linux/drivers/net/wimax/i2400m/usb-notif.c
Inaky Perez-Gonzalez a8ebf98f54 i2400m/USB: TX and RX path backends
Implements the backend so that the generic driver can TX/RX to/from
the USB device.

TX is implemented with a kthread sitting in a never-ending loop that
when kicked by the generic driver's TX code will pull data from the TX
FIFO and send it to the device until it drains it. Then it goes back
sleep, waiting for another kick.

RX is implemented in a similar fashion, but reads are kicked in by the
device notifying in the interrupt endpoint that data is ready. Device
reset notifications are also sent via the notification endpoint.

We need a thread contexts to run USB autopm functions (blocking) and
to process the received data (can get to be heavy in processing
time).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 10:00:21 -08:00

269 lines
8.4 KiB
C

/*
* Intel Wireless WiMAX Connection 2400m over USB
* Notification handling
*
*
* Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* Intel Corporation <linux-wimax@intel.com>
* Yanir Lubetkin <yanirx.lubetkin@intel.com>
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
* - Initial implementation
*
*
* The notification endpoint is active when the device is not in boot
* mode; in here we just read and get notifications; based on those,
* we act to either reinitialize the device after a reboot or to
* submit a RX request.
*
* ROADMAP
*
* i2400mu_usb_notification_setup()
*
* i2400mu_usb_notification_release()
*
* i2400mu_usb_notification_cb() Called when a URB is ready
* i2400mu_notif_grok()
* i2400m_dev_reset_handle()
* i2400mu_rx_kick()
*/
#include <linux/usb.h>
#include "i2400m-usb.h"
#define D_SUBMODULE notif
#include "usb-debug-levels.h"
static const
__le32 i2400m_ZERO_BARKER[4] = { 0, 0, 0, 0 };
/*
* Process a received notification
*
* In normal operation mode, we can only receive two types of payloads
* on the notification endpoint:
*
* - a reboot barker, we do a bootstrap (the device has reseted).
*
* - a block of zeroes: there is pending data in the IN endpoint
*/
static
int i2400mu_notification_grok(struct i2400mu *i2400mu, const void *buf,
size_t buf_len)
{
int ret;
struct device *dev = &i2400mu->usb_iface->dev;
struct i2400m *i2400m = &i2400mu->i2400m;
d_fnstart(4, dev, "(i2400m %p buf %p buf_len %zu)\n",
i2400mu, buf, buf_len);
ret = -EIO;
if (buf_len < sizeof(i2400m_NBOOT_BARKER))
/* Not a bug, just ignore */
goto error_bad_size;
if (!memcmp(i2400m_NBOOT_BARKER, buf, sizeof(i2400m_NBOOT_BARKER))
|| !memcmp(i2400m_SBOOT_BARKER, buf, sizeof(i2400m_SBOOT_BARKER)))
ret = i2400m_dev_reset_handle(i2400m);
else if (!memcmp(i2400m_ZERO_BARKER, buf, sizeof(i2400m_ZERO_BARKER))) {
i2400mu_rx_kick(i2400mu);
ret = 0;
} else { /* Unknown or unexpected data in the notif message */
char prefix[64];
ret = -EIO;
dev_err(dev, "HW BUG? Unknown/unexpected data in notification "
"message (%zu bytes)\n", buf_len);
snprintf(prefix, sizeof(prefix), "%s %s: ",
dev_driver_string(dev) , dev->bus_id);
if (buf_len > 64) {
print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET,
8, 4, buf, 64, 0);
printk(KERN_ERR "%s... (only first 64 bytes "
"dumped)\n", prefix);
} else
print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET,
8, 4, buf, buf_len, 0);
}
error_bad_size:
d_fnend(4, dev, "(i2400m %p buf %p buf_len %zu) = %d\n",
i2400mu, buf, buf_len, ret);
return ret;
}
/*
* URB callback for the notification endpoint
*
* @urb: the urb received from the notification endpoint
*
* This function will just process the USB side of the transaction,
* checking everything is fine, pass the processing to
* i2400m_notification_grok() and resubmit the URB.
*/
static
void i2400mu_notification_cb(struct urb *urb)
{
int ret;
struct i2400mu *i2400mu = urb->context;
struct device *dev = &i2400mu->usb_iface->dev;
