b229cf92ee
Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
622 lines
19 KiB
C
622 lines
19 KiB
C
/******************************************************************************
|
|
*
|
|
* Module Name: tbconvrt - ACPI Table conversion utilities
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* Copyright (C) 2000 - 2006, R. Byron Moore
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*/
|
|
|
|
#include <acpi/acpi.h>
|
|
#include <acpi/actables.h>
|
|
|
|
#define _COMPONENT ACPI_TABLES
|
|
ACPI_MODULE_NAME("tbconvrt")
|
|
|
|
/* Local prototypes */
|
|
static void
|
|
acpi_tb_init_generic_address(struct acpi_generic_address *new_gas_struct,
|
|
u8 register_bit_width,
|
|
acpi_physical_address address);
|
|
|
|
static void
|
|
acpi_tb_convert_fadt1(struct fadt_descriptor *local_fadt,
|
|
struct fadt_descriptor_rev1 *original_fadt);
|
|
|
|
static void
|
|
acpi_tb_convert_fadt2(struct fadt_descriptor *local_fadt,
|
|
struct fadt_descriptor *original_fadt);
|
|
|
|
u8 acpi_fadt_is_v1;
|
|
ACPI_EXPORT_SYMBOL(acpi_fadt_is_v1)
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_tb_get_table_count
|
|
*
|
|
* PARAMETERS: RSDP - Pointer to the RSDP
|
|
* RSDT - Pointer to the RSDT/XSDT
|
|
*
|
|
* RETURN: The number of tables pointed to by the RSDT or XSDT.
|
|
*
|
|
* DESCRIPTION: Calculate the number of tables. Automatically handles either
|
|
* an RSDT or XSDT.
|
|
*
|
|
******************************************************************************/
|
|
|
|
u32
|
|
acpi_tb_get_table_count(struct rsdp_descriptor *RSDP,
|
|
struct acpi_table_header *RSDT)
|
|
{
|
|
u32 pointer_size;
|
|
|
|
ACPI_FUNCTION_ENTRY();
|
|
|
|
/* RSDT pointers are 32 bits, XSDT pointers are 64 bits */
|
|
|
|
if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
|
|
pointer_size = sizeof(u32);
|
|
} else {
|
|
pointer_size = sizeof(u64);
|
|
}
|
|
|
|
/*
|
|
* Determine the number of tables pointed to by the RSDT/XSDT.
|
|
* This is defined by the ACPI Specification to be the number of
|
|
* pointers contained within the RSDT/XSDT. The size of the pointers
|
|
* is architecture-dependent.
|
|
*/
|
|
return ((RSDT->length -
|
|
sizeof(struct acpi_table_header)) / pointer_size);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_tb_convert_to_xsdt
|
|
*
|
|
* PARAMETERS: table_info - Info about the RSDT
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Convert an RSDT to an XSDT (internal common format)
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status acpi_tb_convert_to_xsdt(struct acpi_table_desc *table_info)
|
|
{
|
|
acpi_size table_size;
|
|
u32 i;
|
|
struct xsdt_descriptor *new_table;
|
|
|
|
ACPI_FUNCTION_ENTRY();
|
|
|
|
/* Compute size of the converted XSDT */
|
|
|
|
table_size = ((acpi_size) acpi_gbl_rsdt_table_count * sizeof(u64)) +
|
|
sizeof(struct acpi_table_header);
|
|
|
|
/* Allocate an XSDT */
|
|
|
|
new_table = ACPI_ALLOCATE_ZEROED(table_size);
|
|
if (!new_table) {
|
|
return (AE_NO_MEMORY);
|
|
}
|
|
|
|
/* Copy the header and set the length */
|
|
|
|
ACPI_MEMCPY(new_table, table_info->pointer,
|
|
sizeof(struct acpi_table_header));
|
|
new_table->length = (u32) table_size;
|
|
|
|
/* Copy the table pointers */
|
|
|
|
