6435909199
Based on the original patch from Stephen Hemminger. Convert to new LED control infrastucture and remove no longer necessary bits. CC: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
1926 lines
53 KiB
C
1926 lines
53 KiB
C
/*******************************************************************************
|
|
|
|
Intel PRO/1000 Linux driver
|
|
Copyright(c) 1999 - 2006 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
Linux NICS <linux.nics@intel.com>
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
/* ethtool support for e1000 */
|
|
|
|
#include "e1000.h"
|
|
#include <asm/uaccess.h>
|
|
|
|
enum {NETDEV_STATS, E1000_STATS};
|
|
|
|
struct e1000_stats {
|
|
char stat_string[ETH_GSTRING_LEN];
|
|
int type;
|
|
int sizeof_stat;
|
|
int stat_offset;
|
|
};
|
|
|
|
#define E1000_STAT(m) E1000_STATS, \
|
|
sizeof(((struct e1000_adapter *)0)->m), \
|
|
offsetof(struct e1000_adapter, m)
|
|
#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
|
|
sizeof(((struct net_device *)0)->m), \
|
|
offsetof(struct net_device, m)
|
|
|
|
static const struct e1000_stats e1000_gstrings_stats[] = {
|
|
{ "rx_packets", E1000_STAT(stats.gprc) },
|
|
{ "tx_packets", E1000_STAT(stats.gptc) },
|
|
{ "rx_bytes", E1000_STAT(stats.gorcl) },
|
|
{ "tx_bytes", E1000_STAT(stats.gotcl) },
|
|
{ "rx_broadcast", E1000_STAT(stats.bprc) },
|
|
{ "tx_broadcast", E1000_STAT(stats.bptc) },
|
|
{ "rx_multicast", E1000_STAT(stats.mprc) },
|
|
{ "tx_multicast", E1000_STAT(stats.mptc) },
|
|
{ "rx_errors", E1000_STAT(stats.rxerrc) },
|
|
{ "tx_errors", E1000_STAT(stats.txerrc) },
|
|
{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
|
|
{ "multicast", E1000_STAT(stats.mprc) },
|
|
{ "collisions", E1000_STAT(stats.colc) },
|
|
{ "rx_length_errors", E1000_STAT(stats.rlerrc) },
|
|
{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
|
|
{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
|
|
{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
|
|
{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
|
|
{ "rx_missed_errors", E1000_STAT(stats.mpc) },
|
|
{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
|
|
{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
|
|
{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
|
|
{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
|
|
{ "tx_window_errors", E1000_STAT(stats.latecol) },
|
|
{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
|
|
{ "tx_deferred_ok", E1000_STAT(stats.dc) },
|
|
{ "tx_single_coll_ok", E1000_STAT(stats.scc) },
|
|
{ "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
|
|
{ "tx_timeout_count", E1000_STAT(tx_timeout_count) },
|
|
{ "tx_restart_queue", E1000_STAT(restart_queue) },
|
|
{ "rx_long_length_errors", E1000_STAT(stats.roc) },
|
|
{ "rx_short_length_errors", E1000_STAT(stats.ruc) },
|
|
{ "rx_align_errors", E1000_STAT(stats.algnerrc) },
|
|
{ "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
|
|
{ "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
|
|
{ "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
|
|
{ "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
|
|
{ "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
|
|
{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
|
|
{ "rx_long_byte_count", E1000_STAT(stats.gorcl) },
|
|
{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
|
|
{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
|
|
{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
|
|
{ "tx_smbus", E1000_STAT(stats.mgptc) },
|
|
{ "rx_smbus", E1000_STAT(stats.mgprc) },
|
|
{ "dropped_smbus", E1000_STAT(stats.mgpdc) },
|
|
};
|
|
|
|
#define E1000_QUEUE_STATS_LEN 0
|
|
#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
|
|
#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
|
|
static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
|
|
"Register test (offline)", "Eeprom test (offline)",
|
|
"Interrupt test (offline)", "Loopback test (offline)",
|
|
"Link test (on/offline)"
|
|
};
|
|
#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
|
|
|
|
static int e1000_get_settings(struct net_device *netdev,
|
|
struct ethtool_cmd *ecmd)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
if (hw->media_type == e1000_media_type_copper) {
|
|
|
|
ecmd->supported = (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Full|
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_TP);
|
|
ecmd->advertising = ADVERTISED_TP;
|
|
|
|
if (hw->autoneg == 1) {
|
|
ecmd->advertising |= ADVERTISED_Autoneg;
|
|
/* the e1000 autoneg seems to match ethtool nicely */
|
|
ecmd->advertising |= hw->autoneg_advertised;
|
|
}
|
|
|
|
ecmd->port = PORT_TP;
|
|
ecmd->phy_address = hw->phy_addr;
|
|
|
|
if (hw->mac_type == e1000_82543)
|
|
ecmd->transceiver = XCVR_EXTERNAL;
|
|
else
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
|
|
} else {
|
|
ecmd->supported = (SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Autoneg);
|
|
|
|
ecmd->advertising = (ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_FIBRE |
|
|
ADVERTISED_Autoneg);
|
|
|
|
ecmd->port = PORT_FIBRE;
|
|
|
|
if (hw->mac_type >= e1000_82545)
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
else
|
|
ecmd->transceiver = XCVR_EXTERNAL;
|
|
}
|
|
|
|
if (er32(STATUS) & E1000_STATUS_LU) {
|
|
|
|
e1000_get_speed_and_duplex(hw, &adapter->link_speed,
|
|
&adapter->link_duplex);
|
|
ethtool_cmd_speed_set(ecmd, adapter->link_speed);
|
|
|
|
/* unfortunately FULL_DUPLEX != DUPLEX_FULL
|
|
* and HALF_DUPLEX != DUPLEX_HALF */
|
|
|
|
if (adapter->link_duplex == FULL_DUPLEX)
|
|
ecmd->duplex = DUPLEX_FULL;
|
|
else
|
|
ecmd->duplex = DUPLEX_HALF;
|
|
} else {
|
|
ethtool_cmd_speed_set(ecmd, -1);
|
|
ecmd->duplex = -1;
|
|
}
|
|
|
|
ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
|
|
hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_settings(struct net_device *netdev,
|
|
struct ethtool_cmd *ecmd)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
|
|
msleep(1);
|
|
|
|
if (ecmd->autoneg == AUTONEG_ENABLE) {
|
|
hw->autoneg = 1;
|
|
if (hw->media_type == e1000_media_type_fiber)
|
|
hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_FIBRE |
|
|
ADVERTISED_Autoneg;
|
|
else
|
|
hw->autoneg_advertised = ecmd->advertising |
|
|
ADVERTISED_TP |
|
|
ADVERTISED_Autoneg;
|
|
ecmd->advertising = hw->autoneg_advertised;
|
|
} else {
|
|
u32 speed = ethtool_cmd_speed(ecmd);
|
|
if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
|
|
clear_bit(__E1000_RESETTING, &adapter->flags);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* reset the link */
|
|
|
|
if (netif_running(adapter->netdev)) {
|
|
e1000_down(adapter);
|
|
e1000_up(adapter);
|
|
} else
|
|
e1000_reset(adapter);
|
|
|
|
clear_bit(__E1000_RESETTING, &adapter->flags);
|
|
return 0;
|
|
}
|
|
|
|
static u32 e1000_get_link(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
|
|
/*
|
|
* If the link is not reported up to netdev, interrupts are disabled,
|
|
* and so the physical link state may have changed since we last
|
|
* looked. Set get_link_status to make sure that the true link
|
|
* state is interrogated, rather than pulling a cached and possibly
|
|
* stale link state from the driver.
