2071 lines
56 KiB
C
2071 lines
56 KiB
C
/*
|
|
* IDE ATAPI streaming tape driver.
|
|
*
|
|
* Copyright (C) 1995-1999 Gadi Oxman <gadio@netvision.net.il>
|
|
* Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* This driver was constructed as a student project in the software laboratory
|
|
* of the faculty of electrical engineering in the Technion - Israel's
|
|
* Institute Of Technology, with the guide of Avner Lottem and Dr. Ilana David.
|
|
*
|
|
* It is hereby placed under the terms of the GNU general public license.
|
|
* (See linux/COPYING).
|
|
*
|
|
* For a historical changelog see
|
|
* Documentation/ide/ChangeLog.ide-tape.1995-2002
|
|
*/
|
|
|
|
#define DRV_NAME "ide-tape"
|
|
|
|
#define IDETAPE_VERSION "1.20"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/major.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mutex.h>
|
|
#include <scsi/scsi.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/io.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/mtio.h>
|
|
|
|
enum {
|
|
/* output errors only */
|
|
DBG_ERR = (1 << 0),
|
|
/* output all sense key/asc */
|
|
DBG_SENSE = (1 << 1),
|
|
/* info regarding all chrdev-related procedures */
|
|
DBG_CHRDEV = (1 << 2),
|
|
/* all remaining procedures */
|
|
DBG_PROCS = (1 << 3),
|
|
};
|
|
|
|
/* define to see debug info */
|
|
#define IDETAPE_DEBUG_LOG 0
|
|
|
|
#if IDETAPE_DEBUG_LOG
|
|
#define debug_log(lvl, fmt, args...) \
|
|
{ \
|
|
if (tape->debug_mask & lvl) \
|
|
printk(KERN_INFO "ide-tape: " fmt, ## args); \
|
|
}
|
|
#else
|
|
#define debug_log(lvl, fmt, args...) do {} while (0)
|
|
#endif
|
|
|
|
/**************************** Tunable parameters *****************************/
|
|
/*
|
|
* After each failed packet command we issue a request sense command and retry
|
|
* the packet command IDETAPE_MAX_PC_RETRIES times.
|
|
*
|
|
* Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
|
|
*/
|
|
#define IDETAPE_MAX_PC_RETRIES 3
|
|
|
|
/*
|
|
* The following parameter is used to select the point in the internal tape fifo
|
|
* in which we will start to refill the buffer. Decreasing the following
|
|
* parameter will improve the system's latency and interactive response, while
|
|
* using a high value might improve system throughput.
|
|
*/
|
|
#define IDETAPE_FIFO_THRESHOLD 2
|
|
|
|
/*
|
|
* DSC polling parameters.
|
|
*
|
|
* Polling for DSC (a single bit in the status register) is a very important
|
|
* function in ide-tape. There are two cases in which we poll for DSC:
|
|
*
|
|
* 1. Before a read/write packet command, to ensure that we can transfer data
|
|
* from/to the tape's data buffers, without causing an actual media access.
|
|
* In case the tape is not ready yet, we take out our request from the device
|
|
* request queue, so that ide.c could service requests from the other device
|
|
* on the same interface in the meantime.
|
|
*
|
|
* 2. After the successful initialization of a "media access packet command",
|
|
* which is a command that can take a long time to complete (the interval can
|
|
* range from several seconds to even an hour). Again, we postpone our request
|
|
* in the middle to free the bus for the other device. The polling frequency
|
|
* here should be lower than the read/write frequency since those media access
|
|
* commands are slow. We start from a "fast" frequency - IDETAPE_DSC_MA_FAST
|
|
* (1 second), and if we don't receive DSC after IDETAPE_DSC_MA_THRESHOLD
|
|
* (5 min), we switch it to a lower frequency - IDETAPE_DSC_MA_SLOW (1 min).
|
|
*
|
|
* We also set a timeout for the timer, in case something goes wrong. The
|
|
* timeout should be longer then the maximum execution time of a tape operation.
|
|
*/
|
|
|
|
/* DSC timings. */
|
|
#define IDETAPE_DSC_RW_MIN 5*HZ/100 /* 50 msec */
|
|
#define IDETAPE_DSC_RW_MAX 40*HZ/100 /* 400 msec */
|
|
#define IDETAPE_DSC_RW_TIMEOUT 2*60*HZ /* 2 minutes */
|
|
#define IDETAPE_DSC_MA_FAST 2*HZ /* 2 seconds */
|
|
#define IDETAPE_DSC_MA_THRESHOLD 5*60*HZ /* 5 minutes */
|
|
#define IDETAPE_DSC_MA_SLOW 30*HZ /* 30 seconds */
|
|
#define IDETAPE_DSC_MA_TIMEOUT 2*60*60*HZ /* 2 hours */
|
|
|
|
/*************************** End of tunable parameters ***********************/
|
|
|
|
/* tape directions */
|
|
enum {
|
|
IDETAPE_DIR_NONE = (1 << 0),
|
|
IDETAPE_DIR_READ = (1 << 1),
|
|
IDETAPE_DIR_WRITE = (1 << 2),
|
|
};
|
|
|
|
/* Tape door status */
|
|
#define DOOR_UNLOCKED 0
|
|
#define DOOR_LOCKED 1
|
|
#define DOOR_EXPLICITLY_LOCKED 2
|
|
|
|
/* Some defines for the SPACE command */
|
|
#define IDETAPE_SPACE_OVER_FILEMARK 1
|
|
#define IDETAPE_SPACE_TO_EOD 3
|
|
|
|
/* Some defines for the LOAD UNLOAD command */
|
|
#define IDETAPE_LU_LOAD_MASK 1
|
|
#define IDETAPE_LU_RETENSION_MASK 2
|
|
#define IDETAPE_LU_EOT_MASK 4
|
|
|
|
/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
|
|
#define IDETAPE_BLOCK_DESCRIPTOR 0
|
|
#define IDETAPE_CAPABILITIES_PAGE 0x2a
|
|
|
|
/*
|
|
* Most of our global data which we need to save even as we leave the driver due
|
|
* to an interrupt or a timer event is stored in the struct defined below.
|
|
*/
|
|
typedef struct ide_tape_obj {
|
|
ide_drive_t *drive;
|
|
struct ide_driver *driver;
|
|
struct gendisk *disk;
|
|
struct device dev;
|
|
|
|
/* used by REQ_IDETAPE_{READ,WRITE} requests */
|
|
struct ide_atapi_pc queued_pc;
|
|
|
|
/*
|
|
* DSC polling variables.
|
|
*
|
|
* While polling for DSC we use postponed_rq to postpone the current
|
|
* request so that ide.c will be able to service pending requests on the
|
|
* other device. Note that at most we will have only one DSC (usually
|
|
* data transfer) request in the device request queue.
|
|
*/
|
|
struct request *postponed_rq;
|
|
/* The time in which we started polling for DSC */
|
|
unsigned long dsc_polling_start;
|
|
/* Timer used to poll for dsc */
|
|
struct timer_list dsc_timer;
|
|
/* Read/Write dsc polling frequency */
|
|
unsigned long best_dsc_rw_freq;
|
|
unsigned long dsc_poll_freq;
|
|
unsigned long dsc_timeout;
|
|
|
|
/* Read position information */
|
|
u8 partition;
|
|
/* Current block */
|
|
unsigned int first_frame;
|
|
|
|
/* Last error information */
|
|
u8 sense_key, asc, ascq;
|
|
|
|
/* Character device operation */
|
|
unsigned int minor;
|
|
/* device name */
|
|
char name[4];
|
|
/* Current character device data transfer direction */
|
|
u8 chrdev_dir;
|
|
|
|
/* tape block size, usually 512 or 1024 bytes */
|
|
unsigned short blk_size;
|
|
int user_bs_factor;
|
|
|
|
/* Copy of the tape's Capabilities and Mechanical Page */
|
|
u8 caps[20];
|
|
|
|
/*
|
|
* Active data transfer request parameters.
|
|
*
|
|
* At most, there is only one ide-tape originated data transfer request
|
|
* in the device request queue. This allows ide.c to easily service
|
|
* requests from the other device when we postpone our active request.
