linux/arch/arm/mach-omap2/clock.c
Tony Lindgren 90afd5cb2a ARM: OMAP: Sync clocks with linux-omap tree
Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a
patch from Imre Deak to make McSPI clocks use id.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 13:27:20 +03:00

1184 lines
26 KiB
C

/*
* linux/arch/arm/mach-omap2/clock.c
*
* Copyright (C) 2005 Texas Instruments Inc.
* Richard Woodruff <r-woodruff2@ti.com>
* Created for OMAP2.
*
* Cleaned up and modified to use omap shared clock framework by
* Tony Lindgren <tony@atomide.com>
*
* Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include "prcm-regs.h"
#include "memory.h"
#include "clock.h"
#undef DEBUG
//#define DOWN_VARIABLE_DPLL 1 /* Experimental */
static struct prcm_config *curr_prcm_set;
static u32 curr_perf_level = PRCM_FULL_SPEED;
static struct clk *vclk;
static struct clk *sclk;
/*-------------------------------------------------------------------------
* Omap2 specific clock functions
*-------------------------------------------------------------------------*/
/* Recalculate SYST_CLK */
static void omap2_sys_clk_recalc(struct clk * clk)
{
u32 div = PRCM_CLKSRC_CTRL;
div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */
div >>= clk->rate_offset;
clk->rate = (clk->parent->rate / div);
propagate_rate(clk);
}
static u32 omap2_get_dpll_rate(struct clk * tclk)
{
long long dpll_clk;
int dpll_mult, dpll_div, amult;
dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */
dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */
dpll_clk = (long long)tclk->parent->rate * dpll_mult;
do_div(dpll_clk, dpll_div + 1);
amult = CM_CLKSEL2_PLL & 0x3;
dpll_clk *= amult;
return dpll_clk;
}
static void omap2_followparent_recalc(struct clk *clk)
{
followparent_recalc(clk);
}
static void omap2_propagate_rate(struct clk * clk)
{
if (!(clk->flags & RATE_FIXED))
clk->rate = clk->parent->rate;
propagate_rate(clk);
}
static void omap2_set_osc_ck(int enable)
{
if (enable)
PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
else
PRCM_CLKSRC_CTRL |= 0x3 << 3;
}
/* Enable an APLL if off */
static void omap2_clk_fixed_enable(struct clk *clk)
{
u32 cval, i=0;
if (clk->enable_bit == 0xff) /* Parent will do it */
return;
cval = CM_CLKEN_PLL;
if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
return;
cval &= ~(0x3 << clk->enable_bit);
cval |= (0x3 << clk->enable_bit);
CM_CLKEN_PLL = cval;
if (clk == &apll96_ck)
cval = (1 << 8);
else if (clk == &apll54_ck)
cval = (1 << 6);
while (!(CM_IDLEST_CKGEN & cval)) { /* Wait for lock */
++i;
udelay(1);
if (i == 100000) {
printk(KERN_ERR "Clock %s didn't lock\n", clk->name);
break;
}
}
}
static void omap2_clk_wait_ready(struct clk *clk)
{
unsigned long reg, other_reg, st_reg;
u32 bit;
int i;
reg = (unsigned long) clk->enable_reg;
if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
reg == (unsigned long) &CM_FCLKEN2_CORE)
other_reg = (reg & ~0xf0) | 0x10;
else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
reg == (unsigned long) &CM_ICLKEN2_CORE)
other_reg = (reg & ~0xf0) | 0x00;
else
return;
/* No check for DSS or cam clocks */
if ((reg & 0x0f) == 0) {
if (clk->enable_bit <= 1 || clk->enable_bit == 31)
return;
}
/* Check if both functional and interface clocks
* are running. */
bit = 1 << clk->enable_bit;
if (!(__raw_readl(other_reg) & bit))
return;
st_reg = (other_reg & ~0xf0) | 0x20;
i = 0;
while (!(__raw_readl(st_reg) & bit)) {
i++;
if (i == 100000) {
printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
break;
}
}
if (i)
pr_debug("Clock %s stable after %d loops\n", clk->name, i);
}
/* Enables clock without considering parent dependencies or use count
* REVISIT: Maybe change this to use clk->enable like on omap1?
