fb1d9be596
This moves the double fault data used at boot time into a single struct which can then easily be addressed with indexed loads rather than having to explicitly load multiple addresses. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
231 lines
4.9 KiB
ArmAsm
231 lines
4.9 KiB
ArmAsm
/*
|
|
* Common Blackfin startup code
|
|
*
|
|
* Copyright 2004-2008 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/blackfin.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/trace.h>
|
|
#include <asm/asm-offsets.h>
|
|
|
|
__INIT
|
|
|
|
ENTRY(__init_clear_bss)
|
|
r2 = r2 - r1;
|
|
cc = r2 == 0;
|
|
if cc jump .L_bss_done;
|
|
r2 >>= 2;
|
|
p1 = r1;
|
|
p2 = r2;
|
|
lsetup (1f, 1f) lc0 = p2;
|
|
1: [p1++] = r0;
|
|
.L_bss_done:
|
|
rts;
|
|
ENDPROC(__init_clear_bss)
|
|
|
|
ENTRY(__start)
|
|
/* R0: argument of command line string, passed from uboot, save it */
|
|
R7 = R0;
|
|
|
|
/* Enable Cycle Counter and Nesting Of Interrupts */
|
|
#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
|
|
R0 = SYSCFG_SNEN;
|
|
#else
|
|
R0 = SYSCFG_SNEN | SYSCFG_CCEN;
|
|
#endif
|
|
SYSCFG = R0;
|
|
|
|
/* Optimization register tricks: keep a base value in the
|
|
* reserved P registers so we use the load/store with an
|
|
* offset syntax. R0 = [P5 + <constant>];
|
|
* P5 - core MMR base
|
|
* R6 - 0
|
|
*/
|
|
r6 = 0;
|
|
p5.l = 0;
|
|
p5.h = hi(COREMMR_BASE);
|
|
|
|
/* Zero out registers required by Blackfin ABI */
|
|
|
|
/* Disable circular buffers */
|
|
L0 = r6;
|
|
L1 = r6;
|
|
L2 = r6;
|
|
L3 = r6;
|
|
|
|
/* Disable hardware loops in case we were started by 'go' */
|
|
LC0 = r6;
|
|
LC1 = r6;
|
|
|
|
/*
|
|
* Clear ITEST_COMMAND and DTEST_COMMAND registers,
|
|
* Leaving these as non-zero can confuse the emulator
|
|
*/
|
|
[p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6;
|
|
[p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6;
|
|
CSYNC;
|
|
|
|
trace_buffer_init(p0,r0);
|
|
|
|
/* Turn off the icache */
|
|
r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)];
|
|
BITCLR (r1, ENICPLB_P);
|
|
[p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1;
|
|
SSYNC;
|
|
|
|
/* Turn off the dcache */
|
|
r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)];
|
|
BITCLR (r1, ENDCPLB_P);
|
|
[p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1;
|
|
SSYNC;
|
|
|
|
/* in case of double faults, save a few things */
|
|
p1.l = _initial_pda;
|
|
p1.h = _initial_pda;
|
|
r4 = RETX;
|
|
#ifdef CONFIG_DEBUG_DOUBLEFAULT
|
|
/* Only save these if we are storing them,
|
|
* This happens here, since L1 gets clobbered
|
|
* below
|
|
*/
|
|
GET_PDA(p0, r0);
|
|
r0 = [p0 + PDA_DF_RETX];
|
|
r1 = [p0 + PDA_DF_DCPLB];
|
|
r2 = [p0 + PDA_DF_ICPLB];
|
|
r3 = [p0 + PDA_DF_SEQSTAT];
|
|
[p1 + PDA_INIT_DF_RETX] = r0;
|
|
[p1 + PDA_INIT_DF_DCPLB] = r1;
|
|
[p1 + PDA_INIT_DF_ICPLB] = r2;
|
|
[p1 + PDA_INIT_DF_SEQSTAT] = r3;
|
|
#endif
|
|
[p1 + PDA_INIT_RETX] = r4;
|
|
|
|
/* Initialize stack pointer */
|
|