|
|
*/
|
|
if (!netif_carrier_ok(netdev))
|
|
adapter->hw.get_link_status = 1;
|
|
|
|
return e1000_has_link(adapter);
|
|
}
|
|
|
|
static void e1000_get_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
pause->autoneg =
|
|
(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
|
|
|
|
if (hw->fc == E1000_FC_RX_PAUSE)
|
|
pause->rx_pause = 1;
|
|
else if (hw->fc == E1000_FC_TX_PAUSE)
|
|
pause->tx_pause = 1;
|
|
else if (hw->fc == E1000_FC_FULL) {
|
|
pause->rx_pause = 1;
|
|
pause->tx_pause = 1;
|
|
}
|
|
}
|
|
|
|
static int e1000_set_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
int retval = 0;
|
|
|
|
adapter->fc_autoneg = pause->autoneg;
|
|
|
|
while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
|
|
msleep(1);
|
|
|
|
if (pause->rx_pause && pause->tx_pause)
|
|
hw->fc = E1000_FC_FULL;
|
|
else if (pause->rx_pause && !pause->tx_pause)
|
|
hw->fc = E1000_FC_RX_PAUSE;
|
|
else if (!pause->rx_pause && pause->tx_pause)
|
|
hw->fc = E1000_FC_TX_PAUSE;
|
|
else if (!pause->rx_pause && !pause->tx_pause)
|
|
hw->fc = E1000_FC_NONE;
|
|
|
|
hw->original_fc = hw->fc;
|
|
|
|
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
|
|
if (netif_running(adapter->netdev)) {
|
|
e1000_down(adapter);
|
|
e1000_up(adapter);
|
|
} else
|
|
e1000_reset(adapter);
|
|
} else
|
|
retval = ((hw->media_type == e1000_media_type_fiber) ?
|
|
e1000_setup_link(hw) : e1000_force_mac_fc(hw));
|
|
|
|
clear_bit(__E1000_RESETTING, &adapter->flags);
|
|
return retval;
|
|
}
|
|
|
|
static u32 e1000_get_rx_csum(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
return adapter->rx_csum;
|
|
}
|
|
|
|
static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
adapter->rx_csum = data;
|
|
|
|
if (netif_running(netdev))
|
|
e1000_reinit_locked(adapter);
|
|
else
|
|
e1000_reset(adapter);
|
|
return 0;
|
|
}
|
|
|
|
static u32 e1000_get_tx_csum(struct net_device *netdev)
|
|
{
|
|
return (netdev->features & NETIF_F_HW_CSUM) != 0;
|
|
}
|
|
|
|
static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
if (hw->mac_type < e1000_82543) {
|
|
if (!data)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
if (data)
|
|
netdev->features |= NETIF_F_HW_CSUM;
|
|
else
|
|
netdev->features &= ~NETIF_F_HW_CSUM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_tso(struct net_device *netdev, u32 data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
if ((hw->mac_type < e1000_82544) ||
|
|
(hw->mac_type == e1000_82547))
|
|
return data ? -EINVAL : 0;
|
|
|
|
if (data)
|
|
netdev->features |= NETIF_F_TSO;
|
|
else
|
|
netdev->features &= ~NETIF_F_TSO;
|
|
|
|
netdev->features &= ~NETIF_F_TSO6;
|
|
|
|
e_info(probe, "TSO is %s\n", data ? "Enabled" : "Disabled");
|
|
adapter->tso_force = true;
|
|
return 0;
|
|
}
|
|
|
|
static u32 e1000_get_msglevel(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
return adapter->msg_enable;
|
|
}
|
|
|
|
static void e1000_set_msglevel(struct net_device *netdev, u32 data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
adapter->msg_enable = data;
|
|
}
|
|
|
|
static int e1000_get_regs_len(struct net_device *netdev)
|
|
{
|
|
#define E1000_REGS_LEN 32
|
|
return E1000_REGS_LEN * sizeof(u32);
|
|
}
|
|
|
|
static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
|
|
void *p)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 *regs_buff = p;
|
|
u16 phy_data;
|
|
|
|
memset(p, 0, E1000_REGS_LEN * sizeof(u32));
|
|
|
|
regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
|
|
|
|
regs_buff[0] = er32(CTRL);
|
|
regs_buff[1] = er32(STATUS);
|
|
|
|
regs_buff[2] = er32(RCTL);
|
|
regs_buff[3] = er32(RDLEN);
|
|
regs_buff[4] = er32(RDH);
|
|
regs_buff[5] = er32(RDT);
|
|
regs_buff[6] = er32(RDTR);
|
|
|
|
regs_buff[7] = er32(TCTL);
|
|
regs_buff[8] = er32(TDLEN);
|
|
regs_buff[9] = er32(TDH);
|
|
regs_buff[10] = er32(TDT);
|
|
regs_buff[11] = er32(TIDV);
|
|
|
|
regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */
|
|
if (hw->phy_type == e1000_phy_igp) {
|
|
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
|
|
IGP01E1000_PHY_AGC_A);
|
|
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
|
|
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
|
|
regs_buff[13] = (u32)phy_data; /* cable length */
|
|
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
|
|
IGP01E1000_PHY_AGC_B);
|
|
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
|
|
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
|
|
regs_buff[14] = (u32)phy_data; /* cable length */
|
|
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
|
|
IGP01E1000_PHY_AGC_C);
|
|
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
|
|
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
|
|
regs_buff[15] = (u32)phy_data; /* cable length */
|
|
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
|
|
IGP01E1000_PHY_AGC_D);
|
|
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
|
|
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
|
|
regs_buff[16] = (u32)phy_data; /* cable length */
|
|
regs_buff[17] = 0; /* extended 10bt distance (not needed) */
|
|
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
|
|
e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
|
|
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
|
|
regs_buff[18] = (u32)phy_data; /* cable polarity */
|
|
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
|
|
IGP01E1000_PHY_PCS_INIT_REG);
|
|
e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
|
|
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
|
|
regs_buff[19] = (u32)phy_data; /* cable polarity */
|
|
regs_buff[20] = 0; /* polarity correction enabled (always) */
|
|
regs_buff[22] = 0; /* phy receive errors (unavailable) */
|
|
regs_buff[23] = regs_buff[18]; /* mdix mode */
|
|
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
|
|
} else {
|
|
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
|
|
regs_buff[13] = (u32)phy_data; /* cable length */
|
|
regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
|
regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
|
regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
|
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
|
|
regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
|
|
regs_buff[18] = regs_buff[13]; /* cable polarity */
