linux/drivers/mfd/wm8994-irq.c
Mark Brown c9fbf7e070 mfd: Add WM8994 interrupt controller support
The WM8994 has an interrupt controller which supports interrupts for
both CODEC and GPIO portions of the chip. Support this using genirq,
while allowing for systems that do not have an interrupt hooked up.

Wrapper functions are provided for the IRQ request and free to simplify
the code in consumer drivers when handling cases where IRQs are not
set up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2010-04-05 19:18:07 +01:00

310 lines
7 KiB
C

/*
* wm8994-irq.c -- Interrupt controller support for Wolfson WM8994
*
* Copyright 2010 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/delay.h>
struct wm8994_irq_data {
int reg;
int mask;
};
static struct wm8994_irq_data wm8994_irqs[] = {
[WM8994_IRQ_TEMP_SHUT] = {
.reg = 2,
.mask = WM8994_TEMP_SHUT_EINT,
},
[WM8994_IRQ_MIC1_DET] = {
.reg = 2,
.mask = WM8994_MIC1_DET_EINT,
},
[WM8994_IRQ_MIC1_SHRT] = {
.reg = 2,
.mask = WM8994_MIC1_SHRT_EINT,
},
[WM8994_IRQ_MIC2_DET] = {
.reg = 2,
.mask = WM8994_MIC2_DET_EINT,
},
[WM8994_IRQ_MIC2_SHRT] = {
.reg = 2,
.mask = WM8994_MIC2_SHRT_EINT,
},
[WM8994_IRQ_FLL1_LOCK] = {
.reg = 2,
.mask = WM8994_FLL1_LOCK_EINT,
},
[WM8994_IRQ_FLL2_LOCK] = {
.reg = 2,
.mask = WM8994_FLL2_LOCK_EINT,
},
[WM8994_IRQ_SRC1_LOCK] = {
.reg = 2,
.mask = WM8994_SRC1_LOCK_EINT,
},
[WM8994_IRQ_SRC2_LOCK] = {
.reg = 2,
.mask = WM8994_SRC2_LOCK_EINT,
},
[WM8994_IRQ_AIF1DRC1_SIG_DET] = {
.reg = 2,
.mask = WM8994_AIF1DRC1_SIG_DET,
},
[WM8994_IRQ_AIF1DRC2_SIG_DET] = {
.reg = 2,
.mask = WM8994_AIF1DRC2_SIG_DET_EINT,
},
[WM8994_IRQ_AIF2DRC_SIG_DET] = {
.reg = 2,
.mask = WM8994_AIF2DRC_SIG_DET_EINT,
},
[WM8994_IRQ_FIFOS_ERR] = {
.reg = 2,
.mask = WM8994_FIFOS_ERR_EINT,
},
[WM8994_IRQ_WSEQ_DONE] = {
.reg = 2,
.mask = WM8994_WSEQ_DONE_EINT,
},
[WM8994_IRQ_DCS_DONE] = {
.reg = 2,
.mask = WM8994_DCS_DONE_EINT,
},
[WM8994_IRQ_TEMP_WARN] = {
.reg = 2,
.mask = WM8994_TEMP_WARN_EINT,
},
[WM8994_IRQ_GPIO(1)] = {
.reg = 1,
.mask = WM8994_GP1_EINT,
},
[WM8994_IRQ_GPIO(2)] = {
.reg = 1,
.mask = WM8994_GP2_EINT,
},
[WM8994_IRQ_GPIO(3)] = {
.reg = 1,
.mask = WM8994_GP3_EINT,
},
[WM8994_IRQ_GPIO(4)] = {
.reg = 1,
.mask = WM8994_GP4_EINT,
},
[WM8994_IRQ_GPIO(5)] = {
.reg = 1,
.mask = WM8994_GP5_EINT,
},
[WM8994_IRQ_GPIO(6)] = {
.reg = 1,
.mask = WM8994_GP6_EINT,
},
[WM8994_IRQ_GPIO(7)] = {
.reg = 1,
.mask = WM8994_GP7_EINT,
},
[WM8994_IRQ_GPIO(8)] = {
.reg = 1,
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(9)] = {
.reg = 1,
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(10)] = {
.reg = 1,
.mask = WM8994_GP10_EINT,
},
[WM8994_IRQ_GPIO(11)] = {
.reg = 1,
.mask = WM8994_GP11_EINT,
},
};
static inline int irq_data_to_status_reg(struct wm8994_irq_data *irq_data)
{
return WM8994_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
}
static inline int irq_data_to_mask_reg(struct wm8994_irq_data *irq_data)
{
return WM8994_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
}
static inline struct wm8994_irq_data *irq_to_wm8994_irq(struct wm8994 *wm8994,
int irq)
{
return &wm8994_irqs[irq - wm8994->irq_base];
}
static void wm8994_irq_lock(unsigned int irq)
{
struct wm8994 *wm8994 = get_irq_chip_data(irq);
mutex_lock(&wm8994->irq_lock);
}
static void wm8994_irq_sync_unlock(unsigned int irq)
{
struct wm8994 *wm8994 = get_irq_chip_data(irq);
int i;
for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
