linux/drivers/ide/setup-pci.c
Bartlomiej Zolnierkiewicz 9f36d31437 ide: remove hw_regs_t typedef
Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:25 +02:00

702 lines
17 KiB
C

/*
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 1995-1998 Mark Lord
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
/**
* ide_setup_pci_baseregs - place a PCI IDE controller native
* @dev: PCI device of interface to switch native
* @name: Name of interface
*
* We attempt to place the PCI interface into PCI native mode. If
* we succeed the BARs are ok and the controller is in PCI mode.
* Returns 0 on success or an errno code.
*
* FIXME: if we program the interface and then fail to set the BARS
* we don't switch it back to legacy mode. Do we actually care ??
*/
static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
{
u8 progif = 0;
/*
* Place both IDE interfaces into PCI "native" mode:
*/
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
(progif & 5) != 5) {
if ((progif & 0xa) != 0xa) {
printk(KERN_INFO "%s %s: device not capable of full "
"native PCI mode\n", name, pci_name(dev));
return -EOPNOTSUPP;
}
printk(KERN_INFO "%s %s: placing both ports into native PCI "
"mode\n", name, pci_name(dev));
(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
(progif & 5) != 5) {
printk(KERN_ERR "%s %s: rewrite of PROGIF failed, "
"wanted 0x%04x, got 0x%04x\n",
name, pci_name(dev), progif | 5, progif);
return -EOPNOTSUPP;
}
}
return 0;
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
static int ide_pci_clear_simplex(unsigned long dma_base, const char *name)
{
u8 dma_stat = inb(dma_base + 2);
outb(dma_stat & 0x60, dma_base + 2);
dma_stat = inb(dma_base + 2);
return (dma_stat & 0x80) ? 1 : 0;
}
/**
* ide_pci_dma_base - setup BMIBA
* @hwif: IDE interface
* @d: IDE port info
*
* Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
*/
unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long dma_base = 0;
if (hwif->host_flags & IDE_HFLAG_MMIO)
return hwif->dma_base;
if (hwif->mate && hwif->mate->dma_base) {
dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
} else {
u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4;
dma_base = pci_resource_start(dev, baridx);
if (dma_base == 0) {
printk(KERN_ERR "%s %s: DMA base is invalid\n",
d->name, pci_name(dev));
return 0;
}
}
if (hwif->channel)
dma_base += 8;
return dma_base;
}
EXPORT_SYMBOL_GPL(ide_pci_dma_base);
int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 dma_stat;
if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
goto out;
if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
if (ide_pci_clear_simplex(hwif->dma_base, d->name))
printk(KERN_INFO "%s %s: simplex device: DMA forced\n",
d->name, pci_name(dev));
goto out;
}
/*
* If the device claims "simplex" DMA, this means that only one of
* the two interfaces can be trusted with DMA at any point in time
* (so we should enable DMA only on one of the two interfaces).
*
* FIXME: At this point we haven't probed the drives so we can't make
* the appropriate decision. Really we should defer this problem until
* we tune the drive then try to grab DMA ownership if we want to be
* the DMA end. This has to be become dynamic to handle hot-plug.
*/
dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
printk(KERN_INFO "%s %s: simplex device: DMA disabled\n",
d->name, pci_name(dev));
return -1;
}
out:
return 0;
}
EXPORT_SYMBOL_GPL(ide_pci_check_simplex);
/*
* Set up BM-DMA capability (PnP BIOS should have done this)
*/
int ide_pci_set_master(struct pci_dev *dev, const char *name)
{
u16 pcicmd;
pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
if ((pcicmd & PCI_COMMAND_MASTER) == 0) {
pci_set_master(dev);
if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
(pcicmd & PCI_COMMAND_MASTER) == 0) {
printk(KERN_ERR "%s %s: error updating PCICMD\n",
name, pci_name(dev));
return -EIO;
}
}
return 0;
}
EXPORT_SYMBOL_GPL(ide_pci_set_master);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
{
printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n",
d->name, pci_name(dev),
dev->vendor, dev->device, dev->revision);
}
EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
/**
* ide_pci_enable - do PCI enables
* @dev: PCI device
* @d: IDE port info
*
* Enable the IDE PCI device. We attempt to enable the device in full
* but if that fails then we only need IO space. The PCI code should
* have setup the proper resources for us already for controllers in
* legacy mode.