|
|
*/
|
|
|
|
/* Data buffer size chosen based on the tape's recommendation */
|
|
int buffer_size;
|
|
/* Staging buffer of buffer_size bytes */
|
|
void *buf;
|
|
/* The read/write cursor */
|
|
void *cur;
|
|
/* The number of valid bytes in buf */
|
|
size_t valid;
|
|
|
|
/* Measures average tape speed */
|
|
unsigned long avg_time;
|
|
int avg_size;
|
|
int avg_speed;
|
|
|
|
/* the door is currently locked */
|
|
int door_locked;
|
|
/* the tape hardware is write protected */
|
|
char drv_write_prot;
|
|
/* the tape is write protected (hardware or opened as read-only) */
|
|
char write_prot;
|
|
|
|
u32 debug_mask;
|
|
} idetape_tape_t;
|
|
|
|
static DEFINE_MUTEX(idetape_ref_mutex);
|
|
|
|
static struct class *idetape_sysfs_class;
|
|
|
|
static void ide_tape_release(struct device *);
|
|
|
|
static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
|
|
{
|
|
struct ide_tape_obj *tape = NULL;
|
|
|
|
mutex_lock(&idetape_ref_mutex);
|
|
tape = ide_drv_g(disk, ide_tape_obj);
|
|
if (tape) {
|
|
if (ide_device_get(tape->drive))
|
|
tape = NULL;
|
|
else
|
|
get_device(&tape->dev);
|
|
}
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
return tape;
|
|
}
|
|
|
|
static void ide_tape_put(struct ide_tape_obj *tape)
|
|
{
|
|
ide_drive_t *drive = tape->drive;
|
|
|
|
mutex_lock(&idetape_ref_mutex);
|
|
put_device(&tape->dev);
|
|
ide_device_put(drive);
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
}
|
|
|
|
/*
|
|
* The variables below are used for the character device interface. Additional
|
|
* state variables are defined in our ide_drive_t structure.
|
|
*/
|
|
static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
|
|
|
|
static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
|
|
{
|
|
struct ide_tape_obj *tape = NULL;
|
|
|
|
mutex_lock(&idetape_ref_mutex);
|
|
tape = idetape_devs[i];
|
|
if (tape)
|
|
get_device(&tape->dev);
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
return tape;
|
|
}
|
|
|
|
/*
|
|
* called on each failed packet command retry to analyze the request sense. We
|
|
* currently do not utilize this information.
|
|
*/
|
|
static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc = drive->failed_pc;
|
|
|
|
tape->sense_key = sense[2] & 0xF;
|
|
tape->asc = sense[12];
|
|
tape->ascq = sense[13];
|
|
|
|
debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
|
|
pc->c[0], tape->sense_key, tape->asc, tape->ascq);
|
|
|
|
/* Correct pc->xferred by asking the tape. */
|
|
if (pc->flags & PC_FLAG_DMA_ERROR)
|
|
pc->xferred = pc->req_xfer -
|
|
tape->blk_size *
|
|
get_unaligned_be32(&sense[3]);
|
|
|
|
/*
|
|
* If error was the result of a zero-length read or write command,
|
|
* with sense key=5, asc=0x22, ascq=0, let it slide. Some drives
|
|
* (i.e. Seagate STT3401A Travan) don't support 0-length read/writes.
|
|
*/
|
|
if ((pc->c[0] == READ_6 || pc->c[0] == WRITE_6)
|
|
/* length == 0 */
|
|
&& pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) {
|
|
if (tape->sense_key == 5) {
|
|
/* don't report an error, everything's ok */
|
|
pc->error = 0;
|
|
/* don't retry read/write */
|
|
pc->flags |= PC_FLAG_ABORT;
|
|
}
|
|
}
|
|
if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
|
|
pc->error = IDE_DRV_ERROR_FILEMARK;
|
|
pc->flags |= PC_FLAG_ABORT;
|
|
}
|
|
if (pc->c[0] == WRITE_6) {
|
|
if ((sense[2] & 0x40) || (tape->sense_key == 0xd
|
|
&& tape->asc == 0x0 && tape->ascq == 0x2)) {
|
|
pc->error = IDE_DRV_ERROR_EOD;
|
|
pc->flags |= PC_FLAG_ABORT;
|
|
}
|
|
}
|
|
if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
|
|
if (tape->sense_key == 8) {
|
|
pc->error = IDE_DRV_ERROR_EOD;
|
|
pc->flags |= PC_FLAG_ABORT;
|
|
}
|
|
if (!(pc->flags & PC_FLAG_ABORT) &&
|
|
pc->xferred)
|
|
pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
|
|
}
|
|
}
|
|
|
|
static void ide_tape_handle_dsc(ide_drive_t *);
|
|
|
|
static int ide_tape_callback(ide_drive_t *drive, int dsc)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc = drive->pc;
|
|
struct request *rq = drive->hwif->rq;
|
|
int uptodate = pc->error ? 0 : 1;
|
|
int err = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
if (dsc)
|
|
ide_tape_handle_dsc(drive);
|
|
|
|
if (drive->failed_pc == pc)
|
|
drive->failed_pc = NULL;
|
|
|
|
if (pc->c[0] == REQUEST_SENSE) {
|
|
if (uptodate)
|
|
idetape_analyze_error(drive, pc->buf);
|
|
else
|
|
printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
|
|
"itself - Aborting request!\n");
|
|
} else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
|
|
int blocks = pc->xferred / tape->blk_size;
|
|
|
|
tape->avg_size += blocks * tape->blk_size;
|
|
|
|
if (time_after_eq(jiffies, tape->avg_time + HZ)) {
|
|
tape->avg_speed = tape->avg_size * HZ /
|
|
(jiffies - tape->avg_time) / 1024;
|
|
tape->avg_size = 0;
|
|
tape->avg_time = jiffies;
|
|
}
|
|
|
|
tape->first_frame += blocks;
|
|
rq->data_len -= blocks * tape->blk_size;
|
|
|
|
if (pc->error) {
|
|
uptodate = 0;
|
|
err = pc->error;
|
|
}
|
|
} else if (pc->c[0] == READ_POSITION && uptodate) {
|
|
u8 *readpos = pc->buf;
|
|
|
|
debug_log(DBG_SENSE, "BOP - %s\n",
|
|
(readpos[0] & 0x80) ? "Yes" : "No");
|
|
debug_log(DBG_SENSE, "EOP - %s\n",
|
|
(readpos[0] & 0x40) ? "Yes" : "No");
|
|
|
|
if (readpos[0] & 0x4) {
|
|
printk(KERN_INFO "ide-tape: Block location is unknown"
|
|
"to the tape\n");
|
|
clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
|
|
&drive->atapi_flags);
|
|
uptodate = 0;
|
|
err = IDE_DRV_ERROR_GENERAL;
|
|
} else {
|
|
debug_log(DBG_SENSE, "Block Location - %u\n",
|
|
be32_to_cpup((__be32 *)&readpos[4]));
|
|
|
|
tape->partition = readpos[1];
|
|
tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
|
|
set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
|
|
&drive->atapi_flags);
|
|
}
|
|
}
|
|
|
|
rq->errors = err;
|
|
|
|
return uptodate;
|
|
}
|
|
|
|
/*
|
|
* Postpone the current request so that ide.c will be able to service requests
|
|
* from another device on the same port while we are polling for DSC.
|
|
*/
|
|
static void idetape_postpone_request(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
tape->postponed_rq = drive->hwif->rq;
|
|
|
|
ide_stall_queue(drive, tape->dsc_poll_freq);
|
|
}
|
|
|
|
static void ide_tape_handle_dsc(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
/* Media access command */
|
|
tape->dsc_polling_start = jiffies;
|
|
tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
|
|
tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT;
|
|
/* Allow ide.c to handle other requests */
|
|
idetape_postpone_request(drive);
|
|
}
|
|
|
|
/*
|
|
* Packet Command Interface
|
|
*
|
|
* The current Packet Command is available in drive->pc, and will not change
|
|
* until we finish handling it. Each packet command is associated with a
|
|
* callback function that will be called when the command is finished.
|
|
*
|
|
* The handling will be done in three stages:
|
|
*
|
|
* 1. ide_tape_issue_pc will send the packet command to the drive, and will set
|
|
* the interrupt handler to ide_pc_intr.
|
|
*
|
|
* 2. On each interrupt, ide_pc_intr will be called. This step will be
|
|
* repeated until the device signals us that no more interrupts will be issued.
|
|
*
|
|
* 3. ATAPI Tape media access commands have immediate status with a delayed
|
|
* process. In case of a successful initiation of a media access packet command,
|
|
* the DSC bit will be set when the actual execution of the command is finished.
