linux/drivers/acpi/executer/exoparg2.c
Bob Moore b229cf92ee ACPI: ACPICA 20060421
Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)

Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)

Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.

Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)

Defined and deployed a new OSL interface,
acpi_os_validate_address().  This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)

Defined and deployed a new OSL interface,
acpi_os_validate_interface().  This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)

Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)

Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.

The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14 02:30:55 -04:00

597 lines
16 KiB
C

/******************************************************************************
*
* Module Name: exoparg2 - AML execution - opcodes with 2 arguments
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acparser.h>
#include <acpi/acinterp.h>
#include <acpi/acevents.h>
#include <acpi/amlcode.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exoparg2")
/*!
* Naming convention for AML interpreter execution routines.
*
* The routines that begin execution of AML opcodes are named with a common
* convention based upon the number of arguments, the number of target operands,
* and whether or not a value is returned:
*
* AcpiExOpcode_xA_yT_zR
*
* Where:
*
* xA - ARGUMENTS: The number of arguments (input operands) that are
* required for this opcode type (1 through 6 args).
* yT - TARGETS: The number of targets (output operands) that are required
* for this opcode type (0, 1, or 2 targets).
* zR - RETURN VALUE: Indicates whether this opcode type returns a value
* as the function return (0 or 1).
*
* The AcpiExOpcode* functions are called via the Dispatcher component with
* fully resolved operands.
!*/
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_2A_0T_0R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with two arguments, no target, and no return
* value.
*
* ALLOCATION: Deletes both operands
*
******************************************************************************/
acpi_status acpi_ex_opcode_2A_0T_0R(struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
struct acpi_namespace_node *node;
u32 value;
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE_STR(ex_opcode_2A_0T_0R,
acpi_ps_get_opcode_name(walk_state->opcode));
/* Examine the opcode */
switch (walk_state->opcode) {
case AML_NOTIFY_OP: /* Notify (notify_object, notify_value) */
/* The first operand is a namespace node */
node = (struct acpi_namespace_node *)operand[0];
/* Second value is the notify value */
value = (u32) operand[1]->integer.value;
/* Are notifies allowed on this object? */
if (!acpi_ev_is_notify_object(node)) {
ACPI_ERROR((AE_INFO,
"Unexpected notify object type [%s]",
acpi_ut_get_type_name(node->type)));
status = AE_AML_OPERAND_TYPE;
break;
}
#ifdef ACPI_GPE_NOTIFY_CHECK
/*
* GPE method wake/notify check. Here, we want to ensure that we
* don't receive any "DeviceWake" Notifies from a GPE _Lxx or _Exx
* GPE method during system runtime. If we do, the GPE is marked
* as "wake-only" and disabled.
*
* 1) Is the Notify() value == device_wake?
* 2) Is this a GPE deferred method? (An _Lxx or _Exx method)
* 3) Did the original GPE happen at system runtime?
* (versus during wake)
*
* If all three cases are true, this is a wake-only GPE that should
* be disabled at runtime.
*/
if (value == 2) { /* device_wake */
status =
acpi_ev_check_for_wake_only_gpe(walk_state->
gpe_event_info);
if (ACPI_FAILURE(status)) {
/* AE_WAKE_ONLY_GPE only error, means ignore this notify */
return_ACPI_STATUS(AE_OK)
}
}
#endif
/*
* Dispatch the notify to the appropriate handler
* NOTE: the request is queued for execution after this method
* completes. The notify handlers are NOT invoked synchronously
* from this thread -- because handlers may in turn run other
* control methods.
*/
status = acpi_ev_queue_notify_request(node, value);
break;
default:
ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_2A_2T_1R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute a dyadic operator (2 operands) with 2 output targets