for (i = 0; i < acpi_gbl_rsdt_table_count; i++) {
|
|
|
|
/* RSDT pointers are 32 bits, XSDT pointers are 64 bits */
|
|
|
|
if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
|
|
ACPI_STORE_ADDRESS(new_table->table_offset_entry[i],
|
|
(ACPI_CAST_PTR
|
|
(struct rsdt_descriptor,
|
|
table_info->pointer))->
|
|
table_offset_entry[i]);
|
|
} else {
|
|
new_table->table_offset_entry[i] =
|
|
(ACPI_CAST_PTR(struct xsdt_descriptor,
|
|
table_info->pointer))->
|
|
table_offset_entry[i];
|
|
}
|
|
}
|
|
|
|
/* Delete the original table (either mapped or in a buffer) */
|
|
|
|
acpi_tb_delete_single_table(table_info);
|
|
|
|
/* Point the table descriptor to the new table */
|
|
|
|
table_info->pointer =
|
|
ACPI_CAST_PTR(struct acpi_table_header, new_table);
|
|
table_info->length = table_size;
|
|
table_info->allocation = ACPI_MEM_ALLOCATED;
|
|
|
|
return (AE_OK);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_tb_init_generic_address
|
|
*
|
|
* PARAMETERS: new_gas_struct - GAS struct to be initialized
|
|
* register_bit_width - Width of this register
|
|
* Address - Address of the register
|
|
*
|
|
* RETURN: None
|
|
*
|
|
* DESCRIPTION: Initialize a GAS structure.
|
|
*
|
|
******************************************************************************/
|
|
|
|
static void
|
|
acpi_tb_init_generic_address(struct acpi_generic_address *new_gas_struct,
|
|
u8 register_bit_width,
|
|
acpi_physical_address address)
|
|
{
|
|
|
|
ACPI_STORE_ADDRESS(new_gas_struct->address, address);
|
|
|
|
new_gas_struct->address_space_id = ACPI_ADR_SPACE_SYSTEM_IO;
|
|
new_gas_struct->register_bit_width = register_bit_width;
|
|
new_gas_struct->register_bit_offset = 0;
|
|
new_gas_struct->access_width = 0;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_tb_convert_fadt1
|
|
*
|
|
* PARAMETERS: local_fadt - Pointer to new FADT
|
|
* original_fadt - Pointer to old FADT
|
|
*
|
|
* RETURN: None, populates local_fadt
|
|
*
|
|
* DESCRIPTION: Convert an ACPI 1.0 FADT to common internal format
|
|
*
|
|
******************************************************************************/
|
|
|
|
static void
|
|
acpi_tb_convert_fadt1(struct fadt_descriptor *local_fadt,
|
|
struct fadt_descriptor_rev1 *original_fadt)
|
|
{
|
|
|
|
/* ACPI 1.0 FACS */
|
|
/* The BIOS stored FADT should agree with Revision 1.0 */
|
|
acpi_fadt_is_v1 = 1;
|
|
|
|
/*
|
|
* Copy the table header and the common part of the tables.
|
|
*
|
|
* The 2.0 table is an extension of the 1.0 table, so the entire 1.0
|
|
* table can be copied first, then expand some fields to 64 bits.
|
|
*/
|
|
ACPI_MEMCPY(local_fadt, original_fadt,
|
|
sizeof(struct fadt_descriptor_rev1));
|
|
|
|
/* Convert table pointers to 64-bit fields */
|
|
|
|
ACPI_STORE_ADDRESS(local_fadt->xfirmware_ctrl,
|
|
local_fadt->V1_firmware_ctrl);
|
|
ACPI_STORE_ADDRESS(local_fadt->Xdsdt, local_fadt->V1_dsdt);
|
|
|
|
/*
|
|
* System Interrupt Model isn't used in ACPI 2.0
|
|
* (local_fadt->Reserved1 = 0;)
|
|
*/
|
|
|
|
/*
|
|
* This field is set by the OEM to convey the preferred power management
|
|
* profile to OSPM. It doesn't have any 1.0 equivalence. Since we don't
|
|
* know what kind of 32-bit system this is, we will use "unspecified".
