970e248649
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
516 lines
22 KiB
Text
516 lines
22 KiB
Text
Power Management for USB
|
|
|
|
Alan Stern <stern@rowland.harvard.edu>
|
|
|
|
October 28, 2010
|
|
|
|
|
|
|
|
What is Power Management?
|
|
-------------------------
|
|
|
|
Power Management (PM) is the practice of saving energy by suspending
|
|
parts of a computer system when they aren't being used. While a
|
|
component is "suspended" it is in a nonfunctional low-power state; it
|
|
might even be turned off completely. A suspended component can be
|
|
"resumed" (returned to a functional full-power state) when the kernel
|
|
needs to use it. (There also are forms of PM in which components are
|
|
placed in a less functional but still usable state instead of being
|
|
suspended; an example would be reducing the CPU's clock rate. This
|
|
document will not discuss those other forms.)
|
|
|
|
When the parts being suspended include the CPU and most of the rest of
|
|
the system, we speak of it as a "system suspend". When a particular
|
|
device is turned off while the system as a whole remains running, we
|
|
call it a "dynamic suspend" (also known as a "runtime suspend" or
|
|
"selective suspend"). This document concentrates mostly on how
|
|
dynamic PM is implemented in the USB subsystem, although system PM is
|
|
covered to some extent (see Documentation/power/*.txt for more
|
|
information about system PM).
|
|
|
|
Note: Dynamic PM support for USB is present only if the kernel was
|
|
built with CONFIG_USB_SUSPEND enabled (which depends on
|
|
CONFIG_PM_RUNTIME). System PM support is present only if the kernel
|
|
was built with CONFIG_SUSPEND or CONFIG_HIBERNATION enabled.
|
|
|
|
|
|
What is Remote Wakeup?
|
|
----------------------
|
|
|
|
When a device has been suspended, it generally doesn't resume until
|
|
the computer tells it to. Likewise, if the entire computer has been
|
|
suspended, it generally doesn't resume until the user tells it to, say
|
|
by pressing a power button or opening the cover.
|
|
|
|
However some devices have the capability of resuming by themselves, or
|
|
asking the kernel to resume them, or even telling the entire computer
|
|
to resume. This capability goes by several names such as "Wake On
|
|
LAN"; we will refer to it generically as "remote wakeup". When a
|
|
device is enabled for remote wakeup and it is suspended, it may resume
|
|
itself (or send a request to be resumed) in response to some external
|
|
event. Examples include a suspended keyboard resuming when a key is
|
|
pressed, or a suspended USB hub resuming when a device is plugged in.
|
|
|
|
|
|
When is a USB device idle?
|
|
--------------------------
|
|
|
|
A device is idle whenever the kernel thinks it's not busy doing
|
|
anything important and thus is a candidate for being suspended. The
|
|
exact definition depends on the device's driver; drivers are allowed
|
|
to declare that a device isn't idle even when there's no actual
|
|
communication taking place. (For example, a hub isn't considered idle
|
|
unless all the devices plugged into that hub are already suspended.)
|
|
In addition, a device isn't considered idle so long as a program keeps
|
|
its usbfs file open, whether or not any I/O is going on.
|
|
|
|
If a USB device has no driver, its usbfs file isn't open, and it isn't
|
|
being accessed through sysfs, then it definitely is idle.
|
|
|
|
|
|
Forms of dynamic PM
|
|
-------------------
|
|
|
|
Dynamic suspends occur when the kernel decides to suspend an idle
|
|
device. This is called "autosuspend" for short. In general, a device
|
|
won't be autosuspended unless it has been idle for some minimum period
|
|
of time, the so-called idle-delay time.
|
|
|
|
Of course, nothing the kernel does on its own initiative should
|
|
prevent the computer or its devices from working properly. If a
|
|
device has been autosuspended and a program tries to use it, the
|
|
kernel will automatically resume the device (autoresume). For the
|
|
same reason, an autosuspended device will usually have remote wakeup
|
|
enabled, if the device supports remote wakeup.
