linux/arch/arm/mach-sa1100/cerf.c
Russell King 65f2e753f1 Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus."
This reverts commit 5dd7bf59e0.

Conflicts:

	scripts/mod/file2alias.c

This change is wrong on many levels.  First and foremost, it causes a
regression.  On boot on Assabet, which this patch gives a codec id of
'ucb1x00', it gives:

	ucb1x00 ID not found: 1005

0x1005 is a valid ID for the UCB1300 device.

Secondly, this patch is way over the top in terms of complexity.  The
only device which has been seen to be connected with this MCP code is
the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same
driver.  Adding a match table, requiring the codec string to match the
hardware ID read out of the ID register, etc is completely over the top
when we can just read the hardware ID register.
2012-01-20 17:38:58 +00:00

143 lines
3.3 KiB
C

/*
* linux/arch/arm/mach-sa1100/cerf.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Apr-2003 : Removed some old PDA crud [FB]
* Oct-2003 : Added uart2 resource [FB]
* Jan-2004 : Removed io map for flash [FB]
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <mach/cerf.h>
#include <mach/mcp.h>
#include "generic.h"
static struct resource cerfuart2_resources[] = {
[0] = {
.start = 0x80030000,
.end = 0x8003ffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device cerfuart2_device = {
.name = "sa11x0-uart",
.id = 2,
.num_resources = ARRAY_SIZE(cerfuart2_resources),
.resource = cerfuart2_resources,
};
static struct platform_device *cerf_devices[] __initdata = {
&cerfuart2_device,
};
#ifdef CONFIG_SA1100_CERF_FLASH_32MB
# define CERF_FLASH_SIZE 0x02000000
#elif defined CONFIG_SA1100_CERF_FLASH_16MB
# define CERF_FLASH_SIZE 0x01000000
#elif defined CONFIG_SA1100_CERF_FLASH_8MB
# define CERF_FLASH_SIZE 0x00800000
#else
# error "Undefined flash size for CERF"
#endif
static struct mtd_partition cerf_partitions[] = {
{
.name = "Bootloader",
.size = 0x00020000,
.offset = 0x00000000,
}, {
.name = "Params",
.size = 0x00040000,
.offset = 0x00020000,
}, {
.name = "Kernel",
.size = 0x00100000,
.offset = 0x00060000,
}, {
.name = "Filesystem",
.size = CERF_FLASH_SIZE-0x00160000,
.offset = 0x00160000,
}
};
static struct flash_platform_data cerf_flash_data = {
.map_name = "cfi_probe",
.parts = cerf_partitions,
.nr_parts = ARRAY_SIZE(cerf_partitions),
};
static struct resource cerf_flash_resource = {
.start = SA1100_CS0_PHYS,
.end = SA1100_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static void __init cerf_init_irq(void)
{
sa1100_init_irq();
irq_set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
}
static struct map_desc cerf_io_desc[] __initdata = {
{ /* Crystal Ethernet Chip */
.virtual = 0xf0000000,
.pfn = __phys_to_pfn(0x08000000),
.length = 0x00100000,
.type = MT_DEVICE
}
};
static void __init cerf_map_io(void)
{
sa1100_map_io();
iotable_init(cerf_io_desc, ARRAY_SIZE(cerf_io_desc));
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 2); /* disable this and the uart2 device for sa1100_fir */
sa1100_register_uart(2, 1);
/* set some GPDR bits here while it's safe */
GPDR |= CERF_GPIO_CF_RESET;
}
static struct mcp_plat_data cerf_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
static void __init cerf_init(void)
{
platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
sa11x0_register_mcp(&cerf_mcp_data);
}
MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
/* Maintainer: support@intrinsyc.com */
.map_io = cerf_map_io,
.init_irq = cerf_init_irq,
.timer = &sa1100_timer,
.init_machine = cerf_init,
.restart = sa11x0_restart,
MACHINE_END