linux/drivers/usb/host/ehci-cns3xxx.c
Joe Perches 28f65c11f2 treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-10 14:55:36 +02:00

171 lines
4.2 KiB
C

/*
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/atomic.h>
#include <mach/cns3xxx.h>
#include <mach/pm.h>
static int cns3xxx_ehci_init(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
/*
* EHCI and OHCI share the same clock and power,
* resetting twice would cause the 1st controller been reset.
* Therefore only do power up at the first up device, and
* power down at the last down device.
*
* Set USB AHB INCR length to 16
*/
if (atomic_inc_return(&usb_pwr_ref) == 1) {
cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
MISC_CHIP_CONFIG_REG);
}
ehci->caps = hcd->regs;
ehci->regs = hcd->regs
+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
hcd->has_tt = 0;
ehci_reset(ehci);
retval = ehci_init(hcd);
if (retval)
return retval;
ehci_port_power(ehci, 0);
return retval;
}
static const struct hc_driver cns3xxx_ehci_hc_driver = {
.description = hcd_name,
.product_desc = "CNS3XXX EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2,
.reset = cns3xxx_ehci_init,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
.get_frame_number = ehci_get_frame,
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int cns3xxx_ehci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_hcd *hcd;
const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
struct resource *res;
int irq;
int retval;
if (usb_disabled())
return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(dev, "Found HC with no IRQ.\n");
return -ENODEV;
}
irq = res->start;
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "Found HC with no register addr.\n");
retval = -ENODEV;
goto err1;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
dev_dbg(dev, "controller already in use\n");
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(dev, "error mapping memory\n");
retval = -EFAULT;
goto err2;
}
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval == 0)
return retval;
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
return retval;
}
static int cns3xxx_ehci_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
/*
* EHCI and OHCI share the same clock and power,
* resetting twice would cause the 1st controller been reset.
* Therefore only do power up at the first up device, and
* power down at the last down device.
*/
if (atomic_dec_return(&usb_pwr_ref) == 0)
cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
usb_put_hcd(hcd);
platform_set_drvdata(pdev, NULL);
return 0;
}
MODULE_ALIAS("platform:cns3xxx-ehci");
static struct platform_driver cns3xxx_ehci_driver = {
.probe = cns3xxx_ehci_probe,
.remove = cns3xxx_ehci_remove,
.driver = {
.name = "cns3xxx-ehci",
},
};