linux/arch/arm/mach-s3c2410/mach-bast.c

603 lines
15 KiB
C

/* linux/arch/arm/mach-s3c2410/mach-bast.c
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
#include <net/ax88796.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/bast-map.h>
#include <asm/arch/bast-irq.h>
#include <asm/arch/bast-cpld.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
#include <asm/plat-s3c/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c/iic.h>
#include <asm/arch/fb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/serial_8250.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
#include "usb-simtec.h"
#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
/* macros to modify the physical addresses for io space */
#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
static struct map_desc bast_iodesc[] __initdata = {
/* ISA IO areas */
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = PA_CS2(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = PA_CS3(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
},
/* bast CPLD control registers, and external interrupt controls */
{
.virtual = (u32)BAST_VA_CTRL1,
.pfn = __phys_to_pfn(BAST_PA_CTRL1),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL2,
.pfn = __phys_to_pfn(BAST_PA_CTRL2),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL3,
.pfn = __phys_to_pfn(BAST_PA_CTRL3),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL4,
.pfn = __phys_to_pfn(BAST_PA_CTRL4),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* PC104 IRQ mux */
{
.virtual = (u32)BAST_VA_PC104_IRQREQ,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_PC104_IRQRAW,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_PC104_IRQMASK,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* peripheral space... one for each of fast/slow/byte/16bit */
/* note, ide is only decoded in word space, even though some registers
* are only 8bit */
/* slow, byte */
{ VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
{ VA_C2(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C2(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C2(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
{ VA_C2(BAST_VA_IDESECAUX), PA_CS3(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* slow, word */
{ VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
{ VA_C3(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C3(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C3(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
{ VA_C3(BAST_VA_IDESECAUX), PA_CS3(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* fast, byte */
{ VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
{ VA_C4(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C4(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C4(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
{ VA_C4(BAST_VA_IDESECAUX), PA_CS5(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* fast, word */
{ VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
{ VA_C5(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C5(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C5(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
{ VA_C5(BAST_VA_IDESECAUX), PA_CS5(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
[0] = {
.name = "uclk",
.divisor = 1,
.min_baud = 0,
.max_baud = 0,
},
[1] = {
.name = "pclk",
.divisor = 1,
.min_baud = 0,
.max_baud = 0,
}
};
static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
/* port 2 is not actually used */
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
}
};
/* NOR Flash on BAST board */
static struct resource bast_nor_resource[] = {
[0] = {
.start = S3C2410_CS1 + 0x4000000,
.end = S3C2410_CS1 + 0x4000000 + (32*1024*1024) - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device bast_device_nor = {
.name = "bast-nor",
.id = -1,
.num_resources = ARRAY_SIZE(bast_nor_resource),
.resource = bast_nor_resource,
};
/* NAND Flash on BAST board */
static int smartmedia_map[] = { 0 };
static int chip0_map[] = { 1 };
static int chip1_map[] = { 2 };
static int chip2_map[] = { 3 };
static struct mtd_partition bast_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
.offset = 0,
},
[1] = {
.name = "/boot",
.size = SZ_4M - SZ_16K,
.offset = SZ_16K,
},
[2] = {
.name = "user",
.offset = SZ_4M,
.size = MTDPART_SIZ_FULL,
}
};
/* the bast has 4 selectable slots for nand-flash, the three
* on-board chip areas, as well as the external SmartMedia
* slot.
*
* Note, there is no current hot-plug support for the SmartMedia
* socket.
*/
static struct s3c2410_nand_set bast_nand_sets[] = {
[0] = {
.name = "SmartMedia",
.nr_chips = 1,
.nr_map = smartmedia_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
},
[1] = {
.name = "chip0",
.nr_chips = 1,
.nr_map = chip0_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
},
[2] = {
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
},
[3] = {
.name = "chip2",
.nr_chips = 1,
.nr_map = chip2_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
}
};
static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
{
