linux/include/asm-powerpc/qe.h
Timur Tabi bc556ba940 [POWERPC] QE: Add ability to upload QE firmware
Define the layout of a binary blob that contains a QE firmware and instructions
on how to upload it.  Add function qe_upload_firmware() to parse the blob
and perform the actual upload.  Fully define 'struct rsp' in immap_qe.h to
include the actual RISC Special Registers.  Added description of a new
QE firmware node to booting-without-of.txt.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:06 -06:00

610 lines
21 KiB
C

/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* Description:
* QUICC Engine (QE) external definitions and structure.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _ASM_POWERPC_QE_H
#define _ASM_POWERPC_QE_H
#ifdef __KERNEL__
#include <asm/immap_qe.h>
#define QE_NUM_OF_SNUM 28
#define QE_NUM_OF_BRGS 16
#define QE_NUM_OF_PORTS 1024
/* Memory partitions
*/
#define MEM_PART_SYSTEM 0
#define MEM_PART_SECONDARY 1
#define MEM_PART_MURAM 2
/* Clocks and BRGs */
enum qe_clock {
QE_CLK_NONE = 0,
QE_BRG1, /* Baud Rate Generator 1 */
QE_BRG2, /* Baud Rate Generator 2 */
QE_BRG3, /* Baud Rate Generator 3 */
QE_BRG4, /* Baud Rate Generator 4 */
QE_BRG5, /* Baud Rate Generator 5 */
QE_BRG6, /* Baud Rate Generator 6 */
QE_BRG7, /* Baud Rate Generator 7 */
QE_BRG8, /* Baud Rate Generator 8 */
QE_BRG9, /* Baud Rate Generator 9 */
QE_BRG10, /* Baud Rate Generator 10 */
QE_BRG11, /* Baud Rate Generator 11 */
QE_BRG12, /* Baud Rate Generator 12 */
QE_BRG13, /* Baud Rate Generator 13 */
QE_BRG14, /* Baud Rate Generator 14 */
QE_BRG15, /* Baud Rate Generator 15 */
QE_BRG16, /* Baud Rate Generator 16 */
QE_CLK1, /* Clock 1 */
QE_CLK2, /* Clock 2 */
QE_CLK3, /* Clock 3 */
QE_CLK4, /* Clock 4 */
QE_CLK5, /* Clock 5 */
QE_CLK6, /* Clock 6 */
QE_CLK7, /* Clock 7 */
QE_CLK8, /* Clock 8 */
QE_CLK9, /* Clock 9 */
QE_CLK10, /* Clock 10 */
QE_CLK11, /* Clock 11 */
QE_CLK12, /* Clock 12 */
QE_CLK13, /* Clock 13 */
QE_CLK14, /* Clock 14 */
QE_CLK15, /* Clock 15 */
QE_CLK16, /* Clock 16 */
QE_CLK17, /* Clock 17 */
QE_CLK18, /* Clock 18 */
QE_CLK19, /* Clock 19 */
QE_CLK20, /* Clock 20 */
QE_CLK21, /* Clock 21 */
QE_CLK22, /* Clock 22 */
QE_CLK23, /* Clock 23 */
QE_CLK24, /* Clock 24 */
QE_CLK_DUMMY
};
/* Export QE common operations */
extern void qe_reset(void);
extern int par_io_init(struct device_node *np);
extern int par_io_of_config(struct device_node *np);
extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
int assignment, int has_irq);
extern int par_io_data_set(u8 port, u8 pin, u8 val);
/* QE internal API */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
enum qe_clock qe_clock_source(const char *source);
int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
unsigned long qe_muram_alloc(int size, int align);
int qe_muram_free(unsigned long offset);
unsigned long qe_muram_alloc_fixed(unsigned long offset, int size);
void qe_muram_dump(void);
void *qe_muram_addr(unsigned long offset);
/* Structure that defines QE firmware binary files.
*
* See Documentation/powerpc/qe-firmware.txt for a description of these
* fields.