|
|
* Since the tape drive will not issue an interrupt, we have to poll for this
|
|
* event. In this case, we define the request as "low priority request" by
|
|
* setting rq_status to IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and
|
|
* exit the driver.
|
|
*
|
|
* ide.c will then give higher priority to requests which originate from the
|
|
* other device, until will change rq_status to RQ_ACTIVE.
|
|
*
|
|
* 4. When the packet command is finished, it will be checked for errors.
|
|
*
|
|
* 5. In case an error was found, we queue a request sense packet command in
|
|
* front of the request queue and retry the operation up to
|
|
* IDETAPE_MAX_PC_RETRIES times.
|
|
*
|
|
* 6. In case no error was found, or we decided to give up and not to retry
|
|
* again, the callback function will be called and then we will handle the next
|
|
* request.
|
|
*/
|
|
|
|
static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
|
|
struct ide_cmd *cmd,
|
|
struct ide_atapi_pc *pc)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
|
|
drive->failed_pc = pc;
|
|
|
|
/* Set the current packet command */
|
|
drive->pc = pc;
|
|
|
|
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
|
|
(pc->flags & PC_FLAG_ABORT)) {
|
|
unsigned int done = blk_rq_bytes(drive->hwif->rq);
|
|
|
|
/*
|
|
* We will "abort" retrying a packet command in case legitimate
|
|
* error code was received (crossing a filemark, or end of the
|
|
* media, for example).
|
|
*/
|
|
if (!(pc->flags & PC_FLAG_ABORT)) {
|
|
if (!(pc->c[0] == TEST_UNIT_READY &&
|
|
tape->sense_key == 2 && tape->asc == 4 &&
|
|
(tape->ascq == 1 || tape->ascq == 8))) {
|
|
printk(KERN_ERR "ide-tape: %s: I/O error, "
|
|
"pc = %2x, key = %2x, "
|
|
"asc = %2x, ascq = %2x\n",
|
|
tape->name, pc->c[0],
|
|
tape->sense_key, tape->asc,
|
|
tape->ascq);
|
|
}
|
|
/* Giving up */
|
|
pc->error = IDE_DRV_ERROR_GENERAL;
|
|
}
|
|
|
|
drive->failed_pc = NULL;
|
|
drive->pc_callback(drive, 0);
|
|
ide_complete_rq(drive, -EIO, done);
|
|
return ide_stopped;
|
|
}
|
|
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
|
|
|
|
pc->retries++;
|
|
|
|
return ide_issue_pc(drive, cmd);
|
|
}
|
|
|
|
/* A mode sense command is used to "sense" tape parameters. */
|
|
static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = MODE_SENSE;
|
|
if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
|
|
/* DBD = 1 - Don't return block descriptors */
|
|
pc->c[1] = 8;
|
|
pc->c[2] = page_code;
|
|
/*
|
|
* Changed pc->c[3] to 0 (255 will at best return unused info).
|
|
*
|
|
* For SCSI this byte is defined as subpage instead of high byte
|
|
* of length and some IDE drives seem to interpret it this way
|
|
* and return an error when 255 is used.
|
|
*/
|
|
pc->c[3] = 0;
|
|
/* We will just discard data in that case */
|
|
pc->c[4] = 255;
|
|
if (page_code == IDETAPE_BLOCK_DESCRIPTOR)
|
|
pc->req_xfer = 12;
|
|
else if (page_code == IDETAPE_CAPABILITIES_PAGE)
|
|
pc->req_xfer = 24;
|
|
else
|
|
pc->req_xfer = 50;
|
|
}
|
|
|
|
static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc = drive->pc;
|
|
u8 stat;
|
|
|
|
stat = hwif->tp_ops->read_status(hwif);
|
|
|
|
if (stat & ATA_DSC) {
|
|
if (stat & ATA_ERR) {
|
|
/* Error detected */
|
|
if (pc->c[0] != TEST_UNIT_READY)
|
|
printk(KERN_ERR "ide-tape: %s: I/O error, ",
|
|
tape->name);
|
|
/* Retry operation */
|
|
ide_retry_pc(drive);
|
|
return ide_stopped;
|
|
}
|
|
pc->error = 0;
|
|
} else {
|
|
pc->error = IDE_DRV_ERROR_GENERAL;
|
|
drive->failed_pc = NULL;
|
|
}
|
|
drive->pc_callback(drive, 0);
|
|
return ide_stopped;
|
|
}
|
|
|
|
static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
|
|
struct ide_atapi_pc *pc, struct request *rq,
|
|
u8 opcode)
|
|
{
|
|
unsigned int length = rq->nr_sectors;
|
|
|
|
ide_init_pc(pc);
|
|
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
|
|
pc->c[1] = 1;
|
|
pc->buf = NULL;
|
|
pc->buf_size = length * tape->blk_size;
|
|
pc->req_xfer = pc->buf_size;
|
|
if (pc->req_xfer == tape->buffer_size)
|
|
pc->flags |= PC_FLAG_DMA_OK;
|
|
|
|
if (opcode == READ_6)
|
|
pc->c[0] = READ_6;
|
|
else if (opcode == WRITE_6) {
|
|
pc->c[0] = WRITE_6;
|
|
pc->flags |= PC_FLAG_WRITING;
|
|
}
|
|
|
|
memcpy(rq->cmd, pc->c, 12);
|
|
}
|
|
|
|
static ide_startstop_t idetape_do_request(ide_drive_t *drive,
|
|
struct request *rq, sector_t block)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc = NULL;
|
|
struct request *postponed_rq = tape->postponed_rq;
|
|
struct ide_cmd cmd;
|
|
u8 stat;
|
|
|
|
debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n",
|
|
(unsigned long long)rq->sector, rq->nr_sectors);
|
|
|
|
if (!(blk_special_request(rq) || blk_sense_request(rq))) {
|
|
/* We do not support buffer cache originated requests. */
|
|
printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
|
|
"request queue (%d)\n", drive->name, rq->cmd_type);
|
|
if (blk_fs_request(rq) == 0 && rq->errors == 0)
|
|
rq->errors = -EIO;
|
|
ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
|
|
return ide_stopped;
|
|
}
|
|
|
|
/* Retry a failed packet command */
|
|
if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
|
|
pc = drive->failed_pc;
|
|
goto out;
|
|
}
|
|
|
|
if (postponed_rq != NULL)
|
|
if (rq != postponed_rq) {
|
|
printk(KERN_ERR "ide-tape: ide-tape.c bug - "
|
|
"Two DSC requests were queued\n");
|
|
drive->failed_pc = NULL;
|
|
rq->errors = 0;
|
|
ide_complete_rq(drive, 0, blk_rq_bytes(rq));
|
|
return ide_stopped;
|
|
}
|
|
|
|
tape->postponed_rq = NULL;
|
|
|
|
/*
|
|
* If the tape is still busy, postpone our request and service
|
|
* the other device meanwhile.