|
|
regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
|
regs_buff[20] = regs_buff[17]; /* polarity correction */
|
|
/* phy receive errors */
|
|
regs_buff[22] = adapter->phy_stats.receive_errors;
|
|
regs_buff[23] = regs_buff[13]; /* mdix mode */
|
|
}
|
|
regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
|
|
e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
|
|
regs_buff[24] = (u32)phy_data; /* phy local receiver status */
|
|
regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
|
|
if (hw->mac_type >= e1000_82540 &&
|
|
hw->media_type == e1000_media_type_copper) {
|
|
regs_buff[26] = er32(MANC);
|
|
}
|
|
}
|
|
|
|
static int e1000_get_eeprom_len(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
return hw->eeprom.word_size * 2;
|
|
}
|
|
|
|
static int e1000_get_eeprom(struct net_device *netdev,
|
|
struct ethtool_eeprom *eeprom, u8 *bytes)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u16 *eeprom_buff;
|
|
int first_word, last_word;
|
|
int ret_val = 0;
|
|
u16 i;
|
|
|
|
if (eeprom->len == 0)
|
|
return -EINVAL;
|
|
|
|
eeprom->magic = hw->vendor_id | (hw->device_id << 16);
|
|
|
|
first_word = eeprom->offset >> 1;
|
|
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
|
|
|
|
eeprom_buff = kmalloc(sizeof(u16) *
|
|
(last_word - first_word + 1), GFP_KERNEL);
|
|
if (!eeprom_buff)
|
|
return -ENOMEM;
|
|
|
|
if (hw->eeprom.type == e1000_eeprom_spi)
|
|
ret_val = e1000_read_eeprom(hw, first_word,
|
|
last_word - first_word + 1,
|
|
eeprom_buff);
|
|
else {
|
|
for (i = 0; i < last_word - first_word + 1; i++) {
|
|
ret_val = e1000_read_eeprom(hw, first_word + i, 1,
|
|
&eeprom_buff[i]);
|
|
if (ret_val)
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Device's eeprom is always little-endian, word addressable */
|
|
for (i = 0; i < last_word - first_word + 1; i++)
|
|
le16_to_cpus(&eeprom_buff[i]);
|
|
|
|
memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
|
|
eeprom->len);
|
|
kfree(eeprom_buff);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int e1000_set_eeprom(struct net_device *netdev,
|
|
struct ethtool_eeprom *eeprom, u8 *bytes)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u16 *eeprom_buff;
|
|
void *ptr;
|
|
int max_len, first_word, last_word, ret_val = 0;
|
|
u16 i;
|
|
|
|
if (eeprom->len == 0)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
|
|
return -EFAULT;
|
|
|
|
max_len = hw->eeprom.word_size * 2;
|
|
|
|
first_word = eeprom->offset >> 1;
|
|
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
|
|
eeprom_buff = kmalloc(max_len, GFP_KERNEL);
|
|
if (!eeprom_buff)
|
|
return -ENOMEM;
|
|
|
|
ptr = (void *)eeprom_buff;
|
|
|
|
if (eeprom->offset & 1) {
|
|
/* need read/modify/write of first changed EEPROM word */
|
|
/* only the second byte of the word is being modified */
|
|
ret_val = e1000_read_eeprom(hw, first_word, 1,
|
|
&eeprom_buff[0]);
|
|
ptr++;
|
|
}
|
|
if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
|
|
/* need read/modify/write of last changed EEPROM word */
|
|
/* only the first byte of the word is being modified */
|
|
ret_val = e1000_read_eeprom(hw, last_word, 1,
|
|
&eeprom_buff[last_word - first_word]);
|
|
}
|
|
|
|
/* Device's eeprom is always little-endian, word addressable */
|
|
for (i = 0; i < last_word - first_word + 1; i++)
|
|
le16_to_cpus(&eeprom_buff[i]);
|
|
|
|
memcpy(ptr, bytes, eeprom->len);
|
|
|
|
for (i = 0; i < last_word - first_word + 1; i++)
|
|
eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
|
|
|
|
ret_val = e1000_write_eeprom(hw, first_word,
|
|
last_word - first_word + 1, eeprom_buff);
|
|
|
|
/* Update the checksum over the first part of the EEPROM if needed */
|
|
if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG))
|
|
e1000_update_eeprom_checksum(hw);
|
|
|
|
kfree(eeprom_buff);
|
|
return ret_val;
|
|
}
|
|
|
|
static void e1000_get_drvinfo(struct net_device *netdev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
char firmware_version[32];
|
|
|
|
strncpy(drvinfo->driver, e1000_driver_name, 32);
|
|
strncpy(drvinfo->version, e1000_driver_version, 32);
|
|
|
|
sprintf(firmware_version, "N/A");
|
|
strncpy(drvinfo->fw_version, firmware_version, 32);
|
|
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
|
|
drvinfo->regdump_len = e1000_get_regs_len(netdev);
|
|
drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
|
|
}
|
|
|
|
static void e1000_get_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ring)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
e1000_mac_type mac_type = hw->mac_type;
|
|
struct e1000_tx_ring *txdr = adapter->tx_ring;
|
|
struct e1000_rx_ring *rxdr = adapter->rx_ring;
|
|
|
|
ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
|
|
E1000_MAX_82544_RXD;
|
|
ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
|
|
E1000_MAX_82544_TXD;
|
|
ring->rx_mini_max_pending = 0;
|
|
ring->rx_jumbo_max_pending = 0;
|
|
ring->rx_pending = rxdr->count;
|
|
ring->tx_pending = txdr->count;
|
|
ring->rx_mini_pending = 0;
|
|
ring->rx_jumbo_pending = 0;
|
|
}
|
|
|
|
static int e1000_set_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ring)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
e1000_mac_type mac_type = hw->mac_type;
|
|
struct e1000_tx_ring *txdr, *tx_old;
|
|
struct e1000_rx_ring *rxdr, *rx_old;
|
|
int i, err;
|
|
|
|
if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
|
|
return -EINVAL;
|
|
|
|
while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
|
|
msleep(1);
|
|
|
|
if (netif_running(adapter->netdev))
|
|
e1000_down(adapter);
|
|
|
|
tx_old = adapter->tx_ring;
|
|
rx_old = adapter->rx_ring;
|
|
|
|
err = -ENOMEM;
|
|
txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL);
|
|
if (!txdr)
|
|
goto err_alloc_tx;
|
|
|
|
rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL);
|
|
if (!rxdr)
|
|
goto err_alloc_rx;
|
|
|
|
adapter->tx_ring = txdr;
|
|
adapter->rx_ring = rxdr;
|
|
|
|
rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD);
|
|
rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ?
|
|
E1000_MAX_RXD : E1000_MAX_82544_RXD));
|
|
rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
|
|
|
|
txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD);
|
|
txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ?
