9ffc93f203
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
748 lines
17 KiB
C
748 lines
17 KiB
C
/*
|
|
* AMD K7 Powernow driver.
|
|
* (C) 2003 Dave Jones on behalf of SuSE Labs.
|
|
* (C) 2003-2004 Dave Jones <davej@redhat.com>
|
|
*
|
|
* Licensed under the terms of the GNU GPL License version 2.
|
|
* Based upon datasheets & sample CPUs kindly provided by AMD.
|
|
*
|
|
* Errata 5:
|
|
* CPU may fail to execute a FID/VID change in presence of interrupt.
|
|
* - We cli/sti on stepping A0 CPUs around the FID/VID transition.
|
|
* Errata 15:
|
|
* CPU with half frequency multipliers may hang upon wakeup from disconnect.
|
|
* - We disable half multipliers if ACPI is used on A0 stepping CPUs.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */
|
|
#include <asm/msr.h>
|
|
#include <asm/cpu_device_id.h>
|
|
|
|
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
|
|
#include <linux/acpi.h>
|
|
#include <acpi/processor.h>
|
|
#endif
|
|
|
|
#include "powernow-k7.h"
|
|
|
|
#define PFX "powernow: "
|
|
|
|
|
|
struct psb_s {
|
|
u8 signature[10];
|
|
u8 tableversion;
|
|
u8 flags;
|
|
u16 settlingtime;
|
|
u8 reserved1;
|
|
u8 numpst;
|
|
};
|
|
|
|
struct pst_s {
|
|
u32 cpuid;
|
|
u8 fsbspeed;
|
|
u8 maxfid;
|
|
u8 startvid;
|
|
u8 numpstates;
|
|
};
|
|
|
|
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
|
|
union powernow_acpi_control_t {
|
|
struct {
|
|
unsigned long fid:5,
|
|
vid:5,
|
|
sgtc:20,
|
|
res1:2;
|
|
} bits;
|
|
unsigned long val;
|
|
};
|
|
#endif
|
|
|
|
/* divide by 1000 to get VCore voltage in V. */
|
|
static const int mobile_vid_table[32] = {
|
|
2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
|
|
1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
|
|
1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
|
|
1075, 1050, 1025, 1000, 975, 950, 925, 0,
|
|
};
|
|
|
|
/* divide by 10 to get FID. */
|
|
static const int fid_codes[32] = {
|
|
110, 115, 120, 125, 50, 55, 60, 65,
|
|
70, 75, 80, 85, 90, 95, 100, 105,
|
|
30, 190, 40, 200, 130, 135, 140, 210,
|
|
150, 225, 160, 165, 170, 180, -1, -1,
|
|
};
|
|
|
|
/* This parameter is used in order to force ACPI instead of legacy method for
|
|
* configuration purpose.
|
|
*/
|
|
|
|
static int acpi_force;
|
|
|
|
static struct cpufreq_frequency_table *powernow_table;
|
|
|
|
static unsigned int can_scale_bus;
|
|
static unsigned int can_scale_vid;
|
|
static unsigned int minimum_speed = -1;
|
|
static unsigned int maximum_speed;
|
|
static unsigned int number_scales;
|
|
static unsigned int fsb;
|
|
static unsigned int latency;
|
|
static char have_a0;
|
|
|
|
static int check_fsb(unsigned int fsbspeed)
|
|
{
|
|
int delta;
|
|
unsigned int f = fsb / 1000;
|
|
|
|
delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
|
|
return delta < 5;
|
|
}
|
|
|
|
static const struct x86_cpu_id powernow_k7_cpuids[] = {
|
|
{ X86_VENDOR_AMD, 6, },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids);
|
|
|
|
static int check_powernow(void)
|
|
{
|
|
struct cpuinfo_x86 *c = &cpu_data(0);
|
|
unsigned int maxei, eax, ebx, ecx, edx;
|
|
|
|
if (!x86_match_cpu(powernow_k7_cpuids))
|
|
return 0;
|
|
|
|
/* Get maximum capabilities */
|
|
maxei = cpuid_eax(0x80000000);
|
|
if (maxei < 0x80000007) { /* Any powernow info ? */
|
|
#ifdef MODULE
|
