linux/drivers/net/wireless/ath/ath.h
Felix Fietkau 0cb9e06b63 ath: unshare struct ath_bus_ops between ath5k and ath9k
This struct is not used in any common code, and moving it out of
the ath header makes it easier to add more driver specific ops.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14 15:35:08 -04:00

288 lines
7.8 KiB
C

/*
* Copyright (c) 2008-2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef ATH_H
#define ATH_H
#include <linux/skbuff.h>
#include <linux/if_ether.h>
#include <linux/spinlock.h>
#include <net/mac80211.h>
/*
* The key cache is used for h/w cipher state and also for
* tracking station state such as the current tx antenna.
* We also setup a mapping table between key cache slot indices
* and station state to short-circuit node lookups on rx.
* Different parts have different size key caches. We handle
* up to ATH_KEYMAX entries (could dynamically allocate state).
*/
#define ATH_KEYMAX 128 /* max key cache size we handle */
static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
struct ath_ani {
bool caldone;
unsigned int longcal_timer;
unsigned int shortcal_timer;
unsigned int resetcal_timer;
unsigned int checkani_timer;
struct timer_list timer;
};
struct ath_cycle_counters {
u32 cycles;
u32 rx_busy;
u32 rx_frame;
u32 tx_frame;
};
enum ath_device_state {
ATH_HW_UNAVAILABLE,
ATH_HW_INITIALIZED,
};
enum ath_bus_type {
ATH_PCI,
ATH_AHB,
ATH_USB,
};
struct reg_dmn_pair_mapping {
u16 regDmnEnum;
u16 reg_5ghz_ctl;
u16 reg_2ghz_ctl;
};
struct ath_regulatory {
char alpha2[2];
u16 country_code;
u16 max_power_level;
u32 tp_scale;
u16 current_rd;
u16 current_rd_ext;
int16_t power_limit;
struct reg_dmn_pair_mapping *regpair;
};
enum ath_crypt_caps {
ATH_CRYPT_CAP_CIPHER_AESCCM = BIT(0),
ATH_CRYPT_CAP_MIC_COMBINED = BIT(1),
};
struct ath_keyval {
u8 kv_type;
u8 kv_pad;
u16 kv_len;
u8 kv_val[16]; /* TK */
u8 kv_mic[8]; /* Michael MIC key */
u8 kv_txmic[8]; /* Michael MIC TX key (used only if the hardware
* supports both MIC keys in the same key cache entry;
* in that case, kv_mic is the RX key) */
};
enum ath_cipher {
ATH_CIPHER_WEP = 0,
ATH_CIPHER_AES_OCB = 1,
ATH_CIPHER_AES_CCM = 2,
ATH_CIPHER_CKIP = 3,
ATH_CIPHER_TKIP = 4,
ATH_CIPHER_CLR = 5,
ATH_CIPHER_MIC = 127
};
/**
* struct ath_ops - Register read/write operations
*
* @read: Register read
* @multi_read: Multiple register read
* @write: Register write
* @enable_write_buffer: Enable multiple register writes
* @write_flush: flush buffered register writes and disable buffering
*/
struct ath_ops {
unsigned int (*read)(void *, u32 reg_offset);
void (*multi_read)(void *, u32 *addr, u32 *val, u16 count);
void (*write)(void *, u32 val, u32 reg_offset);
void (*enable_write_buffer)(void *);
void (*write_flush) (void *);
u32 (*rmw)(void *, u32 reg_offset, u32 set, u32 clr);
};
struct ath_common;
struct ath_bus_ops;
struct ath_common {
void *ah;
void *priv;
struct ieee80211_hw *hw;
int debug_mask;
enum ath_device_state state;
struct ath_ani ani;
u16 cachelsz;
u16 curaid;
u8 macaddr[ETH_ALEN];
u8 curbssid[ETH_ALEN];
u8 bssidmask[ETH_ALEN];
u8 tx_chainmask;
u8 rx_chainmask;
u32 rx_bufsize;
u32 keymax;
DECLARE_BITMAP(keymap, ATH_KEYMAX);
DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
enum ath_crypt_caps crypt_caps;
unsigned int clockrate;
spinlock_t cc_lock;
struct ath_cycle_counters cc_ani;
struct ath_cycle_counters cc_survey;
struct ath_regulatory regulatory;
const struct ath_ops *ops;
const struct ath_bus_ops *bus_ops;
bool btcoex_enabled;
};
struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
u32 len,
gfp_t gfp_mask);
void ath_hw_setbssidmask(struct ath_common *common);