*/
struct qe_firmware {
struct qe_header {
__be32 length; /* Length of the entire structure, in bytes */
u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
u8 version; /* Version of this layout. First ver is '1' */
} header;
u8 id[62]; /* Null-terminated identifier string */
u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
u8 count; /* Number of microcode[] structures */
struct {
__be16 model; /* The SOC model */
u8 major; /* The SOC revision major */
u8 minor; /* The SOC revision minor */
} __attribute__ ((packed)) soc;
u8 padding[4]; /* Reserved, for alignment */
__be64 extended_modes; /* Extended modes */
__be32 vtraps[8]; /* Virtual trap addresses */
u8 reserved[4]; /* Reserved, for future expansion */
struct qe_microcode {
u8 id[32]; /* Null-terminated identifier */
__be32 traps[16]; /* Trap addresses, 0 == ignore */
__be32 eccr; /* The value for the ECCR register */
__be32 iram_offset; /* Offset into I-RAM for the code */
__be32 count; /* Number of 32-bit words of the code */
__be32 code_offset; /* Offset of the actual microcode */
u8 major; /* The microcode version major */
u8 minor; /* The microcode version minor */
u8 revision; /* The microcode version revision */
u8 padding; /* Reserved, for alignment */
u8 reserved[4]; /* Reserved, for future expansion */
} __attribute__ ((packed)) microcode[1];
/* All microcode binaries should be located here */
/* CRC32 should be located here, after the microcode binaries */
} __attribute__ ((packed));
struct qe_firmware_info {
char id[64]; /* Firmware name */
u32 vtraps[8]; /* Virtual trap addresses */
u64 extended_modes; /* Extended modes */
};
/* Upload a firmware to the QE */
int qe_upload_firmware(const struct qe_firmware *firmware);
/* Obtain information on the uploaded firmware */
struct qe_firmware_info *qe_get_firmware_info(void);
/* Buffer descriptors */
struct qe_bd {
__be16 status;
__be16 length;
__be32 buf;
} __attribute__ ((packed));
#define BD_STATUS_MASK 0xffff0000
#define BD_LENGTH_MASK 0x0000ffff
#define BD_SC_EMPTY 0x8000 /* Receive is empty */
#define BD_SC_READY 0x8000 /* Transmit is ready */
#define BD_SC_WRAP 0x2000 /* Last buffer descriptor */
#define BD_SC_INTRPT 0x1000 /* Interrupt on change */
#define BD_SC_LAST 0x0800 /* Last buffer in frame */
#define BD_SC_CM 0x0200 /* Continous mode */
#define BD_SC_ID 0x0100 /* Rec'd too many idles */
#define BD_SC_P 0x0100 /* xmt preamble */
#define BD_SC_BR 0x0020 /* Break received */
#define BD_SC_FR 0x0010 /* Framing error */
#define BD_SC_PR 0x0008 /* Parity error */
#define BD_SC_OV 0x0002 /* Overrun */
#define BD_SC_CD 0x0001 /* ?? */
/* Alignment */
#define QE_INTR_TABLE_ALIGN 16 /* ??? */
#define QE_ALIGNMENT_OF_BD 8
#define QE_ALIGNMENT_OF_PRAM 64
/* RISC allocation */
enum qe_risc_allocation {
QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose
RISC 1 or RISC 2 */
};
/* QE extended filtering Table Lookup Key Size */
enum qe_fltr_tbl_lookup_key_size {
QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
= 0x3f, /* LookupKey parsed by the Generate LookupKey
CMD is truncated to 8 bytes */
QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
= 0x5f, /* LookupKey parsed by the Generate LookupKey
CMD is truncated to 16 bytes */
};
/* QE FLTR extended filtering Largest External Table Lookup Key Size */
enum qe_fltr_largest_external_tbl_lookup_key_size {
QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
= 0x0,/* not used */
QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
};
/* structure representing QE parameter RAM */
struct qe_timer_tables {
u16 tm_base; /* QE timer table base adr */
u16 tm_ptr; /* QE timer table pointer */
u16 r_tmr; /* QE timer mode register */
u16 r_tmv; /* QE timer valid register */
u32 tm_cmd; /* QE timer cmd register */
u32 tm_cnt; /* QE timer internal cnt */
} __attribute__ ((packed));
#define QE_FLTR_TAD_SIZE 8
/* QE extended filtering Termination Action Descriptor (TAD) */
struct qe_fltr_tad {
u8 serialized[QE_FLTR_TAD_SIZE];
} __attribute__ ((packed));
/* Communication Direction */
enum comm_dir {
COMM_DIR_NONE = 0,
COMM_DIR_RX = 1,
COMM_DIR_TX = 2,
COMM_DIR_RX_AND_TX = 3
};
/* QE CMXUCR Registers.