|
printk(KERN_INFO PFX "No powernow capabilities detected\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
if ((c->x86_model == 6) && (c->x86_mask == 0)) {
|
|
printk(KERN_INFO PFX "K7 660[A0] core detected, "
|
|
"enabling errata workarounds\n");
|
|
have_a0 = 1;
|
|
}
|
|
|
|
cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
|
|
|
|
/* Check we can actually do something before we say anything.*/
|
|
if (!(edx & (1 << 1 | 1 << 2)))
|
|
return 0;
|
|
|
|
printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
|
|
|
|
if (edx & 1 << 1) {
|
|
printk("frequency");
|
|
can_scale_bus = 1;
|
|
}
|
|
|
|
if ((edx & (1 << 1 | 1 << 2)) == 0x6)
|
|
printk(" and ");
|
|
|
|
if (edx & 1 << 2) {
|
|
printk("voltage");
|
|
can_scale_vid = 1;
|
|
}
|
|
|
|
printk(".\n");
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
|
|
static void invalidate_entry(unsigned int entry)
|
|
{
|
|
powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
|
|
}
|
|
#endif
|
|
|
|
static int get_ranges(unsigned char *pst)
|
|
{
|
|
unsigned int j;
|
|
unsigned int speed;
|
|
u8 fid, vid;
|
|
|
|
powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
|
|
(number_scales + 1)), GFP_KERNEL);
|
|
if (!powernow_table)
|
|
return -ENOMEM;
|
|
|
|
for (j = 0 ; j < number_scales; j++) {
|
|
fid = *pst++;
|
|
|
|
powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
|
|
powernow_table[j].index = fid; /* lower 8 bits */
|
|
|
|
speed = powernow_table[j].frequency;
|
|
|
|
if ((fid_codes[fid] % 10) == 5) {
|
|
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
|
|
if (have_a0 == 1)
|
|
invalidate_entry(j);
|
|
#endif
|
|
}
|
|
|
|
if (speed < minimum_speed)
|
|
minimum_speed = speed;
|
|
if (speed > maximum_speed)
|
|
maximum_speed = speed;
|
|
|
|
vid = *pst++;
|
|
powernow_table[j].index |= (vid << 8); /* upper 8 bits */
|
|
|
|
pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) "
|
|
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
|
|
fid_codes[fid] % 10, speed/1000, vid,
|
|
mobile_vid_table[vid]/1000,
|
|
mobile_vid_table[vid]%1000);
|
|
}
|
|
powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
|
|
powernow_table[number_scales].index = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void change_FID(int fid)
|
|
{
|
|
union msr_fidvidctl fidvidctl;
|
|
|
|
rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
|
|
if (fidvidctl.bits.FID != fid) {
|
|
fidvidctl.bits.SGTC = latency;
|
|
fidvidctl.bits.FID = fid;
|
|
fidvidctl.bits.VIDC = 0;
|
|
fidvidctl.bits.FIDC = 1;
|
|
wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
|
|
}
|
|
}
|
|
|
|
|
|
static void change_VID(int vid)
|
|
{
|
|
union msr_fidvidctl fidvidctl;
|
|
|
|
rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
|
|
if (fidvidctl.bits.VID != vid) {
|
|
fidvidctl.bits.SGTC = latency;
|
|
fidvidctl.bits.VID = vid;
|
|
fidvidctl.bits.FIDC = 0;
|
|
fidvidctl.bits.VIDC = 1;
|
|
wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
|
|
}
|
|
}
|
|
|
|
|
|
static void change_speed(unsigned int index)
|
|
{
|
|
u8 fid, vid;
|
|
struct cpufreq_freqs freqs;
|
|
union msr_fidvidstatus fidvidstatus;
|
|
int cfid;
|
|
|
|
/* fid are the lower 8 bits of the index we stored into
|
|
* the cpufreq frequency table in powernow_decode_bios,
|
|
* vid are the upper 8 bits.