|
|
E1000_MAX_TXD : E1000_MAX_82544_TXD));
|
|
txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++)
|
|
txdr[i].count = txdr->count;
|
|
for (i = 0; i < adapter->num_rx_queues; i++)
|
|
rxdr[i].count = rxdr->count;
|
|
|
|
if (netif_running(adapter->netdev)) {
|
|
/* Try to get new resources before deleting old */
|
|
err = e1000_setup_all_rx_resources(adapter);
|
|
if (err)
|
|
goto err_setup_rx;
|
|
err = e1000_setup_all_tx_resources(adapter);
|
|
if (err)
|
|
goto err_setup_tx;
|
|
|
|
/* save the new, restore the old in order to free it,
|
|
* then restore the new back again */
|
|
|
|
adapter->rx_ring = rx_old;
|
|
adapter->tx_ring = tx_old;
|
|
e1000_free_all_rx_resources(adapter);
|
|
e1000_free_all_tx_resources(adapter);
|
|
kfree(tx_old);
|
|
kfree(rx_old);
|
|
adapter->rx_ring = rxdr;
|
|
adapter->tx_ring = txdr;
|
|
err = e1000_up(adapter);
|
|
if (err)
|
|
goto err_setup;
|
|
}
|
|
|
|
clear_bit(__E1000_RESETTING, &adapter->flags);
|
|
return 0;
|
|
err_setup_tx:
|
|
e1000_free_all_rx_resources(adapter);
|
|
err_setup_rx:
|
|
adapter->rx_ring = rx_old;
|
|
adapter->tx_ring = tx_old;
|
|
kfree(rxdr);
|
|
err_alloc_rx:
|
|
kfree(txdr);
|
|
err_alloc_tx:
|
|
e1000_up(adapter);
|
|
err_setup:
|
|
clear_bit(__E1000_RESETTING, &adapter->flags);
|
|
return err;
|
|
}
|
|
|
|
static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
|
|
u32 mask, u32 write)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
static const u32 test[] =
|
|
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
|
|
u8 __iomem *address = hw->hw_addr + reg;
|
|
u32 read;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(test); i++) {
|
|
writel(write & test[i], address);
|
|
read = readl(address);
|
|
if (read != (write & test[i] & mask)) {
|
|
e_err(drv, "pattern test reg %04X failed: "
|
|
"got 0x%08X expected 0x%08X\n",
|
|
reg, read, (write & test[i] & mask));
|
|
*data = reg;
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
|
|
u32 mask, u32 write)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u8 __iomem *address = hw->hw_addr + reg;
|
|
u32 read;
|
|
|
|
writel(write & mask, address);
|
|
read = readl(address);
|
|
if ((read & mask) != (write & mask)) {
|
|
e_err(drv, "set/check reg %04X test failed: "
|
|
"got 0x%08X expected 0x%08X\n",
|
|
reg, (read & mask), (write & mask));
|
|
*data = reg;
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
#define REG_PATTERN_TEST(reg, mask, write) \
|
|
do { \
|
|
if (reg_pattern_test(adapter, data, \
|
|
(hw->mac_type >= e1000_82543) \
|
|
? E1000_##reg : E1000_82542_##reg, \
|
|
mask, write)) \
|
|
return 1; \
|
|
} while (0)
|
|
|
|
#define REG_SET_AND_CHECK(reg, mask, write) \
|
|
do { \
|
|
if (reg_set_and_check(adapter, data, \
|
|
(hw->mac_type >= e1000_82543) \
|
|
? E1000_##reg : E1000_82542_##reg, \
|
|
mask, write)) \
|
|
return 1; \
|
|
} while (0)
|
|
|
|
static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
u32 value, before, after;
|
|
u32 i, toggle;
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
/* The status register is Read Only, so a write should fail.
|
|
* Some bits that get toggled are ignored.
|
|
*/
|
|
|
|
/* there are several bits on newer hardware that are r/w */
|
|
toggle = 0xFFFFF833;
|
|
|
|
before = er32(STATUS);
|
|
value = (er32(STATUS) & toggle);
|
|
ew32(STATUS, toggle);
|
|
after = er32(STATUS) & toggle;
|
|
if (value != after) {
|
|
e_err(drv, "failed STATUS register test got: "
|
|
"0x%08X expected: 0x%08X\n", after, value);
|
|
*data = 1;
|
|
return 1;
|
|
}
|
|
/* restore previous status */
|
|
ew32(STATUS, before);
|
|
|
|
REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
|
|
|
|
REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
|
|
REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
|
|
REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
|
|
REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
|
|
|
|
REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
|
|
|
|
before = 0x06DFB3FE;
|
|
REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
|
|
REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
|
|
|
|
if (hw->mac_type >= e1000_82543) {
|
|
|
|
REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
|
|
value = E1000_RAR_ENTRIES;
|
|
for (i = 0; i < value; i++) {
|
|
REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
|
|
0xFFFFFFFF);
|
|
}
|
|
|
|
} else {
|
|
|
|
REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
|
|
REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
|
|
|
|
}
|
|
|
|
value = E1000_MC_TBL_SIZE;
|
|
for (i = 0; i < value; i++)
|
|
REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
|
|
|
|
*data = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u16 temp;
|
|
u16 checksum = 0;
|
|
u16 i;
|
|
|
|
*data = 0;
|
|
/* Read and add up the contents of the EEPROM */
|
|
for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
|
|
if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) {
|
|
*data = 1;
|
|
break;
|
|
}
|
|
checksum += temp;
|
|
}
|
|
|
|
/* If Checksum is not Correct return error else test passed */
|
|
if ((checksum != (u16)EEPROM_SUM) && !(*data))
|
|
*data = 2;
|
|
|
|
return *data;
|
|
}
|
|
|
|
static irqreturn_t e1000_test_intr(int irq, void *data)
|
|
{
|
|
struct net_device *netdev = (struct net_device *)data;
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
adapter->test_icr |= er32(ICR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
u32 mask, i = 0;
|
|
bool shared_int = true;
|
|
u32 irq = adapter->pdev->irq;
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
*data = 0;
|
|
|
|
/* NOTE: we don't test MSI interrupts here, yet */
|
|
/* Hook up test interrupt handler just for this test */
|
|
if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
|
|
netdev))
|
|
shared_int = false;
|
|
else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
|
|
netdev->name, netdev)) {
|
|
*data = 1;
|
|
return -1;
|
|
}
|
|
e_info(hw, "testing %s interrupt\n", (shared_int ?
|
|
"shared" : "unshared"));
|
|
|
|
/* Disable all the interrupts */
|
|
ew32(IMC, 0xFFFFFFFF);
|
|
msleep(10);
|
|
|
|
/* Test each interrupt */
|
|
for (; i < 10; i++) {
|
|
|
|
/* Interrupt to test */
|
|
mask = 1 << i;
|
|
|
|
if (!shared_int) {
|
|
/* Disable the interrupt to be reported in
|
|
* the cause register and then force the same
|
|
* interrupt and see if one gets posted. If
|
|
* an interrupt was posted to the bus, the
|
|
* test failed.
|
|
*/
|
|
adapter->test_icr = 0;
|
|
ew32(IMC, mask);
|
|
ew32(ICS, mask);
|
|
msleep(10);
|
|
|
|
if (adapter->test_icr & mask) {
|
|
*data = 3;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Enable the interrupt to be reported in
|
|
* the cause register and then force the same
|
|
* interrupt and see if one gets posted. If
|
|
* an interrupt was not posted to the bus, the
|
|
* test failed.
|
|
*/
|
|
adapter->test_icr = 0;
|
|
ew32(IMS, mask);
|
|
ew32(ICS, mask);
|
|
msleep(10);
|
|
|
|
if (!(adapter->test_icr & mask)) {
|
|
*data = 4;
|
|
break;
|
|
}
|
|
|
|
if (!shared_int) {
|
|
/* Disable the other interrupts to be reported in
|
|
* the cause register and then force the other
|
|
* interrupts and see if any get posted. If
|
|
* an interrupt was posted to the bus, the
|
|
* test failed.