|
|
*/
|
|
local_fadt->prefer_PM_profile = PM_UNSPECIFIED;
|
|
|
|
/*
|
|
* Processor Performance State Control. This is the value OSPM writes to
|
|
* the SMI_CMD register to assume processor performance state control
|
|
* responsibility. There isn't any equivalence in 1.0, but as many 1.x
|
|
* ACPI tables contain _PCT and _PSS we also keep this value, unless
|
|
* acpi_strict is set.
|
|
*/
|
|
if (acpi_strict)
|
|
local_fadt->pstate_cnt = 0;
|
|
|
|
/*
|
|
* Support for the _CST object and C States change notification.
|
|
* This data item hasn't any 1.0 equivalence so leave it zero.
|
|
*/
|
|
local_fadt->cst_cnt = 0;
|
|
|
|
/*
|
|
* FADT Rev 2 was an interim FADT released between ACPI 1.0 and ACPI 2.0.
|
|
* It primarily adds the FADT reset mechanism.
|
|
*/
|
|
if ((original_fadt->revision == 2) &&
|
|
(original_fadt->length ==
|
|
sizeof(struct fadt_descriptor_rev2_minus))) {
|
|
/*
|
|
* Grab the entire generic address struct, plus the 1-byte reset value
|
|
* that immediately follows.
|
|
*/
|
|
ACPI_MEMCPY(&local_fadt->reset_register,
|
|
&(ACPI_CAST_PTR(struct fadt_descriptor_rev2_minus,
|
|
original_fadt))->reset_register,
|
|
sizeof(struct acpi_generic_address) + 1);
|
|
} else {
|
|
/*
|
|
* Since there isn't any equivalence in 1.0 and since it is highly
|
|
* likely that a 1.0 system has legacy support.
|
|
*/
|
|
local_fadt->iapc_boot_arch = BAF_LEGACY_DEVICES;
|
|
}
|
|
|
|
/*
|
|
* Convert the V1.0 block addresses to V2.0 GAS structures
|
|
*/
|
|
acpi_tb_init_generic_address(&local_fadt->xpm1a_evt_blk,
|
|
local_fadt->pm1_evt_len,
|
|
(acpi_physical_address) local_fadt->
|
|
V1_pm1a_evt_blk);
|
|
acpi_tb_init_generic_address(&local_fadt->xpm1b_evt_blk,
|
|
local_fadt->pm1_evt_len,
|
|
(acpi_physical_address) local_fadt->
|
|
V1_pm1b_evt_blk);
|
|
acpi_tb_init_generic_address(&local_fadt->xpm1a_cnt_blk,
|
|
local_fadt->pm1_cnt_len,
|
|
(acpi_physical_address) local_fadt->
|
|
V1_pm1a_cnt_blk);
|
|
acpi_tb_init_generic_address(&local_fadt->xpm1b_cnt_blk,
|
|
local_fadt->pm1_cnt_len,
|
|
(acpi_physical_address) local_fadt->
|
|
V1_pm1b_cnt_blk);
|
|
acpi_tb_init_generic_address(&local_fadt->xpm2_cnt_blk,
|
|
local_fadt->pm2_cnt_len,
|
|
(acpi_physical_address) local_fadt->
|
|
V1_pm2_cnt_blk);
|
|
acpi_tb_init_generic_address(&local_fadt->xpm_tmr_blk,
|
|
local_fadt->pm_tm_len,
|
|
(acpi_physical_address) local_fadt->
|
|
V1_pm_tmr_blk);
|
|
acpi_tb_init_generic_address(&local_fadt->xgpe0_blk, 0,
|
|
(acpi_physical_address) local_fadt->
|
|
V1_gpe0_blk);
|
|
acpi_tb_init_generic_address(&local_fadt->xgpe1_blk, 0,
|
|
(acpi_physical_address) local_fadt->
|
|
V1_gpe1_blk);
|
|
|
|
/* Create separate GAS structs for the PM1 Enable registers */
|
|
|
|
acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
|
|
(u8) ACPI_DIV_2(acpi_gbl_FADT->
|
|
pm1_evt_len),
|
|
(acpi_physical_address)
|
|
(local_fadt->xpm1a_evt_blk.address +
|
|
ACPI_DIV_2(acpi_gbl_FADT->pm1_evt_len)));
|
|
|
|
/* PM1B is optional; leave null if not present */
|
|
|
|
if (local_fadt->xpm1b_evt_blk.address) {
|
|
acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
|
|
(u8) ACPI_DIV_2(acpi_gbl_FADT->
|
|
pm1_evt_len),
|
|
(acpi_physical_address)
|
|
(local_fadt->xpm1b_evt_blk.