|
|
*/
|
|
stat = hwif->tp_ops->read_status(hwif);
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
|
|
(rq->cmd[13] & REQ_IDETAPE_PC2) == 0)
|
|
drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
|
|
|
|
if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
|
|
drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
|
|
drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
|
|
}
|
|
|
|
if (!(drive->atapi_flags & IDE_AFLAG_IGNORE_DSC) &&
|
|
!(stat & ATA_DSC)) {
|
|
if (postponed_rq == NULL) {
|
|
tape->dsc_polling_start = jiffies;
|
|
tape->dsc_poll_freq = tape->best_dsc_rw_freq;
|
|
tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT;
|
|
} else if (time_after(jiffies, tape->dsc_timeout)) {
|
|
printk(KERN_ERR "ide-tape: %s: DSC timeout\n",
|
|
tape->name);
|
|
if (rq->cmd[13] & REQ_IDETAPE_PC2) {
|
|
idetape_media_access_finished(drive);
|
|
return ide_stopped;
|
|
} else {
|
|
return ide_do_reset(drive);
|
|
}
|
|
} else if (time_after(jiffies,
|
|
tape->dsc_polling_start +
|
|
IDETAPE_DSC_MA_THRESHOLD))
|
|
tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
|
|
idetape_postpone_request(drive);
|
|
return ide_stopped;
|
|
} else
|
|
drive->atapi_flags &= ~IDE_AFLAG_IGNORE_DSC;
|
|
|
|
if (rq->cmd[13] & REQ_IDETAPE_READ) {
|
|
pc = &tape->queued_pc;
|
|
ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
|
|
goto out;
|
|
}
|
|
if (rq->cmd[13] & REQ_IDETAPE_WRITE) {
|
|
pc = &tape->queued_pc;
|
|
ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6);
|
|
goto out;
|
|
}
|
|
if (rq->cmd[13] & REQ_IDETAPE_PC1) {
|
|
pc = (struct ide_atapi_pc *)rq->special;
|
|
rq->cmd[13] &= ~(REQ_IDETAPE_PC1);
|
|
rq->cmd[13] |= REQ_IDETAPE_PC2;
|
|
goto out;
|
|
}
|
|
if (rq->cmd[13] & REQ_IDETAPE_PC2) {
|
|
idetape_media_access_finished(drive);
|
|
return ide_stopped;
|
|
}
|
|
BUG();
|
|
|
|
out:
|
|
/* prepare sense request for this command */
|
|
ide_prep_sense(drive, rq);
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
|
|
if (rq_data_dir(rq))
|
|
cmd.tf_flags |= IDE_TFLAG_WRITE;
|
|
|
|
cmd.rq = rq;
|
|
|
|
ide_init_sg_cmd(&cmd, pc->req_xfer);
|
|
ide_map_sg(drive, &cmd);
|
|
|
|
return ide_tape_issue_pc(drive, &cmd, pc);
|
|
}
|
|
|
|
/*
|
|
* Write a filemark if write_filemark=1. Flush the device buffers without
|
|
* writing a filemark otherwise.
|
|
*/
|
|
static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc, int write_filemark)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = WRITE_FILEMARKS;
|
|
pc->c[4] = write_filemark;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct gendisk *disk = tape->disk;
|
|
int load_attempted = 0;
|
|
|
|
/* Wait for the tape to become ready */
|
|
set_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), &drive->atapi_flags);
|
|
timeout += jiffies;
|
|
while (time_before(jiffies, timeout)) {
|
|
if (ide_do_test_unit_ready(drive, disk) == 0)
|
|
return 0;
|
|
if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
|
|
|| (tape->asc == 0x3A)) {
|
|
/* no media */
|
|
if (load_attempted)
|
|
return -ENOMEDIUM;
|
|
ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
|
|
load_attempted = 1;
|
|
/* not about to be ready */
|
|
} else if (!(tape->sense_key == 2 && tape->asc == 4 &&
|
|
(tape->ascq == 1 || tape->ascq == 8)))
|
|
return -EIO;
|
|
msleep(100);
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
static int idetape_flush_tape_buffers(ide_drive_t *drive)
|
|
{
|
|
struct ide_tape_obj *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
int rc;
|
|
|
|
idetape_create_write_filemark_cmd(drive, &pc, 0);
|
|
rc = ide_queue_pc_tail(drive, tape->disk, &pc);
|
|
if (rc)
|
|
return rc;
|
|
idetape_wait_ready(drive, 60 * 5 * HZ);
|
|
return 0;
|
|
}
|
|
|
|
static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = READ_POSITION;
|
|
pc->req_xfer = 20;
|
|
}
|
|
|
|
static int idetape_read_position(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
int position;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
idetape_create_read_position_cmd(&pc);
|
|
if (ide_queue_pc_tail(drive, tape->disk, &pc))
|
|
return -1;
|
|
position = tape->first_frame;
|
|
return position;
|
|
}
|
|
|
|
static void idetape_create_locate_cmd(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc,
|
|
unsigned int block, u8 partition, int skip)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = POSITION_TO_ELEMENT;
|
|
pc->c[1] = 2;
|
|
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
|
|
pc->c[8] = partition;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
if (tape->chrdev_dir != IDETAPE_DIR_READ)
|
|
return;
|
|
|
|
clear_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags);
|
|
tape->valid = 0;
|
|
if (tape->buf != NULL) {
|
|
kfree(tape->buf);
|
|
tape->buf = NULL;
|
|
}
|
|
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
}
|
|
|
|
/*
|
|
* Position the tape to the requested block using the LOCATE packet command.
|
|
* A READ POSITION command is then issued to check where we are positioned. Like
|
|
* all higher level operations, we queue the commands at the tail of the request
|
|
* queue and wait for their completion.
|
|
*/
|
|
static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
|
|
u8 partition, int skip)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct gendisk *disk = tape->disk;
|
|
int retval;
|
|
struct ide_atapi_pc pc;
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ)
|
|
__ide_tape_discard_merge_buffer(drive);
|
|
idetape_wait_ready(drive, 60 * 5 * HZ);
|
|
idetape_create_locate_cmd(drive, &pc, block, partition, skip);
|
|
retval = ide_queue_pc_tail(drive, disk, &pc);
|
|
if (retval)
|
|
return (retval);
|
|
|
|
idetape_create_read_position_cmd(&pc);
|
|
return ide_queue_pc_tail(drive, disk, &pc);
|
|
}
|
|
|
|
static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
|
|
int restore_position)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
int seek, position;
|
|
|
|
__ide_tape_discard_merge_buffer(drive);
|
|
if (restore_position) {
|
|
position = idetape_read_position(drive);
|
|
seek = position > 0 ? position : 0;
|
|
if (idetape_position_tape(drive, seek, 0, 0)) {
|
|
printk(KERN_INFO "ide-tape: %s: position_tape failed in"
|
|
" %s\n", tape->name, __func__);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Generate a read/write request for the block device interface and wait for it
|
|
* to be serviced.
|
|
*/
|
|
static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct request *rq;
|
|
int ret;
|
|
|
|
debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
|
|
BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
|
|
BUG_ON(size < 0 || size % tape->blk_size);
|
|
|
|
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
|
|
rq->cmd_type = REQ_TYPE_SPECIAL;
|
|
rq->cmd[13] = cmd;
|
|
rq->rq_disk = tape->disk;
|
|
rq->sector = tape->first_frame;
|
|
|
|
if (size) {
|
|
ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size,
|
|
__GFP_WAIT);
|
|
if (ret)
|
|
goto out_put;
|
|
}
|
|
|
|
blk_execute_rq(drive->queue, tape->disk, rq, 0);
|
|
|
|
/* calculate the number of transferred bytes and update buffer state */
|
|
size -= rq->data_len;
|
|
tape->cur = tape->buf;
|
|
if (cmd == REQ_IDETAPE_READ)
|
|
tape->valid = size;
|
|
else
|
|
tape->valid = 0;
|
|
|
|
ret = size;
|
|
if (rq->errors == IDE_DRV_ERROR_GENERAL)
|
|
ret = -EIO;
|
|
out_put:
|
|
blk_put_request(rq);
|
|
return ret;
|
|
}
|
|
|
|
static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = INQUIRY;
|
|
pc->c[4] = 254;
|
|
pc->req_xfer = 254;
|
|
}
|
|
|
|
static void idetape_create_rewind_cmd(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = REZERO_UNIT;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = ERASE;
|
|
pc->c[1] = 1;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = SPACE;
|
|
put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
|
|
pc->c[1] = cmd;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
|
|
printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
|
|
" but we are not writing.\n");
|
|
return;
|
|
}
|
|
if (tape->buf) {
|
|
size_t aligned = roundup(tape->valid, tape->blk_size);
|
|
|
|
memset(tape->cur, 0, aligned - tape->valid);
|
|
idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned);
|
|
kfree(tape->buf);
|
|
tape->buf = NULL;
|
|
}
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
}
|
|
|
|
static int idetape_init_rw(ide_drive_t *drive, int dir)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
int rc;
|
|
|
|
BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE);
|
|
|
|
if (tape->chrdev_dir == dir)
|
|
return 0;
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ)
|
|
ide_tape_discard_merge_buffer(drive, 1);
|
|
else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
|
|
ide_tape_flush_merge_buffer(drive);
|
|
idetape_flush_tape_buffers(drive);
|
|
}
|
|
|
|
if (tape->buf || tape->valid) {
|
|
printk(KERN_ERR "ide-tape: valid should be 0 now\n");
|
|
tape->valid = 0;
|
|
}
|
|
|
|
tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
|
|
if (!tape->buf)
|
|
return -ENOMEM;
|
|
tape->chrdev_dir = dir;
|
|
tape->cur = tape->buf;
|
|
|
|
/*
|
|
* Issue a 0 rw command to ensure that DSC handshake is
|
|
* switched from completion mode to buffer available mode. No
|
|
* point in issuing this if DSC overlap isn't supported, some
|
|
* drives (Seagate STT3401A) will return an error.