|
|
*/
|
|
adapter->test_icr = 0;
|
|
ew32(IMC, ~mask & 0x00007FFF);
|
|
ew32(ICS, ~mask & 0x00007FFF);
|
|
msleep(10);
|
|
|
|
if (adapter->test_icr) {
|
|
*data = 5;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Disable all the interrupts */
|
|
ew32(IMC, 0xFFFFFFFF);
|
|
msleep(10);
|
|
|
|
/* Unhook test interrupt handler */
|
|
free_irq(irq, netdev);
|
|
|
|
return *data;
|
|
}
|
|
|
|
static void e1000_free_desc_rings(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
|
|
struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int i;
|
|
|
|
if (txdr->desc && txdr->buffer_info) {
|
|
for (i = 0; i < txdr->count; i++) {
|
|
if (txdr->buffer_info[i].dma)
|
|
dma_unmap_single(&pdev->dev,
|
|
txdr->buffer_info[i].dma,
|
|
txdr->buffer_info[i].length,
|
|
DMA_TO_DEVICE);
|
|
if (txdr->buffer_info[i].skb)
|
|
dev_kfree_skb(txdr->buffer_info[i].skb);
|
|
}
|
|
}
|
|
|
|
if (rxdr->desc && rxdr->buffer_info) {
|
|
for (i = 0; i < rxdr->count; i++) {
|
|
if (rxdr->buffer_info[i].dma)
|
|
dma_unmap_single(&pdev->dev,
|
|
rxdr->buffer_info[i].dma,
|
|
rxdr->buffer_info[i].length,
|
|
DMA_FROM_DEVICE);
|
|
if (rxdr->buffer_info[i].skb)
|
|
dev_kfree_skb(rxdr->buffer_info[i].skb);
|
|
}
|
|
}
|
|
|
|
if (txdr->desc) {
|
|
dma_free_coherent(&pdev->dev, txdr->size, txdr->desc,
|
|
txdr->dma);
|
|
txdr->desc = NULL;
|
|
}
|
|
if (rxdr->desc) {
|
|
dma_free_coherent(&pdev->dev, rxdr->size, rxdr->desc,
|
|
rxdr->dma);
|
|
rxdr->desc = NULL;
|
|
}
|
|
|
|
kfree(txdr->buffer_info);
|
|
txdr->buffer_info = NULL;
|
|
kfree(rxdr->buffer_info);
|
|
rxdr->buffer_info = NULL;
|
|
}
|
|
|
|
static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
|
|
struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
u32 rctl;
|
|
int i, ret_val;
|
|
|
|
/* Setup Tx descriptor ring and Tx buffers */
|
|
|
|
if (!txdr->count)
|
|
txdr->count = E1000_DEFAULT_TXD;
|
|
|
|
txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
|
|
GFP_KERNEL);
|
|
if (!txdr->buffer_info) {
|
|
ret_val = 1;
|
|
goto err_nomem;
|
|
}
|
|
|
|
txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
|
|
txdr->size = ALIGN(txdr->size, 4096);
|
|
txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
|
|
GFP_KERNEL);
|
|
if (!txdr->desc) {
|
|
ret_val = 2;
|
|
goto err_nomem;
|
|
}
|
|
memset(txdr->desc, 0, txdr->size);
|
|
txdr->next_to_use = txdr->next_to_clean = 0;
|
|
|
|
ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
|
|
ew32(TDBAH, ((u64)txdr->dma >> 32));
|
|
ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
|
|
ew32(TDH, 0);
|
|
ew32(TDT, 0);
|
|
ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN |
|
|
E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
|
|
E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
|
|
|
|
for (i = 0; i < txdr->count; i++) {
|
|
struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
|
|
struct sk_buff *skb;
|
|
unsigned int size = 1024;
|
|
|
|
skb = alloc_skb(size, GFP_KERNEL);
|
|
if (!skb) {
|
|
ret_val = 3;
|
|
goto err_nomem;
|
|
}
|
|
skb_put(skb, size);
|
|
txdr->buffer_info[i].skb = skb;
|
|
txdr->buffer_info[i].length = skb->len;
|
|
txdr->buffer_info[i].dma =
|
|
dma_map_single(&pdev->dev, skb->data, skb->len,
|
|
DMA_TO_DEVICE);
|
|
tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
|
|
tx_desc->lower.data = cpu_to_le32(skb->len);
|
|
tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
|
|
E1000_TXD_CMD_IFCS |
|
|
E1000_TXD_CMD_RPS);
|
|
tx_desc->upper.data = 0;
|
|
}
|
|
|
|
/* Setup Rx descriptor ring and Rx buffers */
|
|
|
|
if (!rxdr->count)
|
|
rxdr->count = E1000_DEFAULT_RXD;
|
|
|
|
rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
|
|
GFP_KERNEL);
|
|
if (!rxdr->buffer_info) {
|
|
ret_val = 4;
|
|
goto err_nomem;
|
|
}
|
|
|
|
rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
|
|
rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
|
|
GFP_KERNEL);
|
|
if (!rxdr->desc) {
|
|
ret_val = 5;
|
|
goto err_nomem;
|
|
}
|
|
memset(rxdr->desc, 0, rxdr->size);
|
|
rxdr->next_to_use = rxdr->next_to_clean = 0;
|
|
|
|
rctl = er32(RCTL);
|
|
ew32(RCTL, rctl & ~E1000_RCTL_EN);
|
|
ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF));
|
|
ew32(RDBAH, ((u64)rxdr->dma >> 32));
|
|
ew32(RDLEN, rxdr->size);
|
|
ew32(RDH, 0);
|
|
ew32(RDT, 0);
|
|
rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
|
|
E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
|
|
(hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
|
|
ew32(RCTL, rctl);
|
|
|
|
for (i = 0; i < rxdr->count; i++) {
|
|
struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
|
|
struct sk_buff *skb;
|
|
|
|
skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
|
|
if (!skb) {
|
|
ret_val = 6;
|
|
goto err_nomem;
|
|
}
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
rxdr->buffer_info[i].skb = skb;
|
|
rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
|
|
rxdr->buffer_info[i].dma =
|
|
dma_map_single(&pdev->dev, skb->data,
|
|
E1000_RXBUFFER_2048, DMA_FROM_DEVICE);
|
|
rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
|
|
memset(skb->data, 0x00, skb->len);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_nomem:
|
|
e1000_free_desc_rings(adapter);
|
|
return ret_val;
|
|
}
|
|
|
|
static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
/* Write out to PHY registers 29 and 30 to disable the Receiver. */
|
|
e1000_write_phy_reg(hw, 29, 0x001F);
|
|
e1000_write_phy_reg(hw, 30, 0x8FFC);
|
|
e1000_write_phy_reg(hw, 29, 0x001A);
|
|
e1000_write_phy_reg(hw, 30, 0x8FF0);
|
|
}
|
|
|
|
static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u16 phy_reg;
|
|
|
|
/* Because we reset the PHY above, we need to re-force TX_CLK in the
|
|
* Extended PHY Specific Control Register to 25MHz clock. This
|
|
* value defaults back to a 2.5MHz clock when the PHY is reset.
|
|
*/
|
|
e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
|
|
phy_reg |= M88E1000_EPSCR_TX_CLK_25;
|
|
e1000_write_phy_reg(hw,
|
|
M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
|
|
|
|
/* In addition, because of the s/w reset above, we need to enable
|
|
* CRS on TX. This must be set for both full and half duplex
|
|
* operation.
|
|
*/
|
|
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
|
|
phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
|
|
e1000_write_phy_reg(hw,
|
|
M88E1000_PHY_SPEC_CTRL, phy_reg);
|
|
}
|
|
|
|
static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 ctrl_reg;
|
|
u16 phy_reg;
|
|
|
|
/* Setup the Device Control Register for PHY loopback test. */
|
|
|
|
ctrl_reg = er32(CTRL);
|
|
ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */
|
|
E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
|
|
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
|
|
E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
|
|
E1000_CTRL_FD); /* Force Duplex to FULL */
|
|
|
|
ew32(CTRL, ctrl_reg);
|
|
|
|
/* Read the PHY Specific Control Register (0x10) */
|
|
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
|
|
|
|
/* Clear Auto-Crossover bits in PHY Specific Control Register
|
|
* (bits 6:5).