void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key);
int ath_key_config(struct ath_common *common,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key);
bool ath_hw_keyreset(struct ath_common *common, u16 entry);
void ath_hw_cycle_counters_update(struct ath_common *common);
int32_t ath_hw_get_listen_time(struct ath_common *common);
extern __attribute__ ((format (printf, 3, 4))) int
ath_printk(const char *level, struct ath_common *common, const char *fmt, ...);
#define ath_emerg(common, fmt, ...) \
ath_printk(KERN_EMERG, common, fmt, ##__VA_ARGS__)
#define ath_alert(common, fmt, ...) \
ath_printk(KERN_ALERT, common, fmt, ##__VA_ARGS__)
#define ath_crit(common, fmt, ...) \
ath_printk(KERN_CRIT, common, fmt, ##__VA_ARGS__)
#define ath_err(common, fmt, ...) \
ath_printk(KERN_ERR, common, fmt, ##__VA_ARGS__)
#define ath_warn(common, fmt, ...) \
ath_printk(KERN_WARNING, common, fmt, ##__VA_ARGS__)
#define ath_notice(common, fmt, ...) \
ath_printk(KERN_NOTICE, common, fmt, ##__VA_ARGS__)
#define ath_info(common, fmt, ...) \
ath_printk(KERN_INFO, common, fmt, ##__VA_ARGS__)
/**
* enum ath_debug_level - atheros wireless debug level
*
* @ATH_DBG_RESET: reset processing
* @ATH_DBG_QUEUE: hardware queue management
* @ATH_DBG_EEPROM: eeprom processing
* @ATH_DBG_CALIBRATE: periodic calibration
* @ATH_DBG_INTERRUPT: interrupt processing
* @ATH_DBG_REGULATORY: regulatory processing
* @ATH_DBG_ANI: adaptive noise immunitive processing
* @ATH_DBG_XMIT: basic xmit operation
* @ATH_DBG_BEACON: beacon handling
* @ATH_DBG_CONFIG: configuration of the hardware
* @ATH_DBG_FATAL: fatal errors, this is the default, DBG_DEFAULT
* @ATH_DBG_PS: power save processing
* @ATH_DBG_HWTIMER: hardware timer handling
* @ATH_DBG_BTCOEX: bluetooth coexistance
* @ATH_DBG_BSTUCK: stuck beacons
* @ATH_DBG_ANY: enable all debugging
*
* The debug level is used to control the amount and type of debugging output
* we want to see. Each driver has its own method for enabling debugging and
* modifying debug level states -- but this is typically done through a
* module parameter 'debug' along with a respective 'debug' debugfs file
* entry.
*/
enum ATH_DEBUG {
ATH_DBG_RESET = 0x00000001,
ATH_DBG_QUEUE = 0x00000002,
ATH_DBG_EEPROM = 0x00000004,
ATH_DBG_CALIBRATE = 0x00000008,
ATH_DBG_INTERRUPT = 0x00000010,
ATH_DBG_REGULATORY = 0x00000020,
ATH_DBG_ANI = 0x00000040,
ATH_DBG_XMIT = 0x00000080,
ATH_DBG_BEACON = 0x00000100,
ATH_DBG_CONFIG = 0x00000200,
ATH_DBG_FATAL = 0x00000400,
ATH_DBG_PS = 0x00000800,
ATH_DBG_HWTIMER = 0x00001000,
ATH_DBG_BTCOEX = 0x00002000,
ATH_DBG_WMI = 0x00004000,
ATH_DBG_BSTUCK = 0x00008000,
ATH_DBG_ANY = 0xffffffff
};
#define ATH_DBG_DEFAULT (ATH_DBG_FATAL)
#ifdef CONFIG_ATH_DEBUG
#define ath_dbg(common, dbg_mask, fmt, ...) \
({ \
int rtn; \
if ((common)->debug_mask & dbg_mask) \
rtn = ath_printk(KERN_DEBUG, common, fmt, \
##__VA_ARGS__); \
else \
rtn = 0; \
\
rtn; \
})
#define ATH_DBG_WARN(foo, arg...) WARN(foo, arg)
#define ATH_DBG_WARN_ON_ONCE(foo) WARN_ON_ONCE(foo)
#else
static inline __attribute__ ((format (printf, 3, 4))) int
ath_dbg(struct ath_common *common, enum ATH_DEBUG dbg_mask,
const char *fmt, ...)
{
return 0;
}
#define ATH_DBG_WARN(foo, arg...) do {} while (0)
#define ATH_DBG_WARN_ON_ONCE(foo) ({ \
int __ret_warn_once = !!(foo); \
unlikely(__ret_warn_once); \
})
#endif /* CONFIG_ATH_DEBUG */
/** Returns string describing opmode, or NULL if unknown mode. */
#ifdef CONFIG_ATH_DEBUG
const char *ath_opmode_to_string(enum nl80211_iftype opmode);
#else
static inline const char *ath_opmode_to_string(enum nl80211_iftype opmode)
{
return "UNKNOWN";
}
#endif
#endif /* ATH_H */