|
|
*/
|
|
if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
|
|
int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ
|
|
: REQ_IDETAPE_WRITE;
|
|
|
|
rc = idetape_queue_rw_tail(drive, cmd, 0);
|
|
if (rc < 0) {
|
|
kfree(tape->buf);
|
|
tape->buf = NULL;
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
memset(tape->buf, 0, tape->buffer_size);
|
|
|
|
while (bcount) {
|
|
unsigned int count = min(tape->buffer_size, bcount);
|
|
|
|
idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count);
|
|
bcount -= count;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Rewinds the tape to the Beginning Of the current Partition (BOP). We
|
|
* currently support only one partition.
|
|
*/
|
|
static int idetape_rewind_tape(ide_drive_t *drive)
|
|
{
|
|
struct ide_tape_obj *tape = drive->driver_data;
|
|
struct gendisk *disk = tape->disk;
|
|
int retval;
|
|
struct ide_atapi_pc pc;
|
|
|
|
debug_log(DBG_SENSE, "Enter %s\n", __func__);
|
|
|
|
idetape_create_rewind_cmd(drive, &pc);
|
|
retval = ide_queue_pc_tail(drive, disk, &pc);
|
|
if (retval)
|
|
return retval;
|
|
|
|
idetape_create_read_position_cmd(&pc);
|
|
retval = ide_queue_pc_tail(drive, disk, &pc);
|
|
if (retval)
|
|
return retval;
|
|
return 0;
|
|
}
|
|
|
|
/* mtio.h compatible commands should be issued to the chrdev interface. */
|
|
static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
struct idetape_config {
|
|
int dsc_rw_frequency;
|
|
int dsc_media_access_frequency;
|
|
int nr_stages;
|
|
} config;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
switch (cmd) {
|
|
case 0x0340:
|
|
if (copy_from_user(&config, argp, sizeof(config)))
|
|
return -EFAULT;
|
|
tape->best_dsc_rw_freq = config.dsc_rw_frequency;
|
|
break;
|
|
case 0x0350:
|
|
config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
|
|
config.nr_stages = 1;
|
|
if (copy_to_user(argp, &config, sizeof(config)))
|
|
return -EFAULT;
|
|
break;
|
|
default:
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
|
|
int mt_count)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct gendisk *disk = tape->disk;
|
|
struct ide_atapi_pc pc;
|
|
int retval, count = 0;
|
|
int sprev = !!(tape->caps[4] & 0x20);
|
|
|
|
if (mt_count == 0)
|
|
return 0;
|
|
if (MTBSF == mt_op || MTBSFM == mt_op) {
|
|
if (!sprev)
|
|
return -EIO;
|
|
mt_count = -mt_count;
|
|
}
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
|
|
tape->valid = 0;
|
|
if (test_and_clear_bit(ilog2(IDE_AFLAG_FILEMARK),
|
|
&drive->atapi_flags))
|
|
++count;
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
}
|
|
|
|
switch (mt_op) {
|
|
case MTFSF:
|
|
case MTBSF:
|
|
idetape_create_space_cmd(&pc, mt_count - count,
|
|
IDETAPE_SPACE_OVER_FILEMARK);
|
|
return ide_queue_pc_tail(drive, disk, &pc);
|
|
case MTFSFM:
|
|
case MTBSFM:
|
|
if (!sprev)
|
|
return -EIO;
|
|
retval = idetape_space_over_filemarks(drive, MTFSF,
|
|
mt_count - count);
|
|
if (retval)
|
|
return retval;
|
|
count = (MTBSFM == mt_op ? 1 : -1);
|
|
return idetape_space_over_filemarks(drive, MTFSF, count);
|
|
default:
|
|
printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
|
|
mt_op);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Our character device read / write functions.
|
|
*
|
|
* The tape is optimized to maximize throughput when it is transferring an
|
|
* integral number of the "continuous transfer limit", which is a parameter of
|
|
* the specific tape (26kB on my particular tape, 32kB for Onstream).
|
|
*
|
|
* As of version 1.3 of the driver, the character device provides an abstract
|
|
* continuous view of the media - any mix of block sizes (even 1 byte) on the
|
|
* same backup/restore procedure is supported. The driver will internally
|
|
* convert the requests to the recommended transfer unit, so that an unmatch
|
|
* between the user's block size to the recommended size will only result in a
|
|
* (slightly) increased driver overhead, but will no longer hit performance.
|
|
* This is not applicable to Onstream.
|
|
*/
|
|
static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ide_tape_obj *tape = file->private_data;
|
|
ide_drive_t *drive = tape->drive;
|
|
size_t done = 0;
|
|
ssize_t ret = 0;
|
|
int rc;
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
|
|
|
|
if (tape->chrdev_dir != IDETAPE_DIR_READ) {
|
|
if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags))
|
|
if (count > tape->blk_size &&
|
|
(count % tape->blk_size) == 0)
|
|
tape->user_bs_factor = count / tape->blk_size;
|
|
}
|
|
|
|
rc = idetape_init_rw(drive, IDETAPE_DIR_READ);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
while (done < count) {
|
|
size_t todo;
|
|
|
|
/* refill if staging buffer is empty */
|
|
if (!tape->valid) {
|
|
/* If we are at a filemark, nothing more to read */
|
|
if (test_bit(ilog2(IDE_AFLAG_FILEMARK),
|
|
&drive->atapi_flags))
|
|
break;
|
|
/* read */
|
|
if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
|
|
tape->buffer_size) <= 0)
|
|
break;
|
|
}
|
|
|
|
/* copy out */
|
|
todo = min_t(size_t, count - done, tape->valid);
|
|
if (copy_to_user(buf + done, tape->cur, todo))
|
|
ret = -EFAULT;
|
|
|
|
tape->cur += todo;
|
|
tape->valid -= todo;
|
|
done += todo;
|
|
}
|
|
|
|
if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) {
|
|
debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
|
|
|
|
idetape_space_over_filemarks(drive, MTFSF, 1);
|
|
return 0;
|
|
}
|
|
|
|
return ret ? ret : done;
|
|
}
|
|
|
|
static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ide_tape_obj *tape = file->private_data;
|
|
ide_drive_t *drive = tape->drive;
|
|
size_t done = 0;
|
|
ssize_t ret = 0;
|
|
int rc;
|
|
|
|
/* The drive is write protected. */
|
|
if (tape->write_prot)
|
|
return -EACCES;
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
|
|
|
|
/* Initialize write operation */
|
|
rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
while (done < count) {
|
|
size_t todo;
|
|
|
|
/* flush if staging buffer is full */
|
|
if (tape->valid == tape->buffer_size &&
|
|
idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
|
|
tape->buffer_size) <= 0)
|
|
return rc;
|
|
|
|
/* copy in */
|
|
todo = min_t(size_t, count - done,
|
|
tape->buffer_size - tape->valid);
|
|
if (copy_from_user(tape->cur, buf + done, todo))
|
|
ret = -EFAULT;
|
|
|
|
tape->cur += todo;
|
|
tape->valid += todo;
|
|
done += todo;
|
|
}
|
|
|
|
return ret ? ret : done;
|
|
}
|
|
|
|
static int idetape_write_filemark(ide_drive_t *drive)
|
|
{
|
|
struct ide_tape_obj *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
|
|
/* Write a filemark */
|
|
idetape_create_write_filemark_cmd(drive, &pc, 1);
|
|
if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
|
|
printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called from idetape_chrdev_ioctl when the general mtio MTIOCTOP ioctl is
|
|
* requested.
|
|
*
|
|
* Note: MTBSF and MTBSFM are not supported when the tape doesn't support
|
|
* spacing over filemarks in the reverse direction. In this case, MTFSFM is also
|
|
* usually not supported.
|
|
*
|
|
* The following commands are currently not supported:
|
|
*
|
|
* MTFSS, MTBSS, MTWSM, MTSETDENSITY, MTSETDRVBUFFER, MT_ST_BOOLEANS,
|
|
* MT_ST_WRITE_THRESHOLD.
