q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/arch/frv/mb93090-mb00/pci-vdk.c
Eric W. Biederman bba6f6fc68 [PATCH] MSI-X: fix resume crash 
So I think the right solution is to simply make pci_enable_device just
flip enable bits and move the rest of the work someplace else.

However a thorough cleanup is a little extreme for this point in the
release cycle, so I think a quick hack that makes the code not stomp the
irq when msi irq's are enabled should be the first fix.  Then we can
later make the code not change the irqs at all.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-28 13:59:37 -07:00

472 lines
13 KiB
C
Raw Blame History

/* pci-vdk.c: MB93090-MB00 (VDK) PCI support
*
* Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/mb-regs.h>
#include <asm/mb86943a.h>
#include "pci-frv.h"
unsigned int __nongpreldata pci_probe = 1;
int __nongpreldata pcibios_last_bus = -1;
struct pci_bus *__nongpreldata pci_root_bus;
struct pci_ops *__nongpreldata pci_root_ops;
/*
* Functions for accessing PCI configuration space
*/
#define CONFIG_CMD(bus, dev, where) \
(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
#define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80)
#define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3))
#define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2))
#define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88)
#define __set_PciCfgDataB(A,V) \
writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + (3 - ((A) & 3)))
#define __set_PciCfgDataW(A,V) \
writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + (2 - ((A) & 2)))
#define __set_PciCfgDataL(A,V) \
writel((V), (volatile void __iomem *) __region_CS1 + 0x88)
#define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
#define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
static inline int __query(const struct pci_dev *dev)
{
// return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0));
// return dev->bus->number==1;
// return dev->bus->number==0 &&
// (dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0));
return 0;
}
/*****************************************************************************/
/*
*
*/
static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
u32 *val)
{
u32 _value;
if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
_value = __get_PciBridgeDataL(where & ~3);
}
else {
__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
_value = __get_PciCfgDataL(where & ~3);
}
switch (size) {
case 1:
_value = _value >> ((where & 3) * 8);
break;
case 2:
_value = _value >> ((where & 2) * 8);
break;
case 4:
break;
default:
BUG();
}
*val = _value;
return PCIBIOS_SUCCESSFUL;
}
static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
u32 value)
{
switch (size) {
case 1:
if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
__set_PciBridgeDataB(where, value);
}
else {
__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
__set_PciCfgDataB(where, value);
}
break;
case 2:
if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
__set_PciBridgeDataW(where, value);
}
else {
__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
__set_PciCfgDataW(where, value);
}
break;
case 4:
if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
__set_PciBridgeDataL(where, value);
}
else {
__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
__set_PciCfgDataL(where, value);
}
break;
default:
BUG();
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops pci_direct_frv = {
pci_frv_read_config,
pci_frv_write_config,
};
/*
* Before we decide to use direct hardware access mechanisms, we try to do some
* trivial checks to ensure it at least _seems_ to be working -- we just test
* whether bus 00 contains a host bridge (this is similar to checking
* techniques used in XFree86, but ours should be more reliable since we
* attempt to make use of direct access hints provided by the PCI BIOS).
*
* This should be close to trivial, but it isn't, because there are buggy
* chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
*/
static int __init pci_sanity_check(struct pci_ops *o)
{
struct pci_bus bus; /* Fake bus and device */
u32 id;
bus.number = 0;
if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) {
printk("PCI: VDK Bridge device:vendor: %08x\n", id);
if (id == 0x200e10cf)
return 1;
}
printk("PCI: VDK Bridge: Sanity check failed\n");
return 0;
}
static struct pci_ops * __init pci_check_direct(void)
{
unsigned long flags;
local_irq_save(flags);
/* check if access works */
if (pci_sanity_check(&pci_direct_frv)) {
local_irq_restore(flags);
printk("PCI: Using configuration frv\n");
// request_mem_region(0xBE040000, 256, "FRV bridge");
// request_mem_region(0xBFFFFFF4, 12, "PCI frv");
return &pci_direct_frv;
}
local_irq_restore(flags);
return NULL;
}
/*
* Several buggy motherboards address only 16 devices and mirror
* them to next 16 IDs. We try to detect this `feature' on all
* primary buses (those containing host bridges as they are
* expected to be unique) and remove the ghost devices.
*/
static void __init pcibios_fixup_ghosts(struct pci_bus *b)
{
struct list_head *ln, *mn;
struct pci_dev *d, *e;
int mirror = PCI_DEVFN(16,0);
int seen_host_bridge = 0;
int i;
for (ln=b->devices.next; ln != &b->devices; ln=ln->next) {
d = pci_dev_b(ln);
if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
seen_host_bridge++;
for (mn=ln->next; mn != &b->devices; mn=mn->next) {
e = pci_dev_b(mn);
if (e->devfn != d->devfn + mirror ||
e->vendor != d->vendor ||
e->device != d->device ||
e->class != d->class)
continue;
for(i=0; i<PCI_NUM_RESOURCES; i++)
if (e->resource[i].start != d->resource[i].start ||