* There are two UCCs represented in each of the four CMXUCR registers.
* These values are for the UCC in the LSBs
*/
#define QE_CMXUCR_MII_ENET_MNG 0x00007000
#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
#define QE_CMXUCR_GRANT 0x00008000
#define QE_CMXUCR_TSA 0x00004000
#define QE_CMXUCR_BKPT 0x00000100
#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
/* QE CMXGCR Registers.
*/
#define QE_CMXGCR_MII_ENET_MNG 0x00007000
#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
#define QE_CMXGCR_USBCS 0x0000000f
/* QE CECR Commands.
*/
#define QE_CR_FLG 0x00010000
#define QE_RESET 0x80000000
#define QE_INIT_TX_RX 0x00000000
#define QE_INIT_RX 0x00000001
#define QE_INIT_TX 0x00000002
#define QE_ENTER_HUNT_MODE 0x00000003
#define QE_STOP_TX 0x00000004
#define QE_GRACEFUL_STOP_TX 0x00000005
#define QE_RESTART_TX 0x00000006
#define QE_CLOSE_RX_BD 0x00000007
#define QE_SWITCH_COMMAND 0x00000007
#define QE_SET_GROUP_ADDRESS 0x00000008
#define QE_START_IDMA 0x00000009
#define QE_MCC_STOP_RX 0x00000009
#define QE_ATM_TRANSMIT 0x0000000a
#define QE_HPAC_CLEAR_ALL 0x0000000b
#define QE_GRACEFUL_STOP_RX 0x0000001a
#define QE_RESTART_RX 0x0000001b
#define QE_HPAC_SET_PRIORITY 0x0000010b
#define QE_HPAC_STOP_TX 0x0000020b
#define QE_HPAC_STOP_RX 0x0000030b
#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
#define QE_HPAC_START_TX 0x0000060b
#define QE_HPAC_START_RX 0x0000070b
#define QE_USB_STOP_TX 0x0000000a
#define QE_USB_RESTART_TX 0x0000000b
#define QE_QMC_STOP_TX 0x0000000c
#define QE_QMC_STOP_RX 0x0000000d
#define QE_SS7_SU_FIL_RESET 0x0000000e
/* jonathbr added from here down for 83xx */
#define QE_RESET_BCS 0x0000000a
#define QE_MCC_INIT_TX_RX_16 0x00000003
#define QE_MCC_STOP_TX 0x00000004
#define QE_MCC_INIT_TX_1 0x00000005
#define QE_MCC_INIT_RX_1 0x00000006
#define QE_MCC_RESET 0x00000007
#define QE_SET_TIMER 0x00000008
#define QE_RANDOM_NUMBER 0x0000000c
#define QE_ATM_MULTI_THREAD_INIT 0x00000011
#define QE_ASSIGN_PAGE 0x00000012
#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
#define QE_START_FLOW_CONTROL 0x00000014
#define QE_STOP_FLOW_CONTROL 0x00000015
#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
#define QE_ASSIGN_RISC 0x00000010
#define QE_CR_MCN_NORMAL_SHIFT 6
#define QE_CR_MCN_USB_SHIFT 4
#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
#define QE_CR_SNUM_SHIFT 17
/* QE CECR Sub Block - sub block of QE command.