sp.l = _init_thread_union + THREAD_SIZE;
|
|
sp.h = _init_thread_union + THREAD_SIZE;
|
|
fp = sp;
|
|
usp = sp;
|
|
|
|
#ifdef CONFIG_EARLY_PRINTK
|
|
call _init_early_exception_vectors;
|
|
r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
|
|
sti r0;
|
|
#endif
|
|
|
|
r0 = r6;
|
|
/* Zero out all of the fun bss regions */
|
|
#if L1_DATA_A_LENGTH > 0
|
|
r1.l = __sbss_l1;
|
|
r1.h = __sbss_l1;
|
|
r2.l = __ebss_l1;
|
|
r2.h = __ebss_l1;
|
|
call __init_clear_bss
|
|
#endif
|
|
#if L1_DATA_B_LENGTH > 0
|
|
r1.l = __sbss_b_l1;
|
|
r1.h = __sbss_b_l1;
|
|
r2.l = __ebss_b_l1;
|
|
r2.h = __ebss_b_l1;
|
|
call __init_clear_bss
|
|
#endif
|
|
#if L2_LENGTH > 0
|
|
r1.l = __sbss_l2;
|
|
r1.h = __sbss_l2;
|
|
r2.l = __ebss_l2;
|
|
r2.h = __ebss_l2;
|
|
call __init_clear_bss
|
|
#endif
|
|
r1.l = ___bss_start;
|
|
r1.h = ___bss_start;
|
|
r2.l = ___bss_stop;
|
|
r2.h = ___bss_stop;
|
|
call __init_clear_bss
|
|
|
|
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
|
|
call _bfin_relocate_l1_mem;
|
|
|
|
#ifdef CONFIG_ROMKERNEL
|
|
call _bfin_relocate_xip_data;
|
|
#endif
|
|
|
|
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
|
/* Only use on-chip scratch space for stack when absolutely required
|
|
* to avoid Anomaly 05000227 ... we know the init_clocks() func only
|
|
* uses L1 text and stack space and no other memory region.
|
|
*/
|
|
# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
|
|
sp.l = lo(KERNEL_CLOCK_STACK);
|
|
sp.h = hi(KERNEL_CLOCK_STACK);
|
|
call _init_clocks;
|
|
sp = usp; /* usp hasn't been touched, so restore from there */
|
|
#endif
|
|
|
|
/* This section keeps the processor in supervisor mode
|
|
* during kernel boot. Switches to user mode at end of boot.
|
|
* See page 3-9 of Hardware Reference manual for documentation.
|
|
*/
|
|
|
|
/* EVT15 = _real_start */
|
|
|
|
p1.l = _real_start;
|
|
p1.h = _real_start;
|
|
[p5 + (EVT15 - COREMMR_BASE)] = p1;
|
|
csync;
|
|
|
|
#ifdef CONFIG_EARLY_PRINTK
|
|
r0 = (EVT_IVG15 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU) (z);
|
|
#else
|
|
r0 = EVT_IVG15 (z);
|
|
#endif
|
|
sti r0;
|
|
|
|
raise 15;
|
|
#ifdef CONFIG_EARLY_PRINTK
|
|
p0.l = _early_trap;
|
|
p0.h = _early_trap;
|
|
#else
|
|
p0.l = .LWAIT_HERE;
|
|
p0.h = .LWAIT_HERE;
|
|
#endif
|
|
reti = p0;
|
|
#if ANOMALY_05000281
|
|
nop; nop; nop;
|
|
#endif
|
|
rti;
|
|
|
|
.LWAIT_HERE:
|
|
jump .LWAIT_HERE;
|
|
ENDPROC(__start)
|
|
|
|
/* A little BF561 glue ... */
|
|
#ifndef WDOG_CTL
|
|
# define WDOG_CTL WDOGA_CTL
|
|
#endif
|
|
|
|
ENTRY(_real_start)
|
|
/* Enable nested interrupts */
|
|
[--sp] = reti;
|
|
|
|
/* watchdog off for now */
|
|
p0.l = lo(WDOG_CTL);
|
|
p0.h = hi(WDOG_CTL);
|
|
r0 = 0xAD6(z);
|
|
w[p0] = r0;
|
|
ssync;
|
|
|
|
/* Pass the u-boot arguments to the global value command line */
|
|
R0 = R7;
|
|
call _cmdline_init;
|
|
|
|
sp += -12 + 4; /* +4 is for reti loading above */
|
|
call _init_pda
|
|
sp += 12;
|
|
jump.l _start_kernel;
|
|
ENDPROC(_real_start)
|
|
|
|
__FINIT
|