linux/drivers/usb/host/ehci-msm.c
Matthieu CASTET 2cb30bb119 ehci-msm : use ehci_setup
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Tested-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-08 14:51:29 -07:00

247 lines
5.8 KiB
C

/* ehci-msm.c - HSUSB Host Controller Driver Implementation
*
* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
*
* Partly derived from ehci-fsl.c and ehci-hcd.c
* Copyright (c) 2000-2004 by David Brownell
* Copyright (c) 2005 MontaVista Software
*
* All source code in this file is licensed under the following license except
* where indicated.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, you can find it at http://www.fsf.org
*/
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/usb/otg.h>
#include <linux/usb/msm_hsusb_hw.h>
#define MSM_USB_BASE (hcd->regs)
static struct otg_transceiver *otg;
static int ehci_msm_reset(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
ehci->caps = USB_CAPLENGTH;
hcd->has_tt = 1;
retval = ehci_setup(hcd);
if (retval)
return retval;
/* bursts of unspecified length. */
writel(0, USB_AHBBURST);
/* Use the AHB transactor */
writel(0, USB_AHBMODE);
/* Disable streaming mode and select host mode */
writel(0x13, USB_USBMODE);
ehci_port_power(ehci, 1);
return 0;
}
static struct hc_driver msm_hc_driver = {
.description = hcd_name,
.product_desc = "Qualcomm On-Chip EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_USB2 | HCD_MEMORY,
.reset = ehci_msm_reset,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
/*
* PM support
*/
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
};
static int ehci_msm_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct resource *res;
int ret;
dev_dbg(&pdev->dev, "ehci_msm proble\n");
hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
return -ENOMEM;
}
hcd->irq = platform_get_irq(pdev, 0);
if (hcd->irq < 0) {
dev_err(&pdev->dev, "Unable to get IRQ resource\n");
ret = hcd->irq;
goto put_hcd;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Unable to get memory resource\n");
ret = -ENODEV;
goto put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -ENOMEM;
goto put_hcd;
}
/*
* OTG driver takes care of PHY initialization, clock management,
* powering up VBUS, mapping of registers address space and power
* management.
*/
otg = otg_get_transceiver();
if (!otg) {
dev_err(&pdev->dev, "unable to find transceiver\n");
ret = -ENODEV;
goto unmap;
}
ret = otg_set_host(otg, &hcd->self);
if (ret < 0) {
dev_err(&pdev->dev, "unable to register with transceiver\n");
goto put_transceiver;
}
device_init_wakeup(&pdev->dev, 1);
/*
* OTG device parent of HCD takes care of putting
* hardware into low power mode.
*/
pm_runtime_no_callbacks(&pdev->dev);
pm_runtime_enable(&pdev->dev);
return 0;
put_transceiver:
otg_put_transceiver(otg);
unmap:
iounmap(hcd->regs);
put_hcd:
usb_put_hcd(hcd);
return ret;
}
static int __devexit ehci_msm_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
otg_set_host(otg, NULL);
otg_put_transceiver(otg);
usb_put_hcd(hcd);
return 0;
}
#ifdef CONFIG_PM
static int ehci_msm_pm_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
bool wakeup = device_may_wakeup(dev);
dev_dbg(dev, "ehci-msm PM suspend\n");
/*
* EHCI helper function has also the same check before manipulating
* port wakeup flags. We do check here the same condition before
* calling the same helper function to avoid bringing hardware
* from Low power mode when there is no need for adjusting port
* wakeup flags.
*/
if (hcd->self.root_hub->do_remote_wakeup && !wakeup) {
pm_runtime_resume(dev);
ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
wakeup);
}
return 0;
}
static int ehci_msm_pm_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
dev_dbg(dev, "ehci-msm PM resume\n");
ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd));
return 0;
}
#else
#define ehci_msm_pm_suspend NULL
#define ehci_msm_pm_resume NULL
#endif
static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
.suspend = ehci_msm_pm_suspend,
.resume = ehci_msm_pm_resume,
};
static struct platform_driver ehci_msm_driver = {
.probe = ehci_msm_probe,
.remove = __devexit_p(ehci_msm_remove),
.driver = {
.name = "msm_hsusb_host",
.pm = &ehci_msm_dev_pm_ops,
},
};