ed8dfd22ea
During kernel init, we reset all IP blocks on the OMAP that we can, even if there is no driver compiled for that IP block. Unlike most IP blocks, the I2C block requires some extra programming for this to work. This reset code is incorrectly omitted when the I2C driver is deselected. In this circumstance, the build breaks. Fix by compiling the I2C reset code unconditionally. Problem reported by Russell King <linux@arm.linux.org.uk>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Shubhrajyoti <shubhrajyoti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
270 lines
9.1 KiB
Makefile
270 lines
9.1 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
# Common support
|
|
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
|
|
common.o gpio.o dma.o wd_timer.o display.o i2c.o
|
|
|
|
omap-2-3-common = irq.o sdrc.o
|
|
hwmod-common = omap_hwmod.o \
|
|
omap_hwmod_common_data.o
|
|
clock-common = clock.o clock_common_data.o \
|
|
clkt_dpll.o clkt_clksel.o
|
|
secure-common = omap-smc.o omap-secure.o
|
|
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
|
|
|
|
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
|
|
|
|
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
|
|
|
|
# SMP support ONLY available for OMAP4
|
|
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
|
|
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
|
|
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o \
|
|
sleep44xx.o
|
|
|
|
plus_sec := $(call as-instr,.arch_extension sec,+sec)
|
|
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
# Functions loaded to SRAM
|
|
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
|
|
|
|
AFLAGS_sram242x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram243x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
|
|
|
|
# Pin multiplexing
|
|
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
|
|
|
|
# SMS/SDRC
|
|
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
|
|
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
|
|
|
|
# OPP table initialization
|
|
ifeq ($(CONFIG_PM_OPP),y)
|
|
obj-y += opp.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
|
|
endif
|
|
|
|
# Power Management
|
|
ifeq ($(CONFIG_PM),y)
|
|
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
|
|
cpuidle34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o \
|
|
cpuidle44xx.o
|
|
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
|
|
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
|
|
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
|
|
|
|
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
|
|
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
ifeq ($(CONFIG_PM_VERBOSE),y)
|
|
CFLAGS_pm_bus.o += -DDEBUG
|
|
endif
|
|
|
|
endif
|
|
|
|
# PRCM
|
|
obj-y += prm_common.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
|
|
vc3xxx_data.o vp3xxx_data.o
|
|
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
|
|
# will be removed once the OMAP4 part of the codebase is converted to
|
|
# use OMAP4-specific PRCM functions.
|
|
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
|
|
cm44xx.o prcm_mpu44xx.o \
|
|
prminst44xx.o vc44xx_data.o \
|
|
vp44xx_data.o prm44xx.o
|
|
|
|
# OMAP voltage domains
|
|
voltagedomain-common := voltage.o vc.o vp.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \
|
|
voltagedomains2xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
|
|
voltagedomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
|
|
voltagedomains44xx_data.o
|
|
|
|
# OMAP powerdomain framework
|
|
powerdomain-common += powerdomain.o powerdomain-common.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
|
|
powerdomain2xxx_3xxx.o \
|
|
powerdomains2xxx_data.o \
|
|
powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
|
|
powerdomain2xxx_3xxx.o \
|
|
powerdomains3xxx_data.o \
|
|
powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
|
|
powerdomain44xx.o \
|
|
powerdomains44xx_data.o
|
|
|
|
# PRCM clockdomain control
|
|
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
|
|
clockdomain2xxx_3xxx.o \
|
|
clockdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
|
|
clockdomain2xxx_3xxx.o \
|
|
clockdomains2xxx_3xxx_data.o \
|
|
clockdomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
|
|
clockdomain44xx.o \
|
|
clockdomains44xx_data.o
|
|
|
|
# Clock framework
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
|
|
clkt2xxx_sys.o \
|
|
clkt2xxx_dpllcore.o \
|
|
clkt2xxx_virt_prcm_set.o \
|
|
clkt2xxx_apll.o clkt2xxx_osc.o \
|
|
clkt2xxx_dpll.o clkt_iclk.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
|
|
clock34xx.o clkt34xx_dpll3m2.o \
|
|
clock3517.o clock36xx.o \
|
|
dpll3xxx.o clock3xxx_data.o \
|
|
clkt_iclk.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
|
|
dpll3xxx.o dpll44xx.o
|
|
|
|
# OMAP2 clock rate set data (old "OPP" data)
|
|
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
|
|
|
|
# hwmod data
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_3xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_interconnect_data.o \
|
|
omap_hwmod_2xxx_3xxx_interconnect_data.o \
|
|
omap_hwmod_2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_3xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_interconnect_data.o \
|
|
omap_hwmod_2xxx_3xxx_interconnect_data.o \
|
|
omap_hwmod_2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_3xxx_interconnect_data.o \
|
|
omap_hwmod_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
|
|
|
|
# EMU peripherals
|
|
obj-$(CONFIG_OMAP3_EMU) += emu.o
|
|
|
|
# L3 interconnect
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o
|
|
|
|
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
|
|
mailbox_mach-objs := mailbox.o
|
|
|
|
obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
|
|
|
|
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
|
|
obj-y += $(iommu-m) $(iommu-y)
|
|
|
|
ifneq ($(CONFIG_TIDSPBRIDGE),)
|
|
obj-y += dsp.o
|
|
endif
|
|
|
|
# Specific board support
|
|
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
|
|
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
|
|
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
|
|
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
|
|
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
|
|
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
|
|
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
|
|
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
|
|
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
|
|
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
|
|
obj-$(CONFIG_MACH_OVERO) += board-overo.o
|
|
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
|
|
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
|
|
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
|
|
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
|
|
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
|
|
sdram-nokia.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
|
|
sdram-nokia.o \
|
|
board-rx51-peripherals.o \
|
|
board-rx51-video.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o \
|
|
board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o \
|
|
board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o
|
|
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
|
|
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
|
|
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
|
|
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
|
|
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
|
|
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
|
|
|
|
obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
|
|
|
|
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
|
|
|
|
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
|
|
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
|
|
obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o
|
|
|
|
# Platform specific device init code
|
|
|
|
omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
|
|
omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
|
|
obj-y += $(omap-flash-y) $(omap-flash-m)
|
|
|
|
omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
|
|
obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
|
|
|
|
|
|
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
|
|
obj-y += $(usbfs-m) $(usbfs-y)
|
|
obj-y += usb-musb.o
|
|
obj-y += omap_phy_internal.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
|
|
obj-y += usb-host.o
|
|
|
|
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
|
|
obj-y += $(onenand-m) $(onenand-y)
|
|
|
|
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
|
|
obj-y += $(nand-m) $(nand-y)
|
|
|
|
smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
|
|
obj-y += $(smc91x-m) $(smc91x-y)
|
|
|
|
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
|
|
obj-y += $(smsc911x-m) $(smsc911x-y)
|
|
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
|
|
|
|
obj-y += common-board-devices.o twl-common.o
|