(strlen(str) + 1, gfp);
if (!ret)
return NULL;
while (*str)
*ustr++ = toupper(*str++);
*ustr = 0;
return ret;
}
int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct power_supply *psy = dev_get_drvdata(dev);
int ret = 0, j;
char *prop_buf;
char *attrname;
dev_dbg(dev, "uevent\n");
if (!psy || !psy->dev) {
dev_dbg(dev, "No power supply yet\n");
return ret;
}
dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->name);
ret = add_uevent_var(env, "POWER_SUPPLY_NAME=%s", psy->name);
if (ret)
return ret;
prop_buf = (char *)get_zeroed_page(GFP_KERNEL);
if (!prop_buf)
return -ENOMEM;
for (j = 0; j < ARRAY_SIZE(power_supply_static_attrs); j++) {
struct device_attribute *attr;
char *line;
attr = &power_supply_static_attrs[j];
ret = power_supply_show_static_attrs(dev, attr, prop_buf);
if (ret < 0)
goto out;
line = strchr(prop_buf, '\n');
if (line)
*line = 0;
attrname = kstruprdup(attr->attr.name, GFP_KERNEL);
if (!attrname) {
ret = -ENOMEM;
goto out;
}
dev_dbg(dev, "Static prop %s=%s\n", attrname, prop_buf);
ret = add_uevent_var(env, "POWER_SUPPLY_%s=%s", attrname, prop_buf);
kfree(attrname);
if (ret)
goto out;
}
dev_dbg(dev, "%zd dynamic props\n", psy->num_properties);
for (j = 0; j < psy->num_properties; j++) {
struct device_attribute *attr;
char *line;
attr = &power_supply_attrs[psy->properties[j]];
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV) {
/* When a battery is absent, we expect -ENODEV. Don't abort;
send the uevent with at least the the PRESENT=0 property */
ret = 0;
continue;
}
if (ret < 0)
goto out;
line = strchr(prop_buf, '\n');
if (line)
*line = 0;
attrname = kstruprdup(attr->attr.name, GFP_KERNEL);
if (!attrname) {
ret = -ENOMEM;
goto out;
}
dev_dbg(dev, "prop %s=%s\n", attrname, prop_buf);
ret = add_uevent_var(env, "POWER_SUPPLY_%s=%s", attrname, prop_buf);
kfree(attrname);
if (ret)
goto out;
}
out:
free_page((unsigned long)prop_buf);
return ret;
}