linux/drivers/edac/Kconfig
Arthur Jones 8f421c595a edac: i5100 new intel chipset driver
Preliminary support for the Intel 5100 MCH.  CE and UE errors are reported
along with the current DIMM label information and other memory parameters.

Reasons why this is preliminary:

1) This chip has 2 independent memory controllers which, for best
   perforance, use interleaved accesses to the DDR2 memory.  This
   architecture does not map very well to the current edac data structures
   which depend on symmetric channel access to the interleaved data.
   Without core changes, the best I could do for now is to map both memory
   controllers to different csrows (first all ranks of controller 0, then
   all ranks of controller 1).  Someone much more familiar with the edac
   core than I will probably need to come up with a more general data
   structure to handle the interleaving and de-interleaving of the two
   memory controllers.

2) I have not yet tackled the de-interleaving of the rank/controller
   address space into the physical address space of the CPU.  There is
   nothing fundamentally missing, it is just ending up to be a lot of
   code, and I'd rather keep it separate for now, esp since it doesn't
   work yet...

3) The code depends on a particular i5100 chip select to DIMM mainboard
   chip select mapping.  This mapping seems obvious to me in order to
   support dual and single ranked memory, but it is not unique and DIMM
   labels could be wrong on other mainboards.  There is no way to query
   this mapping that I know of.

4) The code requires that the i5100 is in 32GB mode.  Only 4 ranks per
   controller, 2 ranks per DIMM are supported.  I do not have hardware
   (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks
   per controller) mode.

5) The serial presence detect code should be broken out into a "real"
   i2c driver so that decode-dimms.pl can work.

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:48 -07:00

163 lines
4.6 KiB
Text

#
# EDAC Kconfig
# Copyright (c) 2003 Linux Networx
# Licensed and distributed under the GPL
#
menuconfig EDAC
bool "EDAC - error detection and reporting (EXPERIMENTAL)"
depends on HAS_IOMEM
depends on EXPERIMENTAL
depends on X86 || PPC
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
supporting chipset or other subsystems:
memory errors, cache errors, PCI errors, thermal throttling, etc..
If unsure, select 'Y'.
If this code is reporting problems on your system, please
see the EDAC project web pages for more information at:
<http://bluesmoke.sourceforge.net/>
and:
<http://buttersideup.com/edacwiki>
There is also a mailing list for the EDAC project, which can
be found via the sourceforge page.
if EDAC
comment "Reporting subsystems"
config EDAC_DEBUG
bool "Debugging"
help
This turns on debugging information for the entire EDAC
sub-system. You can insert module with "debug_level=x", current
there're four debug levels (x=0,1,2,3 from low to high).
Usually you should select 'N'.
config EDAC_MM_EDAC
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
default y
help
Some systems are able to detect and correct errors in main
memory. EDAC can report statistics on memory error
detection and correction (EDAC - or commonly referred to ECC
errors). EDAC will also try to decode where these errors
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
config EDAC_AMD76X
tristate "AMD 76x (760, 762, 768)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the AMD 76x
series of chipsets used with the Athlon processor.
config EDAC_E7XXX
tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
E7205, E7500, E7501 and E7505 server chipsets.
config EDAC_E752X
tristate "Intel e752x (e7520, e7525, e7320) and 3100"
depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
help
Support for error detection and correction on the Intel
E7520, E7525, E7320 server chipsets.
config EDAC_I82443BXGX
tristate "Intel 82443BX/GX (440BX/GX)"
depends on EDAC_MM_EDAC && PCI && X86_32
depends on BROKEN
help
Support for error detection and correction on the Intel
82443BX/GX memory controllers (440BX/GX chipsets).
config EDAC_I82875P
tristate "Intel 82875p (D82875P, E7210)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
DP82785P and E7210 server chipsets.
config EDAC_I82975X
tristate "Intel 82975x (D82975x)"
depends on EDAC_MM_EDAC && PCI && X86
help
Support for error detection and correction on the Intel
DP82975x server chipsets.
config EDAC_I3000
tristate "Intel 3000/3010"
depends on EDAC_MM_EDAC && PCI && X86
help
Support for error detection and correction on the Intel
3000 and 3010 server chipsets.
config EDAC_I82860
tristate "Intel 82860"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
82860 chipset.
config EDAC_R82600
tristate "Radisys 82600 embedded chipset"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Radisys
82600 embedded chipset.
config EDAC_I5000
tristate "Intel Greencreek/Blackford chipset"
depends on EDAC_MM_EDAC && X86 && PCI
help
Support for error detection and correction the Intel
Greekcreek/Blackford chipsets.
config EDAC_I5100
tristate "Intel San Clemente MCH"
depends on EDAC_MM_EDAC && X86 && PCI
help
Support for error detection and correction the Intel
San Clemente MCH.
config EDAC_MPC85XX
tristate "Freescale MPC85xx"
depends on EDAC_MM_EDAC && FSL_SOC && MPC85xx
help
Support for error detection and correction on the Freescale
MPC8560, MPC8540, MPC8548
config EDAC_MV64X60
tristate "Marvell MV64x60"
depends on EDAC_MM_EDAC && MV64X60
help
Support for error detection and correction on the Marvell
MV64360 and MV64460 chipsets.
config EDAC_PASEMI
tristate "PA Semi PWRficient"
depends on EDAC_MM_EDAC && PCI
depends on PPC_PASEMI
help
Support for error detection and correction on PA Semi
PWRficient.
config EDAC_CELL
tristate "Cell Broadband Engine memory controller"
depends on EDAC_MM_EDAC && PPC_CELL_NATIVE
help
Support for error detection and correction on the
Cell Broadband Engine internal memory controller
on platform without a hypervisor
endif # EDAC