*
* Returns zero on success or an error code
*/
static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
{
int ret, bars;
if (pci_enable_device(dev)) {
ret = pci_enable_device_io(dev);
if (ret < 0) {
printk(KERN_WARNING "%s %s: couldn't enable device\n",
d->name, pci_name(dev));
goto out;
}
printk(KERN_WARNING "%s %s: BIOS configuration fixed\n",
d->name, pci_name(dev));
}
/*
* assume all devices can do 32-bit DMA for now, we can add
* a DMA mask field to the struct ide_port_info if we need it
* (or let lower level driver set the DMA mask)
*/
ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
if (ret < 0) {
printk(KERN_ERR "%s %s: can't set DMA mask\n",
d->name, pci_name(dev));
goto out;
}
if (d->host_flags & IDE_HFLAG_SINGLE)
bars = (1 << 2) - 1;
else
bars = (1 << 4) - 1;
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) {
if (d->host_flags & IDE_HFLAG_CS5520)
bars |= (1 << 2);
else
bars |= (1 << 4);
}
ret = pci_request_selected_regions(dev, bars, d->name);
if (ret < 0)
printk(KERN_ERR "%s %s: can't reserve resources\n",
d->name, pci_name(dev));
out:
return ret;
}
/**
* ide_pci_configure - configure an unconfigured device
* @dev: PCI device
* @d: IDE port info
*
* Enable and configure the PCI device we have been passed.
* Returns zero on success or an error code.
*/
static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d)
{
u16 pcicmd = 0;
/*
* PnP BIOS was *supposed* to have setup this device, but we
* can do it ourselves, so long as the BIOS has assigned an IRQ
* (or possibly the device is using a "legacy header" for IRQs).
* Maybe the user deliberately *disabled* the device,
* but we'll eventually ignore it again if no drives respond.
*/
if (ide_setup_pci_baseregs(dev, d->name) ||
pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) {
printk(KERN_INFO "%s %s: device disabled (BIOS)\n",
d->name, pci_name(dev));
return -ENODEV;
}
if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
printk(KERN_ERR "%s %s: error accessing PCI regs\n",
d->name, pci_name(dev));
return -EIO;
}
if (!(pcicmd & PCI_COMMAND_IO)) {
printk(KERN_ERR "%s %s: unable to enable IDE controller\n",
d->name, pci_name(dev));
return -ENXIO;
}
return 0;
}
/**
* ide_pci_check_iomem - check a register is I/O
* @dev: PCI device
* @d: IDE port info
* @bar: BAR number
*
* Checks if a BAR is configured and points to MMIO space. If so,
* return an error code. Otherwise return 0
*/
static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d,
int bar)
{
ulong flags = pci_resource_flags(dev, bar);
/* Unconfigured ? */
if (!flags || pci_resource_len(dev, bar) == 0)
return 0;
/* I/O space */
if (flags & IORESOURCE_IO)
return 0;
/* Bad */
return -EINVAL;
}
/**
* ide_hw_configure - configure a struct ide_hw instance
* @dev: PCI device holding interface
* @d: IDE port info
* @port: port number
* @hw: struct ide_hw instance corresponding to this port
*
* Perform the initial set up for the hardware interface structure. This
* is done per interface port rather than per PCI device. There may be
* more than one port per device.
*
* Returns zero on success or an error code.
