linux/drivers/char/pty.c
Alan Cox c65c9bc3ef tty: rewrite the ldisc locking
There are several pretty much unfixable races in the old ldisc code, especially
with respect to pty behaviour and also to hangup. It's easier to rewrite the
code than simply try and patch it up.

This patch
- splits the ldisc from the tty (so we will be able to refcount it more cleanly
  later)
- introduces a mutex lock for ldisc changing on an active device
- fixes the complete mess that hangup caused
- implements hopefully correct setldisc/close/hangup locking

There are still some problems around pty pairs that have always been there but
at least it is now possible to understand the code and fix further problems.

This fixes the following known bugs
- hang up can leak ldisc references
- hang up may not call open/close on ldisc in a matched way
- pty/tty pairs can deadlock during an ldisc change
- reading the ldisc proc files can cause every ldisc to be loaded

and probably a few other of the mysterious ldisc race reports.

I'm sure it also adds the odd new one.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:01 -07:00

765 lines
20 KiB
C

/*
* linux/drivers/char/pty.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Added support for a Unix98-style ptmx device.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
*
* When reading this code see also fs/devpts. In particular note that the
* driver_data field is used by the devpts side as a binding to the devpts
* inode.
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/fcntl.h>
#include <linux/string.h>
#include <linux/major.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/device.h>
#include <linux/uaccess.h>
#include <linux/bitops.h>
#include <linux/devpts_fs.h>
#include <asm/system.h>
#ifdef CONFIG_UNIX98_PTYS
static struct tty_driver *ptm_driver;
static struct tty_driver *pts_driver;
#endif
static void pty_close(struct tty_struct *tty, struct file *filp)
{
BUG_ON(!tty);
if (tty->driver->subtype == PTY_TYPE_MASTER)
WARN_ON(tty->count > 1);
else {
if (tty->count > 2)
return;
}
wake_up_interruptible(&tty->read_wait);
wake_up_interruptible(&tty->write_wait);
tty->packet = 0;
if (!tty->link)
return;
tty->link->packet = 0;
set_bit(TTY_OTHER_CLOSED, &tty->link->flags);
wake_up_interruptible(&tty->link->read_wait);
wake_up_interruptible(&tty->link->write_wait);
if (tty->driver->subtype == PTY_TYPE_MASTER) {
set_bit(TTY_OTHER_CLOSED, &tty->flags);
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver)
devpts_pty_kill(tty->link);
#endif
tty_vhangup(tty->link);
}
}
/*
* The unthrottle routine is called by the line discipline to signal
* that it can receive more characters. For PTY's, the TTY_THROTTLED
* flag is always set, to force the line discipline to always call the
* unthrottle routine when there are fewer than TTY_THRESHOLD_UNTHROTTLE
* characters in the queue. This is necessary since each time this
* happens, we need to wake up any sleeping processes that could be
* (1) trying to send data to the pty, or (2) waiting in wait_until_sent()
* for the pty buffer to be drained.
*/
static void pty_unthrottle(struct tty_struct *tty)
{
struct tty_struct *o_tty = tty->link;
if (!o_tty)
return;
tty_wakeup(o_tty);
set_bit(TTY_THROTTLED, &tty->flags);
}
/*
* WSH 05/24/97: modified to
* (1) use space in tty->flip instead of a shared temp buffer
* The flip buffers aren't being used for a pty, so there's lots
* of space available. The buffer is protected by a per-pty
* semaphore that should almost never come under contention.
* (2) avoid redundant copying for cases where count >> receive_room
* N.B. Calls from user space may now return an error code instead of
* a count.
*
* FIXME: Our pty_write method is called with our ldisc lock held but
* not our partners. We can't just take the other one blindly without
* risking deadlocks.
*/
static int pty_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct tty_struct *to = tty->link;
int c;
if (!to || tty->stopped)
return 0;
c = to->receive_room;
if (c > count)
c = count;
to->ldisc->ops->receive_buf(to, buf, NULL, c);
return c;
}
static int pty_write_room(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
if (!to || tty->stopped)
return 0;
return to->receive_room;
}
/*
* WSH 05/24/97: Modified for asymmetric MASTER/SLAVE behavior
* The chars_in_buffer() value is used by the ldisc select() function
* to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256).