|
|
*/
|
|
static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct gendisk *disk = tape->disk;
|
|
struct ide_atapi_pc pc;
|
|
int i, retval;
|
|
|
|
debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
|
|
mt_op, mt_count);
|
|
|
|
switch (mt_op) {
|
|
case MTFSF:
|
|
case MTFSFM:
|
|
case MTBSF:
|
|
case MTBSFM:
|
|
if (!mt_count)
|
|
return 0;
|
|
return idetape_space_over_filemarks(drive, mt_op, mt_count);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (mt_op) {
|
|
case MTWEOF:
|
|
if (tape->write_prot)
|
|
return -EACCES;
|
|
ide_tape_discard_merge_buffer(drive, 1);
|
|
for (i = 0; i < mt_count; i++) {
|
|
retval = idetape_write_filemark(drive);
|
|
if (retval)
|
|
return retval;
|
|
}
|
|
return 0;
|
|
case MTREW:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
if (idetape_rewind_tape(drive))
|
|
return -EIO;
|
|
return 0;
|
|
case MTLOAD:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
return ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
|
|
case MTUNLOAD:
|
|
case MTOFFL:
|
|
/*
|
|
* If door is locked, attempt to unlock before
|
|
* attempting to eject.
|
|
*/
|
|
if (tape->door_locked) {
|
|
if (!ide_set_media_lock(drive, disk, 0))
|
|
tape->door_locked = DOOR_UNLOCKED;
|
|
}
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
|
|
if (!retval)
|
|
clear_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
|
|
&drive->atapi_flags);
|
|
return retval;
|
|
case MTNOP:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
return idetape_flush_tape_buffers(drive);
|
|
case MTRETEN:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
return ide_do_start_stop(drive, disk,
|
|
IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
|
|
case MTEOM:
|
|
idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
|
|
return ide_queue_pc_tail(drive, disk, &pc);
|
|
case MTERASE:
|
|
(void)idetape_rewind_tape(drive);
|
|
idetape_create_erase_cmd(&pc);
|
|
return ide_queue_pc_tail(drive, disk, &pc);
|
|
case MTSETBLK:
|
|
if (mt_count) {
|
|
if (mt_count < tape->blk_size ||
|
|
mt_count % tape->blk_size)
|
|
return -EIO;
|
|
tape->user_bs_factor = mt_count / tape->blk_size;
|
|
clear_bit(ilog2(IDE_AFLAG_DETECT_BS),
|
|
&drive->atapi_flags);
|
|
} else
|
|
set_bit(ilog2(IDE_AFLAG_DETECT_BS),
|
|
&drive->atapi_flags);
|
|
return 0;
|
|
case MTSEEK:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
return idetape_position_tape(drive,
|
|
mt_count * tape->user_bs_factor, tape->partition, 0);
|
|
case MTSETPART:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
return idetape_position_tape(drive, 0, mt_count, 0);
|
|
case MTFSR:
|
|
case MTBSR:
|
|
case MTLOCK:
|
|
retval = ide_set_media_lock(drive, disk, 1);
|
|
if (retval)
|
|
return retval;
|
|
tape->door_locked = DOOR_EXPLICITLY_LOCKED;
|
|
return 0;
|
|
case MTUNLOCK:
|
|
retval = ide_set_media_lock(drive, disk, 0);
|
|
if (retval)
|
|
return retval;
|
|
tape->door_locked = DOOR_UNLOCKED;
|
|
return 0;
|
|
default:
|
|
printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
|
|
mt_op);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Our character device ioctls. General mtio.h magnetic io commands are
|
|
* supported here, and not in the corresponding block interface. Our own
|
|
* ide-tape ioctls are supported on both interfaces.
|
|
*/
|
|
static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct ide_tape_obj *tape = file->private_data;
|
|
ide_drive_t *drive = tape->drive;
|
|
struct mtop mtop;
|
|
struct mtget mtget;
|
|
struct mtpos mtpos;
|
|
int block_offset = 0, position = tape->first_frame;
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd);
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
|
|
ide_tape_flush_merge_buffer(drive);
|
|
idetape_flush_tape_buffers(drive);
|
|
}
|
|
if (cmd == MTIOCGET || cmd == MTIOCPOS) {
|
|
block_offset = tape->valid /
|
|
(tape->blk_size * tape->user_bs_factor);
|
|
position = idetape_read_position(drive);
|
|
if (position < 0)
|
|
return -EIO;
|
|
}
|
|
switch (cmd) {
|
|
case MTIOCTOP:
|
|
if (copy_from_user(&mtop, argp, sizeof(struct mtop)))
|
|
return -EFAULT;
|
|
return idetape_mtioctop(drive, mtop.mt_op, mtop.mt_count);
|
|
case MTIOCGET:
|
|
memset(&mtget, 0, sizeof(struct mtget));
|
|
mtget.mt_type = MT_ISSCSI2;
|
|
mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
|
|
mtget.mt_dsreg =
|
|
((tape->blk_size * tape->user_bs_factor)
|
|
<< MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
|
|
|
|
if (tape->drv_write_prot)
|
|
mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
|
|
|
|
if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
|
|
return -EFAULT;
|
|
return 0;
|
|
case MTIOCPOS:
|
|
mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
|
|
if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
|
|
return -EFAULT;
|
|
return 0;
|
|
default:
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ)
|
|
ide_tape_discard_merge_buffer(drive, 1);
|
|
return idetape_blkdev_ioctl(drive, cmd, arg);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Do a mode sense page 0 with block descriptor and if it succeeds set the tape
|
|
* block size with the reported value.
|
|
*/
|
|
static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
|
|
idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
|
|
if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
|
|
printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
|
|
if (tape->blk_size == 0) {
|
|
printk(KERN_WARNING "ide-tape: Cannot deal with zero "
|
|
"block size, assuming 32k\n");
|
|
tape->blk_size = 32768;
|
|
}
|
|
return;
|
|
}
|
|
tape->blk_size = (pc.buf[4 + 5] << 16) +
|
|
(pc.buf[4 + 6] << 8) +
|
|
pc.buf[4 + 7];
|
|
tape->drv_write_prot = (pc.buf[2] & 0x80) >> 7;
|
|
}
|
|
|
|
static int idetape_chrdev_open(struct inode *inode, struct file *filp)
|
|
{
|
|
unsigned int minor = iminor(inode), i = minor & ~0xc0;
|
|
ide_drive_t *drive;
|
|
idetape_tape_t *tape;
|
|
int retval;
|
|
|
|
if (i >= MAX_HWIFS * MAX_DRIVES)
|
|
return -ENXIO;
|
|
|
|
lock_kernel();
|
|
tape = ide_tape_chrdev_get(i);
|
|
if (!tape) {
|
|
unlock_kernel();
|
|
return -ENXIO;
|
|
}
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
|
|
|
|
/*
|
|
* We really want to do nonseekable_open(inode, filp); here, but some
|
|
* versions of tar incorrectly call lseek on tapes and bail out if that
|
|
* fails. So we disallow pread() and pwrite(), but permit lseeks.