*/
static int _omap2_clk_enable(struct clk * clk)
{
u32 regval32;
if (clk->flags & ALWAYS_ENABLED)
return 0;
if (unlikely(clk == &osc_ck)) {
omap2_set_osc_ck(1);
return 0;
}
if (unlikely(clk->enable_reg == 0)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
clk->name);
return 0;
}
if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
omap2_clk_fixed_enable(clk);
return 0;
}
regval32 = __raw_readl(clk->enable_reg);
regval32 |= (1 << clk->enable_bit);
__raw_writel(regval32, clk->enable_reg);
wmb();
omap2_clk_wait_ready(clk);
return 0;
}
/* Stop APLL */
static void omap2_clk_fixed_disable(struct clk *clk)
{
u32 cval;
if(clk->enable_bit == 0xff) /* let parent off do it */
return;
cval = CM_CLKEN_PLL;
cval &= ~(0x3 << clk->enable_bit);
CM_CLKEN_PLL = cval;
}
/* Disables clock without considering parent dependencies or use count */
static void _omap2_clk_disable(struct clk *clk)
{
u32 regval32;
if (unlikely(clk == &osc_ck)) {
omap2_set_osc_ck(0);
return;
}
if (clk->enable_reg == 0)
return;
if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
omap2_clk_fixed_disable(clk);
return;
}
regval32 = __raw_readl(clk->enable_reg);
regval32 &= ~(1 << clk->enable_bit);
__raw_writel(regval32, clk->enable_reg);
wmb();
}
static int omap2_clk_enable(struct clk *clk)
{
int ret = 0;
if (clk->usecount++ == 0) {
if (likely((u32)clk->parent))
ret = omap2_clk_enable(clk->parent);
if (unlikely(ret != 0)) {
clk->usecount--;
return ret;
}
ret = _omap2_clk_enable(clk);
if (unlikely(ret != 0) && clk->parent) {
omap2_clk_disable(clk->parent);
clk->usecount--;
}
}
return ret;
}
static void omap2_clk_disable(struct clk *clk)
{
if (clk->usecount > 0 && !(--clk->usecount)) {
_omap2_clk_disable(clk);
if (likely((u32)clk->parent))
omap2_clk_disable(clk->parent);
}
}
/*
* Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set.
*/
static u32 omap2_dpll_round_rate(unsigned long target_rate)
{
u32 high, low;
if ((CM_CLKSEL2_PLL & 0x3) == 1) { /* DPLL clockout */
high = curr_prcm_set->dpll_speed * 2;
low = curr_prcm_set->dpll_speed;
} else { /* DPLL clockout x 2 */
high = curr_prcm_set->dpll_speed;
low = curr_prcm_set->dpll_speed / 2;
}
#ifdef DOWN_VARIABLE_DPLL
if (target_rate > high)
return high;
else
return target_rate;
#else
if (target_rate > low)
return high;
else
return low;
#endif
}
/*
* Used for clocks that are part of CLKSEL_xyz governed clocks.
* REVISIT: Maybe change to use clk->enable() functions like on omap1?
*/
static void omap2_clksel_recalc(struct clk * clk)
{
u32 fixed = 0, div = 0;
if (clk == &dpll_ck) {
clk->rate = omap2_get_dpll_rate(clk);
fixed = 1;
div = 0;
}
if (clk == &iva1_mpu_int_ifck) {
div = 2;
fixed = 1;
}
if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
clk->rate = sys_ck.rate;
return;
}
if (!fixed) {
div = omap2_clksel_get_divisor(clk);
if (div == 0)
return;
}
if (div != 0) {
if (unlikely(clk->rate == clk->parent->rate / div))
return;
clk->rate = clk->parent->rate / div;
}
if (unlikely(clk->flags & RATE_PROPAGATES))
propagate_rate(clk);
}
/*
* Finds best divider value in an array based on the source and target
* rates. The divider array must be sorted with smallest divider first.