*/
#define QE_CR_SUBBLOCK_INVALID 0x00000000
#define QE_CR_SUBBLOCK_USB 0x03200000
#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
#define QE_CR_SUBBLOCK_MCC1 0x03800000
#define QE_CR_SUBBLOCK_MCC2 0x03a00000
#define QE_CR_SUBBLOCK_MCC3 0x03000000
#define QE_CR_SUBBLOCK_IDMA1 0x02800000
#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
#define QE_CR_SUBBLOCK_HPAC 0x01e00000
#define QE_CR_SUBBLOCK_SPI1 0x01400000
#define QE_CR_SUBBLOCK_SPI2 0x01600000
#define QE_CR_SUBBLOCK_RAND 0x01c00000
#define QE_CR_SUBBLOCK_TIMER 0x01e00000
#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
#define QE_CR_PROTOCOL_QMC 0x02
#define QE_CR_PROTOCOL_UART 0x04
#define QE_CR_PROTOCOL_ATM_POS 0x0A
#define QE_CR_PROTOCOL_ETHERNET 0x0C
#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
/* BRG configuration register */
#define QE_BRGC_ENABLE 0x00010000
#define QE_BRGC_DIVISOR_SHIFT 1
#define QE_BRGC_DIVISOR_MAX 0xFFF
#define QE_BRGC_DIV16 1
/* QE Timers registers */
#define QE_GTCFR1_PCAS 0x80
#define QE_GTCFR1_STP2 0x20
#define QE_GTCFR1_RST2 0x10
#define QE_GTCFR1_GM2 0x08
#define QE_GTCFR1_GM1 0x04
#define QE_GTCFR1_STP1 0x02
#define QE_GTCFR1_RST1 0x01
/* SDMA registers */
#define QE_SDSR_BER1 0x02000000
#define QE_SDSR_BER2 0x01000000
#define QE_SDMR_GLB_1_MSK 0x80000000
#define QE_SDMR_ADR_SEL 0x20000000
#define QE_SDMR_BER1_MSK 0x02000000
#define QE_SDMR_BER2_MSK 0x01000000
#define QE_SDMR_EB1_MSK 0x00800000
#define QE_SDMR_ER1_MSK 0x00080000
#define QE_SDMR_ER2_MSK 0x00040000
#define QE_SDMR_CEN_MASK 0x0000E000
#define QE_SDMR_SBER_1 0x00000200
#define QE_SDMR_SBER_2 0x00000200
#define QE_SDMR_EB1_PR_MASK 0x000000C0
#define QE_SDMR_ER1_PR 0x00000008
#define QE_SDMR_CEN_SHIFT 13
#define QE_SDMR_EB1_PR_SHIFT 6
#define QE_SDTM_MSNUM_SHIFT 24
#define QE_SDEBCR_BA_MASK 0x01FFFFFF
/* Communication Processor */
#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
/* I-RAM */
#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
/* UPC */
#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
/* UCC GUEMR register */
#define UCC_GUEMR_MODE_MASK_RX 0x02
#define UCC_GUEMR_MODE_FAST_RX 0x02
#define UCC_GUEMR_MODE_SLOW_RX 0x00
#define UCC_GUEMR_MODE_MASK_TX 0x01
#define UCC_GUEMR_MODE_FAST_TX 0x01
#define UCC_GUEMR_MODE_SLOW_TX 0x00
#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
must be set 1 */
/* structure representing UCC SLOW parameter RAM */
struct ucc_slow_pram {
__be16 rbase; /* RX BD base address */
__be16 tbase; /* TX BD base address */
u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */
u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */
__be16 mrblr; /* Rx buffer length */
__be32 rstate; /* Rx internal state */
__be32 rptr; /* Rx internal data pointer */
__be16 rbptr; /* rb BD Pointer */
__be16 rcount; /* Rx internal byte count */
__be32 rtemp; /* Rx temp */
__be32 tstate; /* Tx internal state */
__be32 tptr; /* Tx internal data pointer */
__be16 tbptr; /* Tx BD pointer */
__be16 tcount; /* Tx byte count */
__be32 ttemp; /* Tx temp */
__be32 rcrc; /* temp receive CRC */
__be32 tcrc; /* temp transmit CRC */
} __attribute__ ((packed));
/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000
#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000
