6520fe5564
A new option is added to the relocs tool called '--realmode'. This option causes the generation of 16-bit segment relocations and 32-bit linear relocations for the real-mode code. When the real-mode code is moved to the low-memory during kernel initialization, these relocation entries can be used to relocate the code properly. In the assembly code 16-bit segment relocations must be relative to the 'real_mode_seg' absolute symbol. Linear relocations must be relative to a symbol prefixed with 'pa_'. 16-bit segment relocation is used to load cs:ip in 16-bit code. Linear relocations are used in the 32-bit code for relocatable data references. They are declared in the linker script of the real-mode code. The relocs tool is moved to arch/x86/tools/relocs.c, and added new target archscripts that can be used to build scripts needed building an architecture. be compiled before building the arch/x86 tree. [ hpa: accelerating this because it detects invalid absolute relocations, a serious bug in binutils 2.22.52.0.x which currently produces bad kernels. ] Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
223 lines
7.3 KiB
Makefile
223 lines
7.3 KiB
Makefile
# Unified Makefile for i386 and x86_64
|
|
|
|
# select defconfig based on actual architecture
|
|
ifeq ($(ARCH),x86)
|
|
KBUILD_DEFCONFIG := i386_defconfig
|
|
else
|
|
KBUILD_DEFCONFIG := $(ARCH)_defconfig
|
|
endif
|
|
|
|
# BITS is used as extension for files which are available in a 32 bit
|
|
# and a 64 bit version to simplify shared Makefiles.
|
|
# e.g.: obj-y += foo_$(BITS).o
|
|
export BITS
|
|
|
|
ifeq ($(CONFIG_X86_32),y)
|
|
BITS := 32
|
|
UTS_MACHINE := i386
|
|
CHECKFLAGS += -D__i386__
|
|
|
|
biarch := $(call cc-option,-m32)
|
|
KBUILD_AFLAGS += $(biarch)
|
|
KBUILD_CFLAGS += $(biarch)
|
|
|
|
ifdef CONFIG_RELOCATABLE
|
|
LDFLAGS_vmlinux := --emit-relocs
|
|
endif
|
|
|
|
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
|
|
|
|
# prevent gcc from keeping the stack 16 byte aligned
|
|
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
|
|
|
|
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
|
|
# a lot more stack due to the lack of sharing of stacklots:
|
|
KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0400, \
|
|
$(call cc-option,-fno-unit-at-a-time))
|
|
|
|
# CPU-specific tuning. Anything which can be shared with UML should go here.
|
|
include $(srctree)/arch/x86/Makefile_32.cpu
|
|
KBUILD_CFLAGS += $(cflags-y)
|
|
|
|
# temporary until string.h is fixed
|
|
KBUILD_CFLAGS += -ffreestanding
|
|
else
|
|
BITS := 64
|
|
UTS_MACHINE := x86_64
|
|
CHECKFLAGS += -D__x86_64__ -m64
|
|
|
|
KBUILD_AFLAGS += -m64
|
|
KBUILD_CFLAGS += -m64
|
|
|
|
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
|
|
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
|
|
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
|
|
|
|
cflags-$(CONFIG_MCORE2) += \
|
|
$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
|
|
cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \
|
|
$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
|
|
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
|
|
KBUILD_CFLAGS += $(cflags-y)
|
|
|
|
KBUILD_CFLAGS += -mno-red-zone
|
|
KBUILD_CFLAGS += -mcmodel=kernel
|
|
|
|
# -funit-at-a-time shrinks the kernel .text considerably
|
|
# unfortunately it makes reading oopses harder.
|
|
KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
|
|
|
|
# this works around some issues with generating unwind tables in older gccs
|
|
# newer gccs do it by default
|
|
KBUILD_CFLAGS += -maccumulate-outgoing-args
|
|
endif
|
|
|
|
ifdef CONFIG_CC_STACKPROTECTOR
|
|
cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
|
|
ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(KBUILD_CPPFLAGS) $(biarch)),y)
|
|
stackp-y := -fstack-protector
|
|
KBUILD_CFLAGS += $(stackp-y)
|
|
else
|
|
$(warning stack protector enabled but no compiler support)
|
|
endif
|
|
endif
|
|
|
|
ifdef CONFIG_X86_X32
|
|
x32_ld_ok := $(call try-run,\
|
|
/bin/echo -e '1: .quad 1b' | \
|
|
$(CC) $(KBUILD_AFLAGS) -c -xassembler -o "$$TMP" - && \
|
|
$(OBJCOPY) -O elf32-x86-64 "$$TMP" "$$TMPO" && \
|
|
$(LD) -m elf32_x86_64 "$$TMPO" -o "$$TMP",y,n)
|
|
ifeq ($(x32_ld_ok),y)
|
|
CONFIG_X86_X32_ABI := y
|
|
KBUILD_AFLAGS += -DCONFIG_X86_X32_ABI
|
|
KBUILD_CFLAGS += -DCONFIG_X86_X32_ABI
|
|
else
|
|
$(warning CONFIG_X86_X32 enabled but no binutils support)
|
|
endif
|
|
endif
|
|
export CONFIG_X86_X32_ABI
|
|
|
|
# Don't unroll struct assignments with kmemcheck enabled
|
|
ifeq ($(CONFIG_KMEMCHECK),y)
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy)