* The pty driver chars_in_buffer() Master/Slave must behave differently:
*
* The Master side needs to allow typed-ahead commands to accumulate
* while being canonicalized, so we report "our buffer" as empty until
* some threshold is reached, and then report the count. (Any count >
* WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock
* the count returned must be 0 if no canonical data is available to be
* read. (The N_TTY ldisc.chars_in_buffer now knows this.)
*
* The Slave side passes all characters in raw mode to the Master side's
* buffer where they can be read immediately, so in this case we can
* return the true count in the buffer.
*/
static int pty_chars_in_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
int count;
/* We should get the line discipline lock for "tty->link" */
if (!to || !to->ldisc->ops->chars_in_buffer)
return 0;
/* The ldisc must report 0 if no characters available to be read */
count = to->ldisc->ops->chars_in_buffer(to);
if (tty->driver->subtype == PTY_TYPE_SLAVE)
return count;
/* Master side driver ... if the other side's read buffer is less than
* half full, return 0 to allow writers to proceed; otherwise return
* the count. This leaves a comfortable margin to avoid overflow,
* and still allows half a buffer's worth of typed-ahead commands.
*/
return (count < N_TTY_BUF_SIZE/2) ? 0 : count;
}
/* Set the lock flag on a pty */
static int pty_set_lock(struct tty_struct *tty, int __user *arg)
{
int val;
if (get_user(val, arg))
return -EFAULT;
if (val)
set_bit(TTY_PTY_LOCK, &tty->flags);
else
clear_bit(TTY_PTY_LOCK, &tty->flags);
return 0;
}
static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
unsigned long flags;
if (!to)
return;
if (to->ldisc->ops->flush_buffer)
to->ldisc->ops->flush_buffer(to);
if (to->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
wake_up_interruptible(&to->read_wait);
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
}
}
static int pty_open(struct tty_struct *tty, struct file *filp)
{
int retval = -ENODEV;
if (!tty || !tty->link)
goto out;
retval = -EIO;
if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
goto out;
if (test_bit(TTY_PTY_LOCK, &tty->link->flags))
goto out;
if (tty->link->count != 1)
goto out;
clear_bit(TTY_OTHER_CLOSED, &tty->link->flags);
set_bit(TTY_THROTTLED, &tty->flags);
retval = 0;
out:
return retval;
}
static void pty_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
tty->termios->c_cflag &= ~(CSIZE | PARENB);
tty->termios->c_cflag |= (CS8 | CREAD);
}
/**
* pty_do_resize - resize event
* @tty: tty being resized
* @ws: window size being set.
*
* Update the termios variables and send the neccessary signals to
* peform a terminal resize correctly
*/
int pty_resize(struct tty_struct *tty, struct winsize *ws)
{
struct pid *pgrp, *rpgrp;
unsigned long flags;
struct tty_struct *pty = tty->link;
/* For a PTY we need to lock the tty side */
mutex_lock(&tty->termios_mutex);
if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
goto done;
/* Get the PID values and reference them so we can
avoid holding the tty ctrl lock while sending signals.
We need to lock these individually however. */
spin_lock_irqsave(&tty->ctrl_lock, flags);
pgrp = get_pid(tty->pgrp);
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
spin_lock_irqsave(&pty->ctrl_lock, flags);
rpgrp = get_pid(pty->pgrp);
spin_unlock_irqrestore(&pty->ctrl_lock, flags);
if (pgrp)
kill_pgrp(pgrp, SIGWINCH, 1);
if (rpgrp != pgrp && rpgrp)
kill_pgrp(rpgrp, SIGWINCH, 1);
put_pid(pgrp);
put_pid(rpgrp);
tty->winsize = *ws;
pty->winsize = *ws; /* Never used so will go away soon */
done:
mutex_unlock(&tty->termios_mutex);
return 0;
}
static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct tty_struct *o_tty;
int idx = tty->index;
int retval;
o_tty = alloc_tty_struct();
if (!o_tty)
return -ENOMEM;
if (!try_module_get(driver->other->owner)) {
/* This cannot in fact currently happen */
free_tty_struct(o_tty);
return -ENOMEM;
}
initialize_tty_struct(o_tty, driver->other, idx);
/* We always use new tty termios data so we can do this
the easy way .. */
retval = tty_init_termios(tty);
if (retval)
goto free_mem_out;
retval = tty_init_termios(o_tty);
if (retval) {
tty_free_termios(tty);
goto free_mem_out;
}
/*
* Everything allocated ... set up the o_tty structure.
