q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/serial/cpm_uart/cpm_uart_cpm1.c
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h> 
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00

280 lines
8.3 KiB
C
Raw Blame History

/*
* linux/drivers/serial/cpm_uart.c
*
* Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
*
* Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
* Pantelis Antoniou (panto@intracom.gr) (CPM1)
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
* (C) 2006 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/serial_core.h>
#include <linux/kernel.h>
#include "cpm_uart.h"
/**************************************************************/
void cpm_line_cr_cmd(int line, int cmd)
{
ushort val;
volatile cpm8xx_t *cp = cpmp;
switch (line) {
case UART_SMC1:
val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
break;
case UART_SMC2:
val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
break;
case UART_SCC1:
val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
break;
case UART_SCC2:
val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
break;
case UART_SCC3:
val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
break;
case UART_SCC4:
val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
break;
default:
return;
}
cp->cp_cpcr = val;
while (cp->cp_cpcr & CPM_CR_FLG) ;
}
void smc1_lineif(struct uart_cpm_port *pinfo)
{
pinfo->brg = 1;
}
void smc2_lineif(struct uart_cpm_port *pinfo)
{
pinfo->brg = 2;
}
void scc1_lineif(struct uart_cpm_port *pinfo)
{
/* XXX SCC1: insert port configuration here */
pinfo->brg = 1;
}
void scc2_lineif(struct uart_cpm_port *pinfo)
{
/* XXX SCC2: insert port configuration here */
pinfo->brg = 2;
}
void scc3_lineif(struct uart_cpm_port *pinfo)
{
/* XXX SCC3: insert port configuration here */
pinfo->brg = 3;
}
void scc4_lineif(struct uart_cpm_port *pinfo)
{
/* XXX SCC4: insert port configuration here */
pinfo->brg = 4;
}
/*
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
* receive buffer descriptors from dual port ram, and a character
* buffer area from host mem. If we are allocating for the console we need
* to do it from bootmem
*/
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
{
int dpmemsz, memsz;
u8 *dp_mem;
uint dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
dp_offset = cpm_dpalloc(dpmemsz, 8);
if (IS_DPERR(dp_offset)) {
printk(KERN_ERR
"cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
return -ENOMEM;
}
dp_mem = cpm_dpram_addr(dp_offset);
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
/* was hostalloc but changed cause it blows away the */
/* large tlb mapping when pinning the kernel area */
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = (u32)mem_addr;
} else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
GFP_KERNEL);
if (mem_addr == NULL) {
cpm_dpfree(dp_offset);
printk(KERN_ERR
"cpm_uart_cpm1.c: could not allocate coherent memory\n");
return -ENOMEM;
}
pinfo->dp_addr = dp_offset;
pinfo->mem_addr = mem_addr; /* virtual address*/
pinfo->dma_addr = dma_addr; /* physical address*/
pinfo->mem_size = memsz;
pinfo->rx_buf = mem_addr;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
* pinfo->rx_fifosize);
pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
return 0;
}
void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
{
dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
pinfo->tx_fifosize), pinfo->mem_addr,
pinfo->dma_addr);
cpm_dpfree(pinfo->dp_addr);
}
/* Setup any dynamic params in the uart desc */
int cpm_uart_init_portdesc(void)
{
pr_debug("CPM uart[-]:init portdesc\n");
cpm_uart_nr = 0;
#ifdef CONFIG_SERIAL_CPM_SMC1
cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
/*
* Is SMC1 being relocated?
*/
# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
cpm_uart_ports[UART_SMC1].smcup =
(smc_uart_t *) & cpmp->cp_dparam[0x3C0];
# else
cpm_uart_ports[UART_SMC1].smcup =
(smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
# endif
cpm_uart_ports[UART_SMC1].port.mapbase =
(unsigned long)&cpmp->cp_smc[0];
cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
cpm_uart_ports[UART_SMC2].smcup =
(smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
cpm_uart_ports[UART_SMC2].port.mapbase =
(unsigned long)&cpmp->cp_smc[1];
cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC1
cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
cpm_uart_ports[UART_SCC1].sccup =
(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
cpm_uart_ports[UART_SCC1].port.mapbase =
(unsigned long)&cpmp->cp_scc[0];
cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
cpm_uart_ports[UART_SCC2].sccup =
(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
cpm_uart_ports[UART_SCC2].port.mapbase =
(unsigned long)&cpmp->cp_scc[1];
cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
cpm_uart_ports[UART_SCC3].sccup =
(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
cpm_uart_ports[UART_SCC3].port.mapbase =
(unsigned long)&cpmp->cp_scc[2];
cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
cpm_uart_ports[UART_SCC4].sccup =
(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
cpm_uart_ports[UART_SCC4].port.mapbase =
(unsigned long)&cpmp->cp_scc[3];
cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
#endif
return 0;
}
Reference in a new issue View git blame Copy permalink