linux/arch/arm/mach-integrator/core.c

258 lines
5.4 KiB
C

/*
* linux/arch/arm/mach-integrator/core.c
*
* Copyright (C) 2000-2003 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/memblock.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/io.h>
#include <linux/clkdev.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/irq.h>
#include <mach/cm.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
static struct amba_pl010_data integrator_uart_data;
static struct amba_device rtc_device = {
.dev = {
.init_name = "mb:15",
},
.res = {
.start = INTEGRATOR_RTC_BASE,
.end = INTEGRATOR_RTC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_RTCINT, NO_IRQ },
};
static struct amba_device uart0_device = {
.dev = {
.init_name = "mb:16",
.platform_data = &integrator_uart_data,
},
.res = {
.start = INTEGRATOR_UART0_BASE,
.end = INTEGRATOR_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_UARTINT0, NO_IRQ },
};
static struct amba_device uart1_device = {
.dev = {
.init_name = "mb:17",
.platform_data = &integrator_uart_data,
},
.res = {
.start = INTEGRATOR_UART1_BASE,
.end = INTEGRATOR_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_UARTINT1, NO_IRQ },
};
static struct amba_device kmi0_device = {
.dev = {
.init_name = "mb:18",
},
.res = {
.start = KMI0_BASE,
.end = KMI0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_KMIINT0, NO_IRQ },
};
static struct amba_device kmi1_device = {
.dev = {
.init_name = "mb:19",
},
.res = {
.start = KMI1_BASE,
.end = KMI1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_KMIINT1, NO_IRQ },
};
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
&uart0_device,
&uart1_device,
&kmi0_device,
&kmi1_device,
};
/*
* These are fixed clocks.
*/
static struct clk clk24mhz = {
.rate = 24000000,
};
static struct clk uartclk = {
.rate = 14745600,
};
static struct clk dummy_apb_pclk;
static struct clk_lookup lookups[] = {
{ /* Bus clock */
.con_id = "apb_pclk",
.clk = &dummy_apb_pclk,
}, {
/* Integrator/AP timer frequency */
.dev_id = "ap_timer",
.clk = &clk24mhz,
}, { /* UART0 */
.dev_id = "mb:16",
.clk = &uartclk,
}, { /* UART1 */
.dev_id = "mb:17",
.clk = &uartclk,
}, { /* KMI0 */
.dev_id = "mb:18",
.clk = &clk24mhz,
}, { /* KMI1 */
.dev_id = "mb:19",
.clk = &clk24mhz,
}, { /* MMCI - IntegratorCP */
.dev_id = "mb:1c",
.clk = &uartclk,
}
};
void __init integrator_init_early(void)
{
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
}
static int __init integrator_init(void)
{
int i;
/*
* The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
* hard-code them. The Integator/CP and forward have proper cell IDs.
* Else we leave them undefined to the bus driver can autoprobe them.
*/
if (machine_is_integrator()) {
rtc_device.periphid = 0x00041030;
uart0_device.periphid = 0x00041010;
uart1_device.periphid = 0x00041010;
kmi0_device.periphid = 0x00041050;
kmi1_device.periphid = 0x00041050;
}
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
return 0;
}
arch_initcall(integrator_init);
/*
* On the Integrator platform, the port RTS and DTR are provided by
* bits in the following SC_CTRLS register bits:
* RTS DTR
* UART0 7 6
* UART1 5 4
*/
#define SC_CTRLC IO_ADDRESS(INTEGRATOR_SC_CTRLC)
#define SC_CTRLS IO_ADDRESS(INTEGRATOR_SC_CTRLS)
static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
{
unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
if (dev == &uart0_device) {
rts_mask = 1 << 4;
dtr_mask = 1 << 5;
} else {
rts_mask = 1 << 6;
dtr_mask = 1 << 7;
}
if (mctrl & TIOCM_RTS)
ctrlc |= rts_mask;
else
ctrls |= rts_mask;
if (mctrl & TIOCM_DTR)
ctrlc |= dtr_mask;
else
ctrls |= dtr_mask;
__raw_writel(ctrls, SC_CTRLS);
__raw_writel(ctrlc, SC_CTRLC);
}
static struct amba_pl010_data integrator_uart_data = {
.set_mctrl = integrator_uart_set_mctrl,
};
#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
static DEFINE_RAW_SPINLOCK(cm_lock);
/**
* cm_control - update the CM_CTRL register.
* @mask: bits to change
* @set: bits to set
*/
void cm_control(u32 mask, u32 set)
{
unsigned long flags;
u32 val;
raw_spin_lock_irqsave(&cm_lock, flags);
val = readl(CM_CTRL) & ~mask;
writel(val | set, CM_CTRL);
raw_spin_unlock_irqrestore(&cm_lock, flags);
}
EXPORT_SYMBOL(cm_control);
/*
* We need to stop things allocating the low memory; ideally we need a
* better implementation of GFP_DMA which does not assume that DMA-able
* memory starts at zero.
*/
void __init integrator_reserve(void)
{
memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
}
/*
* To reset, we hit the on-board reset register in the system FPGA
*/
void integrator_restart(char mode, const char *cmd)
{
cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
}