linux/include/asm-arm26/system.h

262 lines
7.8 KiB
C

#ifndef __ASM_ARM_SYSTEM_H
#define __ASM_ARM_SYSTEM_H
#ifdef __KERNEL__
#include <linux/config.h>
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
* the compiler from one version to another so a bit of paranoia won't hurt.
* This string is meant to be concatenated with the inline asm string and
* will cause compilation to stop on mismatch. (From ARM32 - may come in handy)
*/
#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
#ifndef __ASSEMBLY__
#include <linux/linkage.h>
struct thread_info;
struct task_struct;
#if 0
/* information about the system we're running on */
extern unsigned int system_rev;
extern unsigned int system_serial_low;
extern unsigned int system_serial_high;
extern unsigned int mem_fclk_21285;
FIXME - sort this
/*
* We need to turn the caches off before calling the reset vector - RiscOS
* messes up if we don't
*/
#define proc_hard_reset() cpu_proc_fin()
#endif
struct pt_regs;
void die(const char *msg, struct pt_regs *regs, int err)
__attribute__((noreturn));
void die_if_kernel(const char *str, struct pt_regs *regs, int err);
void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
struct pt_regs *),
int sig, const char *name);
#include <asm/proc-fns.h>
#define xchg(ptr,x) \
((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
#define tas(ptr) (xchg((ptr),1))
extern asmlinkage void __backtrace(void);
#define set_cr(x) \
__asm__ __volatile__( \
"mcr p15, 0, %0, c1, c0, 0 @ set CR" \
: : "r" (x) : "cc")
#define get_cr() \
({ \
unsigned int __val; \
__asm__ __volatile__( \
"mrc p15, 0, %0, c1, c0, 0 @ get CR" \
: "=r" (__val) : : "cc"); \
__val; \
})
extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
extern unsigned long cr_alignment; /* defined in entry-armv.S */
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
#define UDBG_BADABORT (1 << 2)
#define UDBG_SEGV (1 << 3)
#define UDBG_BUS (1 << 4)
extern unsigned int user_debug;
#define vectors_base() (0)
#define mb() __asm__ __volatile__ ("" : : : "memory")
#define rmb() mb()
#define wmb() mb()
#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
#define read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; mb(); } while (0)
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
/*
* We assume knowledge of how
* spin_unlock_irq() and friends are implemented. This avoids
* us needlessly decrementing and incrementing the preempt count.
*/
#define prepare_arch_switch(next) local_irq_enable()
#define finish_arch_switch(prev) spin_unlock(&(rq)->lock)
/*
* switch_to(prev, next) should switch from task `prev' to `next'
* `prev' will never be the same as `next'. schedule() itself
* contains the memory barrier to tell GCC not to cache `current'.
*/
extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
#define switch_to(prev,next,last) \
do { \
last = __switch_to(prev,task_thread_info(prev),task_thread_info(next)); \
} while (0)
/*
* On SMP systems, when the scheduler does migration-cost autodetection,
* it needs a way to flush as much of the CPU's caches as possible.
*
* TODO: fill this in!
*/
static inline void sched_cacheflush(void)
{
}
/*
* Save the current interrupt enable state & disable IRQs
*/
#define local_irq_save(x) \
do { \
unsigned long temp; \
__asm__ __volatile__( \
" mov %0, pc @ save_flags_cli\n" \
" orr %1, %0, #0x08000000\n" \
" and %0, %0, #0x0c000000\n" \
" teqp %1, #0\n" \
: "=r" (x), "=r" (temp) \
: \
: "memory"); \
} while (0)
/*
* Enable IRQs (sti)
*/
#define local_irq_enable() \
do { \
unsigned long temp; \
__asm__ __volatile__( \
" mov %0, pc @ sti\n" \
" bic %0, %0, #0x08000000\n" \
" teqp %0, #0\n" \
: "=r" (temp) \
: \
: "memory"); \
} while(0)
/*
* Disable IRQs (cli)
*/
#define local_irq_disable() \
do { \
unsigned long temp; \
__asm__ __volatile__( \
" mov %0, pc @ cli\n" \
" orr %0, %0, #0x08000000\n" \
" teqp %0, #0\n" \
: "=r" (temp) \
: \
: "memory"); \
} while(0)
/* Enable FIQs (stf) */
#define __stf() do { \
unsigned long temp; \
__asm__ __volatile__( \
" mov %0, pc @ stf\n" \
" bic %0, %0, #0x04000000\n" \
" teqp %0, #0\n" \
: "=r" (temp)); \
} while(0)
/* Disable FIQs (clf) */
#define __clf() do { \
unsigned long temp; \
__asm__ __volatile__( \
" mov %0, pc @ clf\n" \
" orr %0, %0, #0x04000000\n" \
" teqp %0, #0\n" \
: "=r" (temp)); \
} while(0)
/*
* Save the current interrupt enable state.
*/
#define local_save_flags(x) \
do { \
__asm__ __volatile__( \
" mov %0, pc @ save_flags\n" \
" and %0, %0, #0x0c000000\n" \
: "=r" (x)); \
} while (0)
/*
* restore saved IRQ & FIQ state
*/
#define local_irq_restore(x) \
do { \
unsigned long temp; \
__asm__ __volatile__( \
" mov %0, pc @ restore_flags\n" \
" bic %0, %0, #0x0c000000\n" \
" orr %0, %0, %1\n" \
" teqp %0, #0\n" \
: "=&r" (temp) \
: "r" (x) \
: "memory"); \
} while (0)
#ifdef CONFIG_SMP
#error SMP not supported
#endif
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#define smp_read_barrier_depends() do { } while(0)
#define clf() __clf()
#define stf() __stf()
#define irqs_disabled() \
({ \
unsigned long flags; \
local_save_flags(flags); \
flags & PSR_I_BIT; \
})
static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
{
extern void __bad_xchg(volatile void *, int);
switch (size) {
case 1: return cpu_xchg_1(x, ptr);
case 4: return cpu_xchg_4(x, ptr);
default: __bad_xchg(ptr, size);
}
return 0;
}
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)
#endif /* __KERNEL__ */
#endif