|
|
|
|
It is worth mentioning that many USB drivers don't support
|
|
autosuspend. In fact, at the time of this writing (Linux 2.6.23) the
|
|
only drivers which do support it are the hub driver, kaweth, asix,
|
|
usblp, usblcd, and usb-skeleton (which doesn't count). If a
|
|
non-supporting driver is bound to a device, the device won't be
|
|
autosuspended. In effect, the kernel pretends the device is never
|
|
idle.
|
|
|
|
We can categorize power management events in two broad classes:
|
|
external and internal. External events are those triggered by some
|
|
agent outside the USB stack: system suspend/resume (triggered by
|
|
userspace), manual dynamic resume (also triggered by userspace), and
|
|
remote wakeup (triggered by the device). Internal events are those
|
|
triggered within the USB stack: autosuspend and autoresume. Note that
|
|
all dynamic suspend events are internal; external agents are not
|
|
allowed to issue dynamic suspends.
|
|
|
|
|
|
The user interface for dynamic PM
|
|
---------------------------------
|
|
|
|
The user interface for controlling dynamic PM is located in the power/
|
|
subdirectory of each USB device's sysfs directory, that is, in
|
|
/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The
|
|
relevant attribute files are: wakeup, control, and
|
|
autosuspend_delay_ms. (There may also be a file named "level"; this
|
|
file was deprecated as of the 2.6.35 kernel and replaced by the
|
|
"control" file. In 2.6.38 the "autosuspend" file will be deprecated
|
|
and replaced by the "autosuspend_delay_ms" file. The only difference
|
|
is that the newer file expresses the delay in milliseconds whereas the
|
|
older file uses seconds. Confusingly, both files are present in 2.6.37
|
|
but only "autosuspend" works.)
|
|
|
|
power/wakeup
|
|
|
|
This file is empty if the device does not support
|
|
remote wakeup. Otherwise the file contains either the
|
|
word "enabled" or the word "disabled", and you can
|
|
write those words to the file. The setting determines
|
|
whether or not remote wakeup will be enabled when the
|
|
device is next suspended. (If the setting is changed
|
|
while the device is suspended, the change won't take
|
|
effect until the following suspend.)
|
|
|
|
power/control
|
|
|
|
This file contains one of two words: "on" or "auto".
|
|
You can write those words to the file to change the
|
|
device's setting.
|
|
|
|
"on" means that the device should be resumed and
|
|
autosuspend is not allowed. (Of course, system
|
|
suspends are still allowed.)
|
|
|
|
"auto" is the normal state in which the kernel is
|
|
allowed to autosuspend and autoresume the device.
|
|
|
|
(In kernels up to 2.6.32, you could also specify
|
|
"suspend", meaning that the device should remain
|
|
suspended and autoresume was not allowed. This
|
|
setting is no longer supported.)
|
|
|
|
power/autosuspend_delay_ms
|
|
|
|
This file contains an integer value, which is the
|
|
number of milliseconds the device should remain idle
|
|
before the kernel will autosuspend it (the idle-delay
|
|
time). The default is 2000. 0 means to autosuspend
|
|
as soon as the device becomes idle, and negative
|
|
values mean never to autosuspend. You can write a
|
|
number to the file to change the autosuspend
|
|
idle-delay time.
|
|
|
|
Writing "-1" to power/autosuspend_delay_ms and writing "on" to
|
|
power/control do essentially the same thing -- they both prevent the
|
|
device from being autosuspended. Yes, this is a redundancy in the
|
|
API.
|
|
|
|
(In 2.6.21 writing "0" to power/autosuspend would prevent the device
|
|
from being autosuspended; the behavior was changed in 2.6.22. The
|
|
power/autosuspend attribute did not exist prior to 2.6.21, and the
|
|
power/level attribute did not exist prior to 2.6.22. power/control
|
|
was added in 2.6.34, and power/autosuspend_delay_ms was added in
|
|
2.6.37 but did not become functional until 2.6.38.)
