linux/drivers/usb
Matthew Dharm 77f46328fb [PATCH] USB Storage: close a race condition in disconnect near probe
This patch started life as as533, and has been re-diffed against the
current tree.

Disconnect processing in usb-storage naturally divides into two parts:
one to quiesce the driver (make sure no commands are executing or
queued) and remove the host, and the other to deallocate all the USB and
non-USB resources.  This patch creates two subroutines to handle those
two parts.  Mostly it's just code movement, but there is one significant
change.  If the scsi-scanning thread fails to initialize but the host
has successfully been added, we need to quiesce the driver before
removing the host.  After all, it's possible that scanning could have
been initiated from somewhere else, such as userspace -- very low
probability, but it's easily handled by calling the new subroutine.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 16:22:54 -07:00
..
atm [PATCH] USB: convert kcalloc to kzalloc 2005-09-07 16:57:46 -07:00
class [PATCH] USB usblp: rate-limit printer status error messages 2005-09-08 16:22:40 -07:00
core [PATCH] USB: Fix regression in core/devio.c 2005-09-08 16:22:30 -07:00
gadget [PATCH] USB: Gadget library: centralize gadget controller numbers 2005-09-08 16:22:16 -07:00
host [PATCH] USB: Switch isp116x-hcd over to root hub interrupt 2005-09-08 16:22:48 -07:00
image [PATCH] clean up inline static vs static inline 2005-07-27 16:26:20 -07:00
input [PATCH] USB: Prevent hid-core claiming Apple Bluetooth device on new G4 powerbooks 2005-09-08 16:22:29 -07:00
media [PATCH] I2C: Drop I2C_DEVNAME and i2c_clientname 2005-09-05 09:14:35 -07:00
misc [PATCH] swsusp: switch pm_message_t to struct 2005-09-05 00:06:16 -07:00
mon [PATCH] USB: usbmon: Copyrights and a typo 2005-08-16 21:06:25 -07:00
net [PATCH] USB: usbnet and unsigned gfp_flags 2005-09-08 16:22:41 -07:00
serial [PATCH] USB ftdi_sio: New IDs for ELV, Xsens and Falcom products 2005-09-08 16:22:29 -07:00
storage [PATCH] USB Storage: close a race condition in disconnect near probe 2005-09-08 16:22:54 -07:00
Kconfig [PATCH] USB: add S3C24XX USB Host driver support 2005-07-29 13:12:53 -07:00
Makefile [PATCH] USB: add ldusb driver 2005-07-12 11:52:57 -07:00
README
usb-skeleton.c [PATCH] USB: fix Bug in usb-skeleton.c 2005-07-29 13:12:54 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.