*/
driver->other->ttys[idx] = o_tty;
tty_driver_kref_get(driver->other);
if (driver->subtype == PTY_TYPE_MASTER)
o_tty->count++;
/* Establish the links in both directions */
tty->link = o_tty;
o_tty->link = tty;
tty_driver_kref_get(driver);
tty->count++;
driver->ttys[idx] = tty;
return 0;
free_mem_out:
module_put(o_tty->driver->owner);
free_tty_struct(o_tty);
return -ENOMEM;
}
static const struct tty_operations pty_ops = {
.install = pty_install,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.write_room = pty_write_room,
.flush_buffer = pty_flush_buffer,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.resize = pty_resize
};
/* Traditional BSD devices */
#ifdef CONFIG_LEGACY_PTYS
static struct tty_driver *pty_driver, *pty_slave_driver;
static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
return pty_set_lock(tty, (int __user *) arg);
}
return -ENOIOCTLCMD;
}
static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
module_param(legacy_count, int, 0);
static const struct tty_operations pty_ops_bsd = {
.open = pty_open,
.close = pty_close,
.write = pty_write,
.write_room = pty_write_room,
.flush_buffer = pty_flush_buffer,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.ioctl = pty_bsd_ioctl,
.resize = pty_resize
};
static void __init legacy_pty_init(void)
{
if (legacy_count <= 0)
return;
pty_driver = alloc_tty_driver(legacy_count);
if (!pty_driver)
panic("Couldn't allocate pty driver");
pty_slave_driver = alloc_tty_driver(legacy_count);
if (!pty_slave_driver)
panic("Couldn't allocate pty slave driver");
pty_driver->owner = THIS_MODULE;
pty_driver->driver_name = "pty_master";
pty_driver->name = "pty";
pty_driver->major = PTY_MASTER_MAJOR;
pty_driver->minor_start = 0;
pty_driver->type = TTY_DRIVER_TYPE_PTY;
pty_driver->subtype = PTY_TYPE_MASTER;
pty_driver->init_termios = tty_std_termios;
pty_driver->init_termios.c_iflag = 0;
pty_driver->init_termios.c_oflag = 0;
pty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pty_driver->init_termios.c_lflag = 0;
pty_driver->init_termios.c_ispeed = 38400;
pty_driver->init_termios.c_ospeed = 38400;
pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
pty_driver->other = pty_slave_driver;
tty_set_operations(pty_driver, &pty_ops);
pty_slave_driver->owner = THIS_MODULE;
pty_slave_driver->driver_name = "pty_slave";
pty_slave_driver->name = "ttyp";
pty_slave_driver->major = PTY_SLAVE_MAJOR;
pty_slave_driver->minor_start = 0;
pty_slave_driver->type = TTY_DRIVER_TYPE_PTY;
pty_slave_driver->subtype = PTY_TYPE_SLAVE;
pty_slave_driver->init_termios = tty_std_termios;
pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pty_slave_driver->init_termios.c_ispeed = 38400;
pty_slave_driver->init_termios.c_ospeed = 38400;
pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW;
pty_slave_driver->other = pty_driver;
tty_set_operations(pty_slave_driver, &pty_ops);
if (tty_register_driver(pty_driver))
panic("Couldn't register pty driver");
if (tty_register_driver(pty_slave_driver))
panic("Couldn't register pty slave driver");
}
#else
static inline void legacy_pty_init(void) { }
#endif
/* Unix98 devices */
#ifdef CONFIG_UNIX98_PTYS
/*
* sysctl support for setting limits on the number of Unix98 ptys allocated.
