linux/drivers/pcmcia/xxs1500_ss.c

340 lines
8.1 KiB
C

/*
* PCMCIA socket code for the MyCable XXS1500 system.
*
* Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
*
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/resource.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
#define MEM_MAP_SIZE 0x400000
#define IO_MAP_SIZE 0x1000
/*
* 3.3V cards only; all interfacing is done via gpios:
*
* 0/1: carddetect (00 = card present, xx = huh)
* 4: card irq
* 204: reset (high-act)
* 205: buffer enable (low-act)
* 208/209: card voltage key (00,01,10,11)
* 210: battwarn
* 211: batdead
* 214: power (low-act)
*/
#define GPIO_CDA 0
#define GPIO_CDB 1
#define GPIO_CARDIRQ 4
#define GPIO_RESET 204
#define GPIO_OUTEN 205
#define GPIO_VSL 208
#define GPIO_VSH 209
#define GPIO_BATTDEAD 210
#define GPIO_BATTWARN 211
#define GPIO_POWER 214
struct xxs1500_pcmcia_sock {
struct pcmcia_socket socket;
void *virt_io;
phys_addr_t phys_io;
phys_addr_t phys_attr;
phys_addr_t phys_mem;
/* previous flags for set_socket() */
unsigned int old_flags;
};
#define to_xxs_socket(x) container_of(x, struct xxs1500_pcmcia_sock, socket)
static irqreturn_t cdirq(int irq, void *data)
{
struct xxs1500_pcmcia_sock *sock = data;
pcmcia_parse_events(&sock->socket, SS_DETECT);
return IRQ_HANDLED;
}
static int xxs1500_pcmcia_configure(struct pcmcia_socket *skt,
struct socket_state_t *state)
{
struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
unsigned int changed;
/* power control */
switch (state->Vcc) {
case 0:
gpio_set_value(GPIO_POWER, 1); /* power off */
break;
case 33:
gpio_set_value(GPIO_POWER, 0); /* power on */
break;
case 50:
default:
return -EINVAL;
}
changed = state->flags ^ sock->old_flags;
if (changed & SS_RESET) {
if (state->flags & SS_RESET) {
gpio_set_value(GPIO_RESET, 1); /* assert reset */
gpio_set_value(GPIO_OUTEN, 1); /* buffers off */
} else {
gpio_set_value(GPIO_RESET, 0); /* deassert reset */
gpio_set_value(GPIO_OUTEN, 0); /* buffers on */
msleep(500);
}
}
sock->old_flags = state->flags;
return 0;
}
static int xxs1500_pcmcia_get_status(struct pcmcia_socket *skt,
unsigned int *value)
{
unsigned int status;
int i;
status = 0;
/* check carddetects: GPIO[0:1] must both be low */
if (!gpio_get_value(GPIO_CDA) && !gpio_get_value(GPIO_CDB))
status |= SS_DETECT;
/* determine card voltage: GPIO[208:209] binary value */
i = (!!gpio_get_value(GPIO_VSL)) | ((!!gpio_get_value(GPIO_VSH)) << 1);
switch (i) {
case 0:
case 1:
case 2:
status |= SS_3VCARD; /* 3V card */
break;
case 3: /* 5V card, unsupported */
default:
status |= SS_XVCARD; /* treated as unsupported in core */
}
/* GPIO214: low active power switch */
status |= gpio_get_value(GPIO_POWER) ? 0 : SS_POWERON;
/* GPIO204: high-active reset line */
status |= gpio_get_value(GPIO_RESET) ? SS_RESET : SS_READY;
/* other stuff */
status |= gpio_get_value(GPIO_BATTDEAD) ? 0 : SS_BATDEAD;
status |= gpio_get_value(GPIO_BATTWARN) ? 0 : SS_BATWARN;
*value = status;
return 0;
}
static int xxs1500_pcmcia_sock_init(struct pcmcia_socket *skt)
{
gpio_direction_input(GPIO_CDA);
gpio_direction_input(GPIO_CDB);
gpio_direction_input(GPIO_VSL);
gpio_direction_input(GPIO_VSH);
gpio_direction_input(GPIO_BATTDEAD);
gpio_direction_input(GPIO_BATTWARN);
gpio_direction_output(GPIO_RESET, 1); /* assert reset */
gpio_direction_output(GPIO_OUTEN, 1); /* disable buffers */
gpio_direction_output(GPIO_POWER, 1); /* power off */
return 0;
}
static int xxs1500_pcmcia_sock_suspend(struct pcmcia_socket *skt)
{
return 0;
}
static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
struct pccard_io_map *map)
{
struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
map->start = (u32)sock->virt_io;
map->stop = map->start + IO_MAP_SIZE;
return 0;
}
static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