|
|
address +
|
|
ACPI_DIV_2(acpi_gbl_FADT->
|
|
pm1_evt_len)));
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_tb_convert_fadt2
|
|
*
|
|
* PARAMETERS: local_fadt - Pointer to new FADT
|
|
* original_fadt - Pointer to old FADT
|
|
*
|
|
* RETURN: None, populates local_fadt
|
|
*
|
|
* DESCRIPTION: Convert an ACPI 2.0 FADT to common internal format.
|
|
* Handles optional "X" fields.
|
|
*
|
|
******************************************************************************/
|
|
|
|
static void
|
|
acpi_tb_convert_fadt2(struct fadt_descriptor *local_fadt,
|
|
struct fadt_descriptor *original_fadt)
|
|
{
|
|
|
|
/* We have an ACPI 2.0 FADT but we must copy it to our local buffer */
|
|
|
|
ACPI_MEMCPY(local_fadt, original_fadt, sizeof(struct fadt_descriptor));
|
|
|
|
/*
|
|
* "X" fields are optional extensions to the original V1.0 fields, so
|
|
* we must selectively expand V1.0 fields if the corresponding X field
|
|
* is zero.
|
|
*/
|
|
if (!(local_fadt->xfirmware_ctrl)) {
|
|
ACPI_STORE_ADDRESS(local_fadt->xfirmware_ctrl,
|
|
local_fadt->V1_firmware_ctrl);
|
|
}
|
|
|
|
if (!(local_fadt->Xdsdt)) {
|
|
ACPI_STORE_ADDRESS(local_fadt->Xdsdt, local_fadt->V1_dsdt);
|
|
}
|
|
|
|
if (!(local_fadt->xpm1a_evt_blk.address)) {
|
|
acpi_tb_init_generic_address(&local_fadt->xpm1a_evt_blk,
|
|
local_fadt->pm1_evt_len,
|
|
(acpi_physical_address)
|
|
local_fadt->V1_pm1a_evt_blk);
|
|
}
|
|
|
|
if (!(local_fadt->xpm1b_evt_blk.address)) {
|
|
acpi_tb_init_generic_address(&local_fadt->xpm1b_evt_blk,
|
|
local_fadt->pm1_evt_len,
|
|
(acpi_physical_address)
|
|
local_fadt->V1_pm1b_evt_blk);
|
|
}
|
|
|
|
if (!(local_fadt->xpm1a_cnt_blk.address)) {
|
|
acpi_tb_init_generic_address(&local_fadt->xpm1a_cnt_blk,
|
|
local_fadt->pm1_cnt_len,
|
|
(acpi_physical_address)
|
|
local_fadt->V1_pm1a_cnt_blk);
|
|
}
|
|
|
|
if (!(local_fadt->xpm1b_cnt_blk.address)) {
|
|
acpi_tb_init_generic_address(&local_fadt->xpm1b_cnt_blk,
|
|
local_fadt->pm1_cnt_len,
|
|
(acpi_physical_address)
|
|
local_fadt->V1_pm1b_cnt_blk);
|
|
}
|
|
|
|
if (!(local_fadt->xpm2_cnt_blk.address)) {
|
|
acpi_tb_init_generic_address(&local_fadt->xpm2_cnt_blk,
|
|
local_fadt->pm2_cnt_len,
|
|
(acpi_physical_address)
|
|
local_fadt->V1_pm2_cnt_blk);
|
|
}
|
|
|
|
if (!(local_fadt->xpm_tmr_blk.address)) {
|
|
acpi_tb_init_generic_address(&local_fadt->xpm_tmr_blk,
|
|
local_fadt->pm_tm_len,
|
|
(acpi_physical_address)
|
|
local_fadt->V1_pm_tmr_blk);
|
|
}
|
|
|
|
if (!(local_fadt->xgpe0_blk.address)) {
|
|
acpi_tb_init_generic_address(&local_fadt->xgpe0_blk,
|
|
0,
|
|
(acpi_physical_address)
|
|
local_fadt->V1_gpe0_blk);
|
|
}
|
|
|
|
if (!(local_fadt->xgpe1_blk.address)) {
|
|
