linux/drivers/watchdog/mpcore_wdt.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

453 lines
10 KiB
C

/*
* Watchdog driver for the mpcore watchdog timer
*
* (c) Copyright 2004 ARM Limited
*
* Based on the SoftDog driver:
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/fs.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
#include <asm/hardware/arm_twd.h>
struct mpcore_wdt {
unsigned long timer_alive;
struct device *dev;
void __iomem *base;
int irq;
unsigned int perturb;
char expect_close;
};
static struct platform_device *mpcore_wdt_dev;
extern unsigned int mpcore_timer_rate;
#define TIMER_MARGIN 60
static int mpcore_margin = TIMER_MARGIN;
module_param(mpcore_margin, int, 0);
MODULE_PARM_DESC(mpcore_margin,
"MPcore timer margin in seconds. (0 < mpcore_margin < 65536, default="
__MODULE_STRING(TIMER_MARGIN) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
#define ONLY_TESTING 0
static int mpcore_noboot = ONLY_TESTING;
module_param(mpcore_noboot, int, 0);
MODULE_PARM_DESC(mpcore_noboot, "MPcore watchdog action, "
"set to 1 to ignore reboots, 0 to reboot (default="
__MODULE_STRING(ONLY_TESTING) ")");
/*
* This is the interrupt handler. Note that we only use this
* in testing mode, so don't actually do a reboot here.
*/
static irqreturn_t mpcore_wdt_fire(int irq, void *arg)
{
struct mpcore_wdt *wdt = arg;
/* Check it really was our interrupt */
if (readl(wdt->base + TWD_WDOG_INTSTAT)) {
dev_printk(KERN_CRIT, wdt->dev,
"Triggered - Reboot ignored.\n");
/* Clear the interrupt on the watchdog */
writel(1, wdt->base + TWD_WDOG_INTSTAT);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
/*
* mpcore_wdt_keepalive - reload the timer
*
* Note that the spec says a DIFFERENT value must be written to the reload
* register each time. The "perturb" variable deals with this by adding 1
* to the count every other time the function is called.
*/
static void mpcore_wdt_keepalive(struct mpcore_wdt *wdt)
{
unsigned int count;
/* Assume prescale is set to 256 */
count = (mpcore_timer_rate / 256) * mpcore_margin;
/* Reload the counter */
spin_lock(&wdt_lock);
writel(count + wdt->perturb, wdt->base + TWD_WDOG_LOAD);
wdt->perturb = wdt->perturb ? 0 : 1;
spin_unlock(&wdt_lock);
}
static void mpcore_wdt_stop(struct mpcore_wdt *wdt)
{
spin_lock(&wdt_lock);
writel(0x12345678, wdt->base + TWD_WDOG_DISABLE);
writel(0x87654321, wdt->base + TWD_WDOG_DISABLE);
writel(0x0, wdt->base + TWD_WDOG_CONTROL);
spin_unlock(&wdt_lock);
}
static void mpcore_wdt_start(struct mpcore_wdt *wdt)
{
dev_printk(KERN_INFO, wdt->dev, "enabling watchdog.\n");
spin_lock(&wdt_lock);
/* This loads the count register but does NOT start the count yet */
mpcore_wdt_keepalive(wdt);
if (mpcore_noboot) {
/* Enable watchdog - prescale=256, watchdog mode=0, enable=1 */
writel(0x0000FF01, wdt->base + TWD_WDOG_CONTROL);
} else {
/* Enable watchdog - prescale=256, watchdog mode=1, enable=1 */
writel(0x0000FF09, wdt->base + TWD_WDOG_CONTROL);
}
spin_unlock(&wdt_lock);
}
static int mpcore_wdt_set_heartbeat(int t)
{
if (t < 0x0001 || t > 0xFFFF)
return -EINVAL;
mpcore_margin = t;
return 0;
}
/*
* /dev/watchdog handling
*/
static int mpcore_wdt_open(struct inode *inode, struct file *file)
{
struct mpcore_wdt *wdt = platform_get_drvdata(mpcore_wdt_dev);
if (test_and_set_bit(0, &wdt->timer_alive))
return -EBUSY;
if (nowayout)
__module_get(THIS_MODULE);
file->private_data = wdt;
/*
* Activate timer
*/
mpcore_wdt_start(wdt);
return nonseekable_open(inode, file);
}
static int mpcore_wdt_release(struct inode *inode, struct file *file)
{
struct mpcore_wdt *wdt = file->private_data;
/*
* Shut off the timer.
* Lock it in if it's a module and we set nowayout
*/
if (wdt->expect_close == 42)
mpcore_wdt_stop(wdt);
else {
dev_printk(KERN_CRIT, wdt->dev,
"unexpected close, not stopping watchdog!\n");
mpcore_wdt_keepalive(wdt);
}
clear_bit(0, &wdt->timer_alive);
wdt->expect_close = 0;
return 0;
}
static ssize_t mpcore_wdt_write(struct file *file, const char *data,
size_t len, loff_t *ppos)
{
struct mpcore_wdt *wdt = file->private_data;
/*
* Refresh the timer.