*/
static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
u32 src_rate, u32 tgt_rate)
{
int i, test_rate;
if (div_array == NULL)
return ~1;
for (i=0; i < size; i++) {
test_rate = src_rate / *div_array;
if (test_rate <= tgt_rate)
return *div_array;
++div_array;
}
return ~0; /* No acceptable divider */
}
/*
* Find divisor for the given clock and target rate.
*
* Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
* they are only settable as part of virtual_prcm set.
*/
static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
u32 *new_div)
{
u32 gfx_div[] = {2, 3, 4};
u32 sysclkout_div[] = {1, 2, 4, 8, 16};
u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
u32 best_div = ~0, asize = 0;
u32 *div_array = NULL;
switch (tclk->flags & SRC_RATE_SEL_MASK) {
case CM_GFX_SEL1:
asize = 3;
div_array = gfx_div;
break;
case CM_PLL_SEL1:
return omap2_dpll_round_rate(target_rate);
case CM_SYSCLKOUT_SEL1:
asize = 5;
div_array = sysclkout_div;
break;
case CM_CORE_SEL1:
if(tclk == &dss1_fck){
if(tclk->parent == &core_ck){
asize = 10;
div_array = dss1_div;
} else {
*new_div = 0; /* fixed clk */
return(tclk->parent->rate);
}
} else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
if(tclk->parent == &core_ck){
asize = 10;
div_array = vylnq_div;
} else {
*new_div = 0; /* fixed clk */
return(tclk->parent->rate);
}
}
break;
}
best_div = omap2_divider_from_table(asize, div_array,
tclk->parent->rate, target_rate);
if (best_div == ~0){
*new_div = 1;
return best_div; /* signal error */
}
*new_div = best_div;
return (tclk->parent->rate / best_div);
}
/* Given a clock and a rate apply a clock specific rounding function */
static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
{
u32 new_div = 0;
int valid_rate;
if (clk->flags & RATE_FIXED)
return clk->rate;
if (clk->flags & RATE_CKCTL) {
valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
return valid_rate;
}
if (clk->round_rate != 0)
return clk->round_rate(clk, rate);
return clk->rate;
}
/*
* Check the DLL lock state, and return tue if running in unlock mode.
* This is needed to compenste for the shifted DLL value in unlock mode.
*/
static u32 omap2_dll_force_needed(void)
{
u32 dll_state = SDRC_DLLA_CTRL; /* dlla and dllb are a set */
if ((dll_state & (1 << 2)) == (1 << 2))
return 1;
else
return 0;
}
static u32 omap2_reprogram_sdrc(u32 level, u32 force)
{
u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
u32 prev = curr_perf_level, flags;
if ((curr_perf_level == level) && !force)
return prev;
m_type = omap2_memory_get_type();
slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
if (level == PRCM_HALF_SPEED) {
local_irq_save(flags);
PRCM_VOLTSETUP = 0xffff;
omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
slow_dll_ctrl, m_type);
curr_perf_level = PRCM_HALF_SPEED;
local_irq_restore(flags);
}
if (level == PRCM_FULL_SPEED) {
local_irq_save(flags);
PRCM_VOLTSETUP = 0xffff;
omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
fast_dll_ctrl, m_type);
curr_perf_level = PRCM_FULL_SPEED;
local_irq_restore(flags);
}
return prev;
}
static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
{
u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
u32 bypass = 0;
struct prcm_config tmpset;
int ret = -EINVAL;
local_irq_save(flags);
cur_rate = omap2_get_dpll_rate(&dpll_ck);
mult = CM_CLKSEL2_PLL & 0x3;
if ((rate == (cur_rate / 2)) && (mult == 2)) {
omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
} else if (rate != cur_rate) {
valid_rate = omap2_dpll_round_rate(rate);
if (valid_rate != rate)
goto dpll_exit;
if ((CM_CLKSEL2_PLL & 0x3) == 1)