|
|
|
|
|
|
Changing the default idle-delay time
|
|
------------------------------------
|
|
|
|
The default autosuspend idle-delay time (in seconds) is controlled by
|
|
a module parameter in usbcore. You can specify the value when usbcore
|
|
is loaded. For example, to set it to 5 seconds instead of 2 you would
|
|
do:
|
|
|
|
modprobe usbcore autosuspend=5
|
|
|
|
Equivalently, you could add to a configuration file in /etc/modprobe.d
|
|
a line saying:
|
|
|
|
options usbcore autosuspend=5
|
|
|
|
Some distributions load the usbcore module very early during the boot
|
|
process, by means of a program or script running from an initramfs
|
|
image. To alter the parameter value you would have to rebuild that
|
|
image.
|
|
|
|
If usbcore is compiled into the kernel rather than built as a loadable
|
|
module, you can add
|
|
|
|
usbcore.autosuspend=5
|
|
|
|
to the kernel's boot command line.
|
|
|
|
Finally, the parameter value can be changed while the system is
|
|
running. If you do:
|
|
|
|
echo 5 >/sys/module/usbcore/parameters/autosuspend
|
|
|
|
then each new USB device will have its autosuspend idle-delay
|
|
initialized to 5. (The idle-delay values for already existing devices
|
|
will not be affected.)
|
|
|
|
Setting the initial default idle-delay to -1 will prevent any
|
|
autosuspend of any USB device. This is a simple alternative to
|
|
disabling CONFIG_USB_SUSPEND and rebuilding the kernel, and it has the
|
|
added benefit of allowing you to enable autosuspend for selected
|
|
devices.
|
|
|
|
|
|
Warnings
|
|
--------
|
|
|
|
The USB specification states that all USB devices must support power
|
|
management. Nevertheless, the sad fact is that many devices do not
|
|
support it very well. You can suspend them all right, but when you
|
|
try to resume them they disconnect themselves from the USB bus or
|
|
they stop working entirely. This seems to be especially prevalent
|
|
among printers and scanners, but plenty of other types of device have
|
|
the same deficiency.
|
|
|
|
For this reason, by default the kernel disables autosuspend (the
|
|
power/control attribute is initialized to "on") for all devices other
|
|
than hubs. Hubs, at least, appear to be reasonably well-behaved in
|
|
this regard.
|
|
|
|
(In 2.6.21 and 2.6.22 this wasn't the case. Autosuspend was enabled
|
|
by default for almost all USB devices. A number of people experienced
|
|
problems as a result.)
|
|
|
|
This means that non-hub devices won't be autosuspended unless the user
|
|
or a program explicitly enables it. As of this writing there aren't
|
|
any widespread programs which will do this; we hope that in the near
|
|
future device managers such as HAL will take on this added
|
|
responsibility. In the meantime you can always carry out the
|
|
necessary operations by hand or add them to a udev script. You can
|
|
also change the idle-delay time; 2 seconds is not the best choice for
|
|
every device.
|
|
|
|
If a driver knows that its device has proper suspend/resume support,
|
|
it can enable autosuspend all by itself. For example, the video
|
|
driver for a laptop's webcam might do this (in recent kernels they
|
|
do), since these devices are rarely used and so should normally be
|
|
autosuspended.
|
|
|
|
Sometimes it turns out that even when a device does work okay with
|
|
autosuspend there are still problems. For example, the usbhid driver,
|
|
which manages keyboards and mice, has autosuspend support. Tests with
|
|
a number of keyboards show that typing on a suspended keyboard, while
|
|
causing the keyboard to do a remote wakeup all right, will nonetheless
|
|
frequently result in lost keystrokes. Tests with mice show that some
|
|
of them will issue a remote-wakeup request in response to button
|
|
presses but not to motion, and some in response to neither.
|
|
|
|
The kernel will not prevent you from enabling autosuspend on devices
|
|
that can't handle it. It is even possible in theory to damage a
|
|
device by suspending it at the wrong time. (Highly unlikely, but
|
|
possible.) Take care.