|
|
*/
|
|
filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
|
|
|
|
drive = tape->drive;
|
|
|
|
filp->private_data = tape;
|
|
|
|
if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) {
|
|
retval = -EBUSY;
|
|
goto out_put_tape;
|
|
}
|
|
|
|
retval = idetape_wait_ready(drive, 60 * HZ);
|
|
if (retval) {
|
|
clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
|
|
printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
|
|
goto out_put_tape;
|
|
}
|
|
|
|
idetape_read_position(drive);
|
|
if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags))
|
|
(void)idetape_rewind_tape(drive);
|
|
|
|
/* Read block size and write protect status from drive. */
|
|
ide_tape_get_bsize_from_bdesc(drive);
|
|
|
|
/* Set write protect flag if device is opened as read-only. */
|
|
if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
|
|
tape->write_prot = 1;
|
|
else
|
|
tape->write_prot = tape->drv_write_prot;
|
|
|
|
/* Make sure drive isn't write protected if user wants to write. */
|
|
if (tape->write_prot) {
|
|
if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
|
|
(filp->f_flags & O_ACCMODE) == O_RDWR) {
|
|
clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
|
|
retval = -EROFS;
|
|
goto out_put_tape;
|
|
}
|
|
}
|
|
|
|
/* Lock the tape drive door so user can't eject. */
|
|
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
|
|
if (!ide_set_media_lock(drive, tape->disk, 1)) {
|
|
if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
|
|
tape->door_locked = DOOR_LOCKED;
|
|
}
|
|
}
|
|
unlock_kernel();
|
|
return 0;
|
|
|
|
out_put_tape:
|
|
ide_tape_put(tape);
|
|
unlock_kernel();
|
|
return retval;
|
|
}
|
|
|
|
static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
ide_tape_flush_merge_buffer(drive);
|
|
tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
|
|
if (tape->buf != NULL) {
|
|
idetape_pad_zeros(drive, tape->blk_size *
|
|
(tape->user_bs_factor - 1));
|
|
kfree(tape->buf);
|
|
tape->buf = NULL;
|
|
}
|
|
idetape_write_filemark(drive);
|
|
idetape_flush_tape_buffers(drive);
|
|
idetape_flush_tape_buffers(drive);
|
|
}
|
|
|
|
static int idetape_chrdev_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct ide_tape_obj *tape = filp->private_data;
|
|
ide_drive_t *drive = tape->drive;
|
|
unsigned int minor = iminor(inode);
|
|
|
|
lock_kernel();
|
|
tape = drive->driver_data;
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
|
|
idetape_write_release(drive, minor);
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
|
|
if (minor < 128)
|
|
ide_tape_discard_merge_buffer(drive, 1);
|
|
}
|
|
|
|
if (minor < 128 && test_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
|
|
&drive->atapi_flags))
|
|
(void) idetape_rewind_tape(drive);
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
|
|
if (tape->door_locked == DOOR_LOCKED) {
|
|
if (!ide_set_media_lock(drive, tape->disk, 0))
|
|
tape->door_locked = DOOR_UNLOCKED;
|
|
}
|
|
}
|
|
clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
|
|
ide_tape_put(tape);
|
|
unlock_kernel();
|
|
return 0;
|
|
}
|
|
|
|
static void idetape_get_inquiry_results(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
u8 pc_buf[256];
|
|
char fw_rev[4], vendor_id[8], product_id[16];
|
|
|
|
idetape_create_inquiry_cmd(&pc);
|
|
pc.buf = &pc_buf[0];
|
|
pc.buf_size = sizeof(pc_buf);
|
|
|
|
if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
|
|
printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
|
|
tape->name);
|
|
return;
|
|
}
|
|
memcpy(vendor_id, &pc.buf[8], 8);
|
|
memcpy(product_id, &pc.buf[16], 16);
|
|
memcpy(fw_rev, &pc.buf[32], 4);
|
|
|
|
ide_fixstring(vendor_id, 8, 0);
|
|
ide_fixstring(product_id, 16, 0);
|
|
ide_fixstring(fw_rev, 4, 0);
|
|
|
|
printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
|
|
drive->name, tape->name, vendor_id, product_id, fw_rev);
|
|
}
|
|
|
|
/*
|
|
* Ask the tape about its various parameters. In particular, we will adjust our
|
|
* data transfer buffer size to the recommended value as returned by the tape.
|
|
*/
|
|
static void idetape_get_mode_sense_results(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
u8 *caps;
|
|
u8 speed, max_speed;
|
|
|
|
idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
|
|
if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
|
|
printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
|
|
" some default values\n");
|
|
tape->blk_size = 512;
|
|
put_unaligned(52, (u16 *)&tape->caps[12]);
|
|
put_unaligned(540, (u16 *)&tape->caps[14]);
|
|
put_unaligned(6*52, (u16 *)&tape->caps[16]);
|
|
return;
|
|
}
|
|
caps = pc.buf + 4 + pc.buf[3];
|
|
|
|
/* convert to host order and save for later use */
|
|
speed = be16_to_cpup((__be16 *)&caps[14]);
|
|
max_speed = be16_to_cpup((__be16 *)&caps[8]);
|
|
|
|
*(u16 *)&caps[8] = max_speed;
|
|
*(u16 *)&caps[12] = be16_to_cpup((__be16 *)&caps[12]);
|
|
*(u16 *)&caps[14] = speed;
|
|
*(u16 *)&caps[16] = be16_to_cpup((__be16 *)&caps[16]);
|
|
|
|
if (!speed) {
|
|
printk(KERN_INFO "ide-tape: %s: invalid tape speed "
|
|
"(assuming 650KB/sec)\n", drive->name);
|
|
*(u16 *)&caps[14] = 650;
|
|
}
|
|
if (!max_speed) {
|
|
printk(KERN_INFO "ide-tape: %s: invalid max_speed "
|
|
"(assuming 650KB/sec)\n", drive->name);
|
|
*(u16 *)&caps[8] = 650;
|
|
}
|
|
|
|
memcpy(&tape->caps, caps, 20);
|
|
|
|
/* device lacks locking support according to capabilities page */
|
|
if ((caps[6] & 1) == 0)
|
|
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
|
|
|
|
if (caps[7] & 0x02)
|
|
tape->blk_size = 512;
|
|
else if (caps[7] & 0x04)
|
|
tape->blk_size = 1024;
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
#define ide_tape_devset_get(name, field) \
|
|
static int get_##name(ide_drive_t *drive) \
|
|
{ \
|
|
idetape_tape_t *tape = drive->driver_data; \
|
|
return tape->field; \
|
|
}
|
|
|
|
#define ide_tape_devset_set(name, field) \
|
|
static int set_##name(ide_drive_t *drive, int arg) \
|
|
{ \
|
|
idetape_tape_t *tape = drive->driver_data; \
|
|
tape->field = arg; \
|
|
return 0; \
|
|
}
|
|
|
|
#define ide_tape_devset_rw_field(_name, _field) \
|
|
ide_tape_devset_get(_name, _field) \
|
|
ide_tape_devset_set(_name, _field) \
|
|
IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
|
|
|
|
#define ide_tape_devset_r_field(_name, _field) \
|
|
ide_tape_devset_get(_name, _field) \
|
|
IDE_DEVSET(_name, 0, get_##_name, NULL)
|
|
|
|
static int mulf_tdsc(ide_drive_t *drive) { return 1000; }
|
|
static int divf_tdsc(ide_drive_t *drive) { return HZ; }
|
|
static int divf_buffer(ide_drive_t *drive) { return 2; }
|
|
static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
|
|
|
|
ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
|
|
|
|
ide_tape_devset_rw_field(debug_mask, debug_mask);
|
|
ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
|
|
|
|
ide_tape_devset_r_field(avg_speed, avg_speed);
|
|
ide_tape_devset_r_field(speed, caps[14]);
|
|
ide_tape_devset_r_field(buffer, caps[16]);
|
|
ide_tape_devset_r_field(buffer_size, buffer_size);
|
|
|
|
static const struct ide_proc_devset idetape_settings[] = {
|
|
__IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL),
|
|
__IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer),
|
|
__IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size),
|
|
__IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL),
|
|
__IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL),
|
|
__IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
|
|
__IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
|
|
mulf_tdsc, divf_tdsc),
|
|
{ NULL },
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* The function below is called to:
|
|
*
|
|
* 1. Initialize our various state variables.
|
|
* 2. Ask the tape for its capabilities.
|
|
* 3. Allocate a buffer which will be used for data transfer. The buffer size
|
|
* is chosen based on the recommendation which we received in step 2.
|
|
*
|
|
* Note that at this point ide.c already assigned us an irq, so that we can
|
|
* queue requests here and wait for their completion.