|
|
*/
|
|
|
|
fid = powernow_table[index].index & 0xFF;
|
|
vid = (powernow_table[index].index & 0xFF00) >> 8;
|
|
|
|
freqs.cpu = 0;
|
|
|
|
rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
|
|
cfid = fidvidstatus.bits.CFID;
|
|
freqs.old = fsb * fid_codes[cfid] / 10;
|
|
|
|
freqs.new = powernow_table[index].frequency;
|
|
|
|
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
|
|
|
/* Now do the magic poking into the MSRs. */
|
|
|
|
if (have_a0 == 1) /* A0 errata 5 */
|
|
local_irq_disable();
|
|
|
|
if (freqs.old > freqs.new) {
|
|
/* Going down, so change FID first */
|
|
change_FID(fid);
|
|
change_VID(vid);
|
|
} else {
|
|
/* Going up, so change VID first */
|
|
change_VID(vid);
|
|
change_FID(fid);
|
|
}
|
|
|
|
|
|
if (have_a0 == 1)
|
|
local_irq_enable();
|
|
|
|
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
|
|
|
|
static struct acpi_processor_performance *acpi_processor_perf;
|
|
|
|
static int powernow_acpi_init(void)
|
|
{
|
|
int i;
|
|
int retval = 0;
|
|
union powernow_acpi_control_t pc;
|
|
|
|
if (acpi_processor_perf != NULL && powernow_table != NULL) {
|
|
retval = -EINVAL;
|
|
goto err0;
|
|
}
|
|
|
|
acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance),
|
|
GFP_KERNEL);
|
|
if (!acpi_processor_perf) {
|
|
retval = -ENOMEM;
|
|
goto err0;
|
|
}
|
|
|
|
if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
|
|
GFP_KERNEL)) {
|
|
retval = -ENOMEM;
|
|
goto err05;
|
|
}
|
|
|
|
if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
|
|
retval = -EIO;
|
|
goto err1;
|
|
}
|
|
|
|
if (acpi_processor_perf->control_register.space_id !=
|
|
ACPI_ADR_SPACE_FIXED_HARDWARE) {
|
|
retval = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
if (acpi_processor_perf->status_register.space_id !=
|
|
ACPI_ADR_SPACE_FIXED_HARDWARE) {
|
|
retval = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
number_scales = acpi_processor_perf->state_count;
|
|
|
|
if (number_scales < 2) {
|
|
retval = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
|
|
(number_scales + 1)), GFP_KERNEL);
|
|
if (!powernow_table) {
|
|
retval = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
pc.val = (unsigned long) acpi_processor_perf->states[0].control;
|
|
for (i = 0; i < number_scales; i++) {
|
|
u8 fid, vid;
|
|
struct acpi_processor_px *state =
|
|
&acpi_processor_perf->states[i];
|
|
unsigned int speed, speed_mhz;
|
|
|
|
pc.val = (unsigned long) state->control;
|
|
pr_debug("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
|
|
i,
|
|
(u32) state->core_frequency,
|
|
(u32) state->power,
|
|
(u32) state->transition_latency,
|
|
(u32) state->control,
|
|
pc.bits.sgtc);
|
|
|
|
vid = pc.bits.vid;
|
|
fid = pc.bits.fid;
|
|
|
|
powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
|
|
powernow_table[i].index = fid; /* lower 8 bits */
|
|
powernow_table[i].index |= (vid << 8); /* upper 8 bits */
|
|
|
|
speed = powernow_table[i].frequency;
|
|
speed_mhz = speed / 1000;
|
|
|
|
/* processor_perflib will multiply the MHz value by 1000 to
|
|
* get a KHz value (e.g. 1266000). However, powernow-k7 works
|
|
* with true KHz values (e.g. 1266768). To ensure that all
|
|
* powernow frequencies are available, we must ensure that
|
|
* ACPI doesn't restrict them, so we round up the MHz value
|
|
* to ensure that perflib's computed KHz value is greater than
|
|
* or equal to powernow's KHz value.
