linux/drivers/pci
Rafael J. Wysocki bc9b6407bd ACPI / PM: Rework the handling of devices depending on power resources
Commit 0090def6 (ACPI: Add interface to register/unregister device
to/from power resources) made it possible to indicate to the ACPI
core that if the given device depends on any power resources, then
it should be resumed as soon as all of the power resources required
by it to transition to the D0 power state have been turned on.

Unfortunately, however, this was a mistake, because all devices
depending on power resources should be treated this way (i.e. they
should be resumed when all power resources required by their D0
state have been turned on) and for the majority of those devices
the ACPI core can figure out by itself which (physical) devices
depend on what power resources.

For this reason, replace the code added by commit 0090def6 with a
new, much more straightforward, mechanism that will be used
internally by the ACPI core and remove all references to that code
from kernel subsystems using ACPI.

For the cases when there are (physical) devices that should be
resumed whenever a not directly related ACPI device node goes into
D0 as a result of power resources configuration changes, like in
the SATA case, add two new routines, acpi_dev_pm_add_dependent()
and acpi_dev_pm_remove_dependent(), allowing subsystems to manage
such dependencies.  Convert the SATA subsystem to use the new
functions accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:05 +01:00
..
hotplug ACPI / scan: Drop the second argument of acpi_bus_trim() 2013-01-15 13:23:53 +01:00
pcie PCI/PM: Do not suspend port if any subordinate device needs PME polling 2012-12-26 10:39:23 -07:00
access.c PCI: Add accessors for PCI Express Capability 2012-08-23 09:41:20 -06:00
ats.c Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci 2012-01-11 18:50:26 -08:00
bus.c Merge branch 'pci/mjg-pci-roms-from-efi' into next 2012-12-06 14:37:32 -07:00
host-bridge.c PCI: add host bridge release support 2012-04-30 14:52:43 -06:00
hotplug-pci.c PCI: hotplug: remove pci_do_scan_bus() 2012-06-13 15:42:27 -06:00
htirq.c pci: Fix files needing export.h for EXPORT_SYMBOL/THIS_MODULE 2011-10-31 19:31:22 -04:00
ioapic.c PCI changes for the v3.8 merge window: 2012-12-13 12:14:47 -08:00
iov.c PCI: Remove useless "!dev" tests 2012-11-09 21:40:09 -07:00
irq.c PCI: Convert dev_printk(KERN_<LEVEL> to dev_<level>( 2012-11-07 15:24:18 -07:00
Kconfig PCI: Drop bogus default from ARCH_SUPPORTS_MSI 2012-09-10 16:49:52 -06:00
Makefile PCI: Always build setup-bus when PCI is enabled 2012-11-28 13:00:58 -08:00
msi.c s390/pci: PCI adapter interrupts for MSI/MSI-X 2012-11-30 17:47:21 +01:00
msi.h PCI: MSI: Move MSI-X entry definition to pci_regs.h 2010-12-23 12:53:07 -08:00
of.c PCI: OF: Don't crash when bridge parent is NULL. 2011-08-19 08:51:37 -07:00
pci-acpi.c ACPI / PM: Rework the handling of devices depending on power resources 2013-01-17 14:11:05 +01:00
pci-driver.c PCI changes for the v3.8 merge window: 2012-12-13 12:14:47 -08:00
pci-label.c switch ->is_visible() to returning umode_t 2012-01-03 22:54:55 -05:00
pci-stub.c PCI: Convert dev_printk(KERN_<LEVEL> to dev_<level>( 2012-11-07 15:24:18 -07:00
pci-sysfs.c PCI: Remove spurious error for sriov_numvfs store and simplify flow 2012-12-26 10:39:22 -07:00
pci.c ACPI / PCI: Rework the setup and cleanup of device wakeup 2013-01-03 13:09:41 +01:00
pci.h ACPI / PCI: Rework the setup and cleanup of device wakeup 2013-01-03 13:09:41 +01:00
probe.c ACPI / PCI: Rework the setup and cleanup of device wakeup 2013-01-03 13:09:41 +01:00
proc.c PCI/PM: Fix proc config reg access for D3cold and bridge suspending 2012-11-05 10:46:23 -07:00
quirks.c PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz 2012-12-26 10:43:06 -07:00
remove.c PCI: Add pci_stop_and_remove_root_bus() 2012-11-03 16:26:37 -06:00
rom.c PCI: Use phys_addr_t for physical ROM address 2012-12-10 11:24:42 -07:00
search.c Merge branch 'pci/feng-avoid-kmalloc' into next 2012-09-10 16:31:08 -06:00
setup-bus.c PCI: Move out pci_enable_bridges out of assign_unsigned_bus_res 2012-11-03 16:20:30 -06:00
setup-irq.c PCI: Provide a default pcibios_update_irq() 2012-09-18 17:28:21 -06:00
setup-res.c Merge branch 'pci/nikhil-big-bar-fixes' into next 2012-07-18 14:06:20 -06:00
slot.c pci: add module.h to files implicitly relying on its presence. 2011-10-31 19:31:23 -04:00
syscall.c
vpd.c pci: Fix files needing export.h for EXPORT_SYMBOL/THIS_MODULE 2011-10-31 19:31:22 -04:00
xen-pcifront.c PCI changes for the v3.8 merge window: 2012-12-13 12:14:47 -08:00