|
|
*/
|
|
phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
|
|
e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
|
|
|
|
/* Perform software reset on the PHY */
|
|
e1000_phy_reset(hw);
|
|
|
|
/* Have to setup TX_CLK and TX_CRS after software reset */
|
|
e1000_phy_reset_clk_and_crs(adapter);
|
|
|
|
e1000_write_phy_reg(hw, PHY_CTRL, 0x8100);
|
|
|
|
/* Wait for reset to complete. */
|
|
udelay(500);
|
|
|
|
/* Have to setup TX_CLK and TX_CRS after software reset */
|
|
e1000_phy_reset_clk_and_crs(adapter);
|
|
|
|
/* Write out to PHY registers 29 and 30 to disable the Receiver. */
|
|
e1000_phy_disable_receiver(adapter);
|
|
|
|
/* Set the loopback bit in the PHY control register. */
|
|
e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
|
|
phy_reg |= MII_CR_LOOPBACK;
|
|
e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
|
|
|
|
/* Setup TX_CLK and TX_CRS one more time. */
|
|
e1000_phy_reset_clk_and_crs(adapter);
|
|
|
|
/* Check Phy Configuration */
|
|
e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
|
|
if (phy_reg != 0x4100)
|
|
return 9;
|
|
|
|
e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
|
|
if (phy_reg != 0x0070)
|
|
return 10;
|
|
|
|
e1000_read_phy_reg(hw, 29, &phy_reg);
|
|
if (phy_reg != 0x001A)
|
|
return 11;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 ctrl_reg = 0;
|
|
u32 stat_reg = 0;
|
|
|
|
hw->autoneg = false;
|
|
|
|
if (hw->phy_type == e1000_phy_m88) {
|
|
/* Auto-MDI/MDIX Off */
|
|
e1000_write_phy_reg(hw,
|
|
M88E1000_PHY_SPEC_CTRL, 0x0808);
|
|
/* reset to update Auto-MDI/MDIX */
|
|
e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
|
|
/* autoneg off */
|
|
e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
|
|
}
|
|
|
|
ctrl_reg = er32(CTRL);
|
|
|
|
/* force 1000, set loopback */
|
|
e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
|
|
|
|
/* Now set up the MAC to the same speed/duplex as the PHY. */
|
|
ctrl_reg = er32(CTRL);
|
|
ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
|
|
ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
|
|
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
|
|
E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
|
|
E1000_CTRL_FD); /* Force Duplex to FULL */
|
|
|
|
if (hw->media_type == e1000_media_type_copper &&
|
|
hw->phy_type == e1000_phy_m88)
|
|
ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
|
|
else {
|
|
/* Set the ILOS bit on the fiber Nic is half
|
|
* duplex link is detected. */
|
|
stat_reg = er32(STATUS);
|
|
if ((stat_reg & E1000_STATUS_FD) == 0)
|
|
ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
|
|
}
|
|
|
|
ew32(CTRL, ctrl_reg);
|
|
|
|
/* Disable the receiver on the PHY so when a cable is plugged in, the
|
|
* PHY does not begin to autoneg when a cable is reconnected to the NIC.
|
|
*/
|
|
if (hw->phy_type == e1000_phy_m88)
|
|
e1000_phy_disable_receiver(adapter);
|
|
|
|
udelay(500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u16 phy_reg = 0;
|
|
u16 count = 0;
|
|
|
|
switch (hw->mac_type) {
|
|
case e1000_82543:
|
|
if (hw->media_type == e1000_media_type_copper) {
|
|
/* Attempt to setup Loopback mode on Non-integrated PHY.
|
|
* Some PHY registers get corrupted at random, so
|
|
* attempt this 10 times.
|
|
*/
|
|
while (e1000_nonintegrated_phy_loopback(adapter) &&
|
|
count++ < 10);
|
|
if (count < 11)
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case e1000_82544:
|
|
case e1000_82540:
|
|
case e1000_82545:
|
|
case e1000_82545_rev_3:
|
|
case e1000_82546:
|
|
case e1000_82546_rev_3:
|
|
case e1000_82541:
|
|
case e1000_82541_rev_2:
|
|
case e1000_82547:
|
|
case e1000_82547_rev_2:
|
|
return e1000_integrated_phy_loopback(adapter);
|
|
break;
|
|
default:
|
|
/* Default PHY loopback work is to read the MII
|
|
* control register and assert bit 14 (loopback mode).
|
|
*/
|
|
e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
|
|
phy_reg |= MII_CR_LOOPBACK;
|
|
e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
|
|
return 0;
|
|
break;
|
|
}
|
|
|
|
return 8;
|
|
}
|
|
|
|
static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 rctl;
|
|
|
|
if (hw->media_type == e1000_media_type_fiber ||
|
|
hw->media_type == e1000_media_type_internal_serdes) {
|
|
switch (hw->mac_type) {
|
|
case e1000_82545:
|
|
case e1000_82546:
|
|
case e1000_82545_rev_3:
|
|
case e1000_82546_rev_3:
|
|
return e1000_set_phy_loopback(adapter);
|
|
break;
|
|
default:
|
|
rctl = er32(RCTL);
|
|
rctl |= E1000_RCTL_LBM_TCVR;
|
|
ew32(RCTL, rctl);
|
|
return 0;
|
|
}
|
|
} else if (hw->media_type == e1000_media_type_copper)
|
|
return e1000_set_phy_loopback(adapter);
|
|
|
|
return 7;
|
|
}
|
|
|
|
static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 rctl;
|
|
u16 phy_reg;
|
|
|
|
rctl = er32(RCTL);
|
|
rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
|
|
ew32(RCTL, rctl);
|
|
|
|
switch (hw->mac_type) {
|
|
case e1000_82545:
|
|
case e1000_82546:
|
|
case e1000_82545_rev_3:
|
|
case e1000_82546_rev_3:
|
|
default:
|
|
hw->autoneg = true;
|
|
e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
|
|
if (phy_reg & MII_CR_LOOPBACK) {
|
|
phy_reg &= ~MII_CR_LOOPBACK;
|
|
e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
|
|
e1000_phy_reset(hw);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void e1000_create_lbtest_frame(struct sk_buff *skb,
|
|
unsigned int frame_size)
|
|
{
|
|
memset(skb->data, 0xFF, frame_size);
|
|
frame_size &= ~1;
|
|
memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
|
|
memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
|
|
memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
|
|
}
|
|
|
|
static int e1000_check_lbtest_frame(struct sk_buff *skb,
|
|
unsigned int frame_size)
|
|
{
|
|
frame_size &= ~1;
|
|
if (*(skb->data + 3) == 0xFF) {
|
|
if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
|
|
(*(skb->data + frame_size / 2 + 12) == 0xAF)) {
|
|
return 0;
|
|
}
|
|
}
|
|
return 13;
|
|
}
|
|
|
|
static int e1000_run_loopback_test(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
|
|
struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int i, j, k, l, lc, good_cnt, ret_val=0;
|
|
unsigned long time;
|
|
|
|
ew32(RDT, rxdr->count - 1);
|
|
|
|
/* Calculate the loop count based on the largest descriptor ring
|
|
* The idea is to wrap the largest ring a number of times using 64
|
|
* send/receive pairs during each loop
|
|
*/
|
|
