linux/arch/mn10300/mm/Kconfig.cache
David Howells 7f386ac327 MN10300: Create general kernel debugger cache flushing
Create general kernel debugger cache flushing for MN10300 and get rid of the
old stuff that gdbstub was using.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:30 +00:00

147 lines
4.5 KiB
Text

#
# MN10300 CPU cache options
#
choice
prompt "CPU Caching mode"
default MN10300_CACHE_WBACK
help
This option determines the caching mode for the kernel.
Write-Back caching mode involves the all reads and writes causing
the affected cacheline to be read into the cache first before being
operated upon. Memory is not then updated by a write until the cache
is filled and a cacheline needs to be displaced from the cache to
make room. Only at that point is it written back.
Write-Through caching only fetches cachelines from memory on a
read. Writes always get written directly to memory. If the affected
cacheline is also in cache, it will be updated too.
The final option is to turn of caching entirely.
config MN10300_CACHE_WBACK
bool "Write-Back"
help
The dcache operates in delayed write-back mode. It must be manually
flushed if writes are made that subsequently need to be executed or
to be DMA'd by a device.
config MN10300_CACHE_WTHRU
bool "Write-Through"
help
The dcache operates in immediate write-through mode. Writes are
committed to RAM immediately in addition to being stored in the
cache. This means that the written data is immediately available for
execution or DMA.
This is not available for use with an SMP kernel if cache flushing
and invalidation by automatic purge register is not selected.
config MN10300_CACHE_DISABLED
bool "Disabled"
help
The icache and dcache are disabled.
endchoice
config MN10300_CACHE_ENABLED
def_bool y if !MN10300_CACHE_DISABLED
choice
prompt "CPU cache flush/invalidate method"
default MN10300_CACHE_MANAGE_BY_TAG if !AM34_2
default MN10300_CACHE_MANAGE_BY_REG if AM34_2
depends on MN10300_CACHE_ENABLED
help
This determines the method by which CPU cache flushing and
invalidation is performed.
config MN10300_CACHE_MANAGE_BY_TAG
bool "Use the cache tag registers directly"
depends on !(SMP && MN10300_CACHE_WTHRU)
config MN10300_CACHE_MANAGE_BY_REG
bool "Flush areas by way of automatic purge registers (AM34 only)"
depends on AM34_2
endchoice
config MN10300_CACHE_INV_BY_TAG
def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_ENABLED
config MN10300_CACHE_INV_BY_REG
def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_ENABLED
config MN10300_CACHE_FLUSH_BY_TAG
def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_WBACK
config MN10300_CACHE_FLUSH_BY_REG
def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_WBACK
config MN10300_HAS_CACHE_SNOOP
def_bool n
config MN10300_CACHE_SNOOP
bool "Use CPU Cache Snooping"
depends on MN10300_CACHE_ENABLED && MN10300_HAS_CACHE_SNOOP
default y
config MN10300_CACHE_FLUSH_ICACHE
def_bool y if MN10300_CACHE_WBACK && !MN10300_CACHE_SNOOP
help
Set if we need the dcache flushing before the icache is invalidated.
config MN10300_CACHE_INV_ICACHE
def_bool y if MN10300_CACHE_WTHRU && !MN10300_CACHE_SNOOP
help
Set if we need the icache to be invalidated, even if the dcache is in
write-through mode and doesn't need flushing.
#
# The kernel debugger gets its own separate cache flushing functions
#
config MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG
def_bool y if KERNEL_DEBUGGER && \
MN10300_CACHE_WBACK && \
!MN10300_CACHE_SNOOP && \
MN10300_CACHE_MANAGE_BY_TAG
help
Set if the debugger needs to flush the dcache and invalidate the
icache using the cache tag registers to make breakpoints work.
config MN10300_DEBUGGER_CACHE_FLUSH_BY_REG
def_bool y if KERNEL_DEBUGGER && \
MN10300_CACHE_WBACK && \
!MN10300_CACHE_SNOOP && \
MN10300_CACHE_MANAGE_BY_REG
help
Set if the debugger needs to flush the dcache and invalidate the
icache using automatic purge registers to make breakpoints work.
config MN10300_DEBUGGER_CACHE_INV_BY_TAG
def_bool y if KERNEL_DEBUGGER && \
MN10300_CACHE_WTHRU && \
!MN10300_CACHE_SNOOP && \
MN10300_CACHE_MANAGE_BY_TAG
help
Set if the debugger needs to invalidate the icache using the cache
tag registers to make breakpoints work.
config MN10300_DEBUGGER_CACHE_INV_BY_REG
def_bool y if KERNEL_DEBUGGER && \
MN10300_CACHE_WTHRU && \
!MN10300_CACHE_SNOOP && \
MN10300_CACHE_MANAGE_BY_REG
help
Set if the debugger needs to invalidate the icache using automatic
purge registers to make breakpoints work.
config MN10300_DEBUGGER_CACHE_NO_FLUSH
def_bool y if KERNEL_DEBUGGER && \
(MN10300_CACHE_DISABLED || MN10300_CACHE_SNOOP)
help
Set if the debugger does not need to flush the dcache and/or
invalidate the icache to make breakpoints work.