*/
if (len) {
if (!nowayout) {
size_t i;
/* In case it was set long ago */
wdt->expect_close = 0;
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
wdt->expect_close = 42;
}
}
mpcore_wdt_keepalive(wdt);
}
return len;
}
static const struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
.identity = "MPcore Watchdog",
};
static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
struct mpcore_wdt *wdt = file->private_data;
int ret;
union {
struct watchdog_info ident;
int i;
} uarg;
if (_IOC_DIR(cmd) && _IOC_SIZE(cmd) > sizeof(uarg))
return -ENOTTY;
if (_IOC_DIR(cmd) & _IOC_WRITE) {
ret = copy_from_user(&uarg, (void __user *)arg, _IOC_SIZE(cmd));
if (ret)
return -EFAULT;
}
switch (cmd) {
case WDIOC_GETSUPPORT:
uarg.ident = ident;
ret = 0;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
uarg.i = 0;
ret = 0;
break;
case WDIOC_SETOPTIONS:
ret = -EINVAL;
if (uarg.i & WDIOS_DISABLECARD) {
mpcore_wdt_stop(wdt);
ret = 0;
}
if (uarg.i & WDIOS_ENABLECARD) {
mpcore_wdt_start(wdt);
ret = 0;
}
break;
case WDIOC_KEEPALIVE:
mpcore_wdt_keepalive(wdt);
ret = 0;
break;
case WDIOC_SETTIMEOUT:
ret = mpcore_wdt_set_heartbeat(uarg.i);
if (ret)
break;
mpcore_wdt_keepalive(wdt);
/* Fall */
case WDIOC_GETTIMEOUT:
uarg.i = mpcore_margin;
ret = 0;
break;
default:
return -ENOTTY;
}
if (ret == 0 && _IOC_DIR(cmd) & _IOC_READ) {
ret = copy_to_user((void __user *)arg, &uarg, _IOC_SIZE(cmd));
if (ret)
ret = -EFAULT;
}
return ret;
}
/*
* System shutdown handler. Turn off the watchdog if we're
* restarting or halting the system.
*/
static void mpcore_wdt_shutdown(struct platform_device *dev)
{
struct mpcore_wdt *wdt = platform_get_drvdata(dev);
if (system_state == SYSTEM_RESTART || system_state == SYSTEM_HALT)
mpcore_wdt_stop(wdt);
}
/*
* Kernel Interfaces
*/
static const struct file_operations mpcore_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = mpcore_wdt_write,
.unlocked_ioctl = mpcore_wdt_ioctl,
.open = mpcore_wdt_open,
.release = mpcore_wdt_release,
};
static struct miscdevice mpcore_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &mpcore_wdt_fops,
};
static int __devinit mpcore_wdt_probe(struct platform_device *dev)
{
struct mpcore_wdt *wdt;
struct resource *res;
int ret;
/* We only accept one device, and it must have an id of -1 */
if (dev->id != -1)
return -ENODEV;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENODEV;
goto err_out;
}
wdt = kzalloc(sizeof(struct mpcore_wdt), GFP_KERNEL);
if (!wdt) {
ret = -ENOMEM;
goto err_out;
}
wdt->dev = &dev->dev;
wdt->irq = platform_get_irq(dev, 0);
if (wdt->irq < 0) {
ret = -ENXIO;
goto err_free;
}
wdt->base = ioremap(res->start, resource_size(res));
if (!wdt->base) {
ret = -ENOMEM;
goto err_free;
}
mpcore_wdt_miscdev.parent = &dev->dev;
ret = misc_register(&mpcore_wdt_miscdev);
if (ret) {
dev_printk(KERN_ERR, _dev,
"cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto err_misc;
}
ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED,
"mpcore_wdt", wdt);
if (ret) {
dev_printk(KERN_ERR, _dev,
"cannot register IRQ%d for watchdog\n", wdt->irq);
goto err_irq;
}
mpcore_wdt_stop(wdt);
platform_set_drvdata(&dev->dev, wdt);
mpcore_wdt_dev = dev;
return 0;
err_irq:
misc_deregister(&mpcore_wdt_miscdev);
err_misc:
iounmap(wdt->base);
err_free:
kfree(wdt);
err_out:
return ret;
}
static int __devexit mpcore_wdt_remove(struct platform_device *dev)
{
struct mpcore_wdt *wdt = platform_get_drvdata(dev);
platform_set_drvdata(dev, NULL);
misc_deregister(&mpcore_wdt_miscdev);
mpcore_wdt_dev = NULL;
free_irq(wdt->irq, wdt);
iounmap(wdt->base);
kfree(wdt);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:mpcore_wdt");
static struct platform_driver mpcore_wdt_driver = {
.probe = mpcore_wdt_probe,
.remove = __devexit_p(mpcore_wdt_remove),
.shutdown = mpcore_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
.name = "mpcore_wdt",
},
};
static char banner[] __initdata = KERN_INFO "MPcore Watchdog Timer: 0.1. "
"mpcore_noboot=%d mpcore_margin=%d sec (nowayout= %d)\n";
static int __init mpcore_wdt_init(void)
{
/*
* Check that the margin value is within it's range;
* if not reset to the default
*/
if (mpcore_wdt_set_heartbeat(mpcore_margin)) {
mpcore_wdt_set_heartbeat(TIMER_MARGIN);
printk(KERN_INFO "mpcore_margin value must be 0 < mpcore_margin < 65536, using %d\n",
TIMER_MARGIN);
}
printk(banner, mpcore_noboot, mpcore_margin, nowayout);
return platform_driver_register(&mpcore_wdt_driver);
}
static void __exit mpcore_wdt_exit(void)
{
platform_driver_unregister(&mpcore_wdt_driver);
}
module_init(mpcore_wdt_init);
module_exit(mpcore_wdt_exit);
MODULE_AUTHOR("ARM Limited");
MODULE_DESCRIPTION("MPcore Watchdog Device Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);