|
|
endif
|
|
|
|
# Stackpointer is addressed different for 32 bit and 64 bit x86
|
|
sp-$(CONFIG_X86_32) := esp
|
|
sp-$(CONFIG_X86_64) := rsp
|
|
|
|
# do binutils support CFI?
|
|
cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
|
|
# is .cfi_signal_frame supported too?
|
|
cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
|
|
cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
|
|
|
|
# does binutils support specific instructions?
|
|
asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
|
|
|
|
KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr)
|
|
KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr)
|
|
|
|
LDFLAGS := -m elf_$(UTS_MACHINE)
|
|
|
|
# Speed up the build
|
|
KBUILD_CFLAGS += -pipe
|
|
# Workaround for a gcc prelease that unfortunately was shipped in a suse release
|
|
KBUILD_CFLAGS += -Wno-sign-compare
|
|
#
|
|
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
|
|
# prevent gcc from generating any FP code by mistake
|
|
KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
|
|
KBUILD_CFLAGS += $(call cc-option,-mno-avx,)
|
|
|
|
KBUILD_CFLAGS += $(mflags-y)
|
|
KBUILD_AFLAGS += $(mflags-y)
|
|
|
|
archscripts:
|
|
$(Q)$(MAKE) $(build)=arch/x86/tools relocs
|
|
|
|
###
|
|
# Syscall table generation
|
|
|
|
archheaders:
|
|
$(Q)$(MAKE) $(build)=arch/x86/syscalls all
|
|
|
|
###
|
|
# Kernel objects
|
|
|
|
head-y := arch/x86/kernel/head_$(BITS).o
|
|
head-y += arch/x86/kernel/head$(BITS).o
|
|
head-y += arch/x86/kernel/head.o
|
|
head-y += arch/x86/kernel/init_task.o
|
|
|
|
libs-y += arch/x86/lib/
|
|
|
|
# See arch/x86/Kbuild for content of core part of the kernel
|
|
core-y += arch/x86/
|
|
|
|
# drivers-y are linked after core-y
|
|
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
|
|
drivers-$(CONFIG_PCI) += arch/x86/pci/
|
|
|
|
# must be linked after kernel/
|
|
drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
|
|
|
|
# suspend and hibernation support
|
|
drivers-$(CONFIG_PM) += arch/x86/power/
|
|
|
|
drivers-$(CONFIG_FB) += arch/x86/video/
|
|
|
|
####
|
|
# boot loader support. Several targets are kept for legacy purposes
|
|
|
|
boot := arch/x86/boot
|
|
|
|
BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
|
|
|
|
PHONY += bzImage $(BOOT_TARGETS)
|
|
|
|
# Default kernel to build
|
|
all: bzImage
|
|
|
|
# KBUILD_IMAGE specify target image being built
|
|
KBUILD_IMAGE := $(boot)/bzImage
|
|
|
|
bzImage: vmlinux
|
|
ifeq ($(CONFIG_X86_DECODER_SELFTEST),y)
|
|
$(Q)$(MAKE) $(build)=arch/x86/tools posttest
|
|
endif
|
|
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
|
|
$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
|
|
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
|
|
|
|
$(BOOT_TARGETS): vmlinux
|
|
$(Q)$(MAKE) $(build)=$(boot) $@
|
|
|
|
PHONY += install
|
|
install:
|
|
$(Q)$(MAKE) $(build)=$(boot) $@
|
|
|
|
PHONY += vdso_install
|
|
vdso_install:
|
|
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
|
|
|
|
archclean:
|
|
$(Q)rm -rf $(objtree)/arch/i386
|
|
$(Q)rm -rf $(objtree)/arch/x86_64
|
|
$(Q)$(MAKE) $(clean)=$(boot)
|
|
|
|
define archhelp
|
|
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
|
|
echo ' install - Install kernel using'
|
|
echo ' (your) ~/bin/$(INSTALLKERNEL) or'
|
|
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
|
|
echo ' install to $$(INSTALL_PATH) and run lilo'
|
|
echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
|
|
echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
|
|
echo ' fdimage288 - Create 2.8MB boot floppy image (arch/x86/boot/fdimage)'
|
|
echo ' isoimage - Create a boot CD-ROM image (arch/x86/boot/image.iso)'
|
|
echo ' bzdisk/fdimage*/isoimage also accept:'
|
|
echo ' FDARGS="..." arguments for the booted kernel'
|
|
echo ' FDINITRD=file initrd for the booted kernel'
|
|
endef
|