*/
static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
unsigned int port, struct ide_hw *hw)
{
unsigned long ctl = 0, base = 0;
if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
if (ide_pci_check_iomem(dev, d, 2 * port) ||
ide_pci_check_iomem(dev, d, 2 * port + 1)) {
printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are "
"reported as MEM for port %d!\n",
d->name, pci_name(dev), port);
return -EINVAL;
}
ctl = pci_resource_start(dev, 2*port+1);
base = pci_resource_start(dev, 2*port);
} else {
/* Use default values */
ctl = port ? 0x374 : 0x3f4;
base = port ? 0x170 : 0x1f0;
}
if (!base || !ctl) {
printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n",
d->name, pci_name(dev), port);
return -EINVAL;
}
memset(hw, 0, sizeof(*hw));
hw->dev = &dev->dev;
ide_std_init_ports(hw, base, ctl | 2);
return 0;
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_hwif_setup_dma - configure DMA interface
* @hwif: IDE interface
* @d: IDE port info
*
* Set up the DMA base for the interface. Enable the master bits as
* necessary and attempt to bring the device DMA into a ready to use
* state
*/
int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
(dev->class & 0x80))) {
unsigned long base = ide_pci_dma_base(hwif, d);
if (base == 0)
return -1;
hwif->dma_base = base;
if (hwif->dma_ops == NULL)
hwif->dma_ops = &sff_dma_ops;
if (ide_pci_check_simplex(hwif, d) < 0)
return -1;
if (ide_pci_set_master(dev, d->name) < 0)
return -1;
if (hwif->host_flags & IDE_HFLAG_MMIO)
printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
else
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
hwif->name, base, base + 7);
hwif->extra_base = base + (hwif->channel ? 8 : 16);
if (ide_allocate_dma_engine(hwif))
return -1;
}
return 0;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
/**
* ide_setup_pci_controller - set up IDE PCI
* @dev: PCI device
* @d: IDE port info
* @noisy: verbose flag
*
* Set up the PCI and controller side of the IDE interface. This brings
* up the PCI side of the device, checks that the device is enabled
* and enables it if need be
*/
static int ide_setup_pci_controller(struct pci_dev *dev,
const struct ide_port_info *d, int noisy)
{
int ret;
u16 pcicmd;
if (noisy)
ide_setup_pci_noise(dev, d);
ret = ide_pci_enable(dev, d);
if (ret < 0)
goto out;
ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
if (ret < 0) {
printk(KERN_ERR "%s %s: error accessing PCI regs\n",
d->name, pci_name(dev));
goto out;
}
if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */
ret = ide_pci_configure(dev, d);
if (ret < 0)
goto out;
printk(KERN_INFO "%s %s: device enabled (Linux)\n",
d->name, pci_name(dev));
}
out:
return ret;
}
/**
* ide_pci_setup_ports - configure ports/devices on PCI IDE
* @dev: PCI device
* @d: IDE port info
* @hw: struct ide_hw instances corresponding to this PCI IDE device
* @hws: struct ide_hw pointers table to update
*
* Scan the interfaces attached to this device and do any
* necessary per port setup. Attach the devices and ask the
* generic DMA layer to do its work for us.
*
* Normally called automaticall from do_ide_pci_setup_device,
* but is also used directly as a helper function by some controllers
* where the chipset setup is not the default PCI IDE one.
*/
void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
struct ide_hw *hw, struct ide_hw **hws)
{
int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
u8 tmp;
/*
* Set up the IDE ports
*/
for (port = 0; port < channels; ++port) {
const struct ide_pci_enablebit *e = &d->enablebits[port];
if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
(tmp & e->mask) != e->val)) {
printk(KERN_INFO "%s %s: IDE port disabled\n",
d->name, pci_name(dev));
continue; /* port not enabled */
}
if (ide_hw_configure(dev, d, port, hw + port))
continue;
*(hws + port) = hw + port;
}
}
EXPORT_SYMBOL_GPL(ide_pci_setup_ports);
/*
* ide_setup_pci_device() looks at the primary/secondary interfaces
* on a PCI IDE device and, if they are enabled, prepares the IDE driver
* for use with them. This generic code works for most PCI chipsets.
*
* One thing that is not standardized is the location of the
* primary/secondary interface "enable/disable" bits. For chipsets that
* we "know" about, this information is in the struct ide_port_info;
* for all other chipsets, we just assume both interfaces are enabled.
*/
static int do_ide_setup_pci_device(struct pci_dev *dev,
const struct ide_port_info *d,
u8 noisy)
{
int pciirq, ret;
/*
* Can we trust the reported IRQ?
*/
pciirq = dev->irq;
/*
* This allows offboard ide-pci cards the enable a BIOS,
* verify interrupt settings of split-mirror pci-config
* space, place chipset into init-mode, and/or preserve
* an interrupt if the card is not native ide support.