* Otherwise one can eat up all kernel memory by opening /dev/ptmx repeatedly.
*/
int pty_limit = NR_UNIX98_PTY_DEFAULT;
static int pty_limit_min;
static int pty_limit_max = NR_UNIX98_PTY_MAX;
static int pty_count;
static struct cdev ptmx_cdev;
static struct ctl_table pty_table[] = {
{
.ctl_name = PTY_MAX,
.procname = "max",
.maxlen = sizeof(int),
.mode = 0644,
.data = &pty_limit,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &pty_limit_min,
.extra2 = &pty_limit_max,
}, {
.ctl_name = PTY_NR,
.procname = "nr",
.maxlen = sizeof(int),
.mode = 0444,
.data = &pty_count,
.proc_handler = &proc_dointvec,
}, {
.ctl_name = 0
}
};
static struct ctl_table pty_kern_table[] = {
{
.ctl_name = KERN_PTY,
.procname = "pty",
.mode = 0555,
.child = pty_table,
},
{}
};
static struct ctl_table pty_root_table[] = {
{
.ctl_name = CTL_KERN,
.procname = "kernel",
.mode = 0555,
.child = pty_kern_table,
},
{}
};
static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
return pty_set_lock(tty, (int __user *)arg);
case TIOCGPTN: /* Get PT Number */
return put_user(tty->index, (unsigned int __user *)arg);
}
return -ENOIOCTLCMD;
}
/**
* ptm_unix98_lookup - find a pty master
* @driver: ptm driver
* @idx: tty index
*
* Look up a pty master device. Called under the tty_mutex for now.
* This provides our locking.
*/
static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
struct inode *ptm_inode, int idx)
{
struct tty_struct *tty = devpts_get_tty(ptm_inode, idx);
if (tty)
tty = tty->link;
return tty;
}
/**
* pts_unix98_lookup - find a pty slave
* @driver: pts driver
* @idx: tty index
*
* Look up a pty master device. Called under the tty_mutex for now.
* This provides our locking.
*/
static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
struct inode *pts_inode, int idx)
{
struct tty_struct *tty = devpts_get_tty(pts_inode, idx);
/* Master must be open before slave */
if (!tty)
return ERR_PTR(-EIO);
return tty;
}
static void pty_unix98_shutdown(struct tty_struct *tty)
{
/* We have our own method as we don't use the tty index */
kfree(tty->termios);
}
/* We have no need to install and remove our tty objects as devpts does all
the work for us */
static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct tty_struct *o_tty;
int idx = tty->index;
o_tty = alloc_tty_struct();
if (!o_tty)
return -ENOMEM;
if (!try_module_get(driver->other->owner)) {
/* This cannot in fact currently happen */
free_tty_struct(o_tty);
return -ENOMEM;
}
initialize_tty_struct(o_tty, driver->other, idx);
tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
if (tty->termios == NULL)
goto free_mem_out;
*tty->termios = driver->init_termios;
tty->termios_locked = tty->termios + 1;
o_tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
if (o_tty->termios == NULL)
goto free_mem_out;
*o_tty->termios = driver->other->init_termios;
o_tty->termios_locked = o_tty->termios + 1;
tty_driver_kref_get(driver->other);
if (driver->subtype == PTY_TYPE_MASTER)
o_tty->count++;
/* Establish the links in both directions */
tty->link = o_tty;
o_tty->link = tty;
/*
* All structures have been allocated, so now we install them.
* Failures after this point use release_tty to clean up, so
* there's no need to null out the local pointers.
*/
tty_driver_kref_get(driver);
tty->count++;
pty_count++;
return 0;
free_mem_out:
kfree(o_tty->termios);
module_put(o_tty->driver->owner);
free_tty_struct(o_tty);
kfree(tty->termios);
return -ENOMEM;
}
static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
pty_count--;
}
static const struct tty_operations ptm_unix98_ops = {
.lookup = ptm_unix98_lookup,
.install = pty_unix98_install,
.remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.write_room = pty_write_room,
.flush_buffer = pty_flush_buffer,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.ioctl = pty_unix98_ioctl,
.shutdown = pty_unix98_shutdown,
.resize = pty_resize
};
static const struct tty_operations pty_unix98_ops = {
.lookup = pts_unix98_lookup,
.install = pty_unix98_install,
.remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.write_room = pty_write_room,
.flush_buffer = pty_flush_buffer,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.shutdown = pty_unix98_shutdown
};
/**
* ptmx_open - open a unix 98 pty master
* @inode: inode of device file
* @filp: file pointer to tty
*
* Allocate a unix98 pty master device from the ptmx driver.