|
|
*/
|
|
if (speed % 1000 > 0)
|
|
speed_mhz++;
|
|
|
|
if ((fid_codes[fid] % 10) == 5) {
|
|
if (have_a0 == 1)
|
|
invalidate_entry(i);
|
|
}
|
|
|
|
pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) "
|
|
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
|
|
fid_codes[fid] % 10, speed_mhz, vid,
|
|
mobile_vid_table[vid]/1000,
|
|
mobile_vid_table[vid]%1000);
|
|
|
|
if (state->core_frequency != speed_mhz) {
|
|
state->core_frequency = speed_mhz;
|
|
pr_debug(" Corrected ACPI frequency to %d\n",
|
|
speed_mhz);
|
|
}
|
|
|
|
if (latency < pc.bits.sgtc)
|
|
latency = pc.bits.sgtc;
|
|
|
|
if (speed < minimum_speed)
|
|
minimum_speed = speed;
|
|
if (speed > maximum_speed)
|
|
maximum_speed = speed;
|
|
}
|
|
|
|
powernow_table[i].frequency = CPUFREQ_TABLE_END;
|
|
powernow_table[i].index = 0;
|
|
|
|
/* notify BIOS that we exist */
|
|
acpi_processor_notify_smm(THIS_MODULE);
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
acpi_processor_unregister_performance(acpi_processor_perf, 0);
|
|
err1:
|
|
free_cpumask_var(acpi_processor_perf->shared_cpu_map);
|
|
err05:
|
|
kfree(acpi_processor_perf);
|
|
err0:
|
|
printk(KERN_WARNING PFX "ACPI perflib can not be used on "
|
|
"this platform\n");
|
|
acpi_processor_perf = NULL;
|
|
return retval;
|
|
}
|
|
#else
|
|
static int powernow_acpi_init(void)
|
|
{
|
|
printk(KERN_INFO PFX "no support for ACPI processor found."
|
|
" Please recompile your kernel with ACPI processor\n");
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
|
|
static void print_pst_entry(struct pst_s *pst, unsigned int j)
|
|
{
|
|
pr_debug("PST:%d (@%p)\n", j, pst);
|
|
pr_debug(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
|
|
pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
|
|
}
|
|
|
|
static int powernow_decode_bios(int maxfid, int startvid)
|
|
{
|
|
struct psb_s *psb;
|
|
struct pst_s *pst;
|
|
unsigned int i, j;
|
|
unsigned char *p;
|
|
unsigned int etuple;
|
|
unsigned int ret;
|
|
|
|
etuple = cpuid_eax(0x80000001);
|
|
|
|
for (i = 0xC0000; i < 0xffff0 ; i += 16) {
|
|
|
|
p = phys_to_virt(i);
|
|
|
|
if (memcmp(p, "AMDK7PNOW!", 10) == 0) {
|
|
pr_debug("Found PSB header at %p\n", p);
|
|
psb = (struct psb_s *) p;
|
|
pr_debug("Table version: 0x%x\n", psb->tableversion);
|
|
if (psb->tableversion != 0x12) {
|
|
printk(KERN_INFO PFX "Sorry, only v1.2 tables"
|
|
" supported right now\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pr_debug("Flags: 0x%x\n", psb->flags);
|
|
if ((psb->flags & 1) == 0)
|
|
pr_debug("Mobile voltage regulator\n");
|
|
else
|
|
pr_debug("Desktop voltage regulator\n");
|
|
|
|
latency = psb->settlingtime;
|
|
if (latency < 100) {
|
|
printk(KERN_INFO PFX "BIOS set settling time "
|
|
"to %d microseconds. "
|
|
"Should be at least 100. "
|
|
"Correcting.\n", latency);
|
|
latency = 100;
|
|
}
|
|
pr_debug("Settling Time: %d microseconds.\n",
|
|
psb->settlingtime);
|
|
pr_debug("Has %d PST tables. (Only dumping ones "
