linux/arch/powerpc/platforms/52xx/lite5200_pm.c
Rafael J. Wysocki e6c5eb9541 PM: Rework struct platform_suspend_ops
There is no reason why the .prepare() and .finish() methods in 'struct
platform_suspend_ops' should take any arguments, since architectures don't use
these methods' argument in any practically meaningful way (ie.  either the
target system sleep state is conveyed to the platform by .set_target(), or
there is only one suspend state supported and it is indicated to the PM core
by .valid(), or .prepare() and .finish() aren't defined at all).   There also
is no reason why .finish() should return any result.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:18 -07:00

223 lines
5.5 KiB
C

#include <linux/init.h>
#include <linux/suspend.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/mpc52xx.h>
#include "mpc52xx_pic.h"
/* defined in lite5200_sleep.S and only used here */
extern void lite5200_low_power(void __iomem *sram, void __iomem *mbar);
static struct mpc52xx_cdm __iomem *cdm;
static struct mpc52xx_intr __iomem *pic;
static struct mpc52xx_sdma __iomem *bes;
static struct mpc52xx_xlb __iomem *xlb;
static struct mpc52xx_gpio __iomem *gps;
static struct mpc52xx_gpio_wkup __iomem *gpw;
static void __iomem *sram;
static const int sram_size = 0x4000; /* 16 kBytes */
static void __iomem *mbar;
static suspend_state_t lite5200_pm_target_state;
static int lite5200_pm_valid(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
return 1;
default:
return 0;
}
}
static int lite5200_pm_set_target(suspend_state_t state)
{
if (lite5200_pm_valid(state)) {
lite5200_pm_target_state = state;
return 0;
}
return -EINVAL;
}
static int lite5200_pm_prepare(void)
{
/* deep sleep? let mpc52xx code handle that */
if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
return mpc52xx_pm_prepare();
if (lite5200_pm_target_state != PM_SUSPEND_MEM)
return -EINVAL;
/* map registers */
mbar = mpc52xx_find_and_map("mpc5200");
if (!mbar) {
printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
return -ENOSYS;
}
cdm = mbar + 0x200;
pic = mbar + 0x500;
gps = mbar + 0xb00;
gpw = mbar + 0xc00;
bes = mbar + 0x1200;
xlb = mbar + 0x1f00;
sram = mbar + 0x8000;
return 0;
}
/* save and restore registers not bound to any real devices */
static struct mpc52xx_cdm scdm;
static struct mpc52xx_intr spic;
static struct mpc52xx_sdma sbes;
static struct mpc52xx_xlb sxlb;
static struct mpc52xx_gpio sgps;
static struct mpc52xx_gpio_wkup sgpw;
static void lite5200_save_regs(void)
{
_memcpy_fromio(&spic, pic, sizeof(*pic));
_memcpy_fromio(&sbes, bes, sizeof(*bes));
_memcpy_fromio(&scdm, cdm, sizeof(*cdm));
_memcpy_fromio(&sxlb, xlb, sizeof(*xlb));
_memcpy_fromio(&sgps, gps, sizeof(*gps));
_memcpy_fromio(&sgpw, gpw, sizeof(*gpw));
_memcpy_fromio(saved_sram, sram, sram_size);
}
static void lite5200_restore_regs(void)
{
int i;
_memcpy_toio(sram, saved_sram, sram_size);
/*
* GPIOs. Interrupt Master Enable has higher address then other
* registers, so just memcpy is ok.