* and one implicit return value.
*
******************************************************************************/
acpi_status acpi_ex_opcode_2A_2T_1R(struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc1 = NULL;
union acpi_operand_object *return_desc2 = NULL;
acpi_status status;
ACPI_FUNCTION_TRACE_STR(ex_opcode_2A_2T_1R,
acpi_ps_get_opcode_name(walk_state->opcode));
/* Execute the opcode */
switch (walk_state->opcode) {
case AML_DIVIDE_OP:
/* Divide (Dividend, Divisor, remainder_result quotient_result) */
return_desc1 =
acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
if (!return_desc1) {
status = AE_NO_MEMORY;
goto cleanup;
}
return_desc2 =
acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
if (!return_desc2) {
status = AE_NO_MEMORY;
goto cleanup;
}
/* Quotient to return_desc1, remainder to return_desc2 */
status = acpi_ut_divide(operand[0]->integer.value,
operand[1]->integer.value,
&return_desc1->integer.value,
&return_desc2->integer.value);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
break;
default:
ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
/* Store the results to the target reference operands */
status = acpi_ex_store(return_desc2, operand[2], walk_state);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
status = acpi_ex_store(return_desc1, operand[3], walk_state);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
/* Return the remainder */
walk_state->result_obj = return_desc1;
cleanup:
/*
* Since the remainder is not returned indirectly, remove a reference to
* it. Only the quotient is returned indirectly.
*/
acpi_ut_remove_reference(return_desc2);
if (ACPI_FAILURE(status)) {
/* Delete the return object */
acpi_ut_remove_reference(return_desc1);
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_2A_1T_1R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with two arguments, one target, and a return
* value.
*
******************************************************************************/
acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc = NULL;
acpi_integer index;
acpi_status status = AE_OK;
acpi_size length;
ACPI_FUNCTION_TRACE_STR(ex_opcode_2A_1T_1R,
acpi_ps_get_opcode_name(walk_state->opcode));
/* Execute the opcode */
if (walk_state->op_info->flags & AML_MATH) {
/* All simple math opcodes (add, etc.) */
return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
return_desc->integer.value =
acpi_ex_do_math_op(walk_state->opcode,
operand[0]->integer.value,
operand[1]->integer.value);
goto store_result_to_target;
}
switch (walk_state->opcode) {
case AML_MOD_OP: /* Mod (Dividend, Divisor, remainder_result (ACPI 2.0) */
return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/* return_desc will contain the remainder */
status = acpi_ut_divide(operand[0]->integer.value,
operand[1]->integer.value,
NULL, &return_desc->integer.value);
break;
case AML_CONCAT_OP: /* Concatenate (Data1, Data2, Result) */
status = acpi_ex_do_concatenate(operand[0], operand[1],
&return_desc, walk_state);
break;
case AML_TO_STRING_OP: /* to_string (Buffer, Length, Result) (ACPI 2.0) */
/*
* Input object is guaranteed to be a buffer at this point (it may have
* been converted.) Copy the raw buffer data to a new object of
* type String.
*/
/*
* Get the length of the new string. It is the smallest of:
* 1) Length of the input buffer
* 2) Max length as specified in the to_string operator
* 3) Length of input buffer up to a zero byte (null terminator)
*
* NOTE: A length of zero is ok, and will create a zero-length, null
* terminated string.
*/
length = 0;
while ((length < operand[0]->buffer.length) &&
(length < operand[1]->integer.value) &&
(operand[0]->buffer.pointer[length])) {
length++;
}
/* Allocate a new string object */
return_desc = acpi_ut_create_string_object(length);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/*
* Copy the raw buffer data with no transform.
* (NULL terminated already)
*/
ACPI_MEMCPY(return_desc->string.pointer,
operand[0]->buffer.pointer, length);
break;
case AML_CONCAT_RES_OP:
/* concatenate_res_template (Buffer, Buffer, Result) (ACPI 2.0) */
status = acpi_ex_concat_template(operand[0], operand[1],
&return_desc, walk_state);
break;
case AML_INDEX_OP: /* Index (Source Index Result) */
