q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/net/wireless/rt2x00/rt2x00reg.h
Ivo van Doorn feb24691e3 [PATCH] rt2x00: Move TSF sync values into rt2x00config 
All drivers use the same values for TSF sync,
this will move the value determination into rt2x00config.c,
and the definition for the values to rt2x00reg.h

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:12 -07:00

292 lines
7.1 KiB
C
Raw Blame History

/*
Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00
Abstract: rt2x00 generic register information.
*/
#ifndef RT2X00REG_H
#define RT2X00REG_H
/*
* TX result flags.
*/
enum TX_STATUS {
TX_SUCCESS = 0,
TX_SUCCESS_RETRY = 1,
TX_FAIL_RETRY = 2,
TX_FAIL_INVALID = 3,
TX_FAIL_OTHER = 4,
};
/*
* Antenna values
*/
enum antenna {
ANTENNA_SW_DIVERSITY = 0,
ANTENNA_A = 1,
ANTENNA_B = 2,
ANTENNA_HW_DIVERSITY = 3,
};
/*
* Led mode values.
*/
enum led_mode {
LED_MODE_DEFAULT = 0,
LED_MODE_TXRX_ACTIVITY = 1,
LED_MODE_SIGNAL_STRENGTH = 2,
LED_MODE_ASUS = 3,
LED_MODE_ALPHA = 4,
};
/*
* TSF sync values
*/
enum tsf_sync {
TSF_SYNC_NONE = 0,
TSF_SYNC_INFRA = 1,
TSF_SYNC_BEACON = 2,
};
/*
* Device states
*/
enum dev_state {
STATE_DEEP_SLEEP = 0,
STATE_SLEEP = 1,
STATE_STANDBY = 2,
STATE_AWAKE = 3,
/*
* Additional device states, these values are
* not strict since they are not directly passed
* into the device.
*/
STATE_RADIO_ON,
STATE_RADIO_OFF,
STATE_RADIO_RX_ON,
STATE_RADIO_RX_OFF,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
};
/*
* IFS backoff values
*/
enum ifs {
IFS_BACKOFF = 0,
IFS_SIFS = 1,
IFS_NEW_BACKOFF = 2,
IFS_NONE = 3,
};
/*
* Cipher types for hardware encryption
*/
enum cipher {
CIPHER_NONE = 0,
CIPHER_WEP64 = 1,
CIPHER_WEP128 = 2,
CIPHER_TKIP = 3,
CIPHER_AES = 4,
/*
* The following fields were added by rt61pci and rt73usb.
*/
CIPHER_CKIP64 = 5,
CIPHER_CKIP128 = 6,
CIPHER_TKIP_NO_MIC = 7,
};
/*
* Register handlers.
* We store the position of a register field inside a field structure,
* This will simplify the process of setting and reading a certain field
* inside the register while making sure the process remains byte order safe.
*/
struct rt2x00_field8 {
u8 bit_offset;
u8 bit_mask;
};
struct rt2x00_field16 {
u16 bit_offset;
u16 bit_mask;
};
struct rt2x00_field32 {
u32 bit_offset;
u32 bit_mask;
};
/*
* Power of two check, this will check
* if the mask that has been given contains
* and contiguous set of bits.
*/
#define is_power_of_two(x) ( !((x) & ((x)-1)) )
#define low_bit_mask(x) ( ((x)-1) & ~(x) )
#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x))
#define FIELD8(__mask) \
({ \
BUILD_BUG_ON(!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (u8)(__mask)); \
(struct rt2x00_field8) { \
__ffs(__mask), (__mask) \
}; \
})
#define FIELD16(__mask) \
({ \
BUILD_BUG_ON(!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (u16)(__mask));\
(struct rt2x00_field16) { \
__ffs(__mask), (__mask) \
}; \
})
#define FIELD32(__mask) \
({ \
BUILD_BUG_ON(!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (u32)(__mask));\
(struct rt2x00_field32) { \
__ffs(__mask), (__mask) \
}; \
})
static inline void rt2x00_set_field32(u32 *reg,
const struct rt2x00_field32 field,
const u32 value)
{
*reg &= ~(field.bit_mask);
*reg |= (value << field.bit_offset) & field.bit_mask;
}
static inline u32 rt2x00_get_field32(const u32 reg,
const struct rt2x00_field32 field)
{