e->resource[i].end != d->resource[i].end ||
e->resource[i].flags != d->resource[i].flags)
continue;
break;
}
if (mn == &b->devices)
return;
}
if (!seen_host_bridge)
return;
printk("PCI: Ignoring ghost devices on bus %02x\n", b->number);
ln = &b->devices;
while (ln->next != &b->devices) {
d = pci_dev_b(ln->next);
if (d->devfn >= mirror) {
list_del(&d->global_list);
list_del(&d->bus_list);
kfree(d);
} else
ln = ln->next;
}
}
/*
* Discover remaining PCI buses in case there are peer host bridges.
* We use the number of last PCI bus provided by the PCI BIOS.
*/
static void __init pcibios_fixup_peer_bridges(void)
{
struct pci_bus bus;
struct pci_dev dev;
int n;
u16 l;
if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
return;
printk("PCI: Peer bridge fixup\n");
for (n=0; n <= pcibios_last_bus; n++) {
if (pci_find_bus(0, n))
continue;
bus.number = n;
bus.ops = pci_root_ops;
dev.bus = &bus;
for(dev.devfn=0; dev.devfn<256; dev.devfn += 8)
if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
l != 0x0000 && l != 0xffff) {
printk("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
printk("PCI: Discovered peer bus %02x\n", n);
pci_scan_bus(n, pci_root_ops, NULL);
break;
}
}
}
/*
* Exceptions for specific devices. Usually work-arounds for fatal design flaws.
*/
static void __init pci_fixup_umc_ide(struct pci_dev *d)
{
/*
* UM8886BF IDE controller sets region type bits incorrectly,
* therefore they look like memory despite of them being I/O.
*/
int i;
printk("PCI: Fixing base address flags for device %s\n", pci_name(d));
for(i=0; i<4; i++)
d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
}
static void __init pci_fixup_ide_bases(struct pci_dev *d)
{
int i;
/*
* PCI IDE controllers use non-standard I/O port decoding, respect it.
*/
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
return;
printk("PCI: IDE base address fixup for %s\n", pci_name(d));
for(i=0; i<4; i++) {
struct resource *r = &d->resource[i];
if ((r->start & ~0x80) == 0x374) {
r->start |= 2;
r->end = r->start;
}
}
}
static void __init pci_fixup_ide_trash(struct pci_dev *d)
{
int i;
/*
* There exist PCI IDE controllers which have utter garbage
* in first four base registers. Ignore that.
*/
printk("PCI: IDE base address trash cleared for %s\n", pci_name(d));
for(i=0; i<4; i++)
d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
}
static void __devinit pci_fixup_latency(struct pci_dev *d)
{
/*
* SiS 5597 and 5598 chipsets require latency timer set to
* at most 32 to avoid lockups.
*/
DBG("PCI: Setting max latency to 32\n");
pcibios_max_latency = 32;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
/*
* Called after each bus is probed, but before its children
* are examined.
*/
void __init pcibios_fixup_bus(struct pci_bus *bus)
{
#if 0
printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
#endif
pcibios_fixup_ghosts(bus);
pci_read_bridge_bases(bus);
if (bus->number == 0) {
struct list_head *ln;
struct pci_dev *dev;
for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
dev = pci_dev_b(ln);
if (dev->devfn == 0) {
dev->resource[0].start = 0;
dev->resource[0].end = 0;
}
}
}
}
/*
* Initialization. Try all known PCI access methods. Note that we support
* using both PCI BIOS and direct access: in such cases, we use I/O ports
* to access config space, but we still keep BIOS order of cards to be
* compatible with 2.0.X. This should go away some day.
*/
int __init pcibios_init(void)
{
struct pci_ops *dir = NULL;
if (!mb93090_mb00_detected)
return -ENXIO;
__reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP;
__reg_MB86943_ecs_base(1) = ((__region_CS2 + 0x01000000) >> 9) | 0x08000000;
__reg_MB86943_ecs_base(2) = ((__region_CS2 + 0x00000000) >> 9) | 0x08000000;
*(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000;
*(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000;
__reg_MB86943_sl_pci_io_base = (__region_CS2 + 0x04000000) >> 9;
__reg_MB86943_sl_pci_mem_base = (__region_CS2 + 0x08000000) >> 9;
__reg_MB86943_pci_sl_io_base = __region_CS2 + 0x04000000;
__reg_MB86943_pci_sl_mem_base = __region_CS2 + 0x08000000;
mb();
*(volatile unsigned long *)(__region_CS2+0x01300014) == 1;
ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
ioport_resource.end += ioport_resource.start;
printk("PCI IO window: %08llx-%08llx\n",
(unsigned long long) ioport_resource.start,
(unsigned long long) ioport_resource.end);
iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
/* Reserve somewhere to write to flush posted writes. */
iomem_resource.start += 0x400;
iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
iomem_resource.end += iomem_resource.start;
printk("PCI MEM window: %08llx-%08llx\n",
(unsigned long long) iomem_resource.start,
(unsigned long long) iomem_resource.end);
printk("PCI DMA memory: %08lx-%08lx\n",
dma_coherent_mem_start, dma_coherent_mem_end);
if (!pci_probe)
return -ENXIO;
dir = pci_check_direct();
if (dir)
pci_root_ops = dir;
else {
printk("PCI: No PCI bus detected\n");
return -ENXIO;
}
printk("PCI: Probing PCI hardware\n");
pci_root_bus = pci_scan_bus(0, pci_root_ops, NULL);
pcibios_irq_init();
pcibios_fixup_peer_bridges();
pcibios_fixup_irqs();
pcibios_resource_survey();
return 0;
}
arch_initcall(pcibios_init);
char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "off")) {
pci_probe = 0;
return NULL;
} else if (!strncmp(str, "lastbus=", 8)) {
pcibios_last_bus = simple_strtol(str+8, NULL, 0);
return NULL;
}
return str;
}
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
int err;
if ((err = pcibios_enable_resources(dev, mask)) < 0)
return err;
if (!dev->msi_enabled)
pcibios_enable_irq(dev);
return 0;
}
Reference in a new issue View git blame Copy permalink