linux/arch/powerpc/sysdev/mv64x60_pci.c
Sebastian Andrzej Siewior 492bf4f25a powerpc/PCI: move fixup hooks from __init to __devinit
The fixups are executed once the pci-device is found which is during
boot process so __init seems fine as long as the platform does not
support hotplug.

However it is possible to remove the PCI bus at run time and have it
rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call
the fixups again.

Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-16 12:44:30 -06:00

171 lines
4.2 KiB
C

/*
* PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery)
*
* Author: Dale Farnsworth <dale@farnsworth.org>
*
* 2007 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/stat.h>
#include <linux/pci.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */
#ifdef CONFIG_SYSFS
/* 32-bit hex or dec stringified number + '\n' */
#define MV64X60_VAL_LEN_MAX 11
#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
static ssize_t mv64x60_hs_reg_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count)
{
struct pci_dev *phb;
u32 v;
if (off > 0)
return 0;
if (count < MV64X60_VAL_LEN_MAX)
return -EINVAL;
phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!phb)
return -ENODEV;
pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
pci_dev_put(phb);
return sprintf(buf, "0x%08x\n", v);
}
static ssize_t mv64x60_hs_reg_write(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count)
{
struct pci_dev *phb;
u32 v;
if (off > 0)
return 0;
if (count <= 0)
return -EINVAL;
if (sscanf(buf, "%i", &v) != 1)
return -EINVAL;
phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!phb)
return -ENODEV;
pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
pci_dev_put(phb);
return count;
}
static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */
.attr = {
.name = "hs_reg",
.mode = S_IRUGO | S_IWUSR,
},
.size = MV64X60_VAL_LEN_MAX,
.read = mv64x60_hs_reg_read,
.write = mv64x60_hs_reg_write,
};
static int __init mv64x60_sysfs_init(void)
{
struct device_node *np;
struct platform_device *pdev;
const unsigned int *prop;
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr);
}
subsys_initcall(mv64x60_sysfs_init);
#endif /* CONFIG_SYSFS */
static void __devinit mv64x60_pci_fixup_early(struct pci_dev *dev)
{
/*
* Set the host bridge hdr_type to an invalid value so that
* pci_setup_device() will ignore the host bridge.
*/
dev->hdr_type = PCI_HEADER_TYPE_INVALID;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360,
mv64x60_pci_fixup_early);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460,
mv64x60_pci_fixup_early);
static int __init mv64x60_add_bridge(struct device_node *dev)
{
int len;
struct pci_controller *hose;
struct resource rsrc;
const int *bus_range;
int primary;
memset(&rsrc, 0, sizeof(rsrc));
/* Fetch host bridge registers address */
if (of_address_to_resource(dev, 0, &rsrc)) {
printk(KERN_ERR "No PCI reg property in device tree\n");
return -ENODEV;
}
/* Get bus range if any */
bus_range = of_get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int))
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0);
hose->self_busno = hose->first_busno;
printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
(unsigned long long)rsrc.start, hose->first_busno,
hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
primary = (hose->first_busno == 0);
pci_process_bridge_OF_ranges(hose, dev, primary);
return 0;
}
void __init mv64x60_pci_init(void)
{
struct device_node *np;
for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
mv64x60_add_bridge(np);
}