#define UCC_SLOW_GUMR_H_REVD 0x00002000
#define UCC_SLOW_GUMR_H_TRX 0x00001000
#define UCC_SLOW_GUMR_H_TTX 0x00000800
#define UCC_SLOW_GUMR_H_CDP 0x00000400
#define UCC_SLOW_GUMR_H_CTSP 0x00000200
#define UCC_SLOW_GUMR_H_CDS 0x00000100
#define UCC_SLOW_GUMR_H_CTSS 0x00000080
#define UCC_SLOW_GUMR_H_TFL 0x00000040
#define UCC_SLOW_GUMR_H_RFW 0x00000020
#define UCC_SLOW_GUMR_H_TXSY 0x00000010
#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
#define UCC_SLOW_GUMR_H_RTSM 0x00000002
#define UCC_SLOW_GUMR_H_RSYN 0x00000001
#define UCC_SLOW_GUMR_L_TCI 0x10000000
#define UCC_SLOW_GUMR_L_RINV 0x02000000
#define UCC_SLOW_GUMR_L_TINV 0x01000000
#define UCC_SLOW_GUMR_L_TEND 0x00040000
#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000
#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000
#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000
#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000
#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000
#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000
#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000
#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000
#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000
#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000
#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800
#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000
#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100
#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000
#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0
#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0
#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080
#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040
#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000
#define UCC_SLOW_GUMR_L_ENR 0x00000020
#define UCC_SLOW_GUMR_L_ENT 0x00000010
#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F
#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008
#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006
#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004
#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002
/* General UCC FAST Mode Register */
#define UCC_FAST_GUMR_TCI 0x20000000
#define UCC_FAST_GUMR_TRX 0x10000000
#define UCC_FAST_GUMR_TTX 0x08000000
#define UCC_FAST_GUMR_CDP 0x04000000
#define UCC_FAST_GUMR_CTSP 0x02000000
#define UCC_FAST_GUMR_CDS 0x01000000
#define UCC_FAST_GUMR_CTSS 0x00800000
#define UCC_FAST_GUMR_TXSY 0x00020000
#define UCC_FAST_GUMR_RSYN 0x00010000
#define UCC_FAST_GUMR_RTSM 0x00002000
#define UCC_FAST_GUMR_REVD 0x00000400
#define UCC_FAST_GUMR_ENR 0x00000020
#define UCC_FAST_GUMR_ENT 0x00000010
/* UART Slow UCC Event Register (UCCE) */
#define UCC_UART_UCCE_AB 0x0200
#define UCC_UART_UCCE_IDLE 0x0100
#define UCC_UART_UCCE_GRA 0x0080
#define UCC_UART_UCCE_BRKE 0x0040
#define UCC_UART_UCCE_BRKS 0x0020
#define UCC_UART_UCCE_CCR 0x0008
#define UCC_UART_UCCE_BSY 0x0004
#define UCC_UART_UCCE_TX 0x0002
#define UCC_UART_UCCE_RX 0x0001
/* HDLC Slow UCC Event Register (UCCE) */
#define UCC_HDLC_UCCE_GLR 0x1000
#define UCC_HDLC_UCCE_GLT 0x0800
#define UCC_HDLC_UCCE_IDLE 0x0100
#define UCC_HDLC_UCCE_BRKE 0x0040