|
|
if (rxdr->count <= txdr->count)
|
|
lc = ((txdr->count / 64) * 2) + 1;
|
|
else
|
|
lc = ((rxdr->count / 64) * 2) + 1;
|
|
|
|
k = l = 0;
|
|
for (j = 0; j <= lc; j++) { /* loop count loop */
|
|
for (i = 0; i < 64; i++) { /* send the packets */
|
|
e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
|
|
1024);
|
|
dma_sync_single_for_device(&pdev->dev,
|
|
txdr->buffer_info[k].dma,
|
|
txdr->buffer_info[k].length,
|
|
DMA_TO_DEVICE);
|
|
if (unlikely(++k == txdr->count)) k = 0;
|
|
}
|
|
ew32(TDT, k);
|
|
msleep(200);
|
|
time = jiffies; /* set the start time for the receive */
|
|
good_cnt = 0;
|
|
do { /* receive the sent packets */
|
|
dma_sync_single_for_cpu(&pdev->dev,
|
|
rxdr->buffer_info[l].dma,
|
|
rxdr->buffer_info[l].length,
|
|
DMA_FROM_DEVICE);
|
|
|
|
ret_val = e1000_check_lbtest_frame(
|
|
rxdr->buffer_info[l].skb,
|
|
1024);
|
|
if (!ret_val)
|
|
good_cnt++;
|
|
if (unlikely(++l == rxdr->count)) l = 0;
|
|
/* time + 20 msecs (200 msecs on 2.4) is more than
|
|
* enough time to complete the receives, if it's
|
|
* exceeded, break and error off
|
|
*/
|
|
} while (good_cnt < 64 && jiffies < (time + 20));
|
|
if (good_cnt != 64) {
|
|
ret_val = 13; /* ret_val is the same as mis-compare */
|
|
break;
|
|
}
|
|
if (jiffies >= (time + 2)) {
|
|
ret_val = 14; /* error code for time out error */
|
|
break;
|
|
}
|
|
} /* end loop count loop */
|
|
return ret_val;
|
|
}
|
|
|
|
static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
*data = e1000_setup_desc_rings(adapter);
|
|
if (*data)
|
|
goto out;
|
|
*data = e1000_setup_loopback_test(adapter);
|
|
if (*data)
|
|
goto err_loopback;
|
|
*data = e1000_run_loopback_test(adapter);
|
|
e1000_loopback_cleanup(adapter);
|
|
|
|
err_loopback:
|
|
e1000_free_desc_rings(adapter);
|
|
out:
|
|
return *data;
|
|
}
|
|
|
|
static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
*data = 0;
|
|
if (hw->media_type == e1000_media_type_internal_serdes) {
|
|
int i = 0;
|
|
hw->serdes_has_link = false;
|
|
|
|
/* On some blade server designs, link establishment
|
|
* could take as long as 2-3 minutes */
|
|
do {
|
|
e1000_check_for_link(hw);
|
|
if (hw->serdes_has_link)
|
|
return *data;
|
|
msleep(20);
|
|
} while (i++ < 3750);
|
|
|
|
*data = 1;
|
|
} else {
|
|
e1000_check_for_link(hw);
|
|
if (hw->autoneg) /* if auto_neg is set wait for it */
|
|
msleep(4000);
|
|
|
|
if (!(er32(STATUS) & E1000_STATUS_LU)) {
|
|
*data = 1;
|
|
}
|
|
}
|
|
return *data;
|
|
}
|
|
|
|
static int e1000_get_sset_count(struct net_device *netdev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_TEST:
|
|
return E1000_TEST_LEN;
|
|
case ETH_SS_STATS:
|
|
return E1000_STATS_LEN;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void e1000_diag_test(struct net_device *netdev,
|
|
struct ethtool_test *eth_test, u64 *data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
bool if_running = netif_running(netdev);
|
|
|
|
set_bit(__E1000_TESTING, &adapter->flags);
|
|
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
|
|
/* Offline tests */
|
|
|
|
/* save speed, duplex, autoneg settings */
|
|
u16 autoneg_advertised = hw->autoneg_advertised;
|
|
u8 forced_speed_duplex = hw->forced_speed_duplex;
|
|
u8 autoneg = hw->autoneg;
|
|
|
|
e_info(hw, "offline testing starting\n");
|
|
|
|
/* Link test performed before hardware reset so autoneg doesn't
|
|
* interfere with test result */
|
|
if (e1000_link_test(adapter, &data[4]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
if (if_running)
|
|
/* indicate we're in test mode */
|
|
dev_close(netdev);
|
|
else
|
|
e1000_reset(adapter);
|
|
|
|
if (e1000_reg_test(adapter, &data[0]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
e1000_reset(adapter);
|
|
if (e1000_eeprom_test(adapter, &data[1]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
e1000_reset(adapter);
|
|
if (e1000_intr_test(adapter, &data[2]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
e1000_reset(adapter);
|
|
/* make sure the phy is powered up */
|
|
e1000_power_up_phy(adapter);
|
|
if (e1000_loopback_test(adapter, &data[3]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
/* restore speed, duplex, autoneg settings */
|
|
hw->autoneg_advertised = autoneg_advertised;
|
|
hw->forced_speed_duplex = forced_speed_duplex;
|
|
hw->autoneg = autoneg;
|
|
|
|
e1000_reset(adapter);
|
|
clear_bit(__E1000_TESTING, &adapter->flags);
|
|
if (if_running)
|
|
dev_open(netdev);
|
|
} else {
|
|
e_info(hw, "online testing starting\n");
|
|
/* Online tests */
|
|
if (e1000_link_test(adapter, &data[4]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
/* Online tests aren't run; pass by default */
|
|
data[0] = 0;
|
|
data[1] = 0;
|
|
data[2] = 0;
|
|
data[3] = 0;
|
|
|
|
clear_bit(__E1000_TESTING, &adapter->flags);
|
|
}
|
|
msleep_interruptible(4 * 1000);
|
|
}
|
|
|
|
static int e1000_wol_exclusion(struct e1000_adapter *adapter,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
int retval = 1; /* fail by default */
|
|
|
|
switch (hw->device_id) {
|
|
case E1000_DEV_ID_82542:
|
|
case E1000_DEV_ID_82543GC_FIBER:
|
|
case E1000_DEV_ID_82543GC_COPPER:
|
|
case E1000_DEV_ID_82544EI_FIBER:
|
|
case E1000_DEV_ID_82546EB_QUAD_COPPER:
|
|
case E1000_DEV_ID_82545EM_FIBER:
|
|
case E1000_DEV_ID_82545EM_COPPER:
|
|
case E1000_DEV_ID_82546GB_QUAD_COPPER:
|
|
case E1000_DEV_ID_82546GB_PCIE:
|
|
/* these don't support WoL at all */
|
|
wol->supported = 0;
|
|
break;
|
|
case E1000_DEV_ID_82546EB_FIBER:
|
|
case E1000_DEV_ID_82546GB_FIBER:
|
|
/* Wake events not supported on port B */
|
|
if (er32(STATUS) & E1000_STATUS_FUNC_1) {
|
|
wol->supported = 0;
|
|
break;
|
|
}
|
|
/* return success for non excluded adapter ports */
|
|
retval = 0;
|
|
break;
|
|
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
|
|
/* quad port adapters only support WoL on port A */
|
|
if (!adapter->quad_port_a) {
|
|
wol->supported = 0;
|
|
break;
|
|
}
|
|
/* return success for non excluded adapter ports */
|
|
retval = 0;
|
|
break;
|
|
default:
|
|
/* dual port cards only support WoL on port A from now on
|
|
* unless it was enabled in the eeprom for port B
|
|
* so exclude FUNC_1 ports from having WoL enabled */
|
|
if (er32(STATUS) & E1000_STATUS_FUNC_1 &&
|
|
!adapter->eeprom_wol) {
|
|
wol->supported = 0;
|
|
break;
|
|
}
|
|
|
|
retval = 0;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void e1000_get_wol(struct net_device *netdev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
