linux/arch/mips/sgi-ip22/ip22-irq.S

119 lines
3.0 KiB
ArmAsm

/*
* ip22-irq.S: Interrupt exception dispatch code for FullHouse and
* Guiness.
*
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
*/
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
/* A lot of complication here is taken away because:
*
* 1) We handle one interrupt and return, sitting in a loop and moving across
* all the pending IRQ bits in the cause register is _NOT_ the answer, the
* common case is one pending IRQ so optimize in that direction.
*
* 2) We need not check against bits in the status register IRQ mask, that
* would make this routine slow as hell.
*
* 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
* between like BSD spl() brain-damage.
*
* Furthermore, the IRQs on the INDY look basically (barring software IRQs
* which we don't use at all) like:
*
* MIPS IRQ Source
* -------- ------
* 0 Software (ignored)
* 1 Software (ignored)
* 2 Local IRQ level zero
* 3 Local IRQ level one
* 4 8254 Timer zero
* 5 8254 Timer one
* 6 Bus Error
* 7 R4k timer (what we use)
*
* We handle the IRQ according to _our_ priority which is:
*
* Highest ---- R4k Timer
* Local IRQ zero
* Local IRQ one
* Bus Error
* 8254 Timer zero
* Lowest ---- 8254 Timer one
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
*/
.text
.set noreorder
.set noat
.align 5
NESTED(indyIRQ, PT_SIZE, sp)
SAVE_ALL
CLI
.set at
mfc0 s0, CP0_CAUSE # get irq mask
/* First we check for r4k counter/timer IRQ. */
andi a0, s0, CAUSEF_IP7
beq a0, zero, 1f
andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero
/* Wheee, a timer interrupt. */
jal indy_r4k_timer_interrupt
move a0, sp # delay slot
j ret_from_irq
nop # delay slot
1:
beq a0, zero, 1f
andi a0, s0, CAUSEF_IP3 # delay slot, check local level one
/* Wheee, local level zero interrupt. */
jal indy_local0_irqdispatch
move a0, sp # delay slot
j ret_from_irq
nop # delay slot
1:
beq a0, zero, 1f
andi a0, s0, CAUSEF_IP6 # delay slot, check bus error
/* Wheee, local level one interrupt. */
jal indy_local1_irqdispatch
move a0, sp # delay slot
j ret_from_irq
nop # delay slot
1:
beq a0, zero, 1f
andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) # delay slot
/* Wheee, an asynchronous bus error... */
jal indy_buserror_irq
move a0, sp # delay slot
j ret_from_irq
nop # delay slot
1:
/* Here by mistake? It is possible, that by the time we take
* the exception the IRQ pin goes low, so just leave if this
* is the case.
*/
beq a0, zero, 1f
nop # delay slot
/* Must be one of the 8254 timers... */
jal indy_8254timer_irq
move a0, sp # delay slot
1:
j ret_from_irq
nop # delay slot
END(indyIRQ)