d_fnstart(4, dev, "(urb %p status %d actual_length %d)\n",
urb, urb->status, urb->actual_length);
ret = urb->status;
switch (ret) {
case 0:
ret = i2400mu_notification_grok(i2400mu, urb->transfer_buffer,
urb->actual_length);
if (ret == -EIO && edc_inc(&i2400mu->urb_edc, EDC_MAX_ERRORS,
EDC_ERROR_TIMEFRAME))
goto error_exceeded;
if (ret == -ENOMEM) /* uff...power cycle? shutdown? */
goto error_exceeded;
break;
case -EINVAL: /* while removing driver */
case -ENODEV: /* dev disconnect ... */
case -ENOENT: /* ditto */
case -ESHUTDOWN: /* URB killed */
case -ECONNRESET: /* disconnection */
goto out; /* Notify around */
default: /* Some error? */
if (edc_inc(&i2400mu->urb_edc,
EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME))
goto error_exceeded;
dev_err(dev, "notification: URB error %d, retrying\n",
urb->status);
}
usb_mark_last_busy(i2400mu->usb_dev);
ret = usb_submit_urb(i2400mu->notif_urb, GFP_ATOMIC);
switch (ret) {
case 0:
case -EINVAL: /* while removing driver */
case -ENODEV: /* dev disconnect ... */
case -ENOENT: /* ditto */
case -ESHUTDOWN: /* URB killed */
case -ECONNRESET: /* disconnection */
break; /* just ignore */
default: /* Some error? */
dev_err(dev, "notification: cannot submit URB: %d\n", ret);
goto error_submit;
}
d_fnend(4, dev, "(urb %p status %d actual_length %d) = void\n",
urb, urb->status, urb->actual_length);
return;
error_exceeded:
dev_err(dev, "maximum errors in notification URB exceeded; "
"resetting device\n");
error_submit:
usb_queue_reset_device(i2400mu->usb_iface);
out:
d_fnend(4, dev, "(urb %p status %d actual_length %d) = void\n",
urb, urb->status, urb->actual_length);
return;
}
/*
* setup the notification endpoint
*
* @i2400m: device descriptor
*
* This procedure prepares the notification urb and handler for receiving
* unsolicited barkers from the device.
*/
int i2400mu_notification_setup(struct i2400mu *i2400mu)
{
struct device *dev = &i2400mu->usb_iface->dev;
int usb_pipe, ret = 0;
struct usb_endpoint_descriptor *epd;
char *buf;
d_fnstart(4, dev, "(i2400m %p)\n", i2400mu);
buf = kmalloc(I2400MU_MAX_NOTIFICATION_LEN, GFP_KERNEL | GFP_DMA);
if (buf == NULL) {
dev_err(dev, "notification: buffer allocation failed\n");
ret = -ENOMEM;
goto error_buf_alloc;
}
i2400mu->notif_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!i2400mu->notif_urb) {
ret = -ENOMEM;
dev_err(dev, "notification: cannot allocate URB\n");
goto error_alloc_urb;
}
epd = usb_get_epd(i2400mu->usb_iface, I2400MU_EP_NOTIFICATION);
usb_pipe = usb_rcvintpipe(i2400mu->usb_dev, epd->bEndpointAddress);
usb_fill_int_urb(i2400mu->notif_urb, i2400mu->usb_dev, usb_pipe,
buf, I2400MU_MAX_NOTIFICATION_LEN,
i2400mu_notification_cb, i2400mu, epd->bInterval);
ret = usb_submit_urb(i2400mu->notif_urb, GFP_KERNEL);
if (ret != 0) {
dev_err(dev, "notification: cannot submit URB: %d\n", ret);
goto error_submit;
}
d_fnend(4, dev, "(i2400m %p) = %d\n", i2400mu, ret);
return ret;
error_submit:
usb_free_urb(i2400mu->notif_urb);
error_alloc_urb:
kfree(buf);
error_buf_alloc:
d_fnend(4, dev, "(i2400m %p) = %d\n", i2400mu, ret);
return ret;
}
/*
* Tear down of the notification mechanism
*
* @i2400m: device descriptor
*
* Kill the interrupt endpoint urb, free any allocated resources.
*
* We need to check if we have done it before as for example,
* _suspend() call this; if after a suspend() we get a _disconnect()
* (as the case is when hibernating), nothing bad happens.
*/
void i2400mu_notification_release(struct i2400mu *i2400mu)
{
struct device *dev = &i2400mu->usb_iface->dev;
d_fnstart(4, dev, "(i2400mu %p)\n", i2400mu);
if (i2400mu->notif_urb != NULL) {
usb_kill_urb(i2400mu->notif_urb);
kfree(i2400mu->notif_urb->transfer_buffer);
usb_free_urb(i2400mu->notif_urb);
i2400mu->notif_urb = NULL;
}
d_fnend(4, dev, "(i2400mu %p)\n", i2400mu);
}