low = curr_prcm_set->dpll_speed;
else
low = curr_prcm_set->dpll_speed / 2;
tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
tmpset.cm_clksel2_pll &= ~0x3;
if (rate > low) {
tmpset.cm_clksel2_pll |= 0x2;
mult = ((rate / 2) / 1000000);
done_rate = PRCM_FULL_SPEED;
} else {
tmpset.cm_clksel2_pll |= 0x1;
mult = (rate / 1000000);
done_rate = PRCM_HALF_SPEED;
}
tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
/* Worst case */
tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
bypass = 1;
omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
/* Force dll lock mode */
omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
bypass);
/* Errata: ret dll entry state */
omap2_init_memory_params(omap2_dll_force_needed());
omap2_reprogram_sdrc(done_rate, 0);
}
omap2_clksel_recalc(&dpll_ck);
ret = 0;
dpll_exit:
local_irq_restore(flags);
return(ret);
}
/* Just return the MPU speed */
static void omap2_mpu_recalc(struct clk * clk)
{
clk->rate = curr_prcm_set->mpu_speed;
}
/*
* Look for a rate equal or less than the target rate given a configuration set.
*
* What's not entirely clear is "which" field represents the key field.
* Some might argue L3-DDR, others ARM, others IVA. This code is simple and
* just uses the ARM rates.
*/
static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
{
struct prcm_config * ptr;
long highest_rate;
if (clk != &virt_prcm_set)
return -EINVAL;
highest_rate = -EINVAL;
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (ptr->xtal_speed != sys_ck.rate)
continue;
highest_rate = ptr->mpu_speed;
/* Can check only after xtal frequency check */
if (ptr->mpu_speed <= rate)
break;
}
return highest_rate;
}
/*
* omap2_convert_field_to_div() - turn field value into integer divider
*/
static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
{
u32 i;
u32 clkout_array[] = {1, 2, 4, 8, 16};
if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
for (i = 0; i < 5; i++) {
if (field_val == i)
return clkout_array[i];
}
return ~0;
} else
return field_val;
}
/*
* Returns the CLKSEL divider register value
* REVISIT: This should be cleaned up to work nicely with void __iomem *
*/
static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
struct clk *clk)
{
int ret = ~0;
u32 reg_val, div_off;
u32 div_addr = 0;
u32 mask = ~0;
div_off = clk->rate_offset;
switch ((*div_sel & SRC_RATE_SEL_MASK)) {
case CM_MPU_SEL1:
div_addr = (u32)&CM_CLKSEL_MPU;
mask = 0x1f;
break;
case CM_DSP_SEL1:
div_addr = (u32)&CM_CLKSEL_DSP;
if (cpu_is_omap2420()) {
if ((div_off == 0) || (div_off == 8))
mask = 0x1f;
else if (div_off == 5)
mask = 0x3;
} else if (cpu_is_omap2430()) {
if (div_off == 0)
mask = 0x1f;
else if (div_off == 5)
mask = 0x3;
}
break;
case CM_GFX_SEL1:
div_addr = (u32)&CM_CLKSEL_GFX;
if (div_off == 0)
mask = 0x7;
break;
case CM_MODEM_SEL1:
div_addr = (u32)&CM_CLKSEL_MDM;
if (div_off == 0)
mask = 0xf;
break;
case CM_SYSCLKOUT_SEL1:
div_addr = (u32)&PRCM_CLKOUT_CTRL;
if ((div_off == 3) || (div_off = 11))
mask= 0x3;
break;
case CM_CORE_SEL1:
div_addr = (u32)&CM_CLKSEL1_CORE;
switch (div_off) {
case 0: /* l3 */
case 8: /* dss1 */
case 15: /* vylnc-2420 */
case 20: /* ssi */
mask = 0x1f; break;
case 5: /* l4 */
mask = 0x3; break;
case 13: /* dss2 */
mask = 0x1; break;
case 25: /* usb */
mask = 0x7; break;
}
}
*field_mask = mask;
if (unlikely(mask == ~0))
div_addr = 0;
*div_sel = div_addr;
if (unlikely(div_addr == 0))
return ret;
/* Isolate field */
reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
/* Normalize back to divider value */
reg_val >>= div_off;
return reg_val;
}
/*
* Return divider to be applied to parent clock.