acpi_tb_init_generic_address(&local_fadt->xgpe1_blk,
|
|
0,
|
|
(acpi_physical_address)
|
|
local_fadt->V1_gpe1_blk);
|
|
}
|
|
|
|
/* Create separate GAS structs for the PM1 Enable registers */
|
|
|
|
acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
|
|
(u8) ACPI_DIV_2(acpi_gbl_FADT->
|
|
pm1_evt_len),
|
|
(acpi_physical_address)
|
|
(local_fadt->xpm1a_evt_blk.address +
|
|
ACPI_DIV_2(acpi_gbl_FADT->pm1_evt_len)));
|
|
|
|
acpi_gbl_xpm1a_enable.address_space_id =
|
|
local_fadt->xpm1a_evt_blk.address_space_id;
|
|
|
|
/* PM1B is optional; leave null if not present */
|
|
|
|
if (local_fadt->xpm1b_evt_blk.address) {
|
|
acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
|
|
(u8) ACPI_DIV_2(acpi_gbl_FADT->
|
|
pm1_evt_len),
|
|
(acpi_physical_address)
|
|
(local_fadt->xpm1b_evt_blk.
|
|
address +
|
|
ACPI_DIV_2(acpi_gbl_FADT->
|
|
pm1_evt_len)));
|
|
|
|
acpi_gbl_xpm1b_enable.address_space_id =
|
|
local_fadt->xpm1b_evt_blk.address_space_id;
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_tb_convert_table_fadt
|
|
*
|
|
* PARAMETERS: None
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Converts a BIOS supplied ACPI 1.0 FADT to a local
|
|
* ACPI 2.0 FADT. If the BIOS supplied a 2.0 FADT then it is simply
|
|
* copied to the local FADT. The ACPI CA software uses this
|
|
* local FADT. Thus a significant amount of special #ifdef
|
|
* type codeing is saved.
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status acpi_tb_convert_table_fadt(void)
|
|
{
|
|
struct fadt_descriptor *local_fadt;
|
|
struct acpi_table_desc *table_desc;
|
|
|
|
ACPI_FUNCTION_TRACE(tb_convert_table_fadt);
|
|
|
|
/*
|
|
* acpi_gbl_FADT is valid. Validate the FADT length. The table must be
|
|
* at least as long as the version 1.0 FADT
|
|
*/
|
|
if (acpi_gbl_FADT->length < sizeof(struct fadt_descriptor_rev1)) {
|
|
ACPI_ERROR((AE_INFO, "FADT is invalid, too short: 0x%X",
|
|
acpi_gbl_FADT->length));
|
|
return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
|
|
}
|
|
|
|
/* Allocate buffer for the ACPI 2.0(+) FADT */
|
|
|
|
local_fadt = ACPI_ALLOCATE_ZEROED(sizeof(struct fadt_descriptor));
|
|
if (!local_fadt) {
|
|
return_ACPI_STATUS(AE_NO_MEMORY);
|
|
}
|
|
|
|
if (acpi_gbl_FADT->revision >= FADT2_REVISION_ID) {
|
|
if (acpi_gbl_FADT->length < sizeof(struct fadt_descriptor)) {
|
|
|
|
/* Length is too short to be a V2.0 table */
|
|
|
|
ACPI_WARNING((AE_INFO,
|
|
"Inconsistent FADT length (0x%X) and revision (0x%X), using FADT V1.0 portion of table",
|
|
acpi_gbl_FADT->length,
|
|
acpi_gbl_FADT->revision));
|
|
|
|
acpi_tb_convert_fadt1(local_fadt,
|
|
(void *)acpi_gbl_FADT);
|
|
} else {
|
|
/* Valid V2.0 table */
|
|
|
|
acpi_tb_convert_fadt2(local_fadt, acpi_gbl_FADT);
