linux/include/asm-x86/smp.h
Suresh Siddha 1b374e4d6f x64, x2apic/intr-remap: basic apic ops support
Introduce basic apic operations which handle the apic programming. This
will be used later to introduce another specific operations for x2apic.

For the perfomance critial accesses like IPI's, EOI etc, we use the
native operations as they are already referenced by different
indirections like genapic, irq_chip etc.

64bit Paravirt ops can also define their apic operations accordingly.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12 08:44:59 +02:00

201 lines
4.8 KiB
C

#ifndef _ASM_X86_SMP_H_
#define _ASM_X86_SMP_H_
#ifndef __ASSEMBLY__
#include <linux/cpumask.h>
#include <linux/init.h>
#include <asm/percpu.h>
/*
* We need the APIC definitions automatically as part of 'smp.h'
*/
#ifdef CONFIG_X86_LOCAL_APIC
# include <asm/mpspec.h>
# include <asm/apic.h>
# ifdef CONFIG_X86_IO_APIC
# include <asm/io_apic.h>
# endif
#endif
#include <asm/pda.h>
#include <asm/thread_info.h>
extern cpumask_t cpu_callout_map;
extern cpumask_t cpu_initialized;
extern cpumask_t cpu_callin_map;
extern void (*mtrr_hook)(void);
extern void zap_low_mappings(void);
extern int smp_num_siblings;
extern unsigned int num_processors;
extern cpumask_t cpu_initialized;
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
DECLARE_PER_CPU(cpumask_t, cpu_core_map);
DECLARE_PER_CPU(u16, cpu_llc_id);
DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
/* Static state in head.S used to set up a CPU */
extern struct {
void *sp;
unsigned short ss;
} stack_start;
struct smp_ops {
void (*smp_prepare_boot_cpu)(void);
void (*smp_prepare_cpus)(unsigned max_cpus);
int (*cpu_up)(unsigned cpu);
void (*smp_cpus_done)(unsigned max_cpus);
void (*smp_send_stop)(void);
void (*smp_send_reschedule)(int cpu);
int (*smp_call_function_mask)(cpumask_t mask,
void (*func)(void *info), void *info,
int wait);
};
/* Globals due to paravirt */
extern void set_cpu_sibling_map(int cpu);
#ifdef CONFIG_SMP
#ifndef CONFIG_PARAVIRT
#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
#endif
extern struct smp_ops smp_ops;
static inline void smp_send_stop(void)
{
smp_ops.smp_send_stop();
}
static inline void smp_prepare_boot_cpu(void)
{
smp_ops.smp_prepare_boot_cpu();
}
static inline void smp_prepare_cpus(unsigned int max_cpus)
{
smp_ops.smp_prepare_cpus(max_cpus);
}
static inline void smp_cpus_done(unsigned int max_cpus)
{
smp_ops.smp_cpus_done(max_cpus);
}
static inline int __cpu_up(unsigned int cpu)
{
return smp_ops.cpu_up(cpu);
}
static inline void smp_send_reschedule(int cpu)
{
smp_ops.smp_send_reschedule(cpu);
}
static inline int smp_call_function_mask(cpumask_t mask,
void (*func) (void *info), void *info,
int wait)
{
return smp_ops.smp_call_function_mask(mask, func, info, wait);
}
void native_smp_prepare_boot_cpu(void);
void native_smp_prepare_cpus(unsigned int max_cpus);
void native_smp_cpus_done(unsigned int max_cpus);
int native_cpu_up(unsigned int cpunum);
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
void smp_store_cpu_info(int id);
#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
/* We don't mark CPUs online until __cpu_up(), so we need another measure */
static inline int num_booting_cpus(void)
{
return cpus_weight(cpu_callout_map);
}
#endif /* CONFIG_SMP */
#if defined(CONFIG_SMP) && defined(CONFIG_HOTPLUG_CPU)
extern void prefill_possible_map(void);
#else
static inline void prefill_possible_map(void)
{
}
#endif
extern unsigned disabled_cpus __cpuinitdata;
#ifdef CONFIG_X86_32_SMP
/*
* This function is needed by all SMP systems. It must _always_ be valid
* from the initial startup. We map APIC_BASE very early in page_setup(),
* so this is correct in the x86 case.
*/
DECLARE_PER_CPU(int, cpu_number);
#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
extern int safe_smp_processor_id(void);
#elif defined(CONFIG_X86_64_SMP)
#define raw_smp_processor_id() read_pda(cpunumber)
#define stack_smp_processor_id() \
({ \
struct thread_info *ti; \
__asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK)); \
ti->cpu; \
})
#define safe_smp_processor_id() smp_processor_id()
#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
#define cpu_physical_id(cpu) boot_cpu_physical_apicid
#define safe_smp_processor_id() 0
#define stack_smp_processor_id() 0
#endif
#ifdef CONFIG_X86_LOCAL_APIC
#ifndef CONFIG_X86_64
static inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
}
static inline unsigned int read_apic_id(void)
{
return *(u32 *)(APIC_BASE + APIC_ID);
}
#endif
# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
extern int hard_smp_processor_id(void);
# else
# include <mach_apicdef.h>
static inline int hard_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_ID(read_apic_id());
}
# endif /* APIC_DEFINITION */
#else /* CONFIG_X86_LOCAL_APIC */
# ifndef CONFIG_SMP
# define hard_smp_processor_id() 0
# endif
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_HOTPLUG_CPU
extern void cpu_uninit(void);
#endif
extern void lock_ipi_call_lock(void);
extern void unlock_ipi_call_lock(void);
#endif /* __ASSEMBLY__ */
#endif