* Return 0 on error.
*/
static u32 omap2_clksel_get_divisor(struct clk *clk)
{
int ret = 0;
u32 div, div_sel, div_off, field_mask, field_val;
/* isolate control register */
div_sel = (SRC_RATE_SEL_MASK & clk->flags);
div_off = clk->rate_offset;
field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
if (div_sel == 0)
return ret;
div_sel = (SRC_RATE_SEL_MASK & clk->flags);
div = omap2_clksel_to_divisor(div_sel, field_val);
return div;
}
/* Set the clock rate for a clock source */
static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret = -EINVAL;
void __iomem * reg;
u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
u32 new_div = 0;
if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
if (clk == &dpll_ck)
return omap2_reprogram_dpll(clk, rate);
/* Isolate control register */
div_sel = (SRC_RATE_SEL_MASK & clk->flags);
div_off = clk->rate_offset;
validrate = omap2_clksel_round_rate(clk, rate, &new_div);
if (validrate != rate)
return(ret);
field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
if (div_sel == 0)
return ret;
if (clk->flags & CM_SYSCLKOUT_SEL1) {
switch (new_div) {
case 16:
field_val = 4;
break;
case 8:
field_val = 3;
break;
case 4:
field_val = 2;
break;
case 2:
field_val = 1;
break;
case 1:
field_val = 0;
break;
}
} else
field_val = new_div;
reg = (void __iomem *)div_sel;
reg_val = __raw_readl(reg);
reg_val &= ~(field_mask << div_off);
reg_val |= (field_val << div_off);
__raw_writel(reg_val, reg);
wmb();
clk->rate = clk->parent->rate / field_val;
if (clk->flags & DELAYED_APP) {
__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
wmb();
}
ret = 0;
} else if (clk->set_rate != 0)
ret = clk->set_rate(clk, rate);
if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
propagate_rate(clk);
return ret;
}
/* Converts encoded control register address into a full address */
static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
struct clk *src_clk, u32 *field_mask)
{
u32 val = ~0, src_reg_addr = 0, mask = 0;
/* Find target control register.*/
switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
case CM_CORE_SEL1:
src_reg_addr = (u32)&CM_CLKSEL1_CORE;
if (reg_offset == 13) { /* DSS2_fclk */
mask = 0x1;
if (src_clk == &sys_ck)
val = 0;
if (src_clk == &func_48m_ck)
val = 1;
} else if (reg_offset == 8) { /* DSS1_fclk */
mask = 0x1f;
if (src_clk == &sys_ck)
val = 0;
else if (src_clk == &core_ck) /* divided clock */
val = 0x10; /* rate needs fixing */
} else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
mask = 0x1F;
if(src_clk == &func_96m_ck)
val = 0;
else if (src_clk == &core_ck)
val = 0x10;
}
break;
case CM_CORE_SEL2:
src_reg_addr = (u32)&CM_CLKSEL2_CORE;
mask = 0x3;
if (src_clk == &func_32k_ck)
val = 0x0;
if (src_clk == &sys_ck)
val = 0x1;
if (src_clk == &alt_ck)
val = 0x2;
break;
case CM_WKUP_SEL1:
src_reg_addr = (u32)&CM_CLKSEL_WKUP;
mask = 0x3;
if (src_clk == &func_32k_ck)
val = 0x0;
if (src_clk == &sys_ck)
val = 0x1;
if (src_clk == &alt_ck)
val = 0x2;
break;
case CM_PLL_SEL1:
src_reg_addr = (u32)&CM_CLKSEL1_PLL;
mask = 0x1;
if (reg_offset == 0x3) {
if (src_clk == &apll96_ck)
val = 0;
if (src_clk == &alt_ck)
val = 1;
}
else if (reg_offset == 0x5) {
if (src_clk == &apll54_ck)
val = 0;
if (src_clk == &alt_ck)
val = 1;
}
break;
case CM_PLL_SEL2:
src_reg_addr = (u32)&CM_CLKSEL2_PLL;
mask = 0x3;
if (src_clk == &func_32k_ck)
val = 0x0;
if (src_clk == &dpll_ck)
val = 0x2;
break;
