John Fastabend 1f4a0244ff ixgbe: DCB, PFC not cleared until reset occurs ... The PFC configuration is not cleared until the device is reset. This has not been a problem because setting DCB attributes forced a hardware reset. Now that we no longer require this reset to occur PFC remains configured even after being disabled until the device is reset. This removes a goto in the PFC hardware set routines for 82598 and 82599 devices that was short circuiting the clear. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2011-03-12 04:15:35 -08:00
..
ixgbe.h	ixgbe: add support for VF Transmit rate limit using iproute2	2011-03-12 04:15:08 -08:00
ixgbe_82598.c	ixgbe: update PHY code to support 100Mbps as well as 1G/10G	2011-03-12 04:14:01 -08:00
ixgbe_82599.c
ixgbe_common.c
ixgbe_common.h
ixgbe_dcb.c	ixgbe: DCB, set minimum bandwidth per traffic class	2011-03-12 04:14:48 -08:00
ixgbe_dcb.h
ixgbe_dcb_82598.c	ixgbe: DCB, PFC not cleared until reset occurs	2011-03-12 04:15:35 -08:00
ixgbe_dcb_82598.h
ixgbe_dcb_82599.c	ixgbe: DCB, PFC not cleared until reset occurs	2011-03-12 04:15:35 -08:00
ixgbe_dcb_82599.h
ixgbe_dcb_nl.c
ixgbe_ethtool.c
ixgbe_fcoe.c
ixgbe_fcoe.h
ixgbe_main.c	ixgbe: add support for VF Transmit rate limit using iproute2	2011-03-12 04:15:08 -08:00
ixgbe_mbx.c
ixgbe_mbx.h
ixgbe_phy.c	ixgbe: update PHY code to support 100Mbps as well as 1G/10G	2011-03-12 04:14:01 -08:00
ixgbe_phy.h	ixgbe: update PHY code to support 100Mbps as well as 1G/10G	2011-03-12 04:14:01 -08:00
ixgbe_sriov.c	ixgbe: add support for VF Transmit rate limit using iproute2	2011-03-12 04:15:08 -08:00
ixgbe_sriov.h	ixgbe: add support for VF Transmit rate limit using iproute2	2011-03-12 04:15:08 -08:00
ixgbe_type.h	ixgbe: add support for VF Transmit rate limit using iproute2	2011-03-12 04:15:08 -08:00
ixgbe_x540.c
Makefile