wol->supported = WAKE_UCAST | WAKE_MCAST |
|
|
WAKE_BCAST | WAKE_MAGIC;
|
|
wol->wolopts = 0;
|
|
|
|
/* this function will set ->supported = 0 and return 1 if wol is not
|
|
* supported by this hardware */
|
|
if (e1000_wol_exclusion(adapter, wol) ||
|
|
!device_can_wakeup(&adapter->pdev->dev))
|
|
return;
|
|
|
|
/* apply any specific unsupported masks here */
|
|
switch (hw->device_id) {
|
|
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
|
|
/* KSP3 does not suppport UCAST wake-ups */
|
|
wol->supported &= ~WAKE_UCAST;
|
|
|
|
if (adapter->wol & E1000_WUFC_EX)
|
|
e_err(drv, "Interface does not support directed "
|
|
"(unicast) frame wake-up packets\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (adapter->wol & E1000_WUFC_EX)
|
|
wol->wolopts |= WAKE_UCAST;
|
|
if (adapter->wol & E1000_WUFC_MC)
|
|
wol->wolopts |= WAKE_MCAST;
|
|
if (adapter->wol & E1000_WUFC_BC)
|
|
wol->wolopts |= WAKE_BCAST;
|
|
if (adapter->wol & E1000_WUFC_MAG)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
}
|
|
|
|
static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (e1000_wol_exclusion(adapter, wol) ||
|
|
!device_can_wakeup(&adapter->pdev->dev))
|
|
return wol->wolopts ? -EOPNOTSUPP : 0;
|
|
|
|
switch (hw->device_id) {
|
|
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
|
|
if (wol->wolopts & WAKE_UCAST) {
|
|
e_err(drv, "Interface does not support directed "
|
|
"(unicast) frame wake-up packets\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* these settings will always override what we currently have */
|
|
adapter->wol = 0;
|
|
|
|
if (wol->wolopts & WAKE_UCAST)
|
|
adapter->wol |= E1000_WUFC_EX;
|
|
if (wol->wolopts & WAKE_MCAST)
|
|
adapter->wol |= E1000_WUFC_MC;
|
|
if (wol->wolopts & WAKE_BCAST)
|
|
adapter->wol |= E1000_WUFC_BC;
|
|
if (wol->wolopts & WAKE_MAGIC)
|
|
adapter->wol |= E1000_WUFC_MAG;
|
|
|
|
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_phys_id(struct net_device *netdev,
|
|
enum ethtool_phys_id_state state)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
switch (state) {
|
|
case ETHTOOL_ID_ACTIVE:
|
|
e1000_setup_led(hw);
|
|
return 2;
|
|
|
|
case ETHTOOL_ID_ON:
|
|
e1000_led_on(hw);
|
|
break;
|
|
|
|
case ETHTOOL_ID_OFF:
|
|
e1000_led_off(hw);
|
|
break;
|
|
|
|
case ETHTOOL_ID_INACTIVE:
|
|
e1000_cleanup_led(hw);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_get_coalesce(struct net_device *netdev,
|
|
struct ethtool_coalesce *ec)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (adapter->hw.mac_type < e1000_82545)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (adapter->itr_setting <= 4)
|
|
ec->rx_coalesce_usecs = adapter->itr_setting;
|
|
else
|
|
ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_coalesce(struct net_device *netdev,
|
|
struct ethtool_coalesce *ec)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
if (hw->mac_type < e1000_82545)
|
|
return -EOPNOTSUPP;
|
|
|
|
if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
|
|
((ec->rx_coalesce_usecs > 4) &&
|
|
(ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
|
|
(ec->rx_coalesce_usecs == 2))
|
|
return -EINVAL;
|
|
|
|
if (ec->rx_coalesce_usecs == 4) {
|
|
adapter->itr = adapter->itr_setting = 4;
|
|
} else if (ec->rx_coalesce_usecs <= 3) {
|
|
adapter->itr = 20000;
|
|
adapter->itr_setting = ec->rx_coalesce_usecs;
|
|
} else {
|
|
adapter->itr = (1000000 / ec->rx_coalesce_usecs);
|
|
adapter->itr_setting = adapter->itr & ~3;
|
|
}
|
|
|
|
if (adapter->itr_setting != 0)
|
|
ew32(ITR, 1000000000 / (adapter->itr * 256));
|
|
else
|
|
ew32(ITR, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_nway_reset(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
if (netif_running(netdev))
|
|
e1000_reinit_locked(adapter);
|
|
return 0;
|
|
}
|
|
|
|
static void e1000_get_ethtool_stats(struct net_device *netdev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
int i;
|
|
char *p = NULL;
|
|
|
|
e1000_update_stats(adapter);
|
|
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
|
|
switch (e1000_gstrings_stats[i].type) {
|
|
case NETDEV_STATS:
|
|
p = (char *) netdev +
|
|
e1000_gstrings_stats[i].stat_offset;
|
|
break;
|
|
case E1000_STATS:
|
|
p = (char *) adapter +
|
|
e1000_gstrings_stats[i].stat_offset;
|
|
break;
|
|
}
|
|
|
|
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
|
|
sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
|
|
}
|
|
/* BUG_ON(i != E1000_STATS_LEN); */
|
|
}
|
|
|
|
static void e1000_get_strings(struct net_device *netdev, u32 stringset,
|
|
u8 *data)
|
|
{
|
|
u8 *p = data;
|
|
int i;
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_TEST:
|
|
memcpy(data, *e1000_gstrings_test,
|
|
sizeof(e1000_gstrings_test));
|
|
break;
|
|
case ETH_SS_STATS:
|
|
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
|
|
memcpy(p, e1000_gstrings_stats[i].stat_string,
|
|
ETH_GSTRING_LEN);
|
|
p += ETH_GSTRING_LEN;
|
|
}
|
|
/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static const struct ethtool_ops e1000_ethtool_ops = {
|
|
.get_settings = e1000_get_settings,
|
|
.set_settings = e1000_set_settings,
|
|
.get_drvinfo = e1000_get_drvinfo,
|
|
.get_regs_len = e1000_get_regs_len,
|
|
.get_regs = e1000_get_regs,
|
|
.get_wol = e1000_get_wol,
|
|
.set_wol = e1000_set_wol,
|
|
.get_msglevel = e1000_get_msglevel,
|
|
.set_msglevel = e1000_set_msglevel,
|
|
.nway_reset = e1000_nway_reset,
|
|
.get_link = e1000_get_link,
|
|
.get_eeprom_len = e1000_get_eeprom_len,
|
|
.get_eeprom = e1000_get_eeprom,
|
|
.set_eeprom = e1000_set_eeprom,
|
|
.get_ringparam = e1000_get_ringparam,
|
|
.set_ringparam = e1000_set_ringparam,
|
|
.get_pauseparam = e1000_get_pauseparam,
|
|
.set_pauseparam = e1000_set_pauseparam,
|
|
.get_rx_csum = e1000_get_rx_csum,
|
|
.set_rx_csum = e1000_set_rx_csum,
|
|
.get_tx_csum = e1000_get_tx_csum,
|
|
.set_tx_csum = e1000_set_tx_csum,
|
|
.set_sg = ethtool_op_set_sg,
|
|
.set_tso = e1000_set_tso,
|
|
.self_test = e1000_diag_test,
|
|
.get_strings = e1000_get_strings,
|
|
.set_phys_id = e1000_set_phys_id,
|
|
.get_ethtool_stats = e1000_get_ethtool_stats,
|
|
.get_sset_count = e1000_get_sset_count,
|
|
.get_coalesce = e1000_get_coalesce,
|
|
.set_coalesce = e1000_set_coalesce,
|
|
};
|
|
|
|
void e1000_set_ethtool_ops(struct net_device *netdev)
|
|
{
|
|
SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
|
|
}
|