case CM_SYSCLKOUT_SEL1:
src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
mask = 0x3;
if (src_clk == &dpll_ck)
val = 0;
if (src_clk == &sys_ck)
val = 1;
if (src_clk == &func_96m_ck)
val = 2;
if (src_clk == &func_54m_ck)
val = 3;
break;
}
if (val == ~0) /* Catch errors in offset */
*type_to_addr = 0;
else
*type_to_addr = src_reg_addr;
*field_mask = mask;
return val;
}
static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
{
void __iomem * reg;
u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
int ret = -EINVAL;
if (unlikely(clk->flags & CONFIG_PARTICIPANT))
return ret;
if (clk->flags & SRC_SEL_MASK) { /* On-chip SEL collection */
src_sel = (SRC_RATE_SEL_MASK & clk->flags);
src_off = clk->src_offset;
if (src_sel == 0)
goto set_parent_error;
field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
&field_mask);
reg = (void __iomem *)src_sel;
if (clk->usecount > 0)
_omap2_clk_disable(clk);
/* Set new source value (previous dividers if any in effect) */
reg_val = __raw_readl(reg) & ~(field_mask << src_off);
reg_val |= (field_val << src_off);
__raw_writel(reg_val, reg);
wmb();
if (clk->flags & DELAYED_APP) {
__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
wmb();
}
if (clk->usecount > 0)
_omap2_clk_enable(clk);
clk->parent = new_parent;
/* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
if ((new_parent == &core_ck) && (clk == &dss1_fck))
clk->rate = new_parent->rate / 0x10;
else
clk->rate = new_parent->rate;
if (unlikely(clk->flags & RATE_PROPAGATES))
propagate_rate(clk);
return 0;
} else {
clk->parent = new_parent;
rate = new_parent->rate;
omap2_clk_set_rate(clk, rate);
ret = 0;
}
set_parent_error:
return ret;
}
/* Sets basic clocks based on the specified rate */
static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
{
u32 flags, cur_rate, done_rate, bypass = 0;
u8 cpu_mask = 0;
struct prcm_config *prcm;
unsigned long found_speed = 0;
if (clk != &virt_prcm_set)
return -EINVAL;
/* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
if (cpu_is_omap2420())
cpu_mask = RATE_IN_242X;
else if (cpu_is_omap2430())
cpu_mask = RATE_IN_243X;
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sys_ck.rate)
continue;
if (prcm->mpu_speed <= rate) {
found_speed = prcm->mpu_speed;
break;
}
}
if (!found_speed) {
printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
rate / 1000000);
return -EINVAL;
}
curr_prcm_set = prcm;
cur_rate = omap2_get_dpll_rate(&dpll_ck);
if (prcm->dpll_speed == cur_rate / 2) {
omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
} else if (prcm->dpll_speed == cur_rate * 2) {
omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
} else if (prcm->dpll_speed != cur_rate) {
local_irq_save(flags);
if (prcm->dpll_speed == prcm->xtal_speed)
bypass = 1;
if ((prcm->cm_clksel2_pll & 0x3) == 2)
done_rate = PRCM_FULL_SPEED;
else
done_rate = PRCM_HALF_SPEED;
/* MPU divider */
CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
/* dsp + iva1 div(2420), iva2.1(2430) */
CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
/* Major subsystem dividers */
CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
if (cpu_is_omap2430())
CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
/* x2 to enter init_mem */
omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
bypass);
omap2_init_memory_params(omap2_dll_force_needed());
omap2_reprogram_sdrc(done_rate, 0);
local_irq_restore(flags);