*
* Locking: tty_mutex protects the init_dev work. tty->count should
* protect the rest.
* allocated_ptys_lock handles the list of free pty numbers
*/
static int __ptmx_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
int retval;
int index;
nonseekable_open(inode, filp);
/* find a device that is not in use. */
index = devpts_new_index(inode);
if (index < 0)
return index;
mutex_lock(&tty_mutex);
tty = tty_init_dev(ptm_driver, index, 1);
mutex_unlock(&tty_mutex);
if (IS_ERR(tty)) {
retval = PTR_ERR(tty);
goto out;
}
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
filp->private_data = tty;
file_move(filp, &tty->tty_files);
retval = devpts_pty_new(inode, tty->link);
if (retval)
goto out1;
retval = ptm_driver->ops->open(tty, filp);
if (!retval)
return 0;
out1:
tty_release_dev(filp);
return retval;
out:
devpts_kill_index(inode, index);
return retval;
}
static int ptmx_open(struct inode *inode, struct file *filp)
{
int ret;
lock_kernel();
ret = __ptmx_open(inode, filp);
unlock_kernel();
return ret;
}
static struct file_operations ptmx_fops;
static void __init unix98_pty_init(void)
{
ptm_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
if (!ptm_driver)
panic("Couldn't allocate Unix98 ptm driver");
pts_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
if (!pts_driver)
panic("Couldn't allocate Unix98 pts driver");
ptm_driver->owner = THIS_MODULE;
ptm_driver->driver_name = "pty_master";
ptm_driver->name = "ptm";
ptm_driver->major = UNIX98_PTY_MASTER_MAJOR;
ptm_driver->minor_start = 0;
ptm_driver->type = TTY_DRIVER_TYPE_PTY;
ptm_driver->subtype = PTY_TYPE_MASTER;
ptm_driver->init_termios = tty_std_termios;
ptm_driver->init_termios.c_iflag = 0;
ptm_driver->init_termios.c_oflag = 0;
ptm_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
ptm_driver->init_termios.c_lflag = 0;
ptm_driver->init_termios.c_ispeed = 38400;
ptm_driver->init_termios.c_ospeed = 38400;
ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
ptm_driver->other = pts_driver;
tty_set_operations(ptm_driver, &ptm_unix98_ops);
pts_driver->owner = THIS_MODULE;
pts_driver->driver_name = "pty_slave";
pts_driver->name = "pts";
pts_driver->major = UNIX98_PTY_SLAVE_MAJOR;
pts_driver->minor_start = 0;
pts_driver->type = TTY_DRIVER_TYPE_PTY;
pts_driver->subtype = PTY_TYPE_SLAVE;
pts_driver->init_termios = tty_std_termios;
pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pts_driver->init_termios.c_ispeed = 38400;
pts_driver->init_termios.c_ospeed = 38400;
pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
pts_driver->other = ptm_driver;
tty_set_operations(pts_driver, &pty_unix98_ops);
if (tty_register_driver(ptm_driver))
panic("Couldn't register Unix98 ptm driver");
if (tty_register_driver(pts_driver))
panic("Couldn't register Unix98 pts driver");
register_sysctl_table(pty_root_table);
/* Now create the /dev/ptmx special device */
tty_default_fops(&ptmx_fops);
ptmx_fops.open = ptmx_open;
cdev_init(&ptmx_cdev, &ptmx_fops);
if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
panic("Couldn't register /dev/ptmx driver\n");
device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
}
#else
static inline void unix98_pty_init(void) { }
#endif
static int __init pty_init(void)
{
legacy_pty_init();
unix98_pty_init();
return 0;
}
module_init(pty_init);