|
|
*/
|
|
static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
|
|
{
|
|
unsigned long t;
|
|
int speed;
|
|
int buffer_size;
|
|
u16 *ctl = (u16 *)&tape->caps[12];
|
|
|
|
drive->pc_callback = ide_tape_callback;
|
|
|
|
drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
|
|
|
|
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
|
|
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
|
|
tape->name);
|
|
drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
|
|
}
|
|
|
|
/* Seagate Travan drives do not support DSC overlap. */
|
|
if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
|
|
drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
|
|
|
|
tape->minor = minor;
|
|
tape->name[0] = 'h';
|
|
tape->name[1] = 't';
|
|
tape->name[2] = '0' + minor;
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
|
|
idetape_get_inquiry_results(drive);
|
|
idetape_get_mode_sense_results(drive);
|
|
ide_tape_get_bsize_from_bdesc(drive);
|
|
tape->user_bs_factor = 1;
|
|
tape->buffer_size = *ctl * tape->blk_size;
|
|
while (tape->buffer_size > 0xffff) {
|
|
printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
|
|
*ctl /= 2;
|
|
tape->buffer_size = *ctl * tape->blk_size;
|
|
}
|
|
buffer_size = tape->buffer_size;
|
|
|
|
/* select the "best" DSC read/write polling freq */
|
|
speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
|
|
|
|
t = (IDETAPE_FIFO_THRESHOLD * tape->buffer_size * HZ) / (speed * 1000);
|
|
|
|
/*
|
|
* Ensure that the number we got makes sense; limit it within
|
|
* IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
|
|
*/
|
|
tape->best_dsc_rw_freq = clamp_t(unsigned long, t, IDETAPE_DSC_RW_MIN,
|
|
IDETAPE_DSC_RW_MAX);
|
|
printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
|
|
"%lums tDSC%s\n",
|
|
drive->name, tape->name, *(u16 *)&tape->caps[14],
|
|
(*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
|
|
tape->buffer_size / 1024,
|
|
tape->best_dsc_rw_freq * 1000 / HZ,
|
|
(drive->dev_flags & IDE_DFLAG_USING_DMA) ? ", DMA" : "");
|
|
|
|
ide_proc_register_driver(drive, tape->driver);
|
|
}
|
|
|
|
static void ide_tape_remove(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
ide_proc_unregister_driver(drive, tape->driver);
|
|
device_del(&tape->dev);
|
|
ide_unregister_region(tape->disk);
|
|
|
|
mutex_lock(&idetape_ref_mutex);
|
|
put_device(&tape->dev);
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
}
|
|
|
|
static void ide_tape_release(struct device *dev)
|
|
{
|
|
struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
|
|
ide_drive_t *drive = tape->drive;
|
|
struct gendisk *g = tape->disk;
|
|
|
|
BUG_ON(tape->valid);
|
|
|
|
drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
|
|
drive->driver_data = NULL;
|
|
device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
|
|
device_destroy(idetape_sysfs_class,
|
|
MKDEV(IDETAPE_MAJOR, tape->minor + 128));
|
|
idetape_devs[tape->minor] = NULL;
|
|
g->private_data = NULL;
|
|
put_disk(g);
|
|
kfree(tape);
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
static int proc_idetape_read_name
|
|
(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
ide_drive_t *drive = (ide_drive_t *) data;
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
char *out = page;
|
|
int len;
|
|
|
|
len = sprintf(out, "%s\n", tape->name);
|
|
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
|
|
}
|
|
|
|
static ide_proc_entry_t idetape_proc[] = {
|
|
{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
|
|
{ "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL },
|
|
{ NULL, 0, NULL, NULL }
|
|
};
|
|
|
|
static ide_proc_entry_t *ide_tape_proc_entries(ide_drive_t *drive)
|
|
{
|
|
return idetape_proc;
|
|
}
|
|
|
|
static const struct ide_proc_devset *ide_tape_proc_devsets(ide_drive_t *drive)
|
|
{
|
|
return idetape_settings;
|
|
}
|
|
#endif
|
|
|
|
static int ide_tape_probe(ide_drive_t *);
|
|
|
|
static struct ide_driver idetape_driver = {
|
|
.gen_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "ide-tape",
|
|
.bus = &ide_bus_type,
|
|
},
|
|
.probe = ide_tape_probe,
|
|
.remove = ide_tape_remove,
|
|
.version = IDETAPE_VERSION,
|
|
.do_request = idetape_do_request,
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
.proc_entries = ide_tape_proc_entries,
|
|
.proc_devsets = ide_tape_proc_devsets,
|
|
#endif
|
|
};
|
|
|
|
/* Our character device supporting functions, passed to register_chrdev. */
|
|
static const struct file_operations idetape_fops = {
|
|
.owner = THIS_MODULE,
|
|
.read = idetape_chrdev_read,
|
|
.write = idetape_chrdev_write,
|
|
.ioctl = idetape_chrdev_ioctl,
|
|
.open = idetape_chrdev_open,
|
|
.release = idetape_chrdev_release,
|
|
};
|
|
|
|
static int idetape_open(struct block_device *bdev, fmode_t mode)
|
|
{
|
|
struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk);
|
|
|
|
if (!tape)
|
|
return -ENXIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int idetape_release(struct gendisk *disk, fmode_t mode)
|
|
{
|
|
struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);
|
|
|
|
ide_tape_put(tape);
|
|
return 0;
|
|
}
|
|
|
|
static int idetape_ioctl(struct block_device *bdev, fmode_t mode,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
|
|
ide_drive_t *drive = tape->drive;
|
|
int err = generic_ide_ioctl(drive, bdev, cmd, arg);
|
|
if (err == -EINVAL)
|
|
err = idetape_blkdev_ioctl(drive, cmd, arg);
|
|
return err;
|
|
}
|
|
|
|
static struct block_device_operations idetape_block_ops = {
|
|
.owner = THIS_MODULE,
|
|
.open = idetape_open,
|
|
.release = idetape_release,
|
|
.locked_ioctl = idetape_ioctl,
|
|
};
|
|
|
|
static int ide_tape_probe(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape;
|
|
struct gendisk *g;
|
|
int minor;
|
|
|
|
if (!strstr("ide-tape", drive->driver_req))
|
|
goto failed;
|
|
|
|
if (drive->media != ide_tape)
|
|
goto failed;
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_ID_READ) &&
|
|
ide_check_atapi_device(drive, DRV_NAME) == 0) {
|
|
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
|
|
" the driver\n", drive->name);
|
|
goto failed;
|
|
}
|
|
tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
|
|
if (tape == NULL) {
|
|
printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
|
|
drive->name);
|
|
goto failed;
|
|
}
|
|
|
|
g = alloc_disk(1 << PARTN_BITS);
|
|
if (!g)
|
|
goto out_free_tape;
|
|
|
|
ide_init_disk(g, drive);
|
|
|
|
tape->dev.parent = &drive->gendev;
|
|
tape->dev.release = ide_tape_release;
|
|
dev_set_name(&tape->dev, dev_name(&drive->gendev));
|
|
|
|
if (device_register(&tape->dev))
|
|
goto out_free_disk;
|
|
|
|
tape->drive = drive;
|
|
tape->driver = &idetape_driver;
|
|
tape->disk = g;
|
|
|
|
g->private_data = &tape->driver;
|
|
|
|
drive->driver_data = tape;
|
|
|
|
mutex_lock(&idetape_ref_mutex);
|
|
for (minor = 0; idetape_devs[minor]; minor++)
|
|
;
|
|
idetape_devs[minor] = tape;
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
|
|
idetape_setup(drive, tape, minor);
|
|
|
|
device_create(idetape_sysfs_class, &drive->gendev,
|
|
MKDEV(IDETAPE_MAJOR, minor), NULL, "%s", tape->name);
|
|
device_create(idetape_sysfs_class, &drive->gendev,
|
|
MKDEV(IDETAPE_MAJOR, minor + 128), NULL,
|
|
"n%s", tape->name);
|
|
|
|
g->fops = &idetape_block_ops;
|
|
ide_register_region(g);
|
|
|
|
return 0;
|
|
|
|
out_free_disk:
|
|
put_disk(g);
|
|
out_free_tape:
|
|
kfree(tape);
|
|
failed:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __exit idetape_exit(void)
|
|
{
|
|
driver_unregister(&idetape_driver.gen_driver);
|
|
class_destroy(idetape_sysfs_class);
|
|
unregister_chrdev(IDETAPE_MAJOR, "ht");
|
|
}
|
|
|
|
static int __init idetape_init(void)
|
|
{
|
|
int error = 1;
|
|
idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape");
|
|
if (IS_ERR(idetape_sysfs_class)) {
|
|
idetape_sysfs_class = NULL;
|
|
printk(KERN_ERR "Unable to create sysfs class for ide tapes\n");
|
|
error = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
|
|
printk(KERN_ERR "ide-tape: Failed to register chrdev"
|
|
" interface\n");
|
|
error = -EBUSY;
|
|
goto out_free_class;
|
|
}
|
|
|
|
error = driver_register(&idetape_driver.gen_driver);
|
|
if (error)
|
|
goto out_free_driver;
|
|
|
|
return 0;
|
|
|
|
out_free_driver:
|
|
driver_unregister(&idetape_driver.gen_driver);
|
|
out_free_class:
|
|
class_destroy(idetape_sysfs_class);
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
MODULE_ALIAS("ide:*m-tape*");
|
|
module_init(idetape_init);
|
|
module_exit(idetape_exit);
|
|
MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR);
|
|
MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
|
|
MODULE_LICENSE("GPL");
|