}
omap2_clksel_recalc(&dpll_ck);
return 0;
}
/*-------------------------------------------------------------------------
* Omap2 clock reset and init functions
*-------------------------------------------------------------------------*/
#ifdef CONFIG_OMAP_RESET_CLOCKS
static void __init omap2_clk_disable_unused(struct clk *clk)
{
u32 regval32;
regval32 = __raw_readl(clk->enable_reg);
if ((regval32 & (1 << clk->enable_bit)) == 0)
return;
printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
_omap2_clk_disable(clk);
}
#else
#define omap2_clk_disable_unused NULL
#endif
static struct clk_functions omap2_clk_functions = {
.clk_enable = omap2_clk_enable,
.clk_disable = omap2_clk_disable,
.clk_round_rate = omap2_clk_round_rate,
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
};
static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
{
u32 div, aplls, sclk = 13000000;
aplls = CM_CLKSEL1_PLL;
aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
aplls >>= 23; /* Isolate field, 0,2,3 */
if (aplls == 0)
sclk = 19200000;
else if (aplls == 2)
sclk = 13000000;
else if (aplls == 3)
sclk = 12000000;
div = PRCM_CLKSRC_CTRL;
div &= ((1 << 7) | (1 << 6));
div >>= sys->rate_offset;
osc->rate = sclk * div;
sys->rate = sclk;
}
/*
* Set clocks for bypass mode for reboot to work.
*/
void omap2_clk_prepare_for_reboot(void)
{
u32 rate;
if (vclk == NULL || sclk == NULL)
return;
rate = clk_get_rate(sclk);
clk_set_rate(vclk, rate);
}
/*
* Switch the MPU rate if specified on cmdline.
* We cannot do this early until cmdline is parsed.
*/
static int __init omap2_clk_arch_init(void)
{
if (!mpurate)
return -EINVAL;
if (omap2_select_table_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
propagate_rate(&osc_ck); /* update main root fast */
propagate_rate(&func_32k_ck); /* update main root slow */
printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
return 0;
}
arch_initcall(omap2_clk_arch_init);
int __init omap2_clk_init(void)
{
struct prcm_config *prcm;
struct clk ** clkp;
u32 clkrate;
clk_init(&omap2_clk_functions);
omap2_get_crystal_rate(&osc_ck, &sys_ck);
for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
clkp++) {
if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
clk_register(*clkp);
continue;
}
if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
clk_register(*clkp);
continue;
}
}
/* Check the MPU rate set by bootloader */
clkrate = omap2_get_dpll_rate(&dpll_ck);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (prcm->xtal_speed != sys_ck.rate)
continue;
if (prcm->dpll_speed <= clkrate)
break;
}
curr_prcm_set = prcm;
propagate_rate(&osc_ck); /* update main root fast */
propagate_rate(&func_32k_ck); /* update main root slow */
printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
/*
* Only enable those clocks we will need, let the drivers
* enable other clocks as necessary
*/
clk_enable(&sync_32k_ick);
clk_enable(&omapctrl_ick);
/* Force the APLLs active during bootup to avoid disabling and
* enabling them unnecessarily. */
clk_enable(&apll96_ck);
clk_enable(&apll54_ck);
if (cpu_is_omap2430())
clk_enable(&sdrc_ick);
/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
vclk = clk_get(NULL, "virt_prcm_set");
sclk = clk_get(NULL, "sys_ck");
return 0;
}
static int __init omap2_disable_aplls(void)
{
clk_disable(&apll96_ck);
clk_disable(&apll54_ck);
return 0;
}
late_initcall(omap2_disable_aplls);