unsigned int tmp;
slot = set->nr_map[slot] & 3;
pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
slot, set, set->nr_map);
tmp = __raw_readb(BAST_VA_CTRL2);
tmp &= BAST_CPLD_CTLR2_IDERST;
tmp |= slot;
tmp |= BAST_CPLD_CTRL2_WNAND;
pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
__raw_writeb(tmp, BAST_VA_CTRL2);
}
static struct s3c2410_platform_nand bast_nand_info = {
.tacls = 30,
.twrph0 = 60,
.twrph1 = 60,
.nr_sets = ARRAY_SIZE(bast_nand_sets),
.sets = bast_nand_sets,
.select_chip = bast_nand_select,
};
/* DM9000 */
static struct resource bast_dm9k_resource[] = {
[0] = {
.start = S3C2410_CS5 + BAST_PA_DM9000,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 3,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
.flags = IORESOURCE_IRQ,
}
};
/* for the moment we limit ourselves to 16bit IO until some
* better IO routines can be written and tested
*/
static struct dm9000_plat_data bast_dm9k_platdata = {
.flags = DM9000_PLATF_16BITONLY,
};
static struct platform_device bast_device_dm9k = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(bast_dm9k_resource),
.resource = bast_dm9k_resource,
.dev = {
.platform_data = &bast_dm9k_platdata,
}
};
/* serial devices */
#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
#define SERIAL_CLK (1843200)
static struct plat_serial8250_port bast_sio_data[] = {
[0] = {
.mapbase = SERIAL_BASE + 0x2f8,
.irq = IRQ_PCSERIAL1,
.flags = SERIAL_FLAGS,
.iotype = UPIO_MEM,
.regshift = 0,
.uartclk = SERIAL_CLK,
},
[1] = {
.mapbase = SERIAL_BASE + 0x3f8,
.irq = IRQ_PCSERIAL2,
.flags = SERIAL_FLAGS,
.iotype = UPIO_MEM,
.regshift = 0,
.uartclk = SERIAL_CLK,
},
{ }
};
static struct platform_device bast_sio = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = &bast_sio_data,
},
};
/* we have devices on the bus which cannot work much over the
* standard 100KHz i2c bus frequency
*/
static struct s3c2410_platform_i2c bast_i2c_info = {
.flags = 0,
.slave_addr = 0x10,
.bus_freq = 100*1000,
.max_freq = 130*1000,
};
/* Asix AX88796 10/100 ethernet controller */
static struct ax_plat_data bast_asix_platdata = {
.flags = AXFLG_MAC_FROMDEV,
.wordlength = 2,
.dcr_val = 0x48,
.rcr_val = 0x40,
};
static struct resource bast_asix_resource[] = {
[0] = {
.start = S3C2410_CS5 + BAST_PA_ASIXNET,
.end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
.end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_ASIX,
.end = IRQ_ASIX,
.flags = IORESOURCE_IRQ
}
};
static struct platform_device bast_device_asix = {
.name = "ax88796",
.id = 0,
.num_resources = ARRAY_SIZE(bast_asix_resource),
.resource = bast_asix_resource,
.dev = {
.platform_data = &bast_asix_platdata
}
};
/* Asix AX88796 10/100 ethernet controller parallel port */
static struct resource bast_asixpp_resource[] = {
[0] = {
.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20),
.end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device bast_device_axpp = {
.name = "ax88796-pp",
.id = 0,
.num_resources = ARRAY_SIZE(bast_asixpp_resource),
.resource = bast_asixpp_resource,
};
/* LCD/VGA controller */
static struct s3c2410fb_display __initdata bast_lcd_info[] = {
{
.type = S3C2410_LCDCON1_TFT,
.width = 640,
.height = 480,
.pixclock = 33333,
.xres = 640,
.yres = 480,
.bpp = 4,
.left_margin = 40,
.right_margin = 20,
.hsync_len = 88,
.upper_margin = 30,
.lower_margin = 32,
.vsync_len = 3,
.lcdcon5 = 0x00014b02,
},
{
.type = S3C2410_LCDCON1_TFT,
.width = 640,
.height = 480,
.pixclock = 33333,
.xres = 640,
.yres = 480,
.bpp = 8,
.left_margin = 40,
.right_margin = 20,
.hsync_len = 88,
.upper_margin = 30,
.lower_margin = 32,
.vsync_len = 3,
.lcdcon5 = 0x00014b02,
},
{
.type = S3C2410_LCDCON1_TFT,
.width = 640,
.height = 480,
.pixclock = 33333,
.xres = 640,
.yres = 480,
.bpp = 16,
.left_margin = 40,
.right_margin = 20,
.hsync_len = 88,
.upper_margin = 30,
.lower_margin = 32,
.vsync_len = 3,
.lcdcon5 = 0x00014b02,
},
};
/* LCD/VGA controller */
static struct s3c2410fb_mach_info __initdata bast_fb_info = {
.displays = bast_lcd_info,
.num_displays = ARRAY_SIZE(bast_lcd_info),
.default_display = 1,
};
/* Standard BAST devices */
static struct platform_device *bast_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_rtc,
&s3c_device_nand,
&bast_device_nor,
&bast_device_dm9k,
&bast_device_asix,
&bast_device_axpp,
&bast_sio,
};
static struct clk *bast_clocks[] = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
&s3c24xx_clkout1,
&s3c24xx_uclk,
};
static void __init bast_map_io(void)
{
/* initialise the clocks */
s3c24xx_dclk0.parent = NULL;
s3c24xx_dclk0.rate = 12*1000*1000;
s3c24xx_dclk1.parent = NULL;
s3c24xx_dclk1.rate = 24*1000*1000;
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
s3c_device_nand.dev.platform_data = &bast_nand_info;
s3c_device_i2c.dev.platform_data = &bast_i2c_info;
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
usb_simtec_init();
}
static void __init bast_init(void)
{
s3c24xx_fb_set_platdata(&bast_fb_info);
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
}
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
.timer = &s3c24xx_timer,
MACHINE_END