/* Create the internal return object */
return_desc =
acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_REFERENCE);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/* Initialize the Index reference object */
index = operand[1]->integer.value;
return_desc->reference.offset = (u32) index;
return_desc->reference.opcode = AML_INDEX_OP;
/*
* At this point, the Source operand is a String, Buffer, or Package.
* Verify that the index is within range.
*/
switch (ACPI_GET_OBJECT_TYPE(operand[0])) {
case ACPI_TYPE_STRING:
if (index >= operand[0]->string.length) {
status = AE_AML_STRING_LIMIT;
}
return_desc->reference.target_type =
ACPI_TYPE_BUFFER_FIELD;
break;
case ACPI_TYPE_BUFFER:
if (index >= operand[0]->buffer.length) {
status = AE_AML_BUFFER_LIMIT;
}
return_desc->reference.target_type =
ACPI_TYPE_BUFFER_FIELD;
break;
case ACPI_TYPE_PACKAGE:
if (index >= operand[0]->package.count) {
status = AE_AML_PACKAGE_LIMIT;
}
return_desc->reference.target_type = ACPI_TYPE_PACKAGE;
return_desc->reference.where =
&operand[0]->package.elements[index];
break;
default:
status = AE_AML_INTERNAL;
goto cleanup;
}
/* Failure means that the Index was beyond the end of the object */
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Index (%X%8.8X) is beyond end of object",
ACPI_FORMAT_UINT64(index)));
goto cleanup;
}
/*
* Save the target object and add a reference to it for the life
* of the index
*/
return_desc->reference.object = operand[0];
acpi_ut_add_reference(operand[0]);
/* Store the reference to the Target */
status = acpi_ex_store(return_desc, operand[2], walk_state);
/* Return the reference */
walk_state->result_obj = return_desc;
goto cleanup;
default:
ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
}
store_result_to_target:
if (ACPI_SUCCESS(status)) {
/*
* Store the result of the operation (which is now in return_desc) into
* the Target descriptor.
*/
status = acpi_ex_store(return_desc, operand[2], walk_state);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
if (!walk_state->result_obj) {
walk_state->result_obj = return_desc;
}
}
cleanup:
/* Delete return object on error */
if (ACPI_FAILURE(status)) {
acpi_ut_remove_reference(return_desc);
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_2A_0T_1R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with 2 arguments, no target, and a return value
*
******************************************************************************/
acpi_status acpi_ex_opcode_2A_0T_1R(struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc = NULL;
acpi_status status = AE_OK;
u8 logical_result = FALSE;
ACPI_FUNCTION_TRACE_STR(ex_opcode_2A_0T_1R,
acpi_ps_get_opcode_name(walk_state->opcode));
/* Create the internal return object */
return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/* Execute the Opcode */
if (walk_state->op_info->flags & AML_LOGICAL_NUMERIC) {
/* logical_op (Operand0, Operand1) */
status = acpi_ex_do_logical_numeric_op(walk_state->opcode,
operand[0]->integer.
value,
operand[1]->integer.
value, &logical_result);
goto store_logical_result;
} else if (walk_state->op_info->flags & AML_LOGICAL) {
/* logical_op (Operand0, Operand1) */
status = acpi_ex_do_logical_op(walk_state->opcode, operand[0],
operand[1], &logical_result);
goto store_logical_result;
}
switch (walk_state->opcode) {
case AML_ACQUIRE_OP: /* Acquire (mutex_object, Timeout) */
status =
acpi_ex_acquire_mutex(operand[1], operand[0], walk_state);
if (status == AE_TIME) {
logical_result = TRUE; /* TRUE = Acquire timed out */
status = AE_OK;
}
break;
case AML_WAIT_OP: /* Wait (event_object, Timeout) */
status = acpi_ex_system_wait_event(operand[1], operand[0]);
if (status == AE_TIME) {
logical_result = TRUE; /* TRUE, Wait timed out */
status = AE_OK;
}
break;
default:
ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
store_logical_result:
/*
* Set return value to according to logical_result. logical TRUE (all ones)
* Default is FALSE (zero)
*/
if (logical_result) {
return_desc->integer.value = ACPI_INTEGER_MAX;
}
walk_state->result_obj = return_desc;
cleanup:
/* Delete return object on error */
if (ACPI_FAILURE(status)) {
acpi_ut_remove_reference(return_desc);
}
return_ACPI_STATUS(status);
}