linux/drivers/net/e1000e
Bruce Allan 818f33313c e1000e: do not initiate autonegotiation during OEM configuration
When configuring the OEM bits in the PHY on 82577/82578, do not restart
autonegotiation if the firmware is blocking it (e.g. when an IDE-R session
is active) because the link must not go down.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:32 -08:00
..
82571.c e1000e: swap max hw supported frame size between 82574 and 82583 2009-10-04 21:08:49 -07:00
defines.h e1000e: rework disable K1 at 1000Mbps for 82577/82578 2009-10-29 22:48:39 -07:00
e1000.h e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8 2009-11-20 13:53:20 -08:00
es2lan.c e1000e: add support for 82577/82578 GbE LOM parts 2009-06-03 02:46:34 -07:00
ethtool.c e1000e: set flow control thresholds properly after enabling/disabling pause 2009-11-20 13:53:24 -08:00
hw.h e1000e: rework disable K1 at 1000Mbps for 82577/82578 2009-10-29 22:48:39 -07:00
ich8lan.c e1000e: do not initiate autonegotiation during OEM configuration 2009-11-20 13:53:32 -08:00
lib.c e1000e: disable K1 at 1000Mbps for 82577/82578 2009-07-03 20:09:42 -07:00
Makefile e1000e: reformat comment blocks, cosmetic changes only 2008-03-28 22:14:56 -04:00
netdev.c e1000e: flow control thresholds not correct when changing mtu 2009-11-20 13:53:27 -08:00
param.c e1000e: enable CRC stripping by default 2009-06-03 02:46:31 -07:00
phy.c e1000e: remove unnecessary 82577 workaround causing link issues 2009-11-20 13:53:29 -08:00