|
|
|
|
|
|
The driver interface for Power Management
|
|
-----------------------------------------
|
|
|
|
The requirements for a USB driver to support external power management
|
|
are pretty modest; the driver need only define
|
|
|
|
.suspend
|
|
.resume
|
|
.reset_resume
|
|
|
|
methods in its usb_driver structure, and the reset_resume method is
|
|
optional. The methods' jobs are quite simple:
|
|
|
|
The suspend method is called to warn the driver that the
|
|
device is going to be suspended. If the driver returns a
|
|
negative error code, the suspend will be aborted. Normally
|
|
the driver will return 0, in which case it must cancel all
|
|
outstanding URBs (usb_kill_urb()) and not submit any more.
|
|
|
|
The resume method is called to tell the driver that the
|
|
device has been resumed and the driver can return to normal
|
|
operation. URBs may once more be submitted.
|
|
|
|
The reset_resume method is called to tell the driver that
|
|
the device has been resumed and it also has been reset.
|
|
The driver should redo any necessary device initialization,
|
|
since the device has probably lost most or all of its state
|
|
(although the interfaces will be in the same altsettings as
|
|
before the suspend).
|
|
|
|
If the device is disconnected or powered down while it is suspended,
|
|
the disconnect method will be called instead of the resume or
|
|
reset_resume method. This is also quite likely to happen when
|
|
waking up from hibernation, as many systems do not maintain suspend
|
|
current to the USB host controllers during hibernation. (It's
|
|
possible to work around the hibernation-forces-disconnect problem by
|
|
using the USB Persist facility.)
|
|
|
|
The reset_resume method is used by the USB Persist facility (see
|
|
Documentation/usb/persist.txt) and it can also be used under certain
|
|
circumstances when CONFIG_USB_PERSIST is not enabled. Currently, if a
|
|
device is reset during a resume and the driver does not have a
|
|
reset_resume method, the driver won't receive any notification about
|
|
the resume. Later kernels will call the driver's disconnect method;
|
|
2.6.23 doesn't do this.
|
|
|
|
USB drivers are bound to interfaces, so their suspend and resume
|
|
methods get called when the interfaces are suspended or resumed. In
|
|
principle one might want to suspend some interfaces on a device (i.e.,
|
|
force the drivers for those interface to stop all activity) without
|
|
suspending the other interfaces. The USB core doesn't allow this; all
|
|
interfaces are suspended when the device itself is suspended and all
|
|
interfaces are resumed when the device is resumed. It isn't possible
|
|
to suspend or resume some but not all of a device's interfaces. The
|
|
closest you can come is to unbind the interfaces' drivers.
|
|
|
|
|
|
The driver interface for autosuspend and autoresume
|
|
---------------------------------------------------
|
|
|
|
To support autosuspend and autoresume, a driver should implement all
|
|
three of the methods listed above. In addition, a driver indicates
|
|
that it supports autosuspend by setting the .supports_autosuspend flag
|
|
in its usb_driver structure. It is then responsible for informing the
|
|
USB core whenever one of its interfaces becomes busy or idle. The
|
|
driver does so by calling these six functions:
|
|
|
|
int usb_autopm_get_interface(struct usb_interface *intf);
|
|
void usb_autopm_put_interface(struct usb_interface *intf);
|
|
int usb_autopm_get_interface_async(struct usb_interface *intf);
|
|
void usb_autopm_put_interface_async(struct usb_interface *intf);
|
|
void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
|
|
void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
|
|
|
|
The functions work by maintaining a usage counter in the
|
|
usb_interface's embedded device structure. When the counter is > 0
|
|
then the interface is deemed to be busy, and the kernel will not
|
|
autosuspend the interface's device. When the usage counter is = 0
|
|
then the interface is considered to be idle, and the kernel may
|
|
autosuspend the device.
|
|
|
|
Drivers need not be concerned about balancing changes to the usage
|
|
counter; the USB core will undo any remaining "get"s when a driver
|
|
is unbound from its interface. As a corollary, drivers must not call
|
|
any of the usb_autopm_* functions after their disconnect() routine has
|
|
returned.