return (reg & field.bit_mask) >> field.bit_offset;
}
static inline void rt2x00_set_field16(u16 *reg,
const struct rt2x00_field16 field,
const u16 value)
{
*reg &= ~(field.bit_mask);
*reg |= (value << field.bit_offset) & field.bit_mask;
}
static inline u16 rt2x00_get_field16(const u16 reg,
const struct rt2x00_field16 field)
{
return (reg & field.bit_mask) >> field.bit_offset;
}
static inline void rt2x00_set_field8(u8 *reg,
const struct rt2x00_field8 field,
const u8 value)
{
*reg &= ~(field.bit_mask);
*reg |= (value << field.bit_offset) & field.bit_mask;
}
static inline u8 rt2x00_get_field8(const u8 reg,
const struct rt2x00_field8 field)
{
return (reg & field.bit_mask) >> field.bit_offset;
}
/*
* Device specific rate value.
* We will have to create the device specific rate value
* passed to the ieee80211 kernel. We need to make it a consist of
* multiple fields because we want to store more then 1 device specific
* values inside the value.
* 1 - rate, stored as 100 kbit/s.
* 2 - preamble, short_preamble enabled flag.
* 3 - MASK_RATE, which rates are enabled in this mode, this mask
* corresponds with the TX register format for the current device.
* 4 - plcp, 802.11b rates are device specific,
* 802.11g rates are set according to the ieee802.11a-1999 p.14.
* The bit to enable preamble is set in a seperate define.
*/
#define DEV_RATE FIELD32(0x000007ff)
#define DEV_PREAMBLE FIELD32(0x00000800)
#define DEV_RATEMASK FIELD32(0x00fff000)
#define DEV_PLCP FIELD32(0xff000000)
/*
* Bitfields
*/
#define DEV_RATEBIT_1MB ( 1 << 0 )
#define DEV_RATEBIT_2MB ( 1 << 1 )
#define DEV_RATEBIT_5_5MB ( 1 << 2 )
#define DEV_RATEBIT_11MB ( 1 << 3 )
#define DEV_RATEBIT_6MB ( 1 << 4 )
#define DEV_RATEBIT_9MB ( 1 << 5 )
#define DEV_RATEBIT_12MB ( 1 << 6 )
#define DEV_RATEBIT_18MB ( 1 << 7 )
#define DEV_RATEBIT_24MB ( 1 << 8 )
#define DEV_RATEBIT_36MB ( 1 << 9 )
#define DEV_RATEBIT_48MB ( 1 << 10 )
#define DEV_RATEBIT_54MB ( 1 << 11 )
/*
* Bitmasks for DEV_RATEMASK
*/
#define DEV_RATEMASK_1MB ( (DEV_RATEBIT_1MB << 1) -1 )
#define DEV_RATEMASK_2MB ( (DEV_RATEBIT_2MB << 1) -1 )
#define DEV_RATEMASK_5_5MB ( (DEV_RATEBIT_5_5MB << 1) -1 )
#define DEV_RATEMASK_11MB ( (DEV_RATEBIT_11MB << 1) -1 )
#define DEV_RATEMASK_6MB ( (DEV_RATEBIT_6MB << 1) -1 )
#define DEV_RATEMASK_9MB ( (DEV_RATEBIT_9MB << 1) -1 )
#define DEV_RATEMASK_12MB ( (DEV_RATEBIT_12MB << 1) -1 )
#define DEV_RATEMASK_18MB ( (DEV_RATEBIT_18MB << 1) -1 )
#define DEV_RATEMASK_24MB ( (DEV_RATEBIT_24MB << 1) -1 )
#define DEV_RATEMASK_36MB ( (DEV_RATEBIT_36MB << 1) -1 )
#define DEV_RATEMASK_48MB ( (DEV_RATEBIT_48MB << 1) -1 )
#define DEV_RATEMASK_54MB ( (DEV_RATEBIT_54MB << 1) -1 )
/*
* Bitmask groups of bitrates
*/
#define DEV_BASIC_RATEMASK \
( DEV_RATEMASK_11MB | \
DEV_RATEBIT_6MB | DEV_RATEBIT_12MB | DEV_RATEBIT_24MB )
#define DEV_CCK_RATEMASK ( DEV_RATEMASK_11MB )
#define DEV_OFDM_RATEMASK ( DEV_RATEMASK_54MB & ~DEV_CCK_RATEMASK )
/*
* Macro's to set and get specific fields from the device specific val and val2
* fields inside the ieee80211_rate entry.
*/
#define DEVICE_SET_RATE_FIELD(__value, __mask) \
(int)( ((__value) << DEV_##__mask.bit_offset) & DEV_##__mask.bit_mask )
#define DEVICE_GET_RATE_FIELD(__value, __mask) \
(int)( ((__value) & DEV_##__mask.bit_mask) >> DEV_##__mask.bit_offset )
#endif /* RT2X00REG_H */
Reference in a new issue View git blame Copy permalink