|
|
"relevant to this CPU).\n",
|
|
psb->numpst);
|
|
|
|
p += sizeof(struct psb_s);
|
|
|
|
pst = (struct pst_s *) p;
|
|
|
|
for (j = 0; j < psb->numpst; j++) {
|
|
pst = (struct pst_s *) p;
|
|
number_scales = pst->numpstates;
|
|
|
|
if ((etuple == pst->cpuid) &&
|
|
check_fsb(pst->fsbspeed) &&
|
|
(maxfid == pst->maxfid) &&
|
|
(startvid == pst->startvid)) {
|
|
print_pst_entry(pst, j);
|
|
p = (char *)pst + sizeof(struct pst_s);
|
|
ret = get_ranges(p);
|
|
return ret;
|
|
} else {
|
|
unsigned int k;
|
|
p = (char *)pst + sizeof(struct pst_s);
|
|
for (k = 0; k < number_scales; k++)
|
|
p += 2;
|
|
}
|
|
}
|
|
printk(KERN_INFO PFX "No PST tables match this cpuid "
|
|
"(0x%x)\n", etuple);
|
|
printk(KERN_INFO PFX "This is indicative of a broken "
|
|
"BIOS.\n");
|
|
|
|
return -EINVAL;
|
|
}
|
|
p++;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
|
|
static int powernow_target(struct cpufreq_policy *policy,
|
|
unsigned int target_freq,
|
|
unsigned int relation)
|
|
{
|
|
unsigned int newstate;
|
|
|
|
if (cpufreq_frequency_table_target(policy, powernow_table, target_freq,
|
|
relation, &newstate))
|
|
return -EINVAL;
|
|
|
|
change_speed(newstate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int powernow_verify(struct cpufreq_policy *policy)
|
|
{
|
|
return cpufreq_frequency_table_verify(policy, powernow_table);
|
|
}
|
|
|
|
/*
|
|
* We use the fact that the bus frequency is somehow
|
|
* a multiple of 100000/3 khz, then we compute sgtc according
|
|
* to this multiple.
|
|
* That way, we match more how AMD thinks all of that work.
|
|
* We will then get the same kind of behaviour already tested under
|
|
* the "well-known" other OS.
|
|
*/
|
|
static int __cpuinit fixup_sgtc(void)
|
|
{
|
|
unsigned int sgtc;
|
|
unsigned int m;
|
|
|
|
m = fsb / 3333;
|
|
if ((m % 10) >= 5)
|
|
m += 5;
|
|
|
|
m /= 10;
|
|
|
|
sgtc = 100 * m * latency;
|
|
sgtc = sgtc / 3;
|
|
if (sgtc > 0xfffff) {
|
|
printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
|
|
sgtc = 0xfffff;
|
|
}
|
|
return sgtc;
|
|
}
|
|
|
|
static unsigned int powernow_get(unsigned int cpu)
|
|
{
|
|
union msr_fidvidstatus fidvidstatus;
|
|
unsigned int cfid;
|
|
|
|
if (cpu)
|
|
return 0;
|
|
rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
|
|
cfid = fidvidstatus.bits.CFID;
|
|
|
|
return fsb * fid_codes[cfid] / 10;
|
|
}
|
|
|
|
|
|
static int __cpuinit acer_cpufreq_pst(const struct dmi_system_id *d)
|
|
{
|
|
printk(KERN_WARNING PFX
|
|
"%s laptop with broken PST tables in BIOS detected.\n",
|
|
d->ident);
|
|
printk(KERN_WARNING PFX
|
|
"You need to downgrade to 3A21 (09/09/2002), or try a newer "
|
|
"BIOS than 3A71 (01/20/2003)\n");
|
|
printk(KERN_WARNING PFX
|
|
"cpufreq scaling has been disabled as a result of this.\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Some Athlon laptops have really fucked PST tables.
|
|
* A BIOS update is all that can save them.
|
|
* Mention this, and disable cpufreq.