*/
ret = d->init_chipset ? d->init_chipset(dev) : 0;
if (ret < 0)
goto out;
if (ide_pci_is_in_compatibility_mode(dev)) {
if (noisy)
printk(KERN_INFO "%s %s: not 100%% native mode: will "
"probe irqs later\n", d->name, pci_name(dev));
pciirq = 0;
} else if (!pciirq && noisy) {
printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n",
d->name, pci_name(dev), pciirq);
} else if (noisy) {
printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n",
d->name, pci_name(dev), pciirq);
}
ret = pciirq;
out:
return ret;
}
int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
void *priv)
{
struct ide_host *host;
struct ide_hw hw[2], *hws[] = { NULL, NULL };
int ret;
ret = ide_setup_pci_controller(dev, d, 1);
if (ret < 0)
goto out;
ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
host = ide_host_alloc(d, hws, 2);
if (host == NULL) {
ret = -ENOMEM;
goto out;
}
host->dev[0] = &dev->dev;
host->host_priv = priv;
host->irq_flags = IRQF_SHARED;
pci_set_drvdata(dev, host);
ret = do_ide_setup_pci_device(dev, d, 1);
if (ret < 0)
goto out;
/* fixup IRQ */
if (ide_pci_is_in_compatibility_mode(dev)) {
hw[0].irq = pci_get_legacy_ide_irq(dev, 0);
hw[1].irq = pci_get_legacy_ide_irq(dev, 1);
} else
hw[1].irq = hw[0].irq = ret;
ret = ide_host_register(host, d, hws);
if (ret)
ide_host_free(host);
out:
return ret;
}
EXPORT_SYMBOL_GPL(ide_pci_init_one);
int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
const struct ide_port_info *d, void *priv)
{
struct pci_dev *pdev[] = { dev1, dev2 };
struct ide_host *host;
int ret, i;
struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL };
for (i = 0; i < 2; i++) {
ret = ide_setup_pci_controller(pdev[i], d, !i);
if (ret < 0)
goto out;
ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]);
}
host = ide_host_alloc(d, hws, 4);
if (host == NULL) {
ret = -ENOMEM;
goto out;
}
host->dev[0] = &dev1->dev;
host->dev[1] = &dev2->dev;
host->host_priv = priv;
host->irq_flags = IRQF_SHARED;
pci_set_drvdata(pdev[0], host);
pci_set_drvdata(pdev[1], host);
for (i = 0; i < 2; i++) {
ret = do_ide_setup_pci_device(pdev[i], d, !i);
/*
* FIXME: Mom, mom, they stole me the helper function to undo
* do_ide_setup_pci_device() on the first device!
*/
if (ret < 0)
goto out;
/* fixup IRQ */
if (ide_pci_is_in_compatibility_mode(pdev[i])) {
hw[i*2].irq = pci_get_legacy_ide_irq(pdev[i], 0);
hw[i*2 + 1].irq = pci_get_legacy_ide_irq(pdev[i], 1);
} else
hw[i*2 + 1].irq = hw[i*2].irq = ret;
}
ret = ide_host_register(host, d, hws);
if (ret)
ide_host_free(host);
out:
return ret;
}
EXPORT_SYMBOL_GPL(ide_pci_init_two);
void ide_pci_remove(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
int bars;
if (host->host_flags & IDE_HFLAG_SINGLE)
bars = (1 << 2) - 1;
else
bars = (1 << 4) - 1;
if ((host->host_flags & IDE_HFLAG_NO_DMA) == 0) {
if (host->host_flags & IDE_HFLAG_CS5520)
bars |= (1 << 2);
else
bars |= (1 << 4);
}
ide_host_remove(host);
if (dev2)
pci_release_selected_regions(dev2, bars);
pci_release_selected_regions(dev, bars);
if (dev2)
pci_disable_device(dev2);
pci_disable_device(dev);
}
EXPORT_SYMBOL_GPL(ide_pci_remove);
#ifdef CONFIG_PM
int ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
{
pci_save_state(dev);
pci_disable_device(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
}
EXPORT_SYMBOL_GPL(ide_pci_suspend);
int ide_pci_resume(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
int rc;
pci_set_power_state(dev, PCI_D0);
rc = pci_enable_device(dev);
if (rc)
return rc;
pci_restore_state(dev);
pci_set_master(dev);
if (host->init_chipset)
host->init_chipset(dev);
return 0;
}
EXPORT_SYMBOL_GPL(ide_pci_resume);
#endif