|
|
}
|
|
} else {
|
|
/* Valid V1.0 table */
|
|
|
|
acpi_tb_convert_fadt1(local_fadt, (void *)acpi_gbl_FADT);
|
|
}
|
|
|
|
/* Global FADT pointer will point to the new common V2.0 FADT */
|
|
|
|
acpi_gbl_FADT = local_fadt;
|
|
acpi_gbl_FADT->length = sizeof(struct fadt_descriptor);
|
|
|
|
/* Free the original table */
|
|
|
|
table_desc = acpi_gbl_table_lists[ACPI_TABLE_ID_FADT].next;
|
|
acpi_tb_delete_single_table(table_desc);
|
|
|
|
/* Install the new table */
|
|
|
|
table_desc->pointer =
|
|
ACPI_CAST_PTR(struct acpi_table_header, acpi_gbl_FADT);
|
|
table_desc->allocation = ACPI_MEM_ALLOCATED;
|
|
table_desc->length = sizeof(struct fadt_descriptor);
|
|
|
|
/* Dump the entire FADT */
|
|
|
|
ACPI_DEBUG_PRINT((ACPI_DB_TABLES,
|
|
"Hex dump of common internal FADT, size %d (%X)\n",
|
|
acpi_gbl_FADT->length, acpi_gbl_FADT->length));
|
|
|
|
ACPI_DUMP_BUFFER(ACPI_CAST_PTR(u8, acpi_gbl_FADT),
|
|
acpi_gbl_FADT->length);
|
|
|
|
return_ACPI_STATUS(AE_OK);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FUNCTION: acpi_tb_build_common_facs
|
|
*
|
|
* PARAMETERS: table_info - Info for currently installed FACS
|
|
*
|
|
* RETURN: Status
|
|
*
|
|
* DESCRIPTION: Convert ACPI 1.0 and ACPI 2.0 FACS to a common internal
|
|
* table format.
|
|
*
|
|
******************************************************************************/
|
|
|
|
acpi_status acpi_tb_build_common_facs(struct acpi_table_desc *table_info)
|
|
{
|
|
|
|
ACPI_FUNCTION_TRACE(tb_build_common_facs);
|
|
|
|
/* Absolute minimum length is 24, but the ACPI spec says 64 */
|
|
|
|
if (acpi_gbl_FACS->length < 24) {
|
|
ACPI_ERROR((AE_INFO, "Invalid FACS table length: 0x%X",
|
|
acpi_gbl_FACS->length));
|
|
return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
|
|
}
|
|
|
|
if (acpi_gbl_FACS->length < 64) {
|
|
ACPI_WARNING((AE_INFO,
|
|
"FACS is shorter than the ACPI specification allows: 0x%X, using anyway",
|
|
acpi_gbl_FACS->length));
|
|
}
|
|
|
|
/* Copy fields to the new FACS */
|
|
|
|
acpi_gbl_common_fACS.global_lock = &(acpi_gbl_FACS->global_lock);
|
|
|
|
if ((acpi_gbl_RSDP->revision < 2) ||
|
|
(acpi_gbl_FACS->length < 32) ||
|
|
(!(acpi_gbl_FACS->xfirmware_waking_vector))) {
|
|
|
|
/* ACPI 1.0 FACS or short table or optional X_ field is zero */
|
|
|
|
acpi_gbl_common_fACS.firmware_waking_vector = ACPI_CAST_PTR(u64,
|
|
&
|
|
(acpi_gbl_FACS->
|
|
firmware_waking_vector));
|
|
acpi_gbl_common_fACS.vector_width = 32;
|
|
} else {
|
|
/* ACPI 2.0 FACS with valid X_ field */
|
|
|
|
acpi_gbl_common_fACS.firmware_waking_vector =
|
|
&acpi_gbl_FACS->xfirmware_waking_vector;
|
|
acpi_gbl_common_fACS.vector_width = 64;
|
|
}
|
|
|
|
return_ACPI_STATUS(AE_OK);
|
|
}
|