|
|
|
|
Drivers using the async routines are responsible for their own
|
|
synchronization and mutual exclusion.
|
|
|
|
usb_autopm_get_interface() increments the usage counter and
|
|
does an autoresume if the device is suspended. If the
|
|
autoresume fails, the counter is decremented back.
|
|
|
|
usb_autopm_put_interface() decrements the usage counter and
|
|
attempts an autosuspend if the new value is = 0.
|
|
|
|
usb_autopm_get_interface_async() and
|
|
usb_autopm_put_interface_async() do almost the same things as
|
|
their non-async counterparts. The big difference is that they
|
|
use a workqueue to do the resume or suspend part of their
|
|
jobs. As a result they can be called in an atomic context,
|
|
such as an URB's completion handler, but when they return the
|
|
device will generally not yet be in the desired state.
|
|
|
|
usb_autopm_get_interface_no_resume() and
|
|
usb_autopm_put_interface_no_suspend() merely increment or
|
|
decrement the usage counter; they do not attempt to carry out
|
|
an autoresume or an autosuspend. Hence they can be called in
|
|
an atomic context.
|
|
|
|
The simplest usage pattern is that a driver calls
|
|
usb_autopm_get_interface() in its open routine and
|
|
usb_autopm_put_interface() in its close or release routine. But other
|
|
patterns are possible.
|
|
|
|
The autosuspend attempts mentioned above will often fail for one
|
|
reason or another. For example, the power/control attribute might be
|
|
set to "on", or another interface in the same device might not be
|
|
idle. This is perfectly normal. If the reason for failure was that
|
|
the device hasn't been idle for long enough, a timer is scheduled to
|
|
carry out the operation automatically when the autosuspend idle-delay
|
|
has expired.
|
|
|
|
Autoresume attempts also can fail, although failure would mean that
|
|
the device is no longer present or operating properly. Unlike
|
|
autosuspend, there's no idle-delay for an autoresume.
|
|
|
|
|
|
Other parts of the driver interface
|
|
-----------------------------------
|
|
|
|
Drivers can enable autosuspend for their devices by calling
|
|
|
|
usb_enable_autosuspend(struct usb_device *udev);
|
|
|
|
in their probe() routine, if they know that the device is capable of
|
|
suspending and resuming correctly. This is exactly equivalent to
|
|
writing "auto" to the device's power/control attribute. Likewise,
|
|
drivers can disable autosuspend by calling
|
|
|
|
usb_disable_autosuspend(struct usb_device *udev);
|
|
|
|
This is exactly the same as writing "on" to the power/control attribute.
|
|
|
|
Sometimes a driver needs to make sure that remote wakeup is enabled
|
|
during autosuspend. For example, there's not much point
|
|
autosuspending a keyboard if the user can't cause the keyboard to do a
|
|
remote wakeup by typing on it. If the driver sets
|
|
intf->needs_remote_wakeup to 1, the kernel won't autosuspend the
|
|
device if remote wakeup isn't available. (If the device is already
|
|
autosuspended, though, setting this flag won't cause the kernel to
|
|
autoresume it. Normally a driver would set this flag in its probe
|
|
method, at which time the device is guaranteed not to be
|
|
autosuspended.)
|
|
|
|
If a driver does its I/O asynchronously in interrupt context, it
|
|
should call usb_autopm_get_interface_async() before starting output and
|
|
usb_autopm_put_interface_async() when the output queue drains. When
|
|
it receives an input event, it should call
|
|
|
|
usb_mark_last_busy(struct usb_device *udev);
|
|
|
|
in the event handler. This tells the PM core that the device was just
|
|
busy and therefore the next autosuspend idle-delay expiration should
|
|
be pushed back. Many of the usb_autopm_* routines also make this call,
|
|
so drivers need to worry only when interrupt-driven input arrives.
