q3k
/
linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux/drivers/mtd/nand
History
Scott Wood 874d72c4fe mtd: elbc nand: use drvdata to only remove the relevant chip 
Previously the remove method was looping and removing all chips,
which is obviously not the right thing to do — left over from when
the driver was organized differently and that was the remove method for
the entire controller.  This would result in bad things happening if
you have more than one NAND chip, and remove the module.

This also fixes priv->dev to properly point to the chip's device rather than
the controller's.  Until now priv->dev was only used for error/debug prints
(and it's an improvement there), so this shouldn't break anything.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
 		2012-07-06 18:17:05 +01:00
..
gpmi-nand mtd: nand: gpmi: need to use {read,write}_oob_raw 2012-07-06 18:17:02 +01:00
Kconfig mtd: nand: omap: add support for hardware BCH ecc 2012-05-13 23:25:51 -05:00
Makefile MTD merge for 3.4 2012-03-30 17:31:56 -07:00
alauda.c mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN 2012-05-13 23:14:23 -05:00
ams-delta.c mtd: ams-delta: fix request_mem_region() failure 2012-05-08 16:24:33 -05:00
atmel_nand.c mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces 2012-05-13 23:20:00 -05:00
atmel_nand_ecc.h
…
au1550nd.c mtd: nand: kill NAND_NO_AUTOINCR option 2012-05-13 23:15:38 -05:00
autcpu12.c ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset 2012-05-11 16:18:01 +02:00
bcm_umi_bch.c mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces 2012-05-13 23:20:00 -05:00
bcm_umi_nand.c mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces 2012-05-13 23:20:00 -05:00
bf5xx_nand.c mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces 2012-05-13 23:20:00 -05:00
cafe_nand.c mtd: cafe_nand: spelling mistake 2012-07-06 18:17:02 +01:00
cmx270_nand.c mtd: do not use plain 0 as NULL 2012-03-27 00:53:20 +01:00
cs553x_nand.c mtd: nand: kill NAND_NO_AUTOINCR option 2012-05-13 23:15:38 -05:00
davinci_nand.c mtd: flash drivers set ecc strength 2012-03-27 00:56:46 +01:00
denali.c mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' 2012-05-13 23:24:40 -05:00
denali.h mtd: denali: detect the number of banks 2011-05-25 02:02:12 +01:00
diskonchip.c mtd: flash drivers set ecc strength 2012-03-27 00:56:46 +01:00
docg4.c mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' 2012-05-13 23:24:40 -05:00
fsl_elbc_nand.c mtd: elbc nand: use drvdata to only remove the relevant chip 2012-07-06 18:17:05 +01:00
fsl_ifc_nand.c mtd: nand: kill NAND_NO_READRDY 2012-07-06 18:17:05 +01:00
fsl_upm.c mtd: convert drivers/mtd/* to use module_platform_driver() 2012-01-09 18:12:35 +00:00
fsmc_nand.c mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces 2012-05-13 23:20:00 -05:00
gpio.c mtd: gpio-nand: add device tree bindings 2012-01-09 18:23:58 +00:00
h1910.c - More robust parsing especially of xattr data in JFFS2 2012-06-01 16:55:42 -07:00
jz4740_nand.c mtd: nand: fix incorrect ecc strength values 2012-05-13 23:10:28 -05:00
mpc5121_nfc.c mtd: nand: kill NAND_NO_AUTOINCR option 2012-05-13 23:15:38 -05:00
mxc_nand.c nand: mxc_nand: Use clk_prepare_enable/clk_disable_unprepare 2012-07-06 18:17:05 +01:00
nand_base.c mtd: nand: kill NAND_NO_READRDY 2012-07-06 18:17:05 +01:00
nand_bbt.c mtd: nand: fix scan_read_raw_oob 2012-05-29 11:14:58 +03:00
nand_bch.c mtd: cleanup style on pr_debug messages 2011-09-11 15:02:16 +03:00
nand_bcm_umi.c
…
nand_bcm_umi.h
…
nand_ecc.c mtd: spelling, capitalization, uniformity 2011-09-11 15:02:13 +03:00
nand_ids.c mtd: nand: kill NAND_NO_READRDY 2012-07-06 18:17:05 +01:00
nandsim.c mtd: nandsim: don't open code a do_div helper 2012-07-06 16:59:33 +01:00
ndfc.c mtd: flash drivers set ecc strength 2012-03-27 00:56:46 +01:00
nomadik_nand.c mtd: introduce mtd_resume interface 2012-01-09 18:25:46 +00:00
nuc900_nand.c mtd: convert drivers/mtd/* to use module_platform_driver() 2012-01-09 18:12:35 +00:00
omap2.c mtd: nand: omap: add support for hardware BCH ecc 2012-05-13 23:25:51 -05:00
orion_nand.c arm-soc: clock driver changes 2012-05-26 12:42:29 -07:00
pasemi_nand.c mtd: nand: kill NAND_NO_AUTOINCR option 2012-05-13 23:15:38 -05:00
plat_nand.c mtd: add read_byte support to plat_nand 2012-05-13 23:16:53 -05:00
ppchameleonevb.c mtd: do not use plain 0 as NULL 2012-03-27 00:53:20 +01:00
pxa3xx_nand.c mtd: nand: kill NAND_NO_READRDY 2012-07-06 18:17:05 +01:00
r852.c mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' 2012-05-13 23:24:40 -05:00
r852.h mtd: r852: remove useless pci powerup/down from suspend/resume routines 2010-10-25 01:32:21 +01:00
rtc_from4.c mtd: flash drivers set ecc strength 2012-03-27 00:56:46 +01:00
s3c2410.c mtd: flash drivers set ecc strength 2012-03-27 00:56:46 +01:00
sh_flctl.c mtd: sh_flctl: Use user oob data in hardware ECC mode 2012-07-06 18:17:04 +01:00
sharpsl.c mtd: flash drivers set ecc strength 2012-03-27 00:56:46 +01:00
sm_common.c mtd: nand: kill NAND_NO_AUTOINCR option 2012-05-13 23:15:38 -05:00
sm_common.h mtd: sm_common: split smartmedia and xD table 2010-05-14 01:03:46 +01:00
socrates_nand.c mtd: convert drivers/mtd/* to use module_platform_driver() 2012-01-09 18:12:35 +00:00
spia.c mtd: convert remaining users to mtd_device_register() 2011-05-25 02:25:00 +01:00
tmio_nand.c mtd: flash drivers set ecc strength 2012-03-27 00:56:46 +01:00
txx9ndfmc.c mtd: flash drivers set ecc strength 2012-03-27 00:56:46 +01:00