struct pccard_mem_map *map)
{
struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
if (map->flags & MAP_ATTRIB)
map->static_start = sock->phys_attr + map->card_start;
else
map->static_start = sock->phys_mem + map->card_start;
return 0;
}
static struct pccard_operations xxs1500_pcmcia_operations = {
.init = xxs1500_pcmcia_sock_init,
.suspend = xxs1500_pcmcia_sock_suspend,
.get_status = xxs1500_pcmcia_get_status,
.set_socket = xxs1500_pcmcia_configure,
.set_io_map = au1x00_pcmcia_set_io_map,
.set_mem_map = au1x00_pcmcia_set_mem_map,
};
static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
{
struct xxs1500_pcmcia_sock *sock;
struct resource *r;
int ret, irq;
sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL);
if (!sock)
return -ENOMEM;
ret = -ENODEV;
/* 36bit PCMCIA Attribute area address */
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
if (!r) {
dev_err(&pdev->dev, "missing 'pcmcia-attr' resource!\n");
goto out0;
}
sock->phys_attr = r->start;
/* 36bit PCMCIA Memory area address */
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
if (!r) {
dev_err(&pdev->dev, "missing 'pcmcia-mem' resource!\n");
goto out0;
}
sock->phys_mem = r->start;
/* 36bit PCMCIA IO area address */
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
if (!r) {
dev_err(&pdev->dev, "missing 'pcmcia-io' resource!\n");
goto out0;
}
sock->phys_io = r->start;
/*
* PCMCIA client drivers use the inb/outb macros to access
* the IO registers. Since mips_io_port_base is added
* to the access address of the mips implementation of
* inb/outb, we need to subtract it here because we want
* to access the I/O or MEM address directly, without
* going through this "mips_io_port_base" mechanism.
*/
sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
mips_io_port_base);
if (!sock->virt_io) {
dev_err(&pdev->dev, "cannot remap IO area\n");
ret = -ENOMEM;
goto out0;
}
sock->socket.ops = &xxs1500_pcmcia_operations;
sock->socket.owner = THIS_MODULE;
sock->socket.pci_irq = gpio_to_irq(GPIO_CARDIRQ);
sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
sock->socket.map_size = MEM_MAP_SIZE;
sock->socket.io_offset = (unsigned long)sock->virt_io;
sock->socket.dev.parent = &pdev->dev;
sock->socket.resource_ops = &pccard_static_ops;
platform_set_drvdata(pdev, sock);
/* setup carddetect irq: use one of the 2 GPIOs as an
* edge detector.
*/
irq = gpio_to_irq(GPIO_CDA);
set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
ret = request_irq(irq, cdirq, 0, "pcmcia_carddetect", sock);
if (ret) {
dev_err(&pdev->dev, "cannot setup cd irq\n");
goto out1;
}
ret = pcmcia_register_socket(&sock->socket);
if (ret) {
dev_err(&pdev->dev, "failed to register\n");
goto out2;
}
printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n");
return 0;
out2:
free_irq(gpio_to_irq(GPIO_CDA), sock);
out1:
iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
out0:
kfree(sock);
return ret;
}
static int __devexit xxs1500_pcmcia_remove(struct platform_device *pdev)
{
struct xxs1500_pcmcia_sock *sock = platform_get_drvdata(pdev);
pcmcia_unregister_socket(&sock->socket);
free_irq(gpio_to_irq(GPIO_CDA), sock);
iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
kfree(sock);
return 0;
}
static struct platform_driver xxs1500_pcmcia_socket_driver = {
.driver = {
.name = "xxs1500_pcmcia",
.owner = THIS_MODULE,
},
.probe = xxs1500_pcmcia_probe,
.remove = __devexit_p(xxs1500_pcmcia_remove),
};
int __init xxs1500_pcmcia_socket_load(void)
{
return platform_driver_register(&xxs1500_pcmcia_socket_driver);
}
void __exit xxs1500_pcmcia_socket_unload(void)
{
platform_driver_unregister(&xxs1500_pcmcia_socket_driver);
}
module_init(xxs1500_pcmcia_socket_load);
module_exit(xxs1500_pcmcia_socket_unload);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems");
MODULE_AUTHOR("Manuel Lauss");