|
|
|
|
Asynchronous operation is always subject to races. For example, a
|
|
driver may call the usb_autopm_get_interface_async() routine at a time
|
|
when the core has just finished deciding the device has been idle for
|
|
long enough but not yet gotten around to calling the driver's suspend
|
|
method. The suspend method must be responsible for synchronizing with
|
|
the I/O request routine and the URB completion handler; it should
|
|
cause autosuspends to fail with -EBUSY if the driver needs to use the
|
|
device.
|
|
|
|
External suspend calls should never be allowed to fail in this way,
|
|
only autosuspend calls. The driver can tell them apart by applying
|
|
the PMSG_IS_AUTO() macro to the message argument to the suspend
|
|
method; it will return True for internal PM events (autosuspend) and
|
|
False for external PM events.
|
|
|
|
|
|
Mutual exclusion
|
|
----------------
|
|
|
|
For external events -- but not necessarily for autosuspend or
|
|
autoresume -- the device semaphore (udev->dev.sem) will be held when a
|
|
suspend or resume method is called. This implies that external
|
|
suspend/resume events are mutually exclusive with calls to probe,
|
|
disconnect, pre_reset, and post_reset; the USB core guarantees that
|
|
this is true of autosuspend/autoresume events as well.
|
|
|
|
If a driver wants to block all suspend/resume calls during some
|
|
critical section, the best way is to lock the device and call
|
|
usb_autopm_get_interface() (and do the reverse at the end of the
|
|
critical section). Holding the device semaphore will block all
|
|
external PM calls, and the usb_autopm_get_interface() will prevent any
|
|
internal PM calls, even if it fails. (Exercise: Why?)
|
|
|
|
|
|
Interaction between dynamic PM and system PM
|
|
--------------------------------------------
|
|
|
|
Dynamic power management and system power management can interact in
|
|
a couple of ways.
|
|
|
|
Firstly, a device may already be autosuspended when a system suspend
|
|
occurs. Since system suspends are supposed to be as transparent as
|
|
possible, the device should remain suspended following the system
|
|
resume. But this theory may not work out well in practice; over time
|
|
the kernel's behavior in this regard has changed. As of 2.6.37 the
|
|
policy is to resume all devices during a system resume and let them
|
|
handle their own runtime suspends afterward.
|
|
|
|
Secondly, a dynamic power-management event may occur as a system
|
|
suspend is underway. The window for this is short, since system
|
|
suspends don't take long (a few seconds usually), but it can happen.
|
|
For example, a suspended device may send a remote-wakeup signal while
|
|
the system is suspending. The remote wakeup may succeed, which would
|
|
cause the system suspend to abort. If the remote wakeup doesn't
|
|
succeed, it may still remain active and thus cause the system to
|
|
resume as soon as the system suspend is complete. Or the remote
|
|
wakeup may fail and get lost. Which outcome occurs depends on timing
|
|
and on the hardware and firmware design.
|
|
|
|
|
|
xHCI hardware link PM
|
|
---------------------
|
|
|
|
xHCI host controller provides hardware link power management to usb2.0
|
|
(xHCI 1.0 feature) and usb3.0 devices which support link PM. By
|
|
enabling hardware LPM, the host can automatically put the device into
|
|
lower power state(L1 for usb2.0 devices, or U1/U2 for usb3.0 devices),
|
|
which state device can enter and resume very quickly.
|
|
|
|
The user interface for controlling USB2 hardware LPM is located in the
|
|
power/ subdirectory of each USB device's sysfs directory, that is, in
|
|
/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The
|
|
relevant attribute files is usb2_hardware_lpm.
|
|
|
|
power/usb2_hardware_lpm
|
|
|
|
When a USB2 device which support LPM is plugged to a
|
|
xHCI host root hub which support software LPM, the
|
|
host will run a software LPM test for it; if the device
|
|
enters L1 state and resume successfully and the host
|
|
supports USB2 hardware LPM, this file will show up and
|
|
driver will enable hardware LPM for the device. You
|
|
can write y/Y/1 or n/N/0 to the file to enable/disable
|
|
USB2 hardware LPM manually. This is for test purpose mainly.
|