|
|
*/
|
|
static struct dmi_system_id __cpuinitdata powernow_dmi_table[] = {
|
|
{
|
|
.callback = acer_cpufreq_pst,
|
|
.ident = "Acer Aspire",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
|
|
DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
|
|
},
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static int __cpuinit powernow_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
union msr_fidvidstatus fidvidstatus;
|
|
int result;
|
|
|
|
if (policy->cpu != 0)
|
|
return -ENODEV;
|
|
|
|
rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
|
|
|
|
recalibrate_cpu_khz();
|
|
|
|
fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
|
|
if (!fsb) {
|
|
printk(KERN_WARNING PFX "can not determine bus frequency\n");
|
|
return -EINVAL;
|
|
}
|
|
pr_debug("FSB: %3dMHz\n", fsb/1000);
|
|
|
|
if (dmi_check_system(powernow_dmi_table) || acpi_force) {
|
|
printk(KERN_INFO PFX "PSB/PST known to be broken. "
|
|
"Trying ACPI instead\n");
|
|
result = powernow_acpi_init();
|
|
} else {
|
|
result = powernow_decode_bios(fidvidstatus.bits.MFID,
|
|
fidvidstatus.bits.SVID);
|
|
if (result) {
|
|
printk(KERN_INFO PFX "Trying ACPI perflib\n");
|
|
maximum_speed = 0;
|
|
minimum_speed = -1;
|
|
latency = 0;
|
|
result = powernow_acpi_init();
|
|
if (result) {
|
|
printk(KERN_INFO PFX
|
|
"ACPI and legacy methods failed\n");
|
|
}
|
|
} else {
|
|
/* SGTC use the bus clock as timer */
|
|
latency = fixup_sgtc();
|
|
printk(KERN_INFO PFX "SGTC: %d\n", latency);
|
|
}
|
|
}
|
|
|
|
if (result)
|
|
return result;
|
|
|
|
printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
|
|
minimum_speed/1000, maximum_speed/1000);
|
|
|
|
policy->cpuinfo.transition_latency =
|
|
cpufreq_scale(2000000UL, fsb, latency);
|
|
|
|
policy->cur = powernow_get(0);
|
|
|
|
cpufreq_frequency_table_get_attr(powernow_table, policy->cpu);
|
|
|
|
return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
|
|
}
|
|
|
|
static int powernow_cpu_exit(struct cpufreq_policy *policy)
|
|
{
|
|
cpufreq_frequency_table_put_attr(policy->cpu);
|
|
|
|
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
|
|
if (acpi_processor_perf) {
|
|
acpi_processor_unregister_performance(acpi_processor_perf, 0);
|
|
free_cpumask_var(acpi_processor_perf->shared_cpu_map);
|
|
kfree(acpi_processor_perf);
|
|
}
|
|
#endif
|
|
|
|
kfree(powernow_table);
|
|
return 0;
|
|
}
|
|
|
|
static struct freq_attr *powernow_table_attr[] = {
|
|
&cpufreq_freq_attr_scaling_available_freqs,
|
|
NULL,
|
|
};
|
|
|
|
static struct cpufreq_driver powernow_driver = {
|
|
.verify = powernow_verify,
|
|
.target = powernow_target,
|
|
.get = powernow_get,
|
|
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
|
|
.bios_limit = acpi_processor_get_bios_limit,
|
|
#endif
|
|
.init = powernow_cpu_init,
|
|
.exit = powernow_cpu_exit,
|
|
.name = "powernow-k7",
|
|
.owner = THIS_MODULE,
|
|
.attr = powernow_table_attr,
|
|
};
|
|
|
|
static int __init powernow_init(void)
|
|
{
|
|
if (check_powernow() == 0)
|
|
return -ENODEV;
|
|
return cpufreq_register_driver(&powernow_driver);
|
|
}
|
|
|
|
|
|
static void __exit powernow_exit(void)
|
|
{
|
|
cpufreq_unregister_driver(&powernow_driver);
|
|
}
|
|
|
|
module_param(acpi_force, int, 0444);
|
|
MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
|
|
|
|
MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
|
|
MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
late_initcall(powernow_init);
|
|
module_exit(powernow_exit);
|
|
|