#define UCC_HDLC_UCCE_BRKS 0x0020
#define UCC_HDLC_UCCE_TXE 0x0010
#define UCC_HDLC_UCCE_RXF 0x0008
#define UCC_HDLC_UCCE_BSY 0x0004
#define UCC_HDLC_UCCE_TXB 0x0002
#define UCC_HDLC_UCCE_RXB 0x0001
/* BISYNC Slow UCC Event Register (UCCE) */
#define UCC_BISYNC_UCCE_GRA 0x0080
#define UCC_BISYNC_UCCE_TXE 0x0010
#define UCC_BISYNC_UCCE_RCH 0x0008
#define UCC_BISYNC_UCCE_BSY 0x0004
#define UCC_BISYNC_UCCE_TXB 0x0002
#define UCC_BISYNC_UCCE_RXB 0x0001
/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
#define UCC_GETH_UCCE_MPD 0x80000000
#define UCC_GETH_UCCE_SCAR 0x40000000
#define UCC_GETH_UCCE_GRA 0x20000000
#define UCC_GETH_UCCE_CBPR 0x10000000
#define UCC_GETH_UCCE_BSY 0x08000000
#define UCC_GETH_UCCE_RXC 0x04000000
#define UCC_GETH_UCCE_TXC 0x02000000
#define UCC_GETH_UCCE_TXE 0x01000000
#define UCC_GETH_UCCE_TXB7 0x00800000
#define UCC_GETH_UCCE_TXB6 0x00400000
#define UCC_GETH_UCCE_TXB5 0x00200000
#define UCC_GETH_UCCE_TXB4 0x00100000
#define UCC_GETH_UCCE_TXB3 0x00080000
#define UCC_GETH_UCCE_TXB2 0x00040000
#define UCC_GETH_UCCE_TXB1 0x00020000
#define UCC_GETH_UCCE_TXB0 0x00010000
#define UCC_GETH_UCCE_RXB7 0x00008000
#define UCC_GETH_UCCE_RXB6 0x00004000
#define UCC_GETH_UCCE_RXB5 0x00002000
#define UCC_GETH_UCCE_RXB4 0x00001000
#define UCC_GETH_UCCE_RXB3 0x00000800
#define UCC_GETH_UCCE_RXB2 0x00000400
#define UCC_GETH_UCCE_RXB1 0x00000200
#define UCC_GETH_UCCE_RXB0 0x00000100
#define UCC_GETH_UCCE_RXF7 0x00000080
#define UCC_GETH_UCCE_RXF6 0x00000040
#define UCC_GETH_UCCE_RXF5 0x00000020
#define UCC_GETH_UCCE_RXF4 0x00000010
#define UCC_GETH_UCCE_RXF3 0x00000008
#define UCC_GETH_UCCE_RXF2 0x00000004
#define UCC_GETH_UCCE_RXF1 0x00000002
#define UCC_GETH_UCCE_RXF0 0x00000001
/* UPSMR, when used as a UART */
#define UCC_UART_UPSMR_FLC 0x8000
#define UCC_UART_UPSMR_SL 0x4000
#define UCC_UART_UPSMR_CL_MASK 0x3000
#define UCC_UART_UPSMR_CL_8 0x3000
#define UCC_UART_UPSMR_CL_7 0x2000
#define UCC_UART_UPSMR_CL_6 0x1000
#define UCC_UART_UPSMR_CL_5 0x0000
#define UCC_UART_UPSMR_UM_MASK 0x0c00
#define UCC_UART_UPSMR_UM_NORMAL 0x0000
#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400
#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00
#define UCC_UART_UPSMR_FRZ 0x0200
#define UCC_UART_UPSMR_RZS 0x0100
#define UCC_UART_UPSMR_SYN 0x0080
#define UCC_UART_UPSMR_DRT 0x0040
#define UCC_UART_UPSMR_PEN 0x0010
#define UCC_UART_UPSMR_RPM_MASK 0x000c
#define UCC_UART_UPSMR_RPM_ODD 0x0000
#define UCC_UART_UPSMR_RPM_LOW 0x0004
#define UCC_UART_UPSMR_RPM_EVEN 0x0008
#define UCC_UART_UPSMR_RPM_HIGH 0x000C
#define UCC_UART_UPSMR_TPM_MASK 0x0003
#define UCC_UART_UPSMR_TPM_ODD 0x0000
#define UCC_UART_UPSMR_TPM_LOW 0x0001
#define UCC_UART_UPSMR_TPM_EVEN 0x0002
#define UCC_UART_UPSMR_TPM_HIGH 0x0003
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
#define UCC_FAST_TOD 0x8000
/* UCC Bus Mode Register masks */
/* Not to be confused with the Bundle Mode Register */
#define UCC_BMR_GBL 0x20
#define UCC_BMR_BO_BE 0x10
#define UCC_BMR_CETM 0x04
#define UCC_BMR_DTB 0x02
#define UCC_BMR_BDB 0x01
/* Function code masks */
#define FC_GBL 0x20
#define FC_DTB_LCL 0x02
#define UCC_FAST_FUNCTION_CODE_GBL 0x20
#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_QE_H */