/* If there's been a change in the mask write it back
* to the hardware. */
if (wm8994->irq_masks_cur[i] != wm8994->irq_masks_cache[i]) {
wm8994->irq_masks_cache[i] = wm8994->irq_masks_cur[i];
wm8994_reg_write(wm8994,
WM8994_INTERRUPT_STATUS_1_MASK + i,
wm8994->irq_masks_cur[i]);
}
}
mutex_unlock(&wm8994->irq_lock);
}
static void wm8994_irq_unmask(unsigned int irq)
{
struct wm8994 *wm8994 = get_irq_chip_data(irq);
struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq);
wm8994->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
}
static void wm8994_irq_mask(unsigned int irq)
{
struct wm8994 *wm8994 = get_irq_chip_data(irq);
struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq);
wm8994->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
}
static struct irq_chip wm8994_irq_chip = {
.name = "wm8994",
.bus_lock = wm8994_irq_lock,
.bus_sync_unlock = wm8994_irq_sync_unlock,
.mask = wm8994_irq_mask,
.unmask = wm8994_irq_unmask,
};
/* The processing of the primary interrupt occurs in a thread so that
* we can interact with the device over I2C or SPI. */
static irqreturn_t wm8994_irq_thread(int irq, void *data)
{
struct wm8994 *wm8994 = data;
unsigned int i;
u16 status[WM8994_NUM_IRQ_REGS];
int ret;
ret = wm8994_bulk_read(wm8994, WM8994_INTERRUPT_STATUS_1,
WM8994_NUM_IRQ_REGS, status);
if (ret < 0) {
dev_err(wm8994->dev, "Failed to read interrupt status: %d\n",
ret);
return IRQ_NONE;
}
/* Apply masking */
for (i = 0; i < WM8994_NUM_IRQ_REGS; i++)
status[i] &= ~wm8994->irq_masks_cur[i];
/* Report */
for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) {
if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask)
handle_nested_irq(wm8994->irq_base + i);
}
/* Ack any unmasked IRQs */
for (i = 0; i < ARRAY_SIZE(status); i++) {
if (status[i])
wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1 + i,
status[i]);
}
return IRQ_HANDLED;
}
int wm8994_irq_init(struct wm8994 *wm8994)
{
int i, cur_irq, ret;
mutex_init(&wm8994->irq_lock);
/* Mask the individual interrupt sources */
for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
wm8994->irq_masks_cur[i] = 0xffff;
wm8994->irq_masks_cache[i] = 0xffff;
wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK + i,
0xffff);
}
if (!wm8994->irq) {
dev_warn(wm8994->dev,
"No interrupt specified, no interrupts\n");
wm8994->irq_base = 0;
return 0;
}
if (!wm8994->irq_base) {
dev_err(wm8994->dev,
"No interrupt base specified, no interrupts\n");
return 0;
}
/* Register them with genirq */
for (cur_irq = wm8994->irq_base;
cur_irq < ARRAY_SIZE(wm8994_irqs) + wm8994->irq_base;
cur_irq++) {
set_irq_chip_data(cur_irq, wm8994);
set_irq_chip_and_handler(cur_irq, &wm8994_irq_chip,
handle_edge_irq);
set_irq_nested_thread(cur_irq, 1);
/* ARM needs us to explicitly flag the IRQ as valid
* and will set them noprobe when we do so. */
#ifdef CONFIG_ARM
set_irq_flags(cur_irq, IRQF_VALID);
#else
set_irq_noprobe(cur_irq);
#endif
}
ret = request_threaded_irq(wm8994->irq, NULL, wm8994_irq_thread,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"wm8994", wm8994);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to request IRQ %d: %d\n",
wm8994->irq, ret);
return ret;
}
/* Enable top level interrupt if it was masked */
wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0);
return 0;
}
void wm8994_irq_exit(struct wm8994 *wm8994)
{
if (wm8994->irq)
free_irq(wm8994->irq, wm8994);
}