*/
_memcpy_toio(gpw, &sgpw, sizeof(*gpw));
_memcpy_toio(gps, &sgps, sizeof(*gps));
/* XLB Arbitrer */
out_be32(&xlb->snoop_window, sxlb.snoop_window);
out_be32(&xlb->master_priority, sxlb.master_priority);
out_be32(&xlb->master_pri_enable, sxlb.master_pri_enable);
/* enable */
out_be32(&xlb->int_enable, sxlb.int_enable);
out_be32(&xlb->config, sxlb.config);
/* CDM - Clock Distribution Module */
out_8(&cdm->ipb_clk_sel, scdm.ipb_clk_sel);
out_8(&cdm->pci_clk_sel, scdm.pci_clk_sel);
out_8(&cdm->ext_48mhz_en, scdm.ext_48mhz_en);
out_8(&cdm->fd_enable, scdm.fd_enable);
out_be16(&cdm->fd_counters, scdm.fd_counters);
out_be32(&cdm->clk_enables, scdm.clk_enables);
out_8(&cdm->osc_disable, scdm.osc_disable);
out_be16(&cdm->mclken_div_psc1, scdm.mclken_div_psc1);
out_be16(&cdm->mclken_div_psc2, scdm.mclken_div_psc2);
out_be16(&cdm->mclken_div_psc3, scdm.mclken_div_psc3);
out_be16(&cdm->mclken_div_psc6, scdm.mclken_div_psc6);
/* BESTCOMM */
out_be32(&bes->taskBar, sbes.taskBar);
out_be32(&bes->currentPointer, sbes.currentPointer);
out_be32(&bes->endPointer, sbes.endPointer);
out_be32(&bes->variablePointer, sbes.variablePointer);
out_8(&bes->IntVect1, sbes.IntVect1);
out_8(&bes->IntVect2, sbes.IntVect2);
out_be16(&bes->PtdCntrl, sbes.PtdCntrl);
for (i=0; i<32; i++)
out_8(&bes->ipr[i], sbes.ipr[i]);
out_be32(&bes->cReqSelect, sbes.cReqSelect);
out_be32(&bes->task_size0, sbes.task_size0);
out_be32(&bes->task_size1, sbes.task_size1);
out_be32(&bes->MDEDebug, sbes.MDEDebug);
out_be32(&bes->ADSDebug, sbes.ADSDebug);
out_be32(&bes->Value1, sbes.Value1);
out_be32(&bes->Value2, sbes.Value2);
out_be32(&bes->Control, sbes.Control);
out_be32(&bes->Status, sbes.Status);
out_be32(&bes->PTDDebug, sbes.PTDDebug);
/* restore tasks */
for (i=0; i<16; i++)
out_be16(&bes->tcr[i], sbes.tcr[i]);
/* enable interrupts */
out_be32(&bes->IntPend, sbes.IntPend);
out_be32(&bes->IntMask, sbes.IntMask);
/* PIC */
out_be32(&pic->per_pri1, spic.per_pri1);
out_be32(&pic->per_pri2, spic.per_pri2);
out_be32(&pic->per_pri3, spic.per_pri3);
out_be32(&pic->main_pri1, spic.main_pri1);
out_be32(&pic->main_pri2, spic.main_pri2);
out_be32(&pic->enc_status, spic.enc_status);
/* unmask and enable interrupts */
out_be32(&pic->per_mask, spic.per_mask);
out_be32(&pic->main_mask, spic.main_mask);
out_be32(&pic->ctrl, spic.ctrl);
}
static int lite5200_pm_enter(suspend_state_t state)
{
/* deep sleep? let mpc52xx code handle that */
if (state == PM_SUSPEND_STANDBY) {
return mpc52xx_pm_enter(state);
}
lite5200_save_regs();
/* effectively save FP regs */
enable_kernel_fp();
lite5200_low_power(sram, mbar);
lite5200_restore_regs();
/* restart jiffies */
wakeup_decrementer();
iounmap(mbar);
return 0;
}
static void lite5200_pm_finish(void)
{
/* deep sleep? let mpc52xx code handle that */
if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
mpc52xx_pm_finish();
}
static struct platform_suspend_ops lite5200_pm_ops = {
.valid = lite5200_pm_valid,
.set_target = lite5200_pm_set_target,
.prepare = lite5200_pm_prepare,
.enter = lite5200_pm_enter,
.finish = lite5200_pm_finish,
};
int __init lite5200_pm_init(void)
{
